ATI Radeon 3870 HD Video/X-Fi extreme Music Issu
Here is a new problem that so far no one has any ideas about.
Got a new Radeon 3870 HD, and it works great, BUT ever since i intalled this card i can not run 5. speaker configuration because all i get is real bad noise and distortion, sometimes the sound cutting out all together. I have tried both the vid card in both PCIe slots and X-FI in different PCI Slots but that didnt help, i have the latest driver version for everything on my system. It works fine in 2 speaker mode and 4 speaker mode. Switched to onboard sound and i have no problems running 5..... This video card also has a realtek HD audio chip on it to output sound through an HDMI cable. Im thinking htere is some sort of conflict between the HD Audio drivers and the X-Fi drivers causing this problem. Disabling this HD audio on the Vid card in device manager helps the problem a little bit, but does not fix it. I have even made sure that the X_Fi was set as default audio device.
Here is my basic system configuration:
Vista Ultimate 64bit, 3 GB RAM, Radeon 3870 HD Video, X-Fi extreme music, Nforce 4 x6 MoBo.
Im thinking its a low level driver issue causing problems with the onboard HD audio on the vid card.
lpenix wrote:
hi i had a simular peoblem with the xfi music, and the hd 3870. i could not get my xfi to work at all, in device manager it kept saying error code 0 . in device manager there was a hd audio that i could not uninstall to save my life i thought it was the on board audio for the motherboard. but after i read your email it clicked, i uninstalled the ati drivers and rebooted the machine and bam the xfi started working, then installed the ati drivers, and i think it fixed it. i still get some strange noise sometimes, and i think it is because of the hd audio, i wish their was a way to uninstall it , if you do it in divice manager, it just comes back .
You've got do disable your onboard sound in your bios.
Similar Messages
-
ATI Radeon 3870 for photomation pan/scan/zoom
Hi all,
I'm thinking about upgrading to the ATI Radeon 3870, but before I commit I would like to know if it will help with faster renders on the photo pan/scan/zoom (i.e. Ken Burns) style moves that make up the bulk of my work. I know it's good for Motion, but what I'm really after is speed on FCP renders for photos that have keyframe animated scale, rotation, and position parameters, as well as basic filters and transitions.
Thanks!I don't know what your workflow is, but I've animated hundreds of photos in Motion before without problem. And if I'm dealing with a long sequence (one was about 25 minutes long), I simply break it up into manageable pieces of 4-5 minutes long and reassemble in FCP. I could do all that and still be finished before I had the chance to animate a third of the photos in FCP alone.
To me, speed is a primary concern because obviously time is money. But as I said, I don't know how your workflow differs.
Andy -
Where can I find 24" ATI RADEON HD 4850 video card or if there is one compereble to it or does Aple replaces with new one, because ATI RADEON HD 2600 has been recognised as deffective by Apple and APPLE replaces for free. Thanks
http://www.amd.com/us/products/notebook/graphics/Pages/notebook-graphics.aspx is a starting point.
-
ATI Radeon X1950 Pro video card and Quicktime Pro
In an earlier thread, I found out that the reason Quicktime Pro was not working on my new computer is that Apple has not yet worked out incompatibilities with QT Pro and new nVidia video cards. Since I need the QT Pro to do my movie editing work, I am going to switch to another high end video card. Does anyone know if an ATI Radeon X1950 Pro video card works with QT Pro? If not, is there another high-end card that someone can recommend?
ThanksSounds like you need a bigger case.
Or
External hard drive enclosure to house your drives. -
ATI Radeon 9000 Pro video card is conflicting with additional memory
I have a ATI Radeon 9000 Pro video card. I have a 645E Max motherboard (MS-6547). I recently purchased a 512MB dimm of Kingston PC2700 Cas 2.5 memory (KVR333X64C25/512) to go with the the 256MB dimm of the same model # above. I installed the memory and my screen stays blank. When I remove the new dimm it runs fine. I did get the memory and the motherboard tested at the store where I got the motherboard and they work fine. I came to the conclusion it was my video card when I removed all my components except the memory and the video card, and turned on the machine,nothing. I did try swiching dimm location and changing any bios settings I thought would make it work. I tried updating the video card drivers and motherboard AGP drivers. If anybody had this problem in the past could you tell me how you got it to work.
I took the board and the 2 dimms to the store where I bought them. They hooked up both dimms and a video card to the board. When it was powered up, both dimms were recognized. After I got home I proceded to determine if another component it conflicting with the memory. I started with both dimms and my video card the Radeon. I powered up with no other hardware connected and the screen remains blank. I remove the 512MB dimm and leave the 256MB dimm in, and powered up and pc booted up normally.
-
Will the ATI Radeon 3870 help with my photo processing?
I have a Quad 2.66 Mac Pro with 7Gb of RAM and about 3Tb of HD space. It also has the stock NVidia GeForce 7300GT video card in it (256Mb VRAM). Over the past 6 weeks or so, I've noticed that general photo processing functions in Lightroom and Photoshop have started to crawl (I use LR 2.2 and PS CS4 on 10.5.6). Simple tasks as switching from one image to another or going applying relatively light filters cause the spinning ball to appear for upwards of 20 seconds. This never used to happen.
Full disclaimer: I have started processing RAW images taken with my Canon 5D Mark II which are around 25Mb a pop and doing heavy HDR work that creates 400-500mb TIFF files. Also, my current video card is driving a Dell 30" LCD and a Dell 24" LCD.
I was hoping to be able to breathe new life into this Mac Pro until Apple released a refresh to the line (which I assume will be within the next few months as it is due for an update).
So, my question is: should I expect a performance jump by upgrading the video card to the 3870? I am seeing a lot of comments re: fan noise but I'd be willing to put up with it if I can see a marked performance boost.
Thanks for your help, everyone!
BrianI would try a couple things:
Upgrade RAM to 4 x 2GB plus (maybe 4 x 1GB from what you have) for 12GB.
Scratch disk with Spotlight disabled, using a couple drives dedicated stipped RAID.
Pull the 7300GT for now, maybe replace it with ATI Radeon 2600.
http://www.barefeats.com/harper16.html
The benefit of the 3870 is there, but maybe not in ways you wanted or expect (and until GPGPU and other features come to CS4/5 and Snow Leopard).
http://www.macrumors.com/2008/06/15/snow-leopards-grand-central-and-opencl-detai ls/
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb405745&sliceId=2
http://www.adobe.com/go/kb401089
http://homepage.mac.com/boots911/.Public/PhotoshopAccelerationBasics2.4W.pdf
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html -
Ati Radeon 3870 installation questions.
Hi,
I've just ordered a Ati Radeon HD 3870 to replace my nVidia 8800gt in my 2008 2.8ghz Mac Pro.
My question is:
Do i use the internal Power cable that is currently plugged into the 8800gt or the cables that come with the 3870?
I've also sold the 8800gt on ebay so does the current cable have to go with the card?
Also do i need to install the drivers that come with the 3870 or are they in os x?
Reading through bloggs and posts about this people also can't seem to decide weather to install the drivers first or install the card first.
Thanks.Two ideas:
Always backup before running any updates, patches, security or OS X update.
Rerun the full combo update 10.5.6.
At worst, do an Archive and Install, or do a fresh install on a newly formatted drive and then let it migrate your old files. Takes about an hour.
It could be something about how you 'downgraded' the drivers over what was present already.
Is there an ATI control panel?
If you look around, there are reports like yours, but I saw way more last Aug/Setp time frame. Either people are living with it, or RMA'd, or gave up, but it was common. Heck, there is an active thread on Mac Pro forum @ MacRumors site.
http://forums.macrumors.com/forumdisplay.php?f=1
I like the 8800, it kicks in on cold boot in the AM and I don't push it, or hear it, but it does have a fan.
I wish there was a graphic driver from ATI/Nvidia, and option to use GPU-Z along with eVGA Precision in OS X. Even Hardware Monitor and iStatPro don't report temp and fan speed and other variables. +(I never used Windows in my life until lately, and I actually have fun playing around and learning more.)+ -
Mac Pro 3.1 and ATI Radeon 3870 running Snow Leopard
Hi.
Anybody who can give me a straight answer here.
I have a Mac Pro3.1 8 Core 2.8Ghz with Radeon 3870 card. (Standard 2600 HD)
Right now it runs 10.5.8 with no problems but i want to update to 10.6.3 Snow.
But someone told me the 3870 card isn't working with Snow Leopard.
Is that right ?Someone? not working? I think they mean that some features won't be supported, like perhaps OpenCL.
Use GT120 cheap and works or shell out for ATI 4870 (or wait and see if anything comes out this year).
http://store.apple.com/us/product/MC002ZM/A
Most of what is written seems like it wasn't a tech writer, but then Apple doesn't get into telling customers what UEFI/EFI64 is the over-riding requirement.
Take Apple hardware specs with grain of salt.
The 4870 works in ALL Mac Pro models (and look at the threads, or the comments on the product page why not). No mystery there either.
http://store.apple.com/us/product/MB999ZM/A
Even the GTX 285 works, if interested.
http://store.apple.com/us/product/TW387ZM/A
And one person has both ATI 4870 + GTX 285, using a couple break out power cables and adapters.
*2009 Mac Pro owner running GTX-285 and ATI 4870 Cards*
(via Aux power Y adapters) And yes, he knows that apple lists 300W Max for the PCIe cards in the manual.
I've got the dual high-power graphics cards running without a hitch. It's rendering with the GTX 285 and CUDA now while I use the computer with the Radeon 4870 (no GUI lag, which is a nice change from using the GTX 285) http://www.xlr8yourmac.com/ -
Mac Edition G5 PCIe ATI Radeon X1900GT 256MB Video Card power cord
I have a G5 2.5 quad, serial number YM5*2EQPS. It has a ATI Radeon 9800 XT on board now. I have two monitors connected.
I want to add a Cintiq graphics tablet, so I need additional video (it is also a monitor). I purchased the Mac Edition G5 PCIe ATI Radeon X1900GT for this purpose.
I can't find a place to plug in the auxiliary power supply. I see several plugs (including a couple centered over the memory slots), but all are filled and none appear to be the six-pin type.
Perhaps I purchased the wrong card for this machine? Or maybe I'm just too stupid to open the back of my computer? Help!
<Edited by Host>HI-
I am confused by your statements saying that you have a G5 Quad (Late 2005, right?) and that you have a Radeon9800 XT installed.
The 9800 XT is an AGP card and won't work in a Quad...
Putting that aside, the Radeon X1900 G5 Edition connects to the G5 logic board at a connector that is centered on the upper edge of the logic board over the memory slots. -
Having trouble with my G4 MDD 867MHz DP and ATi Radeon 9800 Pro video card.
I just recently purchased the ATi Radeon 9800 Pro Mac edition card on ebay. I installed the card on my G4 and turned it on thinking everything would work with no problems, but when I turned it on the grey apple screen came up fine and then it changed to a sky-blue screen with nothing on it and remained on that screen. My desktop or any of my apps did not load up at all. I reset the PRAM and the NVRAM as the seller I bought the card from instructed me to and still I get the same result. Is anyone familiar with this problem? I was wondering if my monitor was the problem because I'm using a Dell LCD monitor as the display for right now? I need help! I'm trying to get this up and running so I can start editing. Whatever information anyone can give me will be greatly appreciated!
Sometimes display cards that support multiple displays (or a second display card in the same Mac) can cause the display you are using to be the SECOND display in a multiple-display "extended desktop".
When this happens, the MenuBar and cursor may be drawn perfectly, but be on the "other" screen, and it is very difficult to determine what has happened. \[This problem is sometimes caused by inadvertently leaving an adapter or cable on an unused display port.]
Try moving the mouse many times to the right to see if the cursor suddenly transitions onto your screen, then try the same experiment to the left. -
I am using a mac pro with a 2.7 GHz processor 8 gigs of ram and a Radeon HD 3870 video card with 512 megs of vram.
I want to upgrade to 1 gig of vram if possible.
Can anyone tell me where I can begin looking, what brand to buy, and what options I have?
I want to be able to use the Element 3D plug in After Effects.
Also, would I need to upgrade my operating system?
Thanks,
FaucheuxShop for them at the Apple Online Store. I would suggest the ATI 5770 or 5870 or one of the new Nvidia GTX models - 650 Ti, 660, or 680.
Note that unless your Mac Pro has PCIe 2.0 slots you should stick with the ATI 5770. -
Arch64 ati radeon 3870 radeonhd driver. Problem with xorg.conf.
I've got a small problem with my xorg. I won't hide that i'm not a xorg nerd and i've used the automatic xorg tool to generate the xorg.conf. After starting X, the screen goes black and then after ~5 seconds montior switches to power-saving mode.
So here we go.
That's xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card1"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
and that's the log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:31:45 2009
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
R700 : Radeon R700.
M98 : Radeon M98 Mobility.
RV730 : Radeon HD4670, HD4650.
M96 : Radeon M96 Mobility.
RV710 : Radeon HD4570, HD4350.
(II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
(II) Primary Device is:
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[8] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[9] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[13] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
[14] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[15] 1 0 0x000003c0 - 0x000003df (0x20) IS[b]
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV670 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from PCI ROM
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0xa000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Calling ASIC Init
(II) RADEONHD(0): ASIC_INIT Successful
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000
(II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(0): Output DVI-I_1/digital using monitor section Monitor0
(II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(0): TMDS A: Sensed Output: DVI
(II) RADEONHD(0): Setting TMDS A to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 1:E-EDID segment register" registered at address 0x60.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for W2253
(II) RADEONHD(0): Manufacturer: GSM Model: 56dc Serial#: 385315
(II) RADEONHD(0): Year: 2009 Week: 5
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 49 vert.: 32
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@56Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x870@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEONHD(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 138.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 148.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
(II) RADEONHD(0): Monitor name: W2253
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff001e6ddc5623e10500
(II) RADEONHD(0): 0513010380312078eaee91a3544c9926
(II) RADEONHD(0): 0f5054a76b80b3008180818f714f0101
(II) RADEONHD(0): 0101010101011a3680a070381f403020
(II) RADEONHD(0): 3500fe221100001e023a801871382d40
(II) RADEONHD(0): 582c4500fe221100001c000000fd0038
(II) RADEONHD(0): 4b1e530f000a202020202020000000fc
(II) RADEONHD(0): 0057323235330a202020202020200081
(II) RADEONHD(0): EDID vendor "GSM", prod id 22236
(II) RADEONHD(0): Using EDID range info for horizontal sync
(II) RADEONHD(0): Using EDID range info for vertical refresh
(II) RADEONHD(0): Printing DDC gathered Modelines:
(II) RADEONHD(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync (66.6 kHz)
(II) RADEONHD(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEONHD(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Output DVI-I_1/digital connected
(II) RADEONHD(0): Output DVI-I_1/analog disconnected
(II) RADEONHD(0): Output TV_7PIN_DIN disconnected
(II) RADEONHD(0): Output DVI-I_2/digital disconnected
(II) RADEONHD(0): Output DVI-I_2/analog disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output DVI-I_1/digital using initial mode 1920x1080
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000)
(**) RADEONHD(0): Display dimensions: (490, 320) mm
(**) RADEONHD(0): DPI set to (99, 152)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(==) RADEONHD(1): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(1): Selected ShadowFB.
(II) RADEONHD(1): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(1): Detected an RV670 on an unidentified card
(II) RADEONHD(1): Mapped IO @ 0xf5000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(1): PCIE Card Detected
(II) RADEONHD(1): Getting BIOS copy from PCI ROM
(II) RADEONHD(1): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0x0000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Calling ASIC Init
(II) RADEONHD(1): ASIC_INIT Successful
(II) RADEONHD(1): Analog TV Default Mode: 27049664
(II) RADEONHD(1): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(1): Using only 262144kB of the total 524288kB.
(--) RADEONHD(1): VideoRAM: 262144 kByte
(II) RADEONHD(1): Framebuffer space used by Firmware (kb): 0
(WW) RADEONHD(1): rhdAtomGetFbBaseAndSize: AtomBIOS specified VRAM scratch space size invalid
(II) RADEONHD(1): default to: 20480
(II) RADEONHD(1): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(1): Detected VGA mode.
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(1): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(1): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(1): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(1): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(1): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(1): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(1): Output DVI-I_1/digital using monitor section Monitor1
(II) RADEONHD(1): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(1): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(1): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): No outputs definitely connected, trying again...
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): Unable to find initial modes
(EE) RADEONHD(1): RandR: No valid modes. Disabling RandR support.
(EE) RADEONHD(1): Failed to detect a connected monitor
(II) RADEONHD(1): Destroying TMDS A
(II) RADEONHD(1): Destroying DAC B
(II) RADEONHD(1): Destroying TMDS B
(II) RADEONHD(1): Destroying DAC A
(II) RADEONHD(1): I2C bus "RHD I2C line 0" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 1" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 2" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 3" removed.
(II) UnloadModule: "radeonhd"
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x7f39b66f6000 (size 0x10000000)
(WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1920x1080" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync
None
(II) RADEONHD(0): RHDAudioSetClock: using TMDS A as clock source with 138500 khz
(II) RADEONHD(0): Using ACR timing N=4096 CTS=138500 for frequency 32000
(II) RADEONHD(0): Using ACR timing N=6272 CTS=153888 for frequency 44100
(II) RADEONHD(0): Using ACR timing N=6144 CTS=138500 for frequency 48000
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(II) RADEONHD(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 510 x 290
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) ImPS/2 Logitech Wheel Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
Last edited by warnab (2009-10-21 18:53:12)i'm getting then such log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 22:35:22 2009
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
Primary device is not PCI
(==) Using default built-in configuration (21 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default vesa Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information. -
AE CS6 doesnt recognize my ATI Radeon HD 6850 video card GPU
As in the title, it keeps me saying GPU is not enabled while OpenGL 4.1 is supported. Any suggestions?
The video driver should be correctly updated, i launched just yesterday a quick AMD app to do that.
I dont get what screenshot you want, i dont have any OpenGL preferences in Video Card settings, but i do have put below the screenshot of AE OpenGL preferences, evenif the first part is in Italian.
By the way the productor's specs formy card are (from the site):
AMD Radeon™ HD 6850 GPU Feature Summary:
775MHz Engine Clock
1GB GDDR5 Memory
1000MHz Memory Clock (GDDR5)
128 Gbps memory bandwidth (maximum)
1.5 TFLOPS compute power
Double slot form factor
TeraScale 2 Unified Processing Architecture
960 Stream Processors
48 Texture Units
128 Z/Stencil ROP Units
32 Color ROP Units
PCI Express® 2.1 x16 bus interface
"Eye-Definition" graphics
DirectX® 11 support
Shader Model 5.0
DirectCompute 11
Programmable hardware tessellation unit
Accelerated multi-threading
HDR texture compression
Order-independent transparency
OpenGL 4.1 support
Image quality enhancement technology
Up to 24x multi-sample and super-sample anti-aliasing modes
Adaptive anti-aliasing
Morphological anti-aliasing (MLAA)
16x angle independent anisotropic texture filtering
128-bit floating point HDR rendering
AMD Eyefinity multi-display technology1
Independent resolutions, refresh rates, color controls, and video overlays
Display groupingCombine multiple displays to behave like a single large display
AMD App Acceleration2
AMD Accelerated Parallel Processing (APP) technology3,4
OpenCL 1.1
DirectCompute 11
Accelerated video encoding, transcoding, and upscaling
UVD 3 dedicated video playback accelerator
MPEG-4 AVC/H.264
VC-1
MPEG-2 (SD & HD)
Multi-View Codec (MVC)
MPEG-4 part 2 (DivX, Xvid)
Adobe Flash
Enhanced Video Quality features
Advanced post-processing and scaling
Dynamic contrast enhancement and color correction
Brighter whites processing (Blue Stretch)
Independent video gamma control
Dynamic video range control
Dual-stream HD (1080p) playback support
DXVA 1.0 & 2.0 support
AMD HD3D technology5
Stereoscopic 3D display/glasses support
Blu-ray 3D support
Stereoscopic 3D gaming
3rd party Stereoscopic 3D middleware software support
AMD CrossFireX™ multi-GPU technology6Dual GPU scaling
Cutting-edge integrated display support
DisplayPort 1.2
Max resolution: 2560x1600 per display
Multi-Stream Transport
21.6 Gbps bandwidth
High bit-rate audio
HDMI® (With 3D, Deep Color and x.v.Color™)Max resolution: 1920x1200
Dual-link DVI with HDCPMax resolution: 2560x1600
VGAMax resolution: 2048x1536
Integrated HD audio controller
Output protected high bit rate 7.1 channel surround sound over HDMI or DisplayPort with no additional cables required
Supports AC-3, AAC, Dolby TrueHD and DTS Master Audio formats
AMD PowerPlay™ power management technology4
Dynamic power management with low power idle state
Ultra-low power state support for multi-GPU configurations
AMD Catalyst™ graphics and HD video configuration software
Unified graphics display driversCertified for Windows 7, Windows Vista, and Windows XP
AMD Catalyst Control Center™Software application and user interface for setup, configuration, and accessing special features of AMD Radeon products -
In the new 3870 card, when and where is the HDMI output used? I thought none of the Apple Displays had HDMI connections. Is some kind of external box needed? Is this primarily for games?
CarlosOf course. Since that is something I would not normally do I not guess that.
Thank you for your reply.
Carlos -
Fix for video tearing ATI Radeon HD 4200 using Catalyst Driver??
Hey guys, as the title asks, is there a fix for pretty serious video tearing that I am experiencing on my ATI Radeon HD 4200 video card? I'm using the proprietary driver (catalyst, built from AUR) and would prefer to use that one or, if need be, radeonhd driver as I need HDMI sound output.
Below is my xorg.conf.
Many many thanks in advance to anyone who may have some ideas/experience with this.
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
# Driver "radeonhd"
BusID "PCI:1:5:0"
Option "Audio" "on"
Option "HDMI" "all"
Option "AccelMethod" "exa" # to enable 2D and Xv acceleration on R6xx/R7xx - default AccelMethod shadowfb
Option "DRI" "on" # to enable 2D and Xv acceleration on R6xx/R7xx - default DRI disabled
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionFIXED - Bad file from ATI Radeon - Use windows/ hp drivers- Cat control center not updated nor used,? thats why I could not see/ control dual monitors. This 4200 series is probaly on its way out.
I had to pay to get it fixed. Do NOT Update using the update from ATI Readeon? It did not work for me.
Hope that might help someone.
Bye
Maybe you are looking for
-
Update ip address, HP LaserJet 500 color MFP M570 PCL 6
Hello, I am having an issue with my HP LaserJet 500 color MFP M570 PCL 6 printer. The error message i am receiving, while trying to scan, says I need to update my ip address. How do i do this?
-
How can I minimise the file size of a greyscale image ?
Hi, What methods are there for making as small as possible the file size of a greyscale image. I need to keep the resolution at 200pixels per inch. The image is going to be big, 5835mm wide and 1780mm tall ! Some of them have some fine soft detail so
-
My brokerage requires Active X in order for Adobe Reader and Java to function. Without Active X neither work. After a lengthy session with their tech staff I was told to contact you or use IE. I hate IE. IE is the whole reason I got FF back when you
-
I am researching how to use LDAP to manage accounts and automounts and wonder whether to use the nis.schema or is there a better way to manage network information services? Clients will be Solaris 9 and 10. Tia - any pointers appreciated
-
Safari crashes as soon as it is opened
Help...Safari crashes as soon as it is opened.... here is the error report...Thanks in advance Date/Time: 2009-02-20 13:49:21.142 -0500 OS Version: 10.4.11 (Build 8S165) Report Version: 4 Command: Safari Path: /Applications/Safari.app/Contents/MacOS/