ATI Radeon 9700 Pro (Original)

Just a little question; Why doesn't ATI Radeon 9700 Pro (Original) work properly with K8N Neo Platinum 1 and 2 ? At any of these mboards  computer hangs on a reboot. It's not a deadly issue to me due to that i use the 9700-card on a computer that always is running. But have i maybe missed something ??? 

I had the same problem with my 9700 Pro (built by ATI) on the K8N Neo2. To resolve it, I upped my AGP voltage in BIOS to 1.6 volts. Worked fine then. I've since switched cards to a Leadtek 6600GT and leave the AGP voltage at 1.5 volts. It works fine so I think maybe it's an ATI/MSI problem.    . Hope this helps.
Modoc.

Similar Messages

  • MSI KT4 ULTRA-BFISR + Ati Radeon 9700 pro = not good??

    Hello everybody!
    First of all, i youst have to say that i think MSI have the best motherboards....
    Here's the problem (i haven't buyed anything yet!):
    I am going to buy MSI KT4 ULTRA-BFISR and ATI Radeon 9700 Pro, but i have read many places that Radeon aint working with MSI KT4-based cards! Im am going to buy an 520W Power (i aint so good in english so i hope you now what i write  :D )
    I am also going to buy 2 x Cosair pc3500 xms ram... Is this one working with the motherboard by the way?
    But my question is: Will the Ati Radeon 9700 pro work with this card? (i must remember to buy the 1.3 version!) I am gonna get my Radeon 9700 pro from USA, how can i now when i order that is an 1.3 card?
    Thank you for answering!  :]

    I think also that even there is two drivers, that is not a reaseon why it isn't work. One time I install only standard VGA drivers, but result was that I got two standard VGA driver.  8o
    First time I try without VIA drivers, then with 4.42 and 4.43 VIA drivers. Result was almost same all the time, it always crash when Nature test start, but this exist also to older mobo (Abit KT7A-RAID). Problem exits few games they lock up or stuttering. Ati demos works fine, but one time that car demo stuttering a lot, but I transfer data at same, so I'm not sure what was reason.
    This moment I don't have possibilities to try Hyperion 4.45 drivers or something else, because it's my friend computer.  
    MSI KT4V 6712 (Bios 1.0)
    AMD Athlon 1.2
    512 MB DDR 333 RAM
    SoundBlaster Live
    ATI Radeon 9700 Pro (Club3D)
    Power 300W
    Realtek Ethernet card
    Samsung 40GB harddrive
    Samsung DVD
    VIA 4.42 and 4.43
    WIN98

  • ATI Radeon 9700 Pro - Power Supply too small?

    I'm having a problem with my Powercolor 9700 Radeon Pro. My system will simply not power when i plug this video card in (no power supply start, no posting beeps, nothing).
    The 9700 pro card I have will work fine on another PC that I have with a lesser power supply and lesser cpu so I know the card is ok. My Geforce3 card works fine in the new 865PE computer, so it seems the MSI board/AGP slot is ok.
    I've tried unplugging all peripherals (HDDs, CD, DVD drives) and still no power up when the 9700 is plugged into the power supply.
    My system consist of:
    MSI 865PE Neo2 FISR(v1.7)
    P4, 2.8, 800fsb
    512MB Corsair XMS Twinx (2 256MB sticks)
    2 HDD (Western Digital, 60 & 120GB)
    DVD/CD drive
    CD-RW drive
    Soundblaster live
    2 internal case fans
    360w PS
    Stats for power supply:
    +5v - 35A
    +12v - 17A
    +3.3v - 28A
    Bios settings:
    CPU BUS (FSB) - 200
    AGP Voltage - 1.5
    PCI/AGP speed (PCI clock) - 66.33/33.33
    PCI latency timer - 32
    AGP setting - (if this is the 4x/8x setting, I can't find a way to change it)
    APIC ACPI SCI IRQ - disabled
    AGP aperature - 64MB
    Dynamic overclocking - off
    Performance mode - slow
    hyperthreading - disabled
    I've tried upping the AGP voltage to 1.6 and I have disabled cacheing.
    I read that some folks have recommended setting the AGP down to 4x, although for the life of me, I cannot find a way to do that in bios or anywhere else.
    Does this power supply sound acceptable? Do the 9700's draw their power off the 12v circuit?  If this PS is weak, then what +12v amp. should I aim for?
    Does anyone have any ideas of any of issues that might cause my system to not power up like this?
    Thanks for any help!

    Thanks for responding Sean,
    I did try upping the AGP voltage to 1.6v while only having the the 9700 card attached to the power supply.  Same result, no power-up what so ever.
    The other computer's video drivers are were the standard windows vga drivers.   I don't think that really is a problem since I can't get the computer/power supply to even come on, let alone load windows.
    What baffles me is that I have a geforce3 agp card that works fine in the neo2, and the 9700 works fine in another computer.  Other then the power supply, or a problem/setting with the mainboard, I can't imagine what the problem is.  The thing is, I don't want to shell out $100 for a power supply until I know that'll fix it.
    thanks

  • Would an ATI Radeon 9700 Pro driver work...

    with it's mobile counterpart?

    The fglrx driver should have some support for mobile chipsets.  You'd have to try it to see if it includes yours, since there's been a lot of problems concerning naming inconsistencies between mobile and desktop GPUs.  (the mobile 9500 may actually be the same chip as the desktop 9200 was a big one, although I'm not sure I have the numbers right!)

  • Radeon 9700 Pro & KT4V-L

    Addition=ATI Radeon 9700 Pro displays Texture corruption, locks up
    And freezes in OpenGl,
    9700 Pro freezes and locks up in EVERY D3D Game I have attempted to Play.
    I have tried 4 different sets of 9700 Pro drivers, tried different versions of Direct X (8.1, 8.2, 9.0 RC0)
    Have disabled Fast Write and many other bios options.
    Have RMA'd for 2 different ATI cards, still getting
    The same problems.
    Tried all the bioses, cleared CMOS, re-partitoined, reformatted, reinstalled Windows more than 5 times.
    Tried beta AGP drivers aswell.
    Tried installing with minimal amounts of hardware to reduce
    Chance of conflict between 9700.
    Radeon 9700 Pro is on it's own IRQ.
    I have the latest revision of the Radeon 9700 pro now, rev 1.3
    I have a 430watt Enermax PSU. Here's the rest of my specs.
    MSI KT4V-L
    AMD Athlon Xp 1800+
    Maxtor 60GB ATA 133
    IBM 30GIG ATA 100
    LiteOn 38x#x#x
    512MB PC2100 DDR
    Audigy Gamer
    Crappy Modem.
    And so on.
    Grrr, this is all giving me a HUGE migrane.

    Ouch,
    I feel bad for you - I also have the same mobo and want to get a Radeon 9700 - I think I had seen you posting well on Rage3d with the same config, what happened?
    What I would try next is what some users have done as a possible workaround...It looks like the radeon 9700 on the MSI KT4 likes HIGH mobo fsb - so you might want to try unlocking your 1800 and run at 10.5x166 or lower multiplier with a 166fsb...
    before going 166fsb,  try right now to bump your fsb with fuzzy logic up to 140-150 and see if it changes anything and report - don't go to high passed 150 though if you don't have good air cooling - also, set at least 1.775 on the cpu vcore going after 140fsb...if this does not help, then you might want to try what I put above...
    Also, increase your PCI Latency to 64 in the bios (default is 32) - this is no risk really, so try that as well...
    **** Of course before overclocking with the fsb, turn off Spread Spectrum in the bios...
    If you increase the fsb, you will also need to increase DDR vcore to 2.6 am recommending...I've done that with my KT4VL and worse for different purposes...
    Also, you might want to increase agp voltage a bit and see if it changes anything...
    You're not done yet - looks like some users were able to run the same config so you never know...
    Be careful when you OC, if you're not sure - ask first and take your time
    Put your ram on SPD setting in the bios when you start bumping that fsb....
    If I can find the post, I will put it here but some KT4 user has to do this (increasing fsb) to get his 9700 to work great...
    Hope this helps,
    --fibo
    Also, go and post to the amdforums msi, as there are quite a few msi kt4vl users there...
    Also here is the post at rage3d with successful runs:
    Here

  • 655max: video CRASH with agp 8x RADEON 9700 pro

    Hi I own a 655max mobo and a radeon 9700 pro. I play games direct3d OK with agp 8x, but when I play Quake 3 Arena for about 15 to 30 min my video crash. I changed the agp 8x to 4x and everything works fine, but the framerate slow down seriously.
    My system:
    P4 2.6 @ 2.8
    1024 MB DDR400 samsung Memory
    WD 80 GB ATA100 7200 RPM
    Ati Radeon 9700 pro
    Sound Blaster Audigy 2
    Please help !

    ok i just tried to do that kaigon and the strangest thing happened, my system will not respond or start up with radeon in now... it will however if i leave the supplemental power plug off of the radeon, it starts, then gives me the error telling em to connect it, then when i connect it and hit power...nothing. pop in my old gf2 and fires right up, i dont understand this at all especially because the first time i turned my system on was with the radeon, with supplemental poower plugged in. i tried everything i could think of in the BIOS to straighten this out, but nothing, any more help would be awesome! thanks.

  • K7N2 Delta-ILSR - Radeon 9700 pro - no power.

    K7N2 Delta - ILSR (6570)
    AMD Athlon XP2800+ (Barton)
    nVidia GeForce III 64mb
    1GB Samsung PC3200 400MHz DDR Original  [2x512MB] [Checked nVidia site = Compatible]
    40gb + 80gb Hard Drives
    Sony DVD burner
    500wat psu   3.3 - 28 / 5 - 40 / 12 - 17
    3 extra fans
    2 Cathodes
    1 EL Cable
    Windows XP pro SP2. [all drivers and Bios are upto date]
    Everything works 100%
    Sapphire Radeon 9700 Pro... No fans, No lights No DVD and 1 Hard Drive.
    Power on... Continuous short BEEPS... Monitor comes on with the message "NO POWER CONNECTED TO RADEON"
    The Radeon mostly worked for over a year, [trouble booting cold] now it does'nt. [not with my MSI]
    The card works with my old board, LEX BN790E via KT266A, 512mb, AMD XP1700+ and all extras.
    I have been building my own P.C's for years. Starting with a 386sx, a huge 2mg of ram and Windows 3.11
    Everything is connected as it should be.

    Quote
    The Radeon mostly worked for over a year, [trouble booting cold] now it does'nt. [not with my MSI]
    The card works with my old board, LEX BN790E via KT266A, 512mb, AMD XP1700+ and all extras.
    that is suggesting to me either your PSU is failing, or it is a Poor PSU with over-optimistic amp ratings (eg Q-Tec). it will all appear to work fine on your older board, as that has lower power requirements, have a look in my sticky Is your problem caused by your PSU? for more info and advice.
    Quote
    Could people please read the entire post and NOT just the title.
    that was a bit rude. people try to help by asking questions and giving suggestions. making responses like that is more likely to make people ignore this topic. Please read and comply with the Forum Rules.

  • ATI Radeon 9800 PRO openGL Troubles

    Machine Name: Power Mac G4
    Machine Model: PowerMac3,5
    CPU Type: PowerPC 60? (1.1)
    Number Of CPUs: 1
    CPU Speed: 2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 1.25 GB
    Bus Speed: 133 MHz
    Display
    ATI Radeon 9800 Pro:
    Chipset Model: ATY,R350
    Type: Display
    Bus: AGP
    Slot: SLOT-1
    VRAM (Total): 128 MB
    Vendor: ATI (0x1002)
    Device ID: 0x4e48
    Revision ID: 0x0000
    ROM Revision: 113-A07525-130
    I have been looking for someone with the same or similar problem as mine to no avail
    Ok so heres my problem...a few months ago i noticed that the screen saver had frozen on my G4 mac
    At the time i didn't think anything of it so i try to reboot but it wouldn't get any further than the "Blue" screen after weeks of trouble shooting, reading through logs and surfing what felt like 90% of the net i tracked it down to the "ATI Radeon9700 Extensions" in my system folder.
    As you can see from above i have a "ATI Radeon 9800 PRO" and i presume that it runs off the 9700 drivers because there are no 9800 extenstions in the driver updates from ATI....
    Anyway this is the strange bit ....if i boot up in "Safe Mode" and delete all the "ATI Radeon9700 Extenstions" below
    ATIRadeon9700.kext
    ATIRadeon9700DVDDriver.bundle
    ATIRadeon9700GA.plugin
    ATIRadeon9700GLDriver.bundle
    ATIRadeon9700VADriver.bundle
    Then trash...
    Extensions.kextcache
    Extensions.mkext
    Then put a new copy of the "Radeon9700 Extensions" from the 10.4.8 upgrade back in, it boots fine.
    These extensions come with the apple OS updates so everytime i upgrade the OS i have to go through the above steps again.
    I am starting to think that the openGL capabilities of my card is fooked because the screensaver that im talking about is "Flurry" and it is really jerky now if i try to run it
    I know that the SS users openGL
    Also if i try and launch UT2k4 i get a crash log error of "unable to create pixel format.
    This is what the boot up log looks like before i trash the extensions
    13:03:04 localhost kernel[0]: 962:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 963:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 964:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 965:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 966:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 967:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 968:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 969:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 970:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 971:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 972:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 973:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 974:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 975:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 976:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 977:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 978:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 979:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 980:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 981:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 982:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 983:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 984:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 985:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 986:0xffffffff
    Dec 28 13:03:04 localhost kernel[0]: 987:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 988:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 989:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 990:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 991:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 992:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 993:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 994:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 995:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 996:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 997:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 998:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 999:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1000:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1001:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1002:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1003:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1004:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1005:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1006:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1007:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1008:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1009:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1010:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1011:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1012:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1013:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1014:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1015:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1016:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1017:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1018:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1019:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1020:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1021:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1022:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 1023:0xffffffff
    Dec 28 13:03:05 localhost kernel[0]: 0xaeba99b7
    Dec 28 13:03:05 localhost kernel[0]: ** ASIC Hang Log End **
    Dec 28 13:13:02 localhost kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x8401c100
    Dec 28 13:13:12 localhost kernel[0]: ** ASIC Hang Log Start **
    Dec 28 13:13:12 localhost kernel[0]: 0x01004e48 4f000207 00000007 20080178
    Dec 28 13:13:12 localhost kernel[0]: 0x13c280a4 c0003a0c 00000002 00000008
    Dec 28 13:13:12 localhost kernel[0]: 0x80000003 0000001f 00002a2a 8401c100
    Dec 28 13:13:12 localhost kernel[0]: 0x00000002 00100000 51b3a220 40000000
    Dec 28 13:13:12 localhost kernel[0]: 0x60000000 0002000a 0008bbbb 00000000
    Dec 28 13:13:12 localhost kernel[0]: 0x00000003 0000444f 10031004
    Dec 28 13:13:12 localhost kernel[0]: 0:0x000101ce
    There was a lot more of this but i dont want to spam the thread
    This is the interesting bit...
    " Dec 28 13:03:05 localhost kernel[0]: ** ASIC Hang Log End **
    Dec 28 13:13:02 localhost kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x8401c100"
    Any ideas ...please dont just say"Buy a new card" i would really like to get to the bottom of this...if it turns out that my card is fried then fair enough
    Quick silver 2002   Mac OS X (10.4.8)   processor upgrade to 2Ghz gigadesign 7A</

    I'm getting exactlly the same error. This occures after several weeks of sudden & spontaneous shutdowns. And now I get this error whenever I try to launch W.o.W.
    Feb 25 07:41:52 drive-0 kernel[0]: ** ASIC Hang Log End **
    Feb 25 07:41:53 drive-0 kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x80016100
    Feb 25 07:42:04 drive-0 kernel[0]: ** ASIC Hang Log Start **
    Now, my card is actually a 9800 Pro. I think it's something to do with OpenGL. I'm gonna try to launch other apps that access OpenGL directly and see what I get.

  • ATI Radeon 9600 Pro / 256MB + Leopard

    Hello i have problem to install correct my ATI Radeon 9600 Pro / 256MB. I Installed ATI Radeon 9600 Pro / 64 MB on my mac, because i could not install Logic Pro 8, and I Installed succesful. Install programm said by ATI Radeon 9600 Pro / 256MB that Quartz extreme are not supported, and I have 0 MB VRAM. That's not right. I Tried install update for ATi, after no display. I install Grafic update for OSX and the same. I was found that in system / Library / Extensions/ are ATI Radeon 9700.kext . When I delete this file i can run my Cinema 30'' display, but I cannot run Quartz Extreme. But this card are supported for Quartz extreme. When I put my old card
    ATI Radeon 9600 Pro 64MB - is supported for Quartz Extreme but my display Cinema 30'' can only 1280 x 800. What can I do ?
    Message was edited by: knoche

    Das Problem ist gefunden. Der Mac wurde 2003 gekauft, und wie viele von dieser Serie waren Motherboard fehlerhaft. Ich habe 2 davon. Die Motherboards waren dann 2004 ausgetauscht zu unterschiedlichen Zeiten. Der 1. in April andere November. Dann war alles scheintbar O.K.
    Erst jetzt haben wir gesehen durch den Austausch von Grafikkarten das etwas nicht stimmt.
    ES WAR MOTHERBOARD DIE FEHLERHAFT IST. In 2. G5 von 2003 geht die Karte einfach wunderbar. Ich hofe das Ich damit helfe den Tausenden da draussen die gleiche Problem haben vor allem in Apple forum, und keiner hat Lösung.
    Vielen Dank an die Firma Colormatch - die Jungs sind einfach Klasse Schlau.

  • ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac

    We want to be able to use our 30" cinema display from the G4 and was advised in a previous discussion to buy the ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac. It doesn't seem to be available anywhere. Does anybody know of an alternate video card that's currently available that will get us there? (We had the display running from a G5 that quit / logic board failure).
    Many thanks,
    Philip

    The Nvidia 7800GS is a flashed card, runs a 30" with ease.
    BruinMacs on Ebay is a great place to get one, you support the guy who wrote the original ROM for these.
    He doesn't seem to have any for sale right now, but if you email him, maybe he will list one.
    There are also flashed X800s that work on your MDD and can run a 30". They are pricey but will offer dual DVI while the 7800GS is single DVI with VGA for second display.
    There are also flashed 6600GT AGP cards which will work, but harder to find.
    Any of the above 3 will run circles around a 9600.

  • What is the correct installation sequence for my ATI Radeon 9800 PRO MAC AGP 128MB into my Quicksilver 867 G4?

    Hi.
    I just got my used ATI Radeon 9800 PRO MAC AGP 128MB card.
    What is the correct installation sequence into my Quicksilver 867 G4 running 10.4.11 on one drive 10.5 on another?
    The original NVIDIA GeForce2 MX - 32MB SDRAM went bust.
    Is the driver build in 10.4?
    Do I remove the old driver?
    If I need to install the driver that came with it, (10.3.6) should the card be installed first?
    What about firmware updates?
    Thank you for all your time and patience.
                                                                                        W.W.

    I think it's the card, but here are some files that may affect it...
    /Users/YourUserName/Library/Preferences/ByHost /com.apple.preference.displays.<12digitHex#>.plist
    /Library/Preferences/com.apple.windowserver.plist
    /Users/YourUserName/Library/Preferences/ByHost/com.apple.windowserver.<12digitHe x#>.plist
    /Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist

  • KT4 Ultra +Radeon 9700 Pro Trouble Free !

    After a few months of relatively trouble free gaming with KT4 Ultra and Radeon 9700 Pro, I was shocked to find recently that my PC began to crash after only a few minutes of gameplay.   8o
    Believing that a reinstall of all the relavent drivers would cure the problem, I set about trawling through the latest advice on what works / doesnt work. This I have to say was a minefield of anecdotes, mainly bad ones - as most of you guys are probably aware !
    After installing drivers as 'best' I could, the problem remained the same.
    It would appear that to ask for a complete list of recommended drivers is futile, since there is little correlation between reported 'fixes'. There is always someone reporting that the latest versions are causing problems.
    For the moment, this tale has a happy ending cos I found that the system is getting too hot (after some months !), so with the side panel off and a 12 inch desk fan blowing inside I managed a 4 hour session with now problems. )
    The purpose of the post is to highlight the disturbing fragility of these systems (which i'm sure many of you have first hand experince), both in hardware and software and to share my disbelief at the apparent lack of sustained testing that these boards undergo.
    Looks like a better cooling system is in order  

    It's unfortunate that most of the new hardware seems to pump out heat. The ATI 9700 pro use about 100W of power on it's own. The whole system puts out enough heat to warm a small room.
    I have noticed that the heatsink on the ATI card gets very hot, even though it has a fairly serious fan on it (the fan on my Sapphire card is a lot like a blue orb).
    I am wondering if a lot of problems with these setups are thermal. I have the KT4 Ultra and ATI 9700 pro and it has not given problems at all.
    I have (from past experience) installed plenty of cooling in my case (a full tower, that helps too). I find that the cooler everything as kept, the less problems there are.
    I think that at some stage in the near future there will have to be a change somewhere. Either in heat output (reduction in power use) or cooling.

  • OpenGL 2 drivers for ATI Radeon X600 Pro ?

    Help!
    I play Second Life, and their latest upgrade 1.14.0 which is about to become compulsory is expecting drivers for OpenGL 2, and this version definitely has big problems with the ATI Radeon X600 Pro video card in my iMac G5 iSight, and will make the game virtually unplayable, and mess up my inworld businesses there.
    Since this card is not listed on the ATI site, I guess we have to wait for Apple to update drivers. Are they going to soon, or do we have to wait for Leopard?
    I thought Leopard was first quarter, that leaves one day left lol.

    This is a fresh OS install on an external HD from my original 10.4.2 disks, and then Software Updated to 10.4.9. There are no outstanding software updates.
    From System Profiler:
    OpenGL:
    Version: 1.4.7
    Last Modified: 01/10/2005 05:13
    Get Info String: OpenGL 1.4.7.14.0
    And yet I have seen Core Duo Macs list OpenGL 2. Is there a problem with the Updater, or can a 14 month old iMac G5 with ATI Radeon X600 Pro not be updated to OpenGL 2?

  • KT3 Ultra with Radeon 9700 Pro

    KT3 Ultra with Enermax 350 W Whisper Quiet Power Supply will not boot up with new Radeon 9700 Pro video card, but it works fine with Radeon 7500. :(

    Quote
    Originally posted by Rob454
    Hi,
    What are your rails on your power supply.
    +12v, 3.3, and 5v.
    12 v = 17 A
    3.3 = 32 A
    5 v = 32 A
    3.3 & 5 = 185 W ?(
    Rob

  • Radeon 9700 pro problem with Far Cry game

     
    When I playing far cry at High Deatils, after 5 minutes game will crashing, and i got graphic error message
    I have Last update of official ati driver , and i tried OMEGA unofficial driver;
    but problem still running.
    Sys. Spcs.
    Mobo MSI 865 Neo 2 P
    CPU P4 3GHz HT
    RAM 4x256 dual channel
    Graphic Card Radeon 9700 pro 128MB/128Bit
    PSU 480 Watt.

    Game crashing could be caused by few problems, could be software or hardware. Assuming we're looking into hardware, I suggest you run MEMTEST for your RAM and see if your RAM is defected. Other than that, I can't think of any reason than power supply. But you stated you have a 480 W which should be sufficient. It could be a known problem with ATI on Far Cry? But if this's the case, ATI should be able to deal with it via Driver Update.
    If it's software, this is broad. Does Far Cry have any patch?

Maybe you are looking for

  • How do I get iPhone to sync with iPhoto immediately without plugging in?

    I'm running latest versions of IOS and OSX on iPhone 5 and Macbook.  I plug both phone and mac into power supply, open iPhoto and wait. Sometimes it will sync.  More often not.  I really want this to work over WiFi and not have to plug in.

  • My Intel iMac won't boot!!!

    I was recording a TV show with my Elgato EyeTV. It wasn't finished but I had to go out of the house so I just left it recording. When I came back my screensaver was stuck. Completely frozen. So of course I just decided to restart it. The Apple logo s

  • Limiting content length in POST

              Hi all,           We need to restrict the size of the resume uploaded           to say, 1 MB and we don't want the error message to come up after the upload is           completed. We tried to use Weblogic property maxPostSize=xxx but weblo

  • Quicktime movie w/ audio track from iTunes cannot convert to mpeg4

    Ok so i have a movie in Quicktime Pro 7 and i opened a track from iTunes and added it to my movie. Now, i cannot Export the movie into an Mpeg4. Why? This is really annoying and I've been trying to figure it out for a while. Any help would be really

  • Sudden increase in open file descriptors

    Our system is live since an year and half and for the first time I encountered the following exception "java.net.SocketException: Too many open files" When our internet application stopped responding I immediately checked the number of open file desc