ATI Radeon 9000 with a K7T Turbo2

I have a K7T Turbo2 running AMD XP 2100+.
I had a Asus GeForce4 MX 440 with 8xAGP 64MB. Then swapped it out for a MS ATI Radeon 9000 Pro 128MB. I installed it, after the installation, it rebooted, then after the Windows XP Home Edition screen, it blacks out. ;( Can anybody tell me why? I tried even the ATI driver too, and same thing. My board handles the max of 4xAGP. Could that be it? Either driver I use, I get the same result. Can someone help me? ) Thanks.

can you access XP in safe mode? It could be the refresh rate set itself too high. Try going into the display control panel and setting it back to the minimum settings at 60hz, reboot, and it should be fine if that is the problem.

Similar Messages

Final Cut Pro with a ATI Radeon 9000 Pro

I have an older Power Mac G4 that I have upgraded from 400Mhz to 1.4Ghz and a ATI Radeon 9000 Pro video card. I recently bought Final Cut Pro 2.0 and do not want to upgrade the video card yet again. Does anyone know of any work around to get Final Cut Pro to work on this computer?
Details are as follows:
Error message -
The installed graphics card does not support the OpenGL features recommended by Final Cut Pro.
ATI Radeon 9000 Pro:
Chipset Model: ATY,RV250
Type: Display
Bus: AGP
Slot: SLOT-A
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4966
Revision ID: 0x0001
ROM Revision: 113-99703-107
Card # 109-99700-00
Model ATY,RV250
Vendor $1002 (4098)
ROM ATY, Radeon9000i_A
ROM# 133-99703-107
FCode Version 1.87
NDRV 1.1.0f53
VRAM 64
Any work around at all would be great. ATI told me to upgrade to 9600 AGP or 9800 AGP. I am not even sure the 9800 AGP will work on this vintage Power Mac.

It looks like http://www.apple.com/finalcutstudio/specs.html you will be able to run the basic Final Cut Pro program but, obviously, its not going to scream. Many of the individual elements of the suite i.e. Motion, Color, are not going to function as they should without a significant boost in several things, memory, processor speed, video card.
In all honesty, you should be running FCP 4.5 or 5.0 which will run very well with your hardware. But since you already have FCS2, (I assume that's what you mean, not really Final Cut 2) hang on to it for when you decide to do what all of us eventually will have to do; buy an Intel based box.
My G5 is fast approaching obsolete, and I'm just waiting for the next version of Final Cut Suite to see how much box I need to go to. Didn't think this time 19 months ago I would be saying that... but time does roll on.
You'll enjoy FCS2 (FCP6)

ATI Radeon 9000 Pro video card is conflicting with additional memory

I have a ATI Radeon 9000 Pro video card. I have a 645E Max motherboard (MS-6547). I recently purchased a 512MB dimm of Kingston PC2700 Cas 2.5 memory (KVR333X64C25/512) to go with the the 256MB dimm of the same model # above. I installed the memory and my screen stays blank. When I remove the new dimm it runs fine. I did get the memory and the motherboard tested at the store where I got the motherboard and they work fine. I came to the conclusion it was my video card when I removed all my components except the memory and the video card, and turned on the machine,nothing. I did try swiching dimm location and changing any bios settings I thought would make it work. I tried updating the video card drivers and motherboard AGP drivers. If anybody had this problem in the past could you tell me how you got it to work.

I took the board and the 2 dimms to the store where I bought them. They hooked up both dimms and a video card to the board. When it was powered up, both dimms were recognized. After I got home I proceded to determine if another component it conflicting with the memory. I started with both dimms and my video card the Radeon. I powered up with no other hardware connected and the screen remains blank. I remove the 512MB dimm and leave the 256MB dimm in, and powered up and pc booted up normally.

Blue screen and restart / ThinkPad T40 2373-94G Windows 7 and 32MB ATI Radeon 9000

Hello !
I'm having a lot of trouble with video driver for windows 7 for ati radeon 9000.
There is no driver for windows 7 and I tryed with driver for winXP, ... etc and didnt find any solution .
Actually driver for windows xp actually works on windows 7, but as soon as I tried to open any application or game I got blue screen with error and computer reboots...
Thank you for any information or solution !
My computer is :
Product: ThinkPad T40 2373-94G [change]
Operating system: Windows 7 [change]
Original description: P M 1.6GHz, 512MB RAM, 80GB 4200rpm HDD, 14.1 SXGA+(1400x1050) TFT LCD, 32MB ATI Radeon 9000, 16x10x24x/8x CD-RW/DVD(slim), Bluetooth/Modem, 1Gb Ether, Intel 802.11b , Sec Chip, UltraNav, 9 cell Batt, WinXP Pro

Welcome to the forum!
As I'm sure you know by know, your GPU is not supported in W7.
That being said, take a look at this thread:
http://forum.thinkpads.com/viewtopic.php?f=57&t=77964
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

ATI Radeon 9000 IGP Mobile driver doesn't have hardware acceleration

I installed the xf86-video-ati package and I don't get hardware acceleration. Glxgears gives a painful 80 FPS rate and nothing 3D intensive works, neither 480p/720p youtube videos. Also, it seems that the current drivers identify the card as 9100 instead of 9000, but I know that it's 9000 for sure. The laptop that I'm running is an old one, Compaq Presario R3000 with the Intel CPU.
X.org.0.log
[ 25.819]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 25.819] X Protocol Version 11, Revision 0
[ 25.819] Build Operating System: Linux 2.6.38-ARCH i686
[ 25.819] Current Operating System: Linux localhost 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011 i686
[ 25.820] Kernel command line: root=/dev/sda1 ro
[ 25.820] Build Date: 16 April 2011 12:05:35PM
[ 25.820]
[ 25.841] Current version of pixman: 0.20.2
[ 25.841] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.841] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.841] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 20 00:29:04 2011
[ 25.913] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 25.948] (==) No Layout section. Using the first Screen section.
[ 25.948] (==) No screen section available. Using defaults.
[ 25.948] (**) |-->Screen "Default Screen Section" (0)
[ 25.948] (**) | |-->Monitor "<default monitor>"
[ 25.949] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.949] (==) Automatically adding devices
[ 25.949] (==) Automatically enabling devices
[ 25.998] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 25.998] Entry deleted from font path.
[ 26.073] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 26.073] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.073] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.073] (II) Loader magic: 0x81f4ee0
[ 26.073] (II) Module ABI versions:
[ 26.073] X.Org ANSI C Emulation: 0.4
[ 26.073] X.Org Video Driver: 10.0
[ 26.073] X.Org XInput driver : 12.2
[ 26.073] X.Org Server Extension : 5.0
[ 26.074] (--) PCI:*(0:1:5:0) 1002:5835:103c:006b rev 0, Mem @ 0xe0000000/268435456, 0xd0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 26.075] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 26.075] (II) LoadModule: "extmod"
[ 26.079] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 26.094] (II) Module extmod: vendor="X.Org Foundation"
[ 26.095] compiled for 1.10.1, module version = 1.0.0
[ 26.095] Module class: X.Org Server Extension
[ 26.095] ABI class: X.Org Server Extension, version 5.0
[ 26.095] (II) Loading extension MIT-SCREEN-SAVER
[ 26.095] (II) Loading extension XFree86-VidModeExtension
[ 26.095] (II) Loading extension XFree86-DGA
[ 26.095] (II) Loading extension DPMS
[ 26.095] (II) Loading extension XVideo
[ 26.095] (II) Loading extension XVideo-MotionCompensation
[ 26.095] (II) Loading extension X-Resource
[ 26.095] (II) LoadModule: "dbe"
[ 26.095] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 26.097] (II) Module dbe: vendor="X.Org Foundation"
[ 26.097] compiled for 1.10.1, module version = 1.0.0
[ 26.097] Module class: X.Org Server Extension
[ 26.097] ABI class: X.Org Server Extension, version 5.0
[ 26.097] (II) Loading extension DOUBLE-BUFFER
[ 26.097] (II) LoadModule: "glx"
[ 26.097] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.111] (II) Module glx: vendor="X.Org Foundation"
[ 26.111] compiled for 1.10.1, module version = 1.0.0
[ 26.111] ABI class: X.Org Server Extension, version 5.0
[ 26.116] (==) AIGLX enabled
[ 26.116] (II) Loading extension GLX
[ 26.116] (II) LoadModule: "record"
[ 26.116] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 26.117] (II) Module record: vendor="X.Org Foundation"
[ 26.117] compiled for 1.10.1, module version = 1.13.0
[ 26.117] Module class: X.Org Server Extension
[ 26.117] ABI class: X.Org Server Extension, version 5.0
[ 26.117] (II) Loading extension RECORD
[ 26.117] (II) LoadModule: "dri"
[ 26.117] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 26.147] (II) Module dri: vendor="X.Org Foundation"
[ 26.147] compiled for 1.10.1, module version = 1.0.0
[ 26.147] ABI class: X.Org Server Extension, version 5.0
[ 26.147] (II) Loading extension XFree86-DRI
[ 26.147] (II) LoadModule: "dri2"
[ 26.147] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 26.148] (II) Module dri2: vendor="X.Org Foundation"
[ 26.148] compiled for 1.10.1, module version = 1.2.0
[ 26.148] ABI class: X.Org Server Extension, version 5.0
[ 26.148] (II) Loading extension DRI2
[ 26.148] (==) Matched ati as autoconfigured driver 0
[ 26.148] (==) Matched vesa as autoconfigured driver 1
[ 26.148] (==) Matched fbdev as autoconfigured driver 2
[ 26.148] (==) Assigned the driver to the xf86ConfigLayout
[ 26.148] (II) LoadModule: "ati"
[ 26.149] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 26.165] (II) Module ati: vendor="X.Org Foundation"
[ 26.165] compiled for 1.10.1, module version = 6.14.99
[ 26.165] Module class: X.Org Video Driver
[ 26.165] ABI class: X.Org Video Driver, version 10.0
[ 26.165] (II) LoadModule: "radeon"
[ 26.166] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 26.235] (II) Module radeon: vendor="X.Org Foundation"
[ 26.235] compiled for 1.10.1, module version = 6.14.99
[ 26.235] Module class: X.Org Video Driver
[ 26.235] ABI class: X.Org Video Driver, version 10.0
[ 26.236] (II) LoadModule: "vesa"
[ 26.237] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 26.250] (II) Module vesa: vendor="X.Org Foundation"
[ 26.250] compiled for 1.10.0, module version = 2.3.0
[ 26.250] Module class: X.Org Video Driver
[ 26.250] ABI class: X.Org Video Driver, version 10.0
[ 26.250] (II) LoadModule: "fbdev"
[ 26.250] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 26.269] (II) Module fbdev: vendor="X.Org Foundation"
[ 26.269] compiled for 1.10.0, module version = 0.4.2
[ 26.269] ABI class: X.Org Video Driver, version 10.0
[ 26.269] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS
[ 26.278] (II) VESA: driver for VESA chipsets: vesa
[ 26.278] (II) FBDEV: driver for framebuffer: fbdev
[ 26.278] (++) using VT number 7
[ 26.303] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 26.303] (II) [KMS] Kernel modesetting enabled.
[ 26.303] (WW) Falling back to old probe method for vesa
[ 26.303] (WW) Falling back to old probe method for fbdev
[ 26.303] (II) Loading sub module "fbdevhw"
[ 26.303] (II) LoadModule: "fbdevhw"
[ 26.303] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 26.304] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 26.304] compiled for 1.10.1, module version = 0.0.2
[ 26.304] ABI class: X.Org Video Driver, version 10.0
[ 26.304] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 26.304] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 26.304] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 26.304] (==) RADEON(0): Default visual is TrueColor
[ 26.304] (==) RADEON(0): RGB weight 888
[ 26.304] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 26.304] (--) RADEON(0): Chipset: "ATI Radeon Mobility 9100 IGP (U3) 5835" (ChipID = 0x5835)
[ 26.304] (II) RADEON(0): AGP card detected
[ 26.304] drmOpenDevice: node name is /dev/dri/card0
[ 26.305] drmOpenDevice: open result is 8, (OK)
[ 26.305] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 26.305] drmOpenDevice: node name is /dev/dri/card0
[ 26.305] drmOpenDevice: open result is 8, (OK)
[ 26.305] drmOpenByBusid: drmOpenMinor returns 8
[ 26.305] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 26.305] (II) Loading sub module "exa"
[ 26.305] (II) LoadModule: "exa"
[ 26.305] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 26.306] (II) Module exa: vendor="X.Org Foundation"
[ 26.306] compiled for 1.10.1, module version = 2.5.0
[ 26.307] ABI class: X.Org Video Driver, version 10.0
[ 26.307] (II) RADEON(0): KMS Color Tiling: disabled
[ 26.307] (II) RADEON(0): KMS Pageflipping: enabled
[ 26.307] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 26.338] (II) RADEON(0): Output VGA-0 has no monitor section
[ 26.338] (II) RADEON(0): Output LVDS has no monitor section
[ 26.344] (II) RADEON(0): Output S-video has no monitor section
[ 26.368] (II) RADEON(0): EDID for output VGA-0
[ 26.369] (II) RADEON(0): EDID for output LVDS
[ 26.369] (II) RADEON(0): Printing probed modes for output LVDS
[ 26.369] (II) RADEON(0): Modeline "1280x800"x60.0 68.90 1280 1296 1328 1408 800 804 808 816 (48.9 kHz)
[ 26.369] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 26.369] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 26.369] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 26.369] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 26.369] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 26.369] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 26.369] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 26.375] (II) RADEON(0): EDID for output S-video
[ 26.375] (II) RADEON(0): Output VGA-0 disconnected
[ 26.375] (II) RADEON(0): Output LVDS connected
[ 26.375] (II) RADEON(0): Output S-video disconnected
[ 26.375] (II) RADEON(0): Using exact sizes for initial modes
[ 26.375] (II) RADEON(0): Output LVDS using initial mode 1280x800
[ 26.375] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.375] (II) RADEON(0): mem size init: gart size :1dff000 vram size: s:8000000 visible:7bd8000
[ 26.375] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 26.375] (==) RADEON(0): DPI set to (96, 96)
[ 26.375] (II) Loading sub module "fb"
[ 26.375] (II) LoadModule: "fb"
[ 26.375] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.419] (II) Module fb: vendor="X.Org Foundation"
[ 26.419] compiled for 1.10.1, module version = 1.0.0
[ 26.419] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.419] (II) Loading sub module "ramdac"
[ 26.419] (II) LoadModule: "ramdac"
[ 26.419] (II) Module "ramdac" already built-in
[ 26.419] (II) UnloadModule: "vesa"
[ 26.419] (II) Unloading vesa
[ 26.419] (II) UnloadModule: "fbdev"
[ 26.419] (II) Unloading fbdev
[ 26.419] (II) UnloadModule: "fbdevhw"
[ 26.419] (II) Unloading fbdevhw
[ 26.419] (--) Depth 24 pixmap format is 32 bpp
[ 26.420] (II) RADEON(0): [DRI2] Setup complete
[ 26.420] (II) RADEON(0): [DRI2] DRI driver: r200
[ 26.420] (II) RADEON(0): Front buffer size: 4000K
[ 26.420] (II) RADEON(0): VRAM usage limit set to 110534K
[ 26.451] (==) RADEON(0): Backing store disabled
[ 26.451] (II) RADEON(0): Direct rendering enabled
[ 26.470] (II) RADEON(0): Render acceleration enabled for R200 type cards.
[ 26.470] (II) RADEON(0): Setting EXA maxPitchBytes
[ 26.470] (II) EXA(0): Driver allocated offscreen pixmaps
[ 26.470] (II) EXA(0): Driver registered support for the following operations:
[ 26.470] (II) Solid
[ 26.470] (II) Copy
[ 26.470] (II) Composite (RENDER acceleration)
[ 26.470] (II) UploadToScreen
[ 26.470] (II) DownloadFromScreen
[ 26.471] (II) RADEON(0): Acceleration enabled
[ 26.471] (==) RADEON(0): DPMS enabled
[ 26.471] (==) RADEON(0): Silken mouse enabled
[ 26.490] (II) RADEON(0): Set up textured video
[ 26.490] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.490] (--) RandR disabled
[ 26.490] (II) Initializing built-in extension Generic Event Extension
[ 26.490] (II) Initializing built-in extension SHAPE
[ 26.490] (II) Initializing built-in extension MIT-SHM
[ 26.490] (II) Initializing built-in extension XInputExtension
[ 26.490] (II) Initializing built-in extension XTEST
[ 26.490] (II) Initializing built-in extension BIG-REQUESTS
[ 26.490] (II) Initializing built-in extension SYNC
[ 26.490] (II) Initializing built-in extension XKEYBOARD
[ 26.490] (II) Initializing built-in extension XC-MISC
[ 26.490] (II) Initializing built-in extension SECURITY
[ 26.490] (II) Initializing built-in extension XINERAMA
[ 26.490] (II) Initializing built-in extension XFIXES
[ 26.490] (II) Initializing built-in extension RENDER
[ 26.490] (II) Initializing built-in extension RANDR
[ 26.490] (II) Initializing built-in extension COMPOSITE
[ 26.490] (II) Initializing built-in extension DAMAGE
[ 26.598] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 26.598] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 26.598] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 26.598] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 26.598] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 26.599] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r200_dri.so
[ 26.599] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 26.600] (II) RADEON(0): Setting screen physical size to 338 x 211
[ 27.171] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 27.171] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.171] (II) LoadModule: "evdev"
[ 27.199] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.216] (II) Module evdev: vendor="X.Org Foundation"
[ 27.216] compiled for 1.10.0, module version = 2.6.0
[ 27.216] Module class: X.Org XInput Driver
[ 27.216] ABI class: X.Org XInput driver, version 12.2
[ 27.216] (II) Using input driver 'evdev' for 'Power Button'
[ 27.216] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.217] (**) Power Button: always reports core events
[ 27.217] (**) Power Button: Device: "/dev/input/event5"
[ 27.240] (--) Power Button: Found keys
[ 27.240] (II) Power Button: Configuring as keyboard
[ 27.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 27.240] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 27.240] (**) Option "xkb_rules" "evdev"
[ 27.240] (**) Option "xkb_model" "evdev"
[ 27.240] (**) Option "xkb_layout" "us"
[ 27.274] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 27.274] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.274] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.274] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.275] (**) Video Bus: always reports core events
[ 27.275] (**) Video Bus: Device: "/dev/input/event2"
[ 27.286] (--) Video Bus: Found keys
[ 27.286] (II) Video Bus: Configuring as keyboard
[ 27.286] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3/event2"
[ 27.286] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 27.286] (**) Option "xkb_rules" "evdev"
[ 27.286] (**) Option "xkb_model" "evdev"
[ 27.286] (**) Option "xkb_layout" "us"
[ 27.397] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 27.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.397] (II) Using input driver 'evdev' for 'Power Button'
[ 27.398] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.398] (**) Power Button: always reports core events
[ 27.398] (**) Power Button: Device: "/dev/input/event4"
[ 27.413] (--) Power Button: Found keys
[ 27.413] (II) Power Button: Configuring as keyboard
[ 27.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event4"
[ 27.413] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 27.413] (**) Option "xkb_rules" "evdev"
[ 27.413] (**) Option "xkb_model" "evdev"
[ 27.413] (**) Option "xkb_layout" "us"
[ 27.414] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 27.414] (II) No input driver/identifier specified (ignoring)
[ 27.423] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event7)
[ 27.423] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 27.423] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 27.423] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.423] (**) USB OPTICAL MOUSE: always reports core events
[ 27.423] (**) USB OPTICAL MOUSE: Device: "/dev/input/event7"
[ 27.440] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 27.440] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 27.440] (--) USB OPTICAL MOUSE: Found relative axes
[ 27.440] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 27.440] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 27.440] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 27.440] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 27.440] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.440] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.4/0000:02:07.0/usb4/4-1/4-1:1.0/input/input8/event7"
[ 27.440] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE)
[ 27.440] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 27.440] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 27.440] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 27.440] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 27.440] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 27.441] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse1)
[ 27.441] (II) No input driver/identifier specified (ignoring)
[ 27.444] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 27.444] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.444] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27.444] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.444] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.444] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 27.460] (--) AT Translated Set 2 keyboard: Found keys
[ 27.460] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 27.460] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event0"
[ 27.460] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 27.460] (**) Option "xkb_rules" "evdev"
[ 27.460] (**) Option "xkb_model" "evdev"
[ 27.460] (**) Option "xkb_layout" "us"
[ 27.461] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6)
[ 27.461] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 27.461] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 27.461] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.461] (**) PS/2 Generic Mouse: always reports core events
[ 27.461] (**) PS/2 Generic Mouse: Device: "/dev/input/event6"
[ 27.486] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 27.486] (--) PS/2 Generic Mouse: Found relative axes
[ 27.486] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 27.486] (II) PS/2 Generic Mouse: Configuring as mouse
[ 27.486] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 27.486] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.486] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event6"
[ 27.486] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[ 27.486] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 27.487] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 27.487] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 27.487] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 27.487] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 27.487] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 27.487] (II) No input driver/identifier specified (ignoring)
[ 27.488] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 27.488] (II) No input driver/identifier specified (ignoring)
kernel.log
Apr 20 00:27:00 localhost kernel: [Hardware Error]: Machine check events logged
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys cpuset
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys cpu
Apr 20 00:28:52 localhost kernel: Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011
Apr 20 00:28:52 localhost kernel: BIOS-provided physical RAM map:
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000000100000 - 0000000017f70000 (usable)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000017f70000 - 0000000017f7d000 (ACPI data)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000017f7d000 - 0000000017f80000 (ACPI NVS)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000017f80000 - 0000000018000000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000027f80000 - 0000000028000000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Apr 20 00:28:52 localhost kernel: Notice: NX (Execute Disable) protection missing in CPU!
Apr 20 00:28:52 localhost kernel: DMI present.
Apr 20 00:28:52 localhost kernel: DMI: Hewlett-Packard Presario R3000 (PC777AV) /089C, BIOS F.45 04/06/2005
Apr 20 00:28:52 localhost kernel: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Apr 20 00:28:52 localhost kernel: e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Apr 20 00:28:52 localhost kernel: last_pfn = 0x17f70 max_arch_pfn = 0x100000
Apr 20 00:28:52 localhost kernel: MTRR default type: uncachable
Apr 20 00:28:52 localhost kernel: MTRR fixed ranges enabled:
Apr 20 00:28:52 localhost kernel: 00000-9FFFF write-back
Apr 20 00:28:52 localhost kernel: A0000-BFFFF uncachable
Apr 20 00:28:52 localhost kernel: C0000-CFFFF write-protect
Apr 20 00:28:52 localhost kernel: D0000-DFFFF uncachable
Apr 20 00:28:52 localhost kernel: E0000-FFFFF write-protect
Apr 20 00:28:52 localhost kernel: MTRR variable ranges enabled:
Apr 20 00:28:52 localhost kernel: 0 base 000000000 mask FF0000000 write-back
Apr 20 00:28:52 localhost kernel: 1 base 010000000 mask FF8000000 write-back
Apr 20 00:28:52 localhost kernel: 2 base 017F80000 mask FFFF80000 uncachable
Apr 20 00:28:52 localhost kernel: 3 base 027F80000 mask FFFF80000 uncachable
Apr 20 00:28:52 localhost kernel: 4 disabled
Apr 20 00:28:52 localhost kernel: 5 disabled
Apr 20 00:28:52 localhost kernel: 6 disabled
Apr 20 00:28:52 localhost kernel: 7 disabled
Apr 20 00:28:52 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Apr 20 00:28:52 localhost kernel: found SMP MP-table at [c00f6470] f6470
Apr 20 00:28:52 localhost kernel: initial memory mapped : 0 - 01800000
Apr 20 00:28:52 localhost kernel: init_memory_mapping: 0000000000000000-0000000017f70000
Apr 20 00:28:52 localhost kernel: 0000000000 - 0000400000 page 4k
Apr 20 00:28:52 localhost kernel: 0000400000 - 0017c00000 page 2M
Apr 20 00:28:52 localhost kernel: 0017c00000 - 0017f70000 page 4k
Apr 20 00:28:52 localhost kernel: kernel direct mapping tables up to 17f70000 @ 17fb000-1800000
Apr 20 00:28:52 localhost kernel: RAMDISK: 17dca000 - 17f60000
Apr 20 00:28:52 localhost kernel: ACPI: RSDP 000f6500 00014 (v00 PTLTD )
Apr 20 00:28:52 localhost kernel: ACPI: RSDT 17f79185 00030 (v01 PTLTD RSDT 06040000 LTP 00000000)
Apr 20 00:28:52 localhost kernel: ACPI: FACP 17f7ceed 00074 (v01 HP Chinook 06040000 ATI 000F4240)
Apr 20 00:28:52 localhost kernel: ACPI: DSDT 17f791b5 03D38 (v01 HP SB200 06040000 INTL 20030509)
Apr 20 00:28:52 localhost kernel: ACPI: FACS 17f7ffc0 00040
Apr 20 00:28:52 localhost kernel: ACPI: APIC 17f7cf61 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
Apr 20 00:28:52 localhost kernel: ACPI: SSDT 17f7cfc9 00037 (v01 PTLTD ACPIHT 06040000 LTP 00000001)
Apr 20 00:28:52 localhost kernel: ACPI: Local APIC address 0xfee00000
Apr 20 00:28:52 localhost kernel: 0MB HIGHMEM available.
Apr 20 00:28:52 localhost kernel: 383MB LOWMEM available.
Apr 20 00:28:52 localhost kernel: mapped low ram: 0 - 17f70000
Apr 20 00:28:52 localhost kernel: low ram: 0 - 17f70000
Apr 20 00:28:52 localhost kernel: Zone PFN ranges:
Apr 20 00:28:52 localhost kernel: DMA 0x00000010 -> 0x00001000
Apr 20 00:28:52 localhost kernel: Normal 0x00001000 -> 0x00017f70
Apr 20 00:28:52 localhost kernel: HighMem empty
Apr 20 00:28:52 localhost kernel: Movable zone start PFN for each node
Apr 20 00:28:52 localhost kernel: early_node_map[2] active PFN ranges
Apr 20 00:28:52 localhost kernel: 0: 0x00000010 -> 0x0000009f
Apr 20 00:28:52 localhost kernel: 0: 0x00000100 -> 0x00017f70
Apr 20 00:28:52 localhost kernel: On node 0 totalpages: 98047
Apr 20 00:28:52 localhost kernel: free_area_init_node: node 0, pgdat c1450b00, node_mem_map d7aca200
Apr 20 00:28:52 localhost kernel: DMA zone: 32 pages used for memmap
Apr 20 00:28:52 localhost kernel: DMA zone: 0 pages reserved
Apr 20 00:28:52 localhost kernel: DMA zone: 3951 pages, LIFO batch:0
Apr 20 00:28:52 localhost kernel: Normal zone: 735 pages used for memmap
Apr 20 00:28:52 localhost kernel: Normal zone: 93329 pages, LIFO batch:31
Apr 20 00:28:52 localhost kernel: Using APIC driver default
Apr 20 00:28:52 localhost kernel: ACPI: PM-Timer IO Port: 0x8008
Apr 20 00:28:52 localhost kernel: ACPI: Local APIC address 0xfee00000
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Apr 20 00:28:52 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Apr 20 00:28:52 localhost kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Apr 20 00:28:52 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Apr 20 00:28:52 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Apr 20 00:28:52 localhost kernel: ACPI: IRQ0 used by override.
Apr 20 00:28:52 localhost kernel: ACPI: IRQ2 used by override.
Apr 20 00:28:52 localhost kernel: ACPI: IRQ9 used by override.
Apr 20 00:28:52 localhost kernel: Using ACPI (MADT) for SMP configuration information
Apr 20 00:28:52 localhost kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
Apr 20 00:28:52 localhost kernel: nr_irqs_gsi: 40
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Apr 20 00:28:52 localhost kernel: Allocating PCI resources starting at 28000000 (gap: 28000000:d6c00000)
Apr 20 00:28:52 localhost kernel: Booting paravirtualized kernel on bare hardware
Apr 20 00:28:52 localhost kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Apr 20 00:28:52 localhost kernel: PERCPU: Embedded 12 pages/cpu @d7400000 s27392 r0 d21760 u2097152
Apr 20 00:28:52 localhost kernel: pcpu-alloc: s27392 r0 d21760 u2097152 alloc=1*4194304
Apr 20 00:28:52 localhost kernel: pcpu-alloc: [0] 0 1
Apr 20 00:28:52 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97280
Apr 20 00:28:52 localhost kernel: Kernel command line: root=/dev/sda1 ro
Apr 20 00:28:52 localhost kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
Apr 20 00:28:52 localhost kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 20 00:28:52 localhost kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr 20 00:28:52 localhost kernel: Initializing CPU#0
Apr 20 00:28:52 localhost kernel: allocated 1962880 bytes of page_cgroup
Apr 20 00:28:52 localhost kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Apr 20 00:28:52 localhost kernel: Initializing HighMem for node 0 (00000000:00000000)
Apr 20 00:28:52 localhost kernel: Memory: 379216k/392640k available (3182k kernel code, 12972k reserved, 1260k data, 424k init, 0k highmem)
Apr 20 00:28:52 localhost kernel: virtual kernel memory layout:
Apr 20 00:28:52 localhost kernel: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
Apr 20 00:28:52 localhost kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Apr 20 00:28:52 localhost kernel: vmalloc : 0xd8770000 - 0xff7fe000 ( 624 MB)
Apr 20 00:28:52 localhost kernel: lowmem : 0xc0000000 - 0xd7f70000 ( 383 MB)
Apr 20 00:28:52 localhost kernel: .init : 0xc1457000 - 0xc14c1000 ( 424 kB)
Apr 20 00:28:52 localhost kernel: .data : 0xc131b86b - 0xc1456a00 (1260 kB)
Apr 20 00:28:52 localhost kernel: .text : 0xc1000000 - 0xc131b86b (3182 kB)
Apr 20 00:28:52 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Apr 20 00:28:52 localhost kernel: SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Apr 20 00:28:52 localhost kernel: Preemptable hierarchical RCU implementation.
Apr 20 00:28:52 localhost kernel: RCU-based detection of stalled CPUs is disabled.
Apr 20 00:28:52 localhost kernel: Verbose stalled-CPUs detection is disabled.
Apr 20 00:28:52 localhost kernel: NR_IRQS:512
Apr 20 00:28:52 localhost kernel: CPU 0 irqstacks, hard=d700c000 soft=d700e000
Apr 20 00:28:52 localhost kernel: Console: colour VGA+ 80x25
Apr 20 00:28:52 localhost kernel: console [tty0] enabled
Apr 20 00:28:52 localhost kernel: Fast TSC calibration using PIT
Apr 20 00:28:52 localhost kernel: Detected 2999.891 MHz processor.
Apr 20 00:28:52 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.77 BogoMIPS (lpj=9999636)
Apr 20 00:28:52 localhost kernel: pid_max: default: 32768 minimum: 301
Apr 20 00:28:52 localhost kernel: Security Framework initialized
Apr 20 00:28:52 localhost kernel: AppArmor: AppArmor disabled by boot time parameter
Apr 20 00:28:52 localhost kernel: Mount-cache hash table entries: 512
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys ns
Apr 20 00:28:52 localhost kernel: ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys cpuacct
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys memory
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys devices
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys freezer
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys net_cls
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys blkio
Apr 20 00:28:52 localhost kernel: CPU: Physical Processor ID: 0
Apr 20 00:28:52 localhost kernel: CPU: Processor Core ID: 0
Apr 20 00:28:52 localhost kernel: mce: CPU supports 4 MCE banks
Apr 20 00:28:52 localhost kernel: [Hardware Error]: No human readable MCE decoding support on this CPU type.
Apr 20 00:28:52 localhost kernel: [Hardware Error]: Run the message through 'mcelog --ascii' to decode.
Apr 20 00:28:52 localhost kernel: Disabling lock debugging due to kernel taint
Apr 20 00:28:52 localhost kernel: CPU0: Thermal monitoring enabled (TM1)
Apr 20 00:28:52 localhost kernel: using mwait in idle threads.
Apr 20 00:28:52 localhost kernel: ACPI: Core revision 20110112
Apr 20 00:28:52 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Apr 20 00:28:52 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Apr 20 00:28:52 localhost kernel: ..MP-BIOS bug: 8254 timer not connected to IO-APIC
Apr 20 00:28:52 localhost kernel: ...trying to set up timer (IRQ0) through the 8259A ...
Apr 20 00:28:52 localhost kernel: ..... (found apic 0 pin 2) ...
Apr 20 00:28:52 localhost kernel: ....... works.
Apr 20 00:28:52 localhost kernel: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
Apr 20 00:28:52 localhost kernel: Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
Apr 20 00:28:52 localhost kernel: ... version: 0
Apr 20 00:28:52 localhost kernel: ... bit width: 40
Apr 20 00:28:52 localhost kernel: ... generic registers: 18
Apr 20 00:28:52 localhost kernel: ... value mask: 000000ffffffffff
Apr 20 00:28:52 localhost kernel: ... max period: 0000007fffffffff
Apr 20 00:28:52 localhost kernel: ... fixed-purpose events: 0
Apr 20 00:28:52 localhost kernel: ... event mask: 000000000003ffff
Apr 20 00:28:52 localhost kernel: NMI watchdog enabled, takes one hw-pmu counter.
Apr 20 00:28:52 localhost kernel: CPU 1 irqstacks, hard=d708e000 soft=d7090000
Apr 20 00:28:52 localhost kernel: Booting Node 0, Processors #1 Ok.
Apr 20 00:28:52 localhost kernel: Initializing CPU#1
Apr 20 00:28:52 localhost kernel: NMI watchdog enabled, takes one hw-pmu counter.
Apr 20 00:28:52 localhost kernel: Brought up 2 CPUs
Apr 20 00:28:52 localhost kernel: Total of 2 processors activated (12004.60 BogoMIPS).
Apr 20 00:28:52 localhost kernel: devtmpfs: initialized
Apr 20 00:28:52 localhost kernel: NET: Registered protocol family 16
Apr 20 00:28:52 localhost kernel: ACPI: bus type pci registered
Apr 20 00:28:52 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2
Apr 20 00:28:52 localhost kernel: PCI: Using configuration type 1 for base access
Apr 20 00:28:52 localhost kernel: bio: create slab <bio-0> at 0
Apr 20 00:28:52 localhost kernel: ACPI: EC: Look up EC in DSDT
Apr 20 00:28:52 localhost kernel: ACPI: Interpreter enabled
Apr 20 00:28:52 localhost kernel: ACPI: (supports S0 S3 S4 S5)
Apr 20 00:28:52 localhost kernel: ACPI: BIOS offers _GTS
Apr 20 00:28:52 localhost kernel: ACPI: If "acpi.gts=1" improves suspend, please notify [email protected]
Apr 20 00:28:52 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Apr 20 00:28:52 localhost kernel: ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
Apr 20 00:28:52 localhost kernel: ACPI: No dock devices found.
Apr 20 00:28:52 localhost kernel: HEST: Table not found.
Apr 20 00:28:52 localhost kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Apr 20 00:28:52 localhost kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x18000000-0xfebfffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci 0000:00:00.0: [1002:5833] type 0 class 0x000600
Apr 20 00:28:52 localhost kernel: pci 0000:00:00.0: reg 10: [mem 0xd2000000-0xd3ffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:00:00.0: reg 14: [mem 0xd0000000-0xd0000fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: [1002:5838] type 1 class 0x000604
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.0: [1002:4347] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.0: reg 10: [mem 0xd0001000-0xd0001fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.1: [1002:4348] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.1: reg 10: [mem 0xd0002000-0xd0002fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: [1002:4353] type 0 class 0x000c05
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: reg 10: [io 0x8040-0x804f]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: reg 14: [mem 0x00000000-0x000003ff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: [1002:4349] type 0 class 0x000101
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 18: [io 0x0170-0x0177]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 20: [io 0x8060-0x806f]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.3: [1002:434c] type 0 class 0x000601
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: [1002:4342] type 1 class 0x000604
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.5: [1002:4341] type 0 class 0x000401
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.5: reg 10: [mem 0xd0003000-0xd00030ff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.6: [1002:434d] type 0 class 0x000703
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.6: reg 10: [mem 0xd0003400-0xd00034ff]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: [1002:5835] type 0 class 0x000300
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 18: [mem 0xd0100000-0xd010ffff]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: [104c:8026] type 0 class 0x000c00
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: reg 10: [mem 0xd0208000-0xd02087ff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: reg 14: [mem 0xd0200000-0xd0203fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:02.0: [14e4:4320] type 0 class 0x000280
Apr 20 00:28:52 localhost kernel: pci 0000:02:02.0: reg 10: [mem 0xd0204000-0xd0205fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: [10ec:8139] type 0 class 0x000200
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: reg 10: [io 0xa000-0xa0ff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: reg 14: [mem 0xd0208800-0xd02088ff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: [104c:ac54] type 2 class 0x000607
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: [104c:ac54] type 2 class 0x000607
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: reg 10: [mem 0x00000000-0x00000fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.2: [104c:8201] type 0 class 0x000880
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.2: reg 10: [io 0xa400-0xa43f]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: [1033:0035] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: reg 10: [mem 0xd0206000-0xd0206fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: [1033:0035] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: reg 10: [mem 0xd0207000-0xd0207fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: [1033:00e0] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: reg 10: [mem 0xd0208c00-0xd0208cff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode)
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
Apr 20 00:28:52 localhost kernel: pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:02 [bus 02-04]
Apr 20 00:28:52 localhost kernel: pci_bus 0000:00: on NUMA node 0
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
Apr 20 00:28:52 localhost kernel: vgaarb: loaded
Apr 20 00:28:52 localhost kernel: PCI: Using ACPI for IRQ routing
Apr 20 00:28:52 localhost kernel: PCI: pci_cache_line_size set to 64 bytes
Apr 20 00:28:52 localhost kernel: reserve RAM buffer: 000000000009f800 - 000000000009ffff
Apr 20 00:28:52 localhost kernel: reserve RAM buffer: 0000000017f70000 - 0000000017ffffff
Apr 20 00:28:52 localhost kernel: NetLabel: Initializing
Apr 20 00:28:52 localhost kernel: NetLabel: domain hash size = 128
Apr 20 00:28:52 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
Apr 20 00:28:52 localhost kernel: NetLabel: unlabeled traffic allowed by default
Apr 20 00:28:52 localhost kernel: pnp: PnP ACPI init
Apr 20 00:28:52 localhost kernel: ACPI: bus type pnp registered
Apr 20 00:28:52 localhost kernel: pnp 00:00: [bus 00-ff]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000a0000-0x000bffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000c0000-0x000c3fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000c4000-0x000c7fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000c8000-0x000cbfff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000cc000-0x000cffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000d0000-0x000d3fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000d4000-0x000d7fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000d8000-0x000dbfff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000dc000-0x000dffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000e0000-0x000e3fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000e4000-0x000e7fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000e8000-0x000ebfff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000ec000-0x000effff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x18000000-0xfebfffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [io 0x0cf8-0x0cff]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [io 0x0000-0x0cf7 window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [io 0x0d00-0xffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x0000-0x001f]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x0080-0x008f]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x00c0-0x00df]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x040b]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x04d6]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [dma 4]
Apr 20 00:28:52 localhost kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:02: [io 0x00f0-0x00fe]
Apr 20 00:28:52 localhost kernel: pnp 00:02: [irq 13]
Apr 20 00:28:52 localhost kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:03: [io 0x0070-0x0073]
Apr 20 00:28:52 localhost kernel: pnp 00:03: [irq 8]
Apr 20 00:28:52 localhost kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:04: [io 0x0061]
Apr 20 00:28:52 localhost kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:05: [io 0x0060]
Apr 20 00:28:52 localhost kernel: pnp 00:05: [io 0x0064]
Apr 20 00:28:52 localhost kernel: pnp 00:05: [irq 1]
Apr 20 00:28:52 localhost kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:06: [irq 12]
Apr 20 00:28:52 localhost kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x002e-0x002f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x004e-0x004f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x00b0-0x00b1]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0092]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0200-0x020f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c14]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c50-0x0c52]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c6c]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c6f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0cd6-0x0cd7]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x1080]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x8000-0x803f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x8800]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0xfe00]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0xfe10-0xfe11]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0x000e4000-0x000fffff]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0x00100000-0x17ffffff]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0xd0000000-0xd0000fff]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0xfff80000-0xffffffff]
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0200-0x020f] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c14] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c50-0x0c52] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c6c] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c6f] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0cd6-0x0cd7] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x1080] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x8000-0x803f] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x8800] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0xfe00] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0xfe10-0xfe11] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0x000e4000-0x000fffff] could not be reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0x00100000-0x17ffffff] could not be reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0xd0000000-0xd0000fff] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0xfff80000-0xffffffff] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (disabled)
Apr 20 00:28:52 localhost kernel: pnp 00:09: [io 0x0378-0x037f]
Apr 20 00:28:52 localhost kernel: pnp 00:09: [io 0x0778-0x077b]
Apr 20 00:28:52 localhost kernel: pnp 00:09: [irq 7]
Apr 20 00:28:52 localhost kernel: pnp 00:09: [dma 1]
Apr 20 00:28:52 localhost kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
Apr 20 00:28:52 localhost kernel: pnp: PnP ACPI: found 10 devices
Apr 20 00:28:52 localhost kernel: ACPI: ACPI bus type pnp unregistered
Apr 20 00:28:52 localhost kernel: Switching to clocksource acpi_pm
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: BAR 15: assigned [mem 0x28000000-0x2fffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: BAR 1: assigned [mem 0x30000000-0x300003ff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: BAR 1: set to [mem 0x30000000-0x300003ff] (PCI address [0x30000000-0x300003ff])
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Apr 20 00:28:52 localhos

You have to get an app to do this, luckily I found this...I
use it for my other monitors - 2nd Screen Saver runs an independent screen saver on the other screen(s)!
http://2ndscreensaver.blogspot.com/

645 Ultra-C and ATI Radeon 9000 Pro

Hi there --
I have a 645 Ultra-C with P4 1.7mhz attached to it. It has 640mb of RAM, Audigy 2, and brand new ATI Radeon 9000 pro. It's running WindowsXP
The issue is that upon installing the ATI card into the machine WindowsXP is freezing and then recovering with an error message about a device failure. In checking the system log I see an error message about the ATI driver being stuck in a loop.
I am using the driver I downloaded from the ATI web site along with the ATI control panel software also downloaded from the ATI site. The drivers are the latest.
I am able to regain stability by disabling hardware acceleration in Display Properties. This is less then ideal.
I'm using version 7.2.0.1130 of the AGP driver. I'm not sure which BIOS rev, it would be the one the motherboard shipped with. However I'm unable to flash the BIOS really since I do not have access to a 98/ME box. As I understand it I can only flash the BIOS from a 98/Me startup floppy on a non-FAT machine. LiveUpdate gives me an error message about the service not being started and that LiveUpdate only works with MSI graphics cards.
In the BIOS I’ve switched the primary video card from PCI to AGP. I’ve even downgrade from AGP 4x to APG 2x using the AGP utility.
Any ideas?

flashed up to 1.90 via LiveUpdate2, after pulling ATI card and running on tnt2 card, and now I'm cranking

Can I use an ATI Radeon 9000 Pro Mac Edition 128MB Video Card in a Mac Min

Looking to buy a Mac mini.
In 2004 I upgraded the graphics card in my dual processor 450 MHz G4 desktop with an ATI Radeon 9000 Pro Mac Edition 128MB Video Card to run a 20-inch Cinema Display.
Now my G4 has died (probably the power supply and I'm being told it's not worth it to fix---buy a Mac mini!)
But I've read that the graphics card in the Mac mini is not stellar and I'm wondering if I could reuse the ATI Radeon 9000 Pro Mac Edition 128MB Video Card in the Mac mini. Would this be a good thing to do?
Any thoughts/advice would be greatly appreciated!
Cheers,

There are people that claim to have hooked up a PCI-e 1x card (yes, the Mini uses PCI-e). But that requires some serious hardware modifications including soldering, a PC power supply, and so on. But that card is an old AGP card so even that wouldn't even work for what you've got.

ATI Radeon 9000 Pro and 1440x900 resolution on G4?

I am looking to purchase a new widescreen monitor (Viewsonic VA1912WB) which supports a native resolution on 1440x900. I am trying to determine if the ATI Radeon 9000 Pro card will properly support this resolution. Anyone have a clue, or tried it yourselves? Thanks!

I had found that page and had drawn the same "hopeful" conclusion that you are suggesting. I also looked in my displays preference pane and noticed quite a few options that aren't on the ATI site as "supported displays," which leads me to believe it's possible.
I've checked out some other boards (pc based) and they are able to make it work but it involves modifying all sorts of driver files. Stupid PC's!
Anyone else out there have the ATI card and the ability to test that resolution?

ATI Radeon 9000 Pro/ Layer heavy Photoshop project/

When working on large Photoshop files, whenever I make any move or change, file window goes blank, layers disappear, all that's visible is underlying grid.
Takes forever to do anything...
Is this a video card problem? Or is it my monitor? If a vid card problem,
what is a good replacement for ATI Radeon 9000 Pro?
ATI Radeon 9000 Pro:
Chipset Model: ATY,RV250
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: ATI (0x1002)
Device ID: 0x4966
Revision ID: 0x0001
ROM Revision: 113-99702-127
Monitor:
L1975NW:
Resolution: 1440 x 900 @ 60 Hz
Depth: 32-bit Color
Core Image: Software
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display Connector:
Status: No display connected
Thanks much!

How clean is your Photoshop scratch disk? The scratch disk is an often overlooked cause of PS slowness. Ideally, your scratch disk should have an amount of contiguous free space equal to at least three times the size of the file you are working on.

ATI Radeon 9000 PRO Mac Edition supported under Tiger ?

Hi all,
we are still using OS X 10.3.x for our venerable G4 AGP mac. Back in 2005 when Tiger was the new OS, we were told that our ATI Radeon™ 9000 PRO Mac Edition graphics would not be supported under 10.4.x. Has this changed? I don't want to upgrade to Leopard yet, but would like to use some Tiger features as Mail 2.0 or improved iSync.
Thanks for any input ...
Asbjoern

So is this why all my fonts are screwed on my G4 MDD dual 1.25 using a ATI 9000 Pro?
Seems as tho it works perfectly fine when i had 10.4.10 but when 10.4.11 was released all my fonts are screwed. Even when booting from a OSX CD. I installed 10.5 and still doesnt work.
looks like i need a 9600.

Satellite L350D-20D: ATI radeon 3100 with Ati Catalyst Control

i was instaled on my Satelite L350D 20-D graphic drivers from Toshiba website
But after instalaton i dont have Ati Catalyst Control Center i have ion my Program Files some Foler with instalation but this is some 0.2 MB ,,,
i have now this drivers :
http://driverscollection.com/?H=Radeon%20HD%203100&By=ATI&SS=Windows%20XP
Manufacturer:ATI
Hardware:ATI Radeon HD 3100
Software type:Catalyst Software Suite
Version:11.8
File Size:51.38Mb (53881048 bytes)
Released:16 Aug 2011
Uploaded:27 Aug 2011
Views:159
Downloads:55
System:
Windows XPWindows XP Media Center
Description:Catalyst Software Suite for ATI Radeon HD 3100
Package Includes:
Display Driver
OpenCL Driver
ATI Integrated Driver
Catalyst Control Center
Download ATI Radeon HD 3100 Catalyst Software Suite v.11.8
im not sure if its not t o `BIG` driver for this graph card..
cus its for Ati Radeon HD 3100 and in my Toshiba L350D 20-D i have Ati Radeon 3100 ....

Hi
Here you can download the latest Catalyst software:
http://www.amd.com/us/products/technologies/amd-catalyst/Pages/catalyst.aspx

T500 ATI Radeon issue with Alibre Designer 11.2

Note - I uploaded a video showing the symptom to Youtube: http://www.youtube.com/watch?v=GTg3piX-H8I
I have a Thinkpad T500 the switchable graphics ATI Radeon 3450 for accelerated 3D/OpenGL support. I got this to be able to run CAD software. Unfortunately, there is a bug and Alibre Designer will not render reference lines when used with the ATI Radeon driver. This is not good, as reference lines are very much needed while drawing designs. The problem goes away if I switch to the slower Intel Media graphics driver.
I have installed the very latest ATI drivers and Catalyst Control Center, per Lenovo (http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7vd541ww.txt) -- the CCC currently shows:
Item Value
Driver Packaging Version 8.563.2.1-090401a-079160c-Lenovo
Provider ATI Technologies Inc.
2D Driver Version 7.01.01.849
2D Driver File Path /REGISTRY/MPCH INE/SYSTEM/ControlSe
Direct3D Version 7.14.10.0630
OpenGL Version 6.14.10.8306
Catalyst® Control Center Version 2009.0401.1328.22301

Well, with Alibre's help, we tried turning off the switchable graphics per:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70495#g5
After the first reboot, the hardware was recognized, but the ATI driver was not properly loaded; but after the second reboots, the ATI driver was installed correctly. Then, Alibre worked correctly.
It appears that the switchable graphics driver support is interfering with the proper operation of the underlying ATI driver. I'm sad to lose switchable graphics support, but at least I can work!

ATI Radeon Card with 2 DVI LCD Display

At last, I made a big step forward by purchasing the new MP. I already have a 23" Apple Display and intend to buy another DVI display (non Apple). How do I connect both LCD screen to the ATI Radeon card? Do I need to purchase any adaptor?

Hi SamsonSimon;
Here are the specs on the ATI Radeon card;
ATI Radeon HD 4870 includes two video ports: one Mini DisplayPort and one dual-link DVI port. This allows you to connect both the 24-inch Apple LED Cinema Display or another Mini DisplayPort-based display, and a DVI-based display such as the 30-inch Apple Cinema HD Display. Display adapters are available to connect VGA displays.
Since it says it has two ports, one Mini DisplayPort and one dual-link DVI port, it would seem you are going to need an adapter for the second LCD screen.
Allan

G4 1.25GHz with ATI Radeon 9000 Pro ready for Motion?

Hi there,
I'm looking into an unexpensive way to give Motion 2 a trail, since it won't install on my old faithful G4 dual 500. Should the above configuration be enough? I have an opportunity tu buy the single processor, Airport Extreme equipped version (there were several versions produced the same year).

FYI the 9000 is a AGP (the 9200 is the PCI card)
the 9000 is lacking pixel shaders (where Motion gets it power)
I ran Motion 1 and Motion 2 since it came out on my dual 1.25 with a 9800 and it FLEW
better then a G5 with a 5200 or 9600
with this card (under $260)
http://eshop.macsales.com/item/ATI%20Technologies/100435058/
you can run motion very well for now on your system
(that page BTW pat is talking about the Standard video card not after market ones)
DAVE

ATI Radeon 9000 Pro Mac AGP (driver needed for OS 9.2?)

Hi guys!
How's everybody doin?
I just picked up a used ATI 9000 AGP 128 MB (as an upgrade for my G4 Quicksilver 800 MHZ).
I'm using 2 HD's (one with OS9), the other (with OSX)
I think OS 9.2 will do ok without the need for a driver, but I just wanna make sure ...
Thanx
Everyone is very helpful around here
Mike

Hello again Carl, and Dave
I know it's been a while since we last talked about this issue. Well apparently, I do have OS freezing problems
with 9.2 and the ATI 9000 Mac Pro - take a look:
http://discussions.apple.com/message.jspa?messageID=4289264#4289264
Wonder if your driver would solve this?
But can I put your driver in the system while it's still functioning with the older OEM video card back in?
(that's the only way I can get the system not to freeze)
Thanks
Mike

ATI Radeon 9000 with a K7T Turbo2

Similar Messages

Maybe you are looking for