ATI Radeon 9000 PRO Mac Edition supported under Tiger ?

Hi all,
we are still using OS X 10.3.x for our venerable G4 AGP mac. Back in 2005 when Tiger was the new OS, we were told that our ATI Radeon™ 9000 PRO Mac Edition graphics would not be supported under 10.4.x. Has this changed? I don't want to upgrade to Leopard yet, but would like to use some Tiger features as Mail 2.0 or improved iSync.
Thanks for any input ...
Asbjoern

So is this why all my fonts are screwed on my G4 MDD dual 1.25 using a ATI 9000 Pro?
Seems as tho it works perfectly fine when i had 10.4.10 but when 10.4.11 was released all my fonts are screwed. Even when booting from a OSX CD. I installed 10.5 and still doesnt work.
looks like i need a 9600.

Similar Messages

  • Can I use an ATI Radeon 9000 Pro Mac Edition 128MB Video Card in a Mac Min

    Looking to buy a Mac mini.
    In 2004 I upgraded the graphics card in my dual processor 450 MHz G4 desktop with an ATI Radeon 9000 Pro Mac Edition 128MB Video Card to run a 20-inch Cinema Display.
    Now my G4 has died (probably the power supply and I'm being told it's not worth it to fix---buy a Mac mini!)
    But I've read that the graphics card in the Mac mini is not stellar and I'm wondering if I could reuse the ATI Radeon 9000 Pro Mac Edition 128MB Video Card in the Mac mini. Would this be a good thing to do?
    Any thoughts/advice would be greatly appreciated!
    Cheers,

    There are people that claim to have hooked up a PCI-e 1x card (yes, the Mini uses PCI-e). But that requires some serious hardware modifications including soldering, a PC power supply, and so on. But that card is an old AGP card so even that wouldn't even work for what you've got.

  • Ati radeon 9000 pro mac edition....

    ...just wondering, as this card is now discontinued, what would be the going rate on eBay (or similar) for this card?
    Before I pay to much!!
    TIA

    Most likely in the range of $80-100

  • Ati radeon 9800 pro mac edition power cable install

    radeon 9800 pro mac edition power cable is a 6 pin arrangement on the one I have.  What cable do i need in order to attach it to a late 2005 G5 2.0 dual core power source?

    The Radeon 9800 Pro is an AGP graphics card.
    It CANNOT be used in a Late 2005 PCIe graphics G5.
    IF you have an AGP graphics model of G5, using a Molex splitter is how it is done.

  • ATI Radeon X800 XT or ATI Radeon 9600 Pro Mac Edition for 30" display

    I currently have the ATI Radeon 9600 Pro installed in my G5 2.0 DP and it is running my 30" display, but I am having some isssues when I play DVD's the pictures seems to skip every few seconds like it isn't playing fast enough, or it hesitates. I bought the ATI Radeon X800 XT and wanted to know if that would be a better card before I switch it out.

    The X800 is a faster card but DVD playback doesn't put much load on the card, so the X800 probably won't help. If it skipping on more than one DVD, the DVD drive is probably having problems. Cleaning the lens ay help.

  • ATI Radeon 9000 Pro Mac AGP (driver needed for OS 9.2?)

    Hi guys!
    How's everybody doin?
    I just picked up a used ATI 9000 AGP 128 MB (as an upgrade for my G4 Quicksilver 800 MHZ).
    I'm using 2 HD's (one with OS9), the other (with OSX)
    I think OS 9.2 will do ok without the need for a driver, but I just wanna make sure ...
    Thanx
    Everyone is very helpful around here
    Mike

    Hello again Carl, and Dave
    I know it's been a while since we last talked about this issue. Well apparently, I do have OS freezing problems
    with 9.2 and the ATI 9000 Mac Pro - take a look:
    http://discussions.apple.com/message.jspa?messageID=4289264#4289264
    Wonder if your driver would solve this?
    But can I put your driver in the system while it's still functioning with the older OEM video card back in?
    (that's the only way I can get the system not to freeze)
    Thanks
    Mike

  • Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

    Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
    And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

    The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

  • Aperture and ATI Radeon 9800 Pro Mac Special Edition

    I have noticed a few people on this board have the ATI Radeon 9800 Pro Mac Special Edition (256MB- G5 only) listed on thier specs on the bottom of posts
    so I was wondering what your experience using this card is like with Aperture, even-though it I realize that it is not the current top of the line card ?
    How about a rating from 0 to 5 stars where 5 would be the best currently available.
    Robert
    P.S lets not get into a p**** match over what IS the best video card for Aperture; I am just looking for subjective views on THIS card!

    I have noticed a few people on this board have the
    ATI Radeon 9800 Pro Mac Special Edition (256MB- G5
    only) listed on thier specs on the bottom of posts
    so I was wondering what your experience using this
    card is like with Aperture, even-though it I realize
    that it is not the current top of the line card ?
    How about a rating from 0 to 5 stars where 5 would be
    the best currently available.
    I have just the card you mentioned.
    I think how happy you'd be with it depends on what kinds of files you are using. I work with TIFF files because my camera is not supported, and performance with those is better than with true RAW files.
    I generally do not see much delay but a few adjustmnet tools (Shadows & Highlights & Spot/Patch) can get a bit pokey.
    Honestly if I were upgrading my card all over again I would bit the bullet and get the x800XT, which I am mulling over even now... I was hoping it might drop a bit more in price but it does not seem to be doing so.
    If you want an absolute rating I guess I'd give it three stars, though again that is with the files that I use. For other larger RAW formats like D2H files and such, I think it's more of a two.
    One last thing to note is that I have not tired other raw formats since the update, so it might be upgraded from a two... I was waiting to see what kind of speedup Aperture 1.1 offered in addition to just the system update. I'll report back when that update comes out.

  • ATI Radeon 9000 Pro/ Layer heavy Photoshop project/

    When working on large Photoshop files, whenever I make any move or change, file window goes blank, layers disappear, all that's visible is underlying grid.
    Takes forever to do anything...
    Is this a video card problem? Or is it my monitor? If a vid card problem,
    what is a good replacement for ATI Radeon 9000 Pro?
    ATI Radeon 9000 Pro:
    Chipset Model: ATY,RV250
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 64 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4966
    Revision ID: 0x0001
    ROM Revision: 113-99702-127
    Monitor:
    L1975NW:
    Resolution: 1440 x 900 @ 60 Hz
    Depth: 32-bit Color
    Core Image: Software
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Display Connector:
    Status: No display connected
    Thanks much!

    How clean is your Photoshop scratch disk? The scratch disk is an often overlooked cause of PS slowness. Ideally, your scratch disk should have an amount of contiguous free space equal to at least three times the size of the file you are working on.

  • Final Cut Pro with a ATI Radeon 9000 Pro

    I have an older Power Mac G4 that I have upgraded from 400Mhz to 1.4Ghz and a ATI Radeon 9000 Pro video card. I recently bought Final Cut Pro 2.0 and do not want to upgrade the video card yet again. Does anyone know of any work around to get Final Cut Pro to work on this computer?
    Details are as follows:
    Error message -
    The installed graphics card does not support the OpenGL features recommended by Final Cut Pro.
    ATI Radeon 9000 Pro:
    Chipset Model: ATY,RV250
    Type: Display
    Bus: AGP
    Slot: SLOT-A
    VRAM (Total): 64 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4966
    Revision ID: 0x0001
    ROM Revision: 113-99703-107
    Card # 109-99700-00
    Model ATY,RV250
    Vendor $1002 (4098)
    ROM ATY, Radeon9000i_A
    ROM# 133-99703-107
    FCode Version 1.87
    NDRV 1.1.0f53
    VRAM 64
    Any work around at all would be great. ATI told me to upgrade to 9600 AGP or 9800 AGP. I am not even sure the 9800 AGP will work on this vintage Power Mac.

    It looks like http://www.apple.com/finalcutstudio/specs.html you will be able to run the basic Final Cut Pro program but, obviously, its not going to scream. Many of the individual elements of the suite i.e. Motion, Color, are not going to function as they should without a significant boost in several things, memory, processor speed, video card.
    In all honesty, you should be running FCP 4.5 or 5.0 which will run very well with your hardware. But since you already have FCS2, (I assume that's what you mean, not really Final Cut 2) hang on to it for when you decide to do what all of us eventually will have to do; buy an Intel based box.
    My G5 is fast approaching obsolete, and I'm just waiting for the next version of Final Cut Suite to see how much box I need to go to. Didn't think this time 19 months ago I would be saying that... but time does roll on.
    You'll enjoy FCS2 (FCP6)

  • ATI Radeon 9000 Pro and 1440x900 resolution on G4?

    I am looking to purchase a new widescreen monitor (Viewsonic VA1912WB) which supports a native resolution on 1440x900. I am trying to determine if the ATI Radeon 9000 Pro card will properly support this resolution. Anyone have a clue, or tried it yourselves? Thanks!

    I had found that page and had drawn the same "hopeful" conclusion that you are suggesting. I also looked in my displays preference pane and noticed quite a few options that aren't on the ATI site as "supported displays," which leads me to believe it's possible.
    I've checked out some other boards (pc based) and they are able to make it work but it involves modifying all sorts of driver files. Stupid PC's!
    Anyone else out there have the ATI card and the ability to test that resolution?

  • What is the correct installation sequence for my ATI Radeon 9800 PRO MAC AGP 128MB into my Quicksilver 867 G4?

    Hi.
    I just got my used ATI Radeon 9800 PRO MAC AGP 128MB card.
    What is the correct installation sequence into my Quicksilver 867 G4 running 10.4.11 on one drive 10.5 on another?
    The original NVIDIA GeForce2 MX - 32MB SDRAM went bust.
    Is the driver build in 10.4?
    Do I remove the old driver?
    If I need to install the driver that came with it, (10.3.6) should the card be installed first?
    What about firmware updates?
    Thank you for all your time and patience.
                                                                                        W.W.

    I think it's the card, but here are some files that may affect it...
    /Users/YourUserName/Library/Preferences/ByHost /com.apple.preference.displays.<12digitHex#>.plist
    /Library/Preferences/com.apple.windowserver.plist
    /Users/YourUserName/Library/Preferences/ByHost/com.apple.windowserver.<12digitHe x#>.plist
    /Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist

  • 645 Ultra-C and ATI Radeon 9000 Pro

    Hi there --
    I have a 645 Ultra-C with P4 1.7mhz attached to it. It has 640mb of RAM, Audigy 2, and brand new ATI Radeon 9000 pro. It's running WindowsXP
    The issue is that upon installing the ATI card into the machine WindowsXP is freezing and then recovering with an error message about a device failure. In checking the system log I see an error message about the ATI driver being stuck in a loop.
    I am using the driver I downloaded from the ATI web site along with the ATI control panel software also downloaded from the ATI site. The drivers are the latest.
    I am able to regain stability by disabling hardware acceleration in Display Properties. This is less then ideal.
    I'm using version 7.2.0.1130 of the AGP driver. I'm not sure which BIOS rev, it would be the one the motherboard shipped with. However I'm unable to flash the BIOS really since I do not have access to a 98/ME box. As I understand it I can only flash the BIOS from a 98/Me startup floppy on a non-FAT machine. LiveUpdate gives me an error message about the service not being started and that LiveUpdate only works with MSI graphics cards.
    In the BIOS I’ve switched the primary video card from PCI to AGP. I’ve even downgrade from AGP 4x to APG 2x using the AGP utility.
    Any ideas?

    flashed up to 1.90 via LiveUpdate2, after pulling ATI card and running on tnt2 card, and now I'm cranking

  • ATI Radeon 9000 Pro video card is conflicting with additional memory

    I have a ATI Radeon 9000 Pro video card. I have a 645E Max motherboard (MS-6547). I recently purchased a 512MB dimm of Kingston PC2700 Cas 2.5 memory (KVR333X64C25/512) to go with the the 256MB dimm of the same model # above. I installed the memory and my screen stays blank. When I remove the new dimm it runs fine. I did get the memory and the motherboard tested at the store where I got the motherboard and they work fine. I came to the conclusion it was my video card when I removed all my components except the memory and the video card, and turned on the machine,nothing. I did try swiching dimm location and changing any bios settings I thought would make it work. I tried updating the video card drivers and motherboard AGP drivers. If anybody had this problem in the past could you tell me how you got it to work.

    I took the board and the 2 dimms to the store where I bought them.  They hooked up both dimms and a video card to the board.  When it was powered up, both dimms were recognized.  After I got home I proceded to determine if another component it conflicting with the memory.  I started with both dimms and my video card the Radeon.  I powered up with no other hardware connected and the screen remains blank.  I remove the 512MB dimm and leave the 256MB dimm in, and powered up and pc booted up normally.

  • Difference between Radeon 9650 and Radeon 9800 Pro Mac Edition?

    I was considering upgrading to a 9800 Pro Mac edition to replace my Radeon 9650. Would there be much of a performance improvement?
    Should I go for the X800XT?
    Thanks
    Andrew

    Hi Curnsie,
    Realize this thread is "answered" already, but, actually, there is a good bit of difference between the 9650 and the 9800. Have a look here:
    http://www.barefeats.com/rad9650.html
    Cheers.

Maybe you are looking for