ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac

We want to be able to use our 30" cinema display from the G4 and was advised in a previous discussion to buy the ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac. It doesn't seem to be available anywhere. Does anybody know of an alternate video card that's currently available that will get us there? (We had the display running from a G5 that quit / logic board failure).
Many thanks,
Philip

The Nvidia 7800GS is a flashed card, runs a 30" with ease.
BruinMacs on Ebay is a great place to get one, you support the guy who wrote the original ROM for these.
He doesn't seem to have any for sale right now, but if you email him, maybe he will list one.
There are also flashed X800s that work on your MDD and can run a 30". They are pricey but will offer dual DVI while the 7800GS is single DVI with VGA for second display.
There are also flashed 6600GT AGP cards which will work, but harder to find.
Any of the above 3 will run circles around a 9600.

Similar Messages

  • ATI Radeon 9600 Pro / 256MB + Leopard

    Hello i have problem to install correct my ATI Radeon 9600 Pro / 256MB. I Installed ATI Radeon 9600 Pro / 64 MB on my mac, because i could not install Logic Pro 8, and I Installed succesful. Install programm said by ATI Radeon 9600 Pro / 256MB that Quartz extreme are not supported, and I have 0 MB VRAM. That's not right. I Tried install update for ATi, after no display. I install Grafic update for OSX and the same. I was found that in system / Library / Extensions/ are ATI Radeon 9700.kext . When I delete this file i can run my Cinema 30'' display, but I cannot run Quartz Extreme. But this card are supported for Quartz extreme. When I put my old card
    ATI Radeon 9600 Pro 64MB - is supported for Quartz Extreme but my display Cinema 30'' can only 1280 x 800. What can I do ?
    Message was edited by: knoche

    Das Problem ist gefunden. Der Mac wurde 2003 gekauft, und wie viele von dieser Serie waren Motherboard fehlerhaft. Ich habe 2 davon. Die Motherboards waren dann 2004 ausgetauscht zu unterschiedlichen Zeiten. Der 1. in April andere November. Dann war alles scheintbar O.K.
    Erst jetzt haben wir gesehen durch den Austausch von Grafikkarten das etwas nicht stimmt.
    ES WAR MOTHERBOARD DIE FEHLERHAFT IST. In 2. G5 von 2003 geht die Karte einfach wunderbar. Ich hofe das Ich damit helfe den Tausenden da draussen die gleiche Problem haben vor allem in Apple forum, und keiner hat Lösung.
    Vielen Dank an die Firma Colormatch - die Jungs sind einfach Klasse Schlau.

  • ATI RADEON 9600 PRO 256MB AGP VIDEO CARD PC/MAC

    This card is available from:
    https://www.directdial.com/100-435065.html
    My X800 XT blew up my logic board.
    This was the best 256MB card I could find.
    They had 30 of these when I ordered today at $209.

    That sounds attractive except for me, living in Canada.
    The handling and brokerage fee charged by the US delivery service,
    UPS or FEDEX, make the Canadian store's price more attractive.
    Plus I ordered it Monday and get it today.
    BTW stock is back to 29 as of today.

  • ATI Radeon 9600 Pro and 2560 x 1600

    Hi,
    I've got a Radeon 9600 pro and just purchased a new 30" display. However, I can't seem to get it running at 2560 x 1600 - does this card support this resolution?

    You will need a graphics card with dual-link DVI.
    Starting with the fastest:
    ATI Radeon X800 XT 256MB (ADC, dual-link DVI)
    <http://www.welovemacs.com/0831xeghr.html>
    NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
    <http://www.welovemacs.com/6613332.html>
    NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
    <http://www.welovemacs.com/6613441.html>
    ATI Radeon 9650 XT (Single-link, dual-link DVI)
    <http://www.mac-pro.com/ATI-Radeon-9650-256MB-for-G5-661-3593?sc=2&category=42>
    ATI Radeon® 9600 Pro PC & MAC Edition 256MB AGP (Single-link, dual-link DVI)
    <http://shop.ati.com/product.asp?sku=3170809>

  • Help : Will ATI Radeon 9600 Pro run a 30" Cinema Display ? ? ?

    just a simple question as the subject suggests /
    i have a 1st generate Power Mac G5 Dual 2GHZ / with Radeon 9600 Pro
    graphics card . i would simply like to know if it will plug an play nicely
    with a 30 inch monitor - be it the Apple Cinema Display or Dell -
    anyone have any definitive answers / my thanks in advance
    best,
    lex

    You need a different graphics board with dual-link DVI to run the 30" at full resolution. The AGP cards Apple sold that have dual-link DVI ports are:
    ATI Radeon 9650 XT (one single-link, one dual-link DVI)
    NVIDIA GeForce 6800 GT DDL (two dual-link DVI)
    NVIDIA GeForce 6800 Ultra DDL (two dual-link DVI)
    Apple doesn't sell these as retail items, but might sell them as replacement parts, or you could look for them used. Be sure to get Mac versions.
    There are two new graphics boards that will work:
    ATI Radeon® X800 XT MAC Edition RoHS 256MB AGP (one ADC, one dual-link DVI)
    <http://shop.ati.com/product.asp?sku=3170810>
    ATI Radeon® 9600 Pro PC & MAC Edition RoHS 256MB AGP (one single-link, one dual-link DVI)
    <http://shop.ati.com/product.asp?sku=3170809>

  • Can I replace an ATI RADEON 9800 PRO-(256MB)-MAC EDITION with Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5

    Hi,
    I am trying to help a friend whose graphics card has bust.
    The old one was an ATI RADEON 9800 PRO-(256MB)-MAC EDITION.
    I've been looking on ebay and it seems a lot cheaper to get a Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5.
    Can I just swap them over?  The connectors are not identical according to the photographs.
    Thanks.

    I'd like to thank everyone for all the really useful information in this thread. It helped me solve a similar problem, which I'll describe here briefly in case it helps someone else.
    I have a 2004/5 dual 2 Ghz PowerPC G5 and an Apple Cinema HD display linked, as I later found out, with the now defunct ADC connector. The display suddenly started to look like that scene in The Matrix, when code falls like rain down the screen, and I worked out I needed to replace my Radeon 9800 pro video card (I discovered the board was blue when I removed a thick layer of dust).
    I took japamac's excellent advice and bought a Geforce 6800 Ultra from the linked eBay seller in Hong Kong, who delivered it extremely quickly, along with the cables to plug it into the DVD drive power source and a CD with installation instructions. It was only then that I realised the card had two DVI connectors and my display needed ADC (I hadn't understood the difference).
    eBay came to the rescue again with a seller who had a secondhand DVI to ADC adapter, which Apple produced  when it phased out ADC about six years ago but no longer sells. It has its own power supply and looks like a large version of the Mac laptop power cables - and has added signifcantly to the pile of spaghetti under my desk.
    Installing the Geforce 6800 Ultra is fiddly, and a bit scary if you're not used to delving into the insides of a Mac, but the instructions were clear and illustrated with useful photos. The video cable has four connectors. Two fit into the end of the card, the other two (linked in a Y shape) form a bridge between the DVD/superdrive and its power cable. You have to remove the DVD drive, unplug it, and then plug one of the two Y video card connectors into the DVD power cable and the other into the DVD drive itself. Then you replace the DVD drive, plug the two remaining cable connectors to the video card and ease it into the old card's AGP slot.
    Finally, with the G5 reassembled, plug the adapter's DVI connection into the back of the card, plug the Cinema Display ADC cable into the adapter block, plug the adapter's USB cable into the G5 (this enables the the USB ports on the back of the display to work), and power up.
    At the time of writing, the display has been up and running for a couple of hours and all seems fine.
    Thanks again everyone for all your help and advice. If it wasn't for communities like this, it would be virtually impossible to solve problems with old but still serviceable Macs.

  • PPC G5 with ATI Radeon 9600 Pro monitors not getting signal

    hi there.
    I have a PPC G5 with ATI Radeon 9600 Pro graphics card and I cannot get a monitor to work properly. I am trying an old Apple Studio Display (circa 2001) and a Viewsonic VA520.
    It seems like the Apple display should work, but all I get is a black screen. I ran it through a DVI to ADC adapter and had it working for a short period of time, but for some unknown reason it went back to the black screen.
    The Viewsonic gives a 'NO SIGNAL' screen and not much else.
    Both of these monitors have worked on other G5's. I am guessing this is a graphics card issue.
    I appreciate any kind or helpful words! Thank you.

    I'm having a similar problem with the G5 not recognizing a VGA monitor on either video out. I have no problem using two monitors with the DVI inputs but I need to use a VGA video splitter for a third screen. It worked at the beginning of this week, and now it refuses any VGA out, even without the splitter, just going into directly into the VGA in of one of my working monitors via a DVI-VGA adapter(i've tried different ones). I read another post about trashing "displays" and "windowserver" preference files but i haven't yet tried that..any clues??

  • ATI Radeon 9600 Pro fuzziness

    Hi,
    I have a G5 tower with ATI Radeon 9600 Pro running two fujitsu LCDs, both at 1680x1050, 60 hz. Today, they're both incredibly fuzzy - bordering on unusable. They remain this way if I step down to lower res.
    This is only on my login. My wife's login = crisp and clear. Likewise the login screen. Have tried resetting the PRAM, no change.
    One thing I do notice today is that the very far right edge of the menu bar is bleeding over into the right screen, which I don't recall it used to do.
    Also, the display is shifting about on the horizontal axis, like it's trying to find a better line sync or something (to use an old CRT metaphor)
    Any help much appreciated, Robbie
    Dual 2GHz G5 Mac OS X (10.4.9)
    Dual 2GHz G5 Mac OS X (10.4.9)

    Hi-
    Welcome to Discussions!
    Something new in your (user) startup items?
    Since it only occurs in your account, you could have some incompatible extension/utility, or be missing one.
    Might compare yours to your wifes-
    System Preferences/Accounts/Login Items
    Might check to see if you have any Universal Access preferences enabled-
    System Preferences/Universal Access

  • What would you replace an ATI Radeon 9800 Pro (256MB) with?

    Hi,
    I started a thread before asking whether I could replace a 256MB card with a 128MB card, even though the interface was a different shape.
    But, as I know so little about Macs and graphics card, it seems wiser to ask
    What would you replace an ATI Radeon 9800 Pro (256MB) with?
    The computer is user for photo editing and normal internet/email use.  The photo editing is done on Adobe Photoshop for professional treatment of photographs.
    The computer is a Power Mac G5 (1.6GHz) and budge is £80 / $120.
    Thanks in advance, Franc.

    Hi-
    Please check my recommendations in your other thread.
    Better options for the 9800 Pro are the Radeon 9800 XT, Geforce 6800 GT, Geforce 6800 Ultra, or if one has the money or finds a good deal, a Radeon X800 XT.
    For your budget and uses, the Geforce cards are a performance value buy.
    BTW, I have owned all of the cards, used all of the cards, and tested all of the cards.
    Graphics Cards- ATI and Nvidia
    See my testing pages starting here:
    Page 1: Open GL

  • ATI Radeon X800 XT or ATI Radeon 9600 Pro Mac Edition for 30" display

    I currently have the ATI Radeon 9600 Pro installed in my G5 2.0 DP and it is running my 30" display, but I am having some isssues when I play DVD's the pictures seems to skip every few seconds like it isn't playing fast enough, or it hesitates. I bought the ATI Radeon X800 XT and wanted to know if that would be a better card before I switch it out.

    The X800 is a faster card but DVD playback doesn't put much load on the card, so the X800 probably won't help. If it skipping on more than one DVD, the DVD drive is probably having problems. Cleaning the lens ay help.

  • 1360 X 768 Resolution with ATI Radeon 9600 Pro

    Maybe this isn't the right forum, but I've been surfing for hours with no luck so please forgive me if this seems out of place.
    I output a show recently to QuickTime at 720 24 fps. I'd like to watch it on my 40" Samsung 720 HD TV. I cabled up and managed to get a picture in nearly fullscreen and nearly appropriate aspect ratio, but it doesn't look all that hot. Samsung tells me I want to set my Display settings on my Mac to 1360 x768 to achieve optimum picture. I told them I don't have that option in my settings. They said I probably need to update my driver on my ATI Radeon 9600 Pro video card. I did, still no 1360x768 setting. They said I might want to install the ATI Displays utility. That doesn't seem to offer anything useful. ATI's online support says I might want to install ATI's latest ROM updater, but I can't find any such thing even though the web seems full of mentions of such a beast.
    Anyone have any ideas or any suggestion as to where I should post this question?
    Martin

    FYI:
    http://discussions.apple.com/help.jspa#answers
    Steve should get the Solved Green Star...
    Patrick

  • Total lockup KM4M-L w/ ATI Radeon 9600 Pro

    OK, its been a while since ive had any problems at all but unfortunately I am getting problems with my KM4M-L based PC completely locking up.
    I am pretty sure that this is a graphics related issue since it started when I installed an ATI Radeon 9600 Pro 128MB.
    I tried removing old nVidia drivers completely, have jusy formatted and re-installed Windows XP Pro with SP2, but the problem is still there.  I have tried the card on AGP 2x and 4x, with fastwrite enabled and disabled, and different memory allocations of 64MB and 128MB, but still no joy.
    I have also tried the latest two sets of drivers from ATI with no joy, and the latest chipset drivers & BIOS revisions from MSi.
    Does anyone know of any compatibility issues between my hardware or something I may have missed in my frustration? Thanks, Huw
    Mercury 400W PSU Specs:  3.3V 28A  5V 40A  12V 17A
    MSI KM4M-L
    AMD Athlon XP 2600+
    Crucial 1x512MB PC2700 RAM
    ATI Radeon 9600 Pro 128MB
    M-Audio Audiophile 24/96
    Excelstor 80GB 7200RPM HDD
    Maxtor 20GB 5600RPM HDD
    LG 52x32x52 CDRW
    Unbranded 32x CDROM
    S-Talent 128MB Flash Drive
    Netgear WG111 USB 802.11g Network Adapter
    Thermaltake Xaser Desktop

    OK, I have tried a number of things since posting last.
    I have been running the PC without the video card, just using the onboard graphics, which didnt seem to help.
    I have air dusted, and replaced the GPU heatsink and fan for a large machined one with a more appropriate size of fan but im still getting some problems:
    The first is the complete lock-up, which still occurs at seemingly random intervals with no pattern at all.
    The second problem is quite frequently on botting the computer, when windows has loaded, the screen display seems to breakdown into random pixels as soon as I start using anything, the effect is hard to describe but its almost as if the screen is being airbrushed, very odd
    I should add that I have also removed the Maxtor HDD, since last posting, and also run a series of MemCheckx86 tests which seem to indicate that the RAM is fine.
    Any ideas anyone? I am starting to suspect that there may be multiple problems contributing to this annoyance

  • MS-6309 motherboard and ATi radeon 9600 Pro

    I have a MS-6309 motherboard. I have recently installed an ATi Radeon 9600 Pro 128MB graphics card and am having some problems. I am running Windows 98. I can't get Direct 3D and AGP Texture Acceleration (this is disabled) to work. I want to download the latest drivers for my motherboard but don't know which link to choose on the motherboard drivers page of the MSI web site.
    The problems that occur are:
    1) The screen freezes up
    2) The graphics on the screen go blurry
    3) Everything stops and the monitor switches off
    I am sure this is a driver issue and not a hardware issue. Please can someone help me!

    chances are you need a better psu than you had before actually
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=124
    has the drivers

  • MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP) problems

    i recently purchased a MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
    it says it can automaticlay download new bios etc using MSI live update,
    but when i click on VGA Bios, it says my card does not do this??? how do i check the bios and if there is a new one available?
    any ideas?
    ive heard you can unlock the MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
     from 8 pipes to 12 pipes, how do i do this
    also any idea on what the best drivers are for a MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
    catalyst?
    omega?
    MSI std drivers?
    thanks

    Jobbie,
    The best Drivers for your Vid Card are the ATi Catalyst Drivers.
    Take Care,
    Richard

  • No sleep after upgrading to a  radeon 9600 pro 256MB graphics card

    I swapped my original radeon 9600 pro 64MB with a 9600 pro 256MB card and now my G5 dual 2.0 tower will not sleep. Should I download the 9600 pro drivers that are on the ATI support site, they only list these drivers for OSX 10.2, 10.3 and 10.4 and since I have 10.5 I am hesitant to do so. There seems to be a definite increase in graphic speed with the 256MB card and since I will be doing a lot of iphoto and imovie on this computer the upgrade would be a big help.
    Ron

    Can you find your model here? http://support.apple.com/specs/#powermac
    Well, if you think you saw the PMU button near your RAM that would be it, just hold it down for a second or two.
    Well, I'm not surprised that the PC is faster. You're running a very new OS on a very old machine. But Macs of any vintage are great, aren't they.
    When you got your video card did you install the software from the disk that came with it?
    One thing you might try if not sleeping is really bugging you would be to download and reapply the entire full 10.5.5 Combo Update. That has a way of correcting things when they've become corrupted.
    It's pretty massive so if you're using a modem it would take quite awhile.
    http://support.apple.com/downloads/MacOS_X_10_5_5_ComboUpdate
    Edit and PS: Do you have your data backed up on a drive you can start up from? Like firewire or another internal? Here is a great app, free for it's basic job, that makes perfect copies of your system and everything on it.
    Message was edited by: Samsara

Maybe you are looking for