ATI Radeon 2600 XT on Mac Pro 2008 has died

Hi All,
I have recently been having issues with one of my ATI Radeon 2600 XT Graphics cards - choppy graphics, artefacts appearing on the display and endless crashes of the OS.
I have read online about a recall program Apple did run which recalled these exact graphics cards, and after checking the serial number of the card in question, it does indeed match one of the 'bad' batch.
The only problem is - the program ended in July 2011
What are the chances Apple would be kind enough to still swap my card for a new unaffected one?
Thanks
Mac Pro (early 2008)
6GB Memory
2 x ATI Radeon 2600XT
2 x 23" Cinema HD Monitors

What are the chances Apple would be kind enough to still swap my card for a new unaffected one?
I'm in the same boat. :\ Mine just died too, would I need to take my tower to an Apple Store? Or how would I go about asking Apple to replace my graphics card?
Also, if I were to put in a different graphics card (say the ATI Radeon HD 5770), how difficult is it to replace? Would my Mac Pro (Early 2008) be able to handle it? I have 2x2.8GHz Quad-Core Intel Xeon (8-core) processor, the ATI Radeon HD 5770 says it requires Mac Pro (Mid 2010) with PCI Express 2.0 slot and OS X 10.6.4, whereas I'm still on just 10.5 Leopard and have an Early 2008 model...
On another thread, here, The Hatter, said something about baking the card in the oven? Would that work if Apple won't replace it for free?
I have never opened up my tower before (I don't know how!) and I have been wanting to upgrade my RAM as well. I have 4x1GB cards and I wanted to move up to like 8 or 16GB. I was thinking about buying RAM from NewEgg or Amazon, whichever is cheaper, any suggestions?
Thank you for any help and sorry about hijacking the thread! >~< Should I make my own thread or continue in this one? I'm sorry, I just don't want to cause any problems...I will make a new one if need be.

Similar Messages

Problems after upgrading to ATI radeon 5770 in my mac pro 2008

Hi
Day one
I have upgraded my graphic card to ATI radeon 5770 in my MacPro 2008.
4 hours of installing the screen went blank with noice and line, like it happens in telivison when there is no signal.
Day two
Same thing happened when I started my computer.
does anybody know a soluton to this problem?
please help.
nsnaveen

Mac Pro community is here.
Did you try Apple Hardware Test by extended testing?
I suppose graphic card is something wrong.

ATI Radeon HD5770 in a Mac Pro?

A couple of months ago I upgraded my Mac Pro (early 2008) with a new graphics card, the ATI Radeon HD5770 (Apple version). It's been working fine on my MP with FCS3 and my system in general.
A week or two ago I purchased the Master Collection CS5.5 and I'm starting to work with Premiere Pro. Searching the Adobe site I just found that my nearly new (made-for-Mac) ATI card is not supported by Premiere Pro. What does that mean when I use PrP, After Effects, or any of the other Adobe products?
There are only two Adobe approved video cards sold by Apple. Both are over $1000.
What kinds of catastrophes should I expect if I continue to use my OpenCL ATI Radeon HD 5770 card with PrP, AE, or any of the other MC programs?
Thank you in advance for your help.

I thought it might affect other parts of the suite. In any event, I'll take your advice and post there.
Thank you.

ATI Radeon 5770 in 2006 Mac Pro with Lion

Hit an issue with my 2006 Mac Pro when the video card died in late October. At that point I was running Lion and had kept on top of software updates. Being on a restricted budget, I have purchased and installed an ATI Radeon 5770 card from the Apple store as I cannot afford a new Mac Pro. I knew that before I did this there may be incompatability problems with this card and Lion on the older Mac Pros, and this seems to be the case.
However, having trawled through the forums it seems some users are able to run this card on 1.1 machines with Lion. So I am now wondering if I have another issue - I'd much rather stick with Lion if I can rather than revert to Snow Leopard. Now I have installed the card things seem fine with the display - the 30" cinema display no longer has blocks of pixels all over it. On boot up the screen is a pale grey, the Apple logo appears in the centre with the busy timer underneath. I also get a loading bar for about 20 seconds. This gets to about 20% then disappears. Everything sounds like the machine is booting normally but it just won't progress beyond this point. I have tried holding shift to boot it in safe mode but the same things happens.
If anyone can help point me in the right direction of what I should try next I'd be profoundly grateful!
Vinny

I knew that before I did this there may be incompatibility problems with this card and Lion on the older Mac Pros,
Although some users have complained of problems, their wounds may be self-inflicted. Use of a non-Apple ATI 5770 or failure to upgrade to at least 10.6.5 are high on the list. The main "issue", if you can even call it that, is the card runs more slowly than its published benchmarks due to PCIe 1 slots in the Mac Pro 1,2 and 2,1.
I also get a loading bar for about 20 seconds. This gets to about 20% then disappears.
That progress bar is indicative of unresolved Hard Drive problems. You need to boot to an alternate source of software (Hold Command-R at startup for Recovery_HD if you are running later than 10.6.8) and check the SMART Status and then select Macintosh_HD or whatever you renamed it and ( Repair Disk ). Repeat until all problems are resolved or it gets stuck. If you need help, copy the EXACT error message back here.

Mac Pro 2008 error on boot

Hello,
My Mac Pro 2008 has become very unstable. It reboots on shut down, briefly wakes from sleep repeatedly and has resently been displaying the error below on boot.
I've done a fresh install + removed everything thats not essential. Tried a PRAM and SMC reset.
Any help would be much appriciated!
Thanks

Sorry! Worlds slowest reply.
You were spot on and removing it worked a treat.
I've been having a lot of problems with permissions changing so no apparent reason. Have you heard of anything like that happening on fresh(ish) installs of Mavericks?
Things like ACL appearing on everything in my Applications folder!?
Thanks.

I have an early 2008 Mac Pro, 8 gb ram with a Dell 27" display and a 42" LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs. Does anyone have any suggestions on the best card?

I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
Thanks,
Kevin

I recommend you install nothing older than the Apple-firware 5770, about US$250.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Mac Pro 2008 and ATI Radeon HD 5770

According to many other threads in this forum the ATI Radeon HD 5770 graphics card is said to work fine with the Mac Pro 2008 (model no. 3,1) though the Apple Store lists the Mac Pro (Mid 2010) under system requirements. Well, before I’m going to upgrade my Mac against Apple’s will, I’m just curious to know if anyone has found out why Apple restricts the compatibility to Macs from mid 2010 on. Is there an issue that affects only a small number of machines? Or is there a software incompatibility popping up under rare circumstances? What is the reason for this? Why does Apple not grant downward compatibility?

Apple does marketing and doesn't do a bang-up job on writiing technical requirements on hardware upgrades and testing. It doesn't make sense, there is no reason for not just "works with 10.6.5 or later on ALL Mac Pro models."
something nice and clear and so avoids all the questions and discussion.
Radeon HD 5870 versus 5770
2008 has PCIe 2.0 so no lose of bandwidth.
And I guess you ignored the numerous comment section on the product page? where people said it works.
ATI Radeon HD 5770 MC742ZM A

My Mac pro tower has an "ATI Radion hd 2600 XT" video card, and it stopped getting signal to my tv, are there common problems known? How can I troubleshoot this problem when the signal isn't reaching the screen?

My Mac pro tower has an "ATI Radion hd 2600 XT" video card, and it stopped getting signal to my tv, are there common problems known? How can I troubleshoot this problem when the signal isn't reaching the screen?

http://discussions.info.apple.com/thread.jspa?messageID=12248238&#12248238
http://discussions.apple.com/thread.jspa?threadID=2649035&tstart=0

I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
Robert

When you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Mac Pro 2008 always crash after sleep and after first start

Hello, new in the forum,
2 years ago, I replaced the main disk of a Mac Pro 2008 for a SSD Samsung 470 256 Go.
Until then, it always crashed 1 or 5 minutes after sleep mode (which I didn't used much), and not always 10 to 15 minutes after the first start of the day.
No matter if I was working on it or not… Suitcase installed or not (no font problem here). Rest of the day was fine (if no sleep !).
The difference of speed was so big and "good" that I dealed with it. I though that the Mac Pro was a little old for the SSD technology, and that Apple would fix it, with chance…
2 weeks ago, I installed Maverick :
I got crashs during the work flow too. I needed to re-start 3 times at least… Re-start without extension was ok (or not), re-start, crash, re-start without extension, restart ok. I used Onyx, did PRAM too. And sometimes, I needed to re-install Maverick or even to do a clean-install !
So I suspected the Samsung 470 for all (sleep and work crashs) and replaced it for a Samsung 840 Pro 512 Go.
And the Mac Pro returned to Mountain Lion.
Not really better : no crash one day (yeeeees!) and crash after the first start the next day (nooooo!). Every time I tested sleep mode, it crashed.
My system :
Mac Pro 3.1 - 2,8 GHz - Quad
Mountain Lion, 10 Go ram DDR2, ATI Radeon HD 2600 XT, 30' cinema display.
Adobe CS5 alone (minimal install) with Onyx to repair after each crash.
Could it be the video card, the mother board, the age of the boy ?
Thanks a lot !
Christophe S

Edit !
I said that Finder and apps were blocked after 10 seconds (without extension).
But it was to clic on Launchpad that blocked all, and 5 minutes later it works again.
I did clic again on Launchpad, it blocked and 2 minutes later it appeared full screen but with rainbow circle, and quit.
- Restarted with extensions. Kernel panic!
- Restarted the mac and the grey screen with Apple blocked, without any mouse this time. 15 minutes later, still blocked.
- Forced restart without extension. Here are the reports of Kernel Panic and EtreCheck:
Kernel Panic Report:
Interval Since Last Panic Report: 122463 sec
Panics Since Last Report:          1
Anonymous UUID:                    52E60929-F5AE-D9CD-04B0-1872526C0821
Mon Oct 13 10:58:17 2014
panic(cpu 3 caller 0xffffff8007cb8945): Kernel trap at 0xffffff8007ef69e0, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x000000000000008a, CR3: 0x000000002f749000, CR4: 0x0000000000000660
RAX: 0xffffff80209bb7e8, RBX: 0xffffff801fc6d808, RCX: 0x0000000009000000, RDX: 0xffffff801fc6dde0
RSP: 0xffffff8131b7bbc0, RBP: 0xffffff8131b7bc00, RSI: 0x00000000000c43ff, RDI: 0xffffff801fc6dde0
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80220fbfa4, R11: 0x0000000000000020
R12: 0xffffff801fc6dde0, R13: 0x00000000000c43ff, R14: 0x00000000000c43ff, R15: 0x0000000000000002
RFL: 0x0000000000010202, RIP: 0xffffff8007ef69e0, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000008a, Error code: 0x0000000000000000, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff8131b7b860 : 0xffffff8007c1d636
0xffffff8131b7b8d0 : 0xffffff8007cb8945
0xffffff8131b7baa0 : 0xffffff8007ccebfd
0xffffff8131b7bac0 : 0xffffff8007ef69e0
0xffffff8131b7bc00 : 0xffffff8007eee0d6
0xffffff8131b7be00 : 0xffffff8007d1a5d6
0xffffff8131b7be60 : 0xffffff8007d092aa
0xffffff8131b7bf50 : 0xffffff8007fe97ba
0xffffff8131b7bfb0 : 0xffffff8007ccf453
BSD process name corresponding to current thread: mdworker
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide:     0x0000000007a00000
Kernel text base: 0xffffff8007c00000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 121192507210
last loaded kext at 8889944220: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f899fe000, size 28672)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.4.7fc4
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.iokit.IOBluetoothSerialManager 4.1.7f4
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDA 2.4.7fc4
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 8.1.6
com.apple.driver.AppleUSBDisplays 357
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.ATIRadeonX2000 8.1.6
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.CSRHIDTransitionDriver 4.1.7f4
com.apple.driver.PioneerSuperDrive 3.3.1
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AppleUSBHub 635.4.0
com.apple.driver.AppleIntel8254XEthernet 3.1.1b1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleUSBUHCI 621.4.0
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.4.7fc4
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.7f4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.4.7fc4
com.apple.iokit.IOHDAFamily 2.4.7fc4
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.kext.AMD2600Controller 8.1.6
com.apple.kext.AMDSupport 8.1.6
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d13
com.apple.driver.AppleUSBHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.driver.AppleUSBHIDKeyboard 170.2.4
com.apple.driver.AppleHIDKeyboard 170.2.4
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 635.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Bluetooth: Version 4.1.7f4 12974, 3 service, 12 devices, 0 incoming serial ports
PCI Card: ATI Radeon HD 2600, sppci_displaycontroller, Slot-1
Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
Serial ATA Device: ST31000524AS, 1 TB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: hub_device, apple_vendor_id, 0x9120, 0xfd500000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd520000 / 4
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd521000 / 6
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd522000 / 5
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x9220, 0xfd530000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: unknown_device, unknown_speed
Report EtreCheck :
Description du problème :
Here is the report of EtreCheck after the Kerner Panic sent before.
Christophe.s
EtreCheck version : 2.0.2 (86)
Rapport créé 13 octobre 2014 11:23:31 UTC+02:00
Informations matérielles : ℹ️
Mac Pro (début 2008)
Mac Pro - modèle : MacPro3,1
2 2.8 GHz Quad-Core Intel Xeon CPU : 8-core
10 GB RAM Pas extensible
DIMM Riser B/DIMM 1
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 2
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 1
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 2
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 3
empty empty empty empty
DIMM Riser B/DIMM 4
empty empty empty empty
DIMM Riser A/DIMM 3
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 4
2 GB DDR2 FB-DIMM 800 MHz ok
Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
Informations vidéos : ℹ️
ATI Radeon HD 2600 - VRAM : 256 MB
Cinema HD Display 2560 x 1600
Logiciel du système : ℹ️
OS X 10.8.5 (12F45) - Uptime: un jour 0:11:6
Informations des disques : ℹ️
Samsung SSD 840 PRO Series disk0 : (512,11 GB)
Statut S.M.A.R.T. : Vérifié
disk0s1 (disk0s1) <non monté> : 210 Mo
MacPro SSD (disk0s2) / [Startup] : 511.25 Go (472.61 Go libre)
Recovery HD (disk0s3) <non monté> [Restauration] : 650 Mo
ST31000524AS disk1 : (1 TB)
Statut S.M.A.R.T. : Vérifié
disk1s1 (disk1s1) <non monté> : 210 Mo
MacPro 1To (disk1s2) /Volumes/MacPro 1To : 999.35 Go (633.08 Go libre)
Recovery HD (disk1s3) <non monté> [Restauration] : 650 Mo
Informations USB : ℹ️
Verbatim Portable USB Drive 320,07 GB
Statut S.M.A.R.T. : Vérifié
disk3s1 (disk3s1) <non monté> : 210 Mo
320 Go Christophe Syren (disk3s2) /Volumes/320 Go Christophe Syren : 319.73 Go (313.64 Go libre)
USB 2.0 USB Flash Drive 8,17 GB
Statut S.M.A.R.T. : Vérifié
SANS TITRE (disk2s1) <non monté> : 8.17 Go
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Apple Inc. Bluetooth USB Host Controller
Gatekeeper : ℹ️
Mac App Store et développeurs identifiés
Représentants de lancement : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.CS5ServiceManager.plist Aide
[désengagé] com.extensis.FMCore.plist Aide
Daemons de lancements : ℹ️
[invalid?] com.adobe.SwitchBoard.plist Aide
Représentants de lancement pour l’utilisateur : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.ARM.[...].plist Aide
Éléments Ouverture : ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Plug-ins internet : ℹ️
OfficeLiveBrowserPlugin : Version : 12.3.6 Aide
AdobePDFViewer : Version : 9.5.5 Aide
QuickTime Plugin : Version : 7.7.1
JavaAppletPlugin : Version : 14.9.0 - SDK 10.7 Vérifier la version
Panneaux de préférences de 3ème partie : ℹ️
Growl Aide
Time Machine : ℹ️
Skip System Files: NO
Sauvegarde automatique : OUI
Disques sauvegardés :
MacPro SSD : Taille de disque : 511.25 Go Disque utilisé : 38.64 Go
Destinations :
Data [Network]
Taille totale : 2 To
Nombre de sauvegardes total : 9
Sauvegardes la plus agée : 2014-10-08 01:39:21 +0000
Dernière sauvegarde : 2014-10-10 11:31:35 +0000
Taille de la disque de sauvegarde : Excellent
Taille de sauvegarde 2 To > (Taille de disque 511.25 Go X 3)
L’utilisation du CPU par processus : ℹ️
      1% WindowServer
      0% ps
      0% fontd
      0% System Events
      0% coreservicesd
L’utilisation de la mémoire par processus : ℹ️
97 Mo Dock
97 Mo Finder
75 Mo WindowServer
64 Mo com.apple.security.pboxd
64 Mo CalendarAgent
Informations de la mémoire virtuelle : ℹ️
523 Mo RAM Disponible
1.04 Go RAM Active
307 Mo RAM Inactive
8.86 Go RAM Résidente
266 Mo Pages entrants
0 o Sorties pages

Mac Pro 2008 Apple Cinema Displays are black and there are start up issues

I have a Mac Pro 2008 Dual quad 2.8 GHz. I have two Apple Cinema Displays (graphics are the standard ATI Radeon HD 2600 – 2 dual link DVI. I have 4 2-GB RAM sticks (8 GB total).
Neither of my displays are showing anything. Their power lights are on but they are completely black throughout the start up process. In addition when I try to boot up with both graphics cards installed, I get nothing – no beeps no chimes. If just one card is installed (either card in either slot) the computer beeps, chimes and makes the sounds of booting up, but not a flicker on the displays. RAM does not seem to be the issue as I have tried booting with several configurations of RAM sticks with no negative or positive effects. I tried booting up with Hard Drives 1 & 2 removed with no effect. I have tried several different start up moods and have reset PRAM.
My guess is that there is something wrong with the motherboard. Or is it possible that both graphics cards are bad?

The "least intensive" thing you can do is hold down Alt/Option at Startup. Thsi invokes the all-in-ROM Startup Manager, which will light up the screen gray or blue, then attempt to draw an Icon for each potentially-bootable Volume attached (if any). It works as if in slow motion, so you must be patient. If no activity after about two minutes you may count that as a failure.
The next most intensive is to attempt to boot from an incorruptible source of software, such as an Installer/Utilities DVD. This again uses the "one-size-fits-all" display driver, and attempts to load software off the DVD. The dark colored Apple is loaded off a drive -- it is not present inside your Mac.
The next most intensive step is to attempt to boot into Safe Mode. This also uses the "one-size-fits-all" display Driver, and does a disk check as it starts up, adding five minutes to the startup time. It then drwas a login screen and deamds your username and password, even if you normally auto-login.

ATI Radeon 2600 XT Fan Noise

I just received my new Mac Pro on Friday - it shipped with 10.5.4 installed. After looking at some of the new features of Leopard (had only used Tiger previously), I installed all the available updates -- these were:
Mac OS X Update 10.5.5
Aluminum Keyboard Firmware Update 1.0
Java For Mac OS X 10.5 Update 2
iTunes 8.0
Digital Camera Raw Compatibility Update 2.2
QuickTime 7.5.5
Remote Desktop Client Update 3.2.2
Front Row Update
All the updates were successful and no issues were apparent until this morning. The fan on the graphics card (ATI Radeon 2600 XT) now seems to be running at full speed, regardless of what is running. Just idling at the Desktop the fan still runs at full speed. A soft reset of the SMC has also been done - no change. Is this a known issue? Is anybody else experiencing this? I've also posted my temps below:
Ambient Air 24.0C
CPU A Temperature Diode 34.0C
CPU B Temperature Diode 35.0C
CPU C Temperature Diode 35.0C
CPU D Temperature Diode 35.0C
CPU A Heatsink 32.0C
CPU B Heatsink 32.0C
Hard Drive Bay 1 28.0C
Hard Drive Bay 2 26.0C
Hard Drive Bay 3 27.0C
Hard Drive Bay 4 27.0C
Memory Bank A Point 1 35.0C
Memory Bank A Point 2 33.0C
Memory Bank A Point 3 34.0C
Memory Bank B Point 1 35.0C
Memory Bank B Point 2 37.0C
Memory Bank B Point 3 35.0C
Memory Module A1 48.0C
Memory Module B1 48.0C
Northbridge Heat Sink 38.0C
Expansion Slots 35.0C
Power Supply Location 1 46.0C
Power Supply Location 2 40.0C

I don't know what is happening with ATI, at first I thought it was the consolidation and merger that affects products and Q&A, but the X1900, then the 2600XT, and even the 3870's fans and noise (which after 3 months seems to be better now on the 3870 with the latest models rolling out).
Normally I would expect a new or even ref'd unit would have the latest fixes and if there still are problems... then there aren't any solutions? One person dropped into Vista and reduced fans to 20% setting and it works even under heavy loads w/o getting above 80C.
Seems like the Nvidia 8800GT costs more, doesn't have the drivers optimized for OpenGL just yet, but runs quieter.
One person complained theirs would making an annoying "up-down-up" fan revving constantly.
A copper cooling kit isn't a option user should have to invest in. Not sure it works with 2600 -
"The Accelero S1 Rev. 2 dramatically extends the compatibility to many of the latest graphic cards. It supports high-end to main stream graphic cards including the latest hot selling Radeon HD 3870, 3850 , GeForce 8800GTS (G92) and 8800GT. http://www.arctic-cooling.com/vga2.php?idx=147
http://www.xlr8yourmac.com/Graphics/8800GTAcceleroS1/8800GTAcceleroS1R2.html

Cant use ati radeon 2600

I have a first edition mac pro, I was told that the ati radeon 2600 would work in it but I can't get it to work. The screen is fuzzy and none of my games will detect it. Do I need to upgrade to leopard to use it.

If you can find someone with Leopard and copy the Radeon 2xxx drivers from the Extensions folder, it might work okay under Tiger. But the card (and drivers) was designed to work under Leopard.

ATI Radeon 2600 graphics artifacts

I have a new MacPro with the ATI Radeon 2600 in it. Occasionally, (perhaps 3 times in 5 months)the screen will go completely wacky, with the whole screen turning like a tie die, except not as cool. A restart seems to fix the problem. Right now I am running EFI firmware version 01.00.236. There is an update (to .252) that I have been avoiding because of the increased fan noise and other complaints I have read about, I was hoping for a newer firmware to be released.
Are there MacPro users who have had the card issue, and had it fixed by the new firmware, and is there issues with the .252 firmware that make it worth avoiding?

I'm experiencing issues with my new Mac Pro as well, bought it this month. It has the default everything except I've added 8GB OWC ram. Everything passes apple hardware test, multiple times, but a few times now my open windows (all applications) have become "messed up". For example, this is Safari:
http://img352.imageshack.us/my.php?i...icture1zf3.png
http://img89.imageshack.us/my.php?image=picture2sf9.png
Is this similar to what everyone is seeing?

Adding USB 2.0 ports to a Mac Pro 2008

Hi,
I love my Mac Pro 2008! Great machine, awesome performance, but I need more ports Who needs only three USB ports in the back, that's a joke!
Anyways, I just bought 2 StarTech 6-port USB 2.0 PCI cards from an online vendor, but quickly found out that it didn't fit my Mac. The description of the card even says it is compatible with Mac OS X. I suspect that Apple have changed the PCI slots for something else in the Mac Pro 2008. What are they and can we buy USB card that fit those slots? If so where? I am desperate for more ports.

You may have stumbled upon or checked some of the support pages?
http://www.apple.com/support/macpro/
- which has a link to an article titled "about your PCI Express slots"
http://docs.info.apple.com/article.html?artnum=304122
Specs 2008: http://support.apple.com/kb/SP11:
PCI Express expansion7
Three open full-length PCI Express expansion slots
One PCI Express 2.0 x16 slot
Two PCI Express x4 slots
And of course support for up to four PCI Express video cards; Fibre Channel; Mac Pro RAID.
You could install a powered USB hub, or FW/USB2, as long as you have free slots for more. I have FW800, a 1x Sonnet Tempo (couple storage drives), and a 4x Tempo (multiple RAID sets; Port Multiplier card and multi-drive enclosures and 4 channels).

ATI Radeon 2600 XT on Mac Pro 2008 has died

Similar Messages

Maybe you are looking for