ATI Radeon 9800 Driver
I bought a used Radeon 9800 pro (Mac) video card on ebay installed it and it seems to be running well.
However, I have read that I need to install drivers for it. I thought normally OSX took care of that for me... am I correct?
I have tried downloading from ATI and I am blocked from downloading at their site. I have looked at other download sites and they always point me back to ATI. So as of right now, I can not even find this driver to download if needed.
Can anyone give me some guidance.
Thanks
Hi-
OS X has the drivers that are needed for the ATI cards.
The only thing that you might want is the ATI Displays panel. Click on the download link, and be patient. A page or two may flash, but the download should start automatically.
The only driver update, The ATI RADEON Installer, contains the following items:
ATI RADEON9700.kext
ATI RADEON9700DVDDriver.bundle
ATI RADEON9700GA.plugin
ATI RADEON9700GLDriver.bundle
ATI RADEON9700VADriver.bundle
ATI RADEON8500.kext
ATI RADEON8500DVDDriver.bundle
ATI RADEON8500GA.plugin
ATI RADEON8500GLDriver.bundle
ATI RADEON.kext
ATI RADEONDVDDriver.bundle
ATI RADEONGA.plugin
ATI RADEONGLDriver.bundle
ATI ROM Xtender
In Mac OS X/System/Library/Extensions, you should already have the above listed drivers.
Similar Messages
-
Can't install driver for my ATI Radeon 9800 XT VGA card!
Hello:
I own a computer with these specs:
Operating System Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
Computer:
Computer Type ACPI Uniprocessor PC
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
Internet Explorer 7.0.5730.11 (IE 7.0)
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2400 MHz (18 x 133)
Motherboard Name MSI 845E Max (MS-6566E) (6 PCI, 1 AGP, 1 CNR, 2 DDR DIMM)
Motherboard Chipset Intel Brookdale i845E
System Memory 512 MB (PC2100 DDR SDRAM)
DIMM1 256 MB PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
DIMM2 256 MB PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
BIOS Type AMI (09/13/04)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter RADEON 9800 XT - Secondary (256 MB)
Video Adapter RADEON 9800 XT - Secondary (256 MB)
3D Accelerator ATI Radeon 9800 XT (R360)
Monitor LG F900B [19" CRT] (121137790)
Multimedia:
Audio Adapter Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [A-1]
Storage:
IDE Controller Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
Floppy Drive Floppy disk drive
Disk Drive IC35L060AVV207-0 (60 GB, 7200 RPM, Ultra-ATA/100)
Optical Drive SAMSUNG CD-R/RW SW-252S (52x/32x/52x CD-RW)
Optical Drive TEAC DVD+RW DV-W58E (DVD:8x/4x/12x, CD:32x/16x/40x DVD+RW)
SMART Hard Disks Status OK
I just replaced my old graphics card NVIDIA GeForce2 MX/MX 400 with another old model card, ATI Radeon 9800 XT. Everything was fine until I tried to update a recent ATI driver after uninstalling my old Nvidia driver with DriverCleaner Pro. I get this error message:
"Setup failed to launch installation engine: Class not registered"
Then, tried to install the driver through device manager with the update driver option. I directed to the driver folder on my desktop and the driver update went through, smoothly. However, when I put my computer in standby mode and then restore to full operation
I got a BSOD with this error msg.:
ati2dvag.dll-Address BF039614 base at BF012000, DateStamp 49344e53
Now I can't use standby mode because the computer just shuts down instead of operating in standby.
Is there any idea why my new card is not being fully accepted in my OS and how can I fix this issue. BTW, my ATI card is an 8x speed and my AGP slot supports a max of 4x speed, but I think my card is reverse compatible with 4x slot with the same voltage (1.5V).Thank you BOSS for your quick response:
I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
Thanks in advance!!! -
Zen Kernel and new ati radeon oss driver
Hey together!
A few days ago I get new ati-driver from testing and since then, I can't start the xserver with the zen kernel and ums. I can use the normal kernel 2.6.33 normally.
Here is my Xorg log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux linux-laptop 2.6.33-ZEN #1 ZEN SMP PREEMPT Fri Mar 5 13:29:19 CET 2010 i686
Kernel command line: root=/dev/disk/by-uuid/5394d0b7-4952-4f87-87bc-a4762f73b8c4 ro quiet
Build Date: 18 March 2010 07:32:34PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:12:54 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:5653:144d:e003 ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0xd0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] drm report modesetting isn't supported.
(WW) Falling back to old probe method for vesa
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X700 (M26) (PCIE)" (ChipID = 0x5653)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x144d SubsystemID: 0x5653
IOBaseAddress: 0x3000
Filename:
BIOS Bootup Message:
M26-P Samsung M26 Firenze ATOMBIOS BR14537/rel9.10.1.0/CL199610
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 358000
(II) RADEON(0): Default Memory Clock: 345000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 500000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 200000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.32.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=7 min=20000 max=50000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 21, HSyncWidth: 32
VBlank: 16, VOverPlus: 4, VSyncWidth: 4
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): TMDS PLL from BIOS: 16500 b0112
(II) RADEON(0): Skipping Component Video
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVDS
DDC reg: 0x1a808
(II) RADEON(0): Port2:
XRANDR name: DVI-0
Connector: DVI-D
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x809f7db]
1: /usr/bin/X (0x8048000+0x54715) [0x809c715]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0x7785e40c]
3: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x83208) [0x772a9208]
4: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3790c) [0x7725d90c]
5: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3988b) [0x7725f88b]
6: /usr/bin/X (InitOutput+0x5c8) [0x80ab048]
7: /usr/bin/X (0x8048000+0x1a550) [0x8062550]
8: /lib/libc.so.6 (__libc_start_main+0xe6) [0x7747db86]
9: /usr/bin/X (0x8048000+0x1a2f1) [0x80622f1]
Segmentation fault at address 0x7734f808
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Can anyone help me? Thanks!When I install an old xf86-video-ati package from 27.02.2010, everything works. So the problem seems to be the new ati-driver.
-
ATI/Radeon 9800 Pro 128 AGP 4x/2x in Gigabit Ethernet dual 450 PMac G4
Hi,
This is my first time posting to these discussion group... I've been going through related threads and have not found an answer to my problem...
I have a Gigabit Ethernet dual 450 G4. Awhile ago I upgraded the processor to a Sonnet 1.8ghz so I could run Leopard.
I just bough the ATI/Radeon 9800 Pro 128 AGP 4x/2x video card. I researched around and that seemed to be a card that would work in my machine. I even read a review on Amazon where someone had also upgraded to the 1.8 processor used this card with no issues.
I do have an older monitor - Apple Studio Display CRT with the ADC connector. So I also bought the Apple DVI to ADC adapter kit.
I installed the card and do not get any picture at all - I believe I have installed everything correctly. I'm pretty sure I can hear the fan on the video card in the machine. The monitor is getting power from the adapter since the button lights up when I press it - but it does not stay lit -- the monitor never turns on. Using my old graphics card the monitor makes a little "beep" when it turns on.
In reading the other topics I am wondering if it might be a power issue? According to Other World Computing's profile my machine has a max of 220 watts. Although they suggest this video card as one the will work in my machine.
I have disabled the hard drive that came with the machine (too small) and am using two Maxtor hard drives that I added - one ATA (120gb) and one SATA (500gb) that is connected to an SATA pci card. I also have two additional pci cards with usb 2.0/firewire ports.
In looking at the topics here I came across the link about taping the 3 and 11 pins on the video card. Even though the card I have is 4x/2x not 8x I thought I'd give it a shot. That did not work either.
Any help you can give would be greatly appreciated.I don't wish to sound redundant here, but I've been reviewing the vendor's page:
It's OK- I don't mind beating this dead horse....
The maker says such to protect themselves from possible claims that may arise due to over loaded systems and power problems when their card is installed in said system.
Of course, 300w would be nice, but they didn't even specify the PSU rating a couple years ago. The Sawtooth, with it's 237w PSU, used to be listed as a compatible machine for the 9800...... They just didn't consider how far a Sawtooth might be modded.
Within reason, the early G4's (Sawtooths) are capable of using the Radeon 9800 Pro. The GE has the same 338w PSU as the DA (they are interchangeable), so there is plenty of power for the 9800.
One thing to remember, the requirements of the ADC port of the AGP slot are removed by using a non ADC card. This really changes the calculations of the power available.
It's kinda' a long post, but, if you care to get ALL the details, check the following:
http://discussions.apple.com/thread.jspa?messageID=7065653�
I think you'll be satisfied with the explanation.......
Which leaves your second, and very appropriate, point.
The main enemy of all, though, isn't power. Heat is the biggest concern.
Reducing heat/increasing cooling by using a third party fan on the 9800 is highly recommended. The 9800 is a hot card, and the stock fan is prone to early failure.
Adding additional cooling to remove the extra heat produced by the 9800, by using an exausting PCI fan, will also help the PSU provide adequate voltage to the system, by reducing the amount of hot air moving out of the PSU.
Super heated air moving through the PSU reduces the cooling ability of the PSU. A hot PSU doesn't produce reliable power.
So, add the 9800, add some cooling, and enjoy! -
[Athlon64] MSI K8T NEO-V : incompatibility with ATI RADEON 9800 PRO
Hi,
I read all the subjets on this forum about Radeon problems with MSI K8T NEO motherboard. Most of the peple can't use their graphic card in all situations.
My PC is :
-MSI K8T NEO-V
-AMD-64 3200
-Power : 400W
-ATI RADEON 9800 PRO
-1 Go DDRAM (2x512 in single channel)
-Hercules Digifires 7.1
I bought a new MSI K8T NEO-V with AMD 64.
The problem is that I can't use the computer in the games with AGP 8X even if I try to enable-disable all the options possibles in BIOS and Windows (fast write ...) : The computer freeze (screen disapear as if there was no video signal), reboot or return to Windows disabling the accelerated mode.
But in AGP 4X, all the game run without problem with all setups of BIOS !!!
I tried all the drivers (the new and the old drivers). Even if all are updated, it freeze.
There are no BIOS update for my motherboard. I saw that some people had BIOS update for compatibility with some Radeon cards ...
So, I don't know how to repair the problem because AGP 8X is AGP 8X and not 4X, and my Radeon run fine on other computer, and nothing say that Radeon 9800 pro don't run on this motherboard.
Does someone have the solution to make it work ? Does a new BIOS or driver update exist somewhere for Radeon cards ?What Bas said about 30+ amps on the 12v rail does have merit. Even if you don't use it now there may come a time when you want to upgrade the system and certainly you won't want to buy yet another PSU then. A High end vid card now takes almost as much as the CPU to operate. Now days the 12v rail is the most important. Past systems regulated everything off the 5v railk and 12v was used mostly for powering drive motors. Now though the MB's use the 12v line to regulate all the voltages for the CPU, Chipset and other features as does the Vid cards. 3.3 volt lines are used for memory so we hardly use any 5v nowdays.
You have an older viod card and that does not eat much 12v but if you upgrade the most likely peice will be the vid card. You could go through this whole thing all over again if you are not careful to plan for that now with a new PSU purchase.
If the computer shop gives you a bunch of bull about power needs havbe them stop by the forum and we can help set them straight on this. There is more than enough data from MSI and historical data here that suggests that 16a on the 12v rail is certainly not enough. Hey I am not trying to sell you anything. I am just trying to help you get it right. The computer shop is the one trying to sell you something we just feel they are selling the wrong junk. -
ATI Radeon 9800 PRO openGL Troubles
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC 60? (1.1)
Number Of CPUs: 1
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 133 MHz
Display
ATI Radeon 9800 Pro:
Chipset Model: ATY,R350
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4e48
Revision ID: 0x0000
ROM Revision: 113-A07525-130
I have been looking for someone with the same or similar problem as mine to no avail
Ok so heres my problem...a few months ago i noticed that the screen saver had frozen on my G4 mac
At the time i didn't think anything of it so i try to reboot but it wouldn't get any further than the "Blue" screen after weeks of trouble shooting, reading through logs and surfing what felt like 90% of the net i tracked it down to the "ATI Radeon9700 Extensions" in my system folder.
As you can see from above i have a "ATI Radeon 9800 PRO" and i presume that it runs off the 9700 drivers because there are no 9800 extenstions in the driver updates from ATI....
Anyway this is the strange bit ....if i boot up in "Safe Mode" and delete all the "ATI Radeon9700 Extenstions" below
ATIRadeon9700.kext
ATIRadeon9700DVDDriver.bundle
ATIRadeon9700GA.plugin
ATIRadeon9700GLDriver.bundle
ATIRadeon9700VADriver.bundle
Then trash...
Extensions.kextcache
Extensions.mkext
Then put a new copy of the "Radeon9700 Extensions" from the 10.4.8 upgrade back in, it boots fine.
These extensions come with the apple OS updates so everytime i upgrade the OS i have to go through the above steps again.
I am starting to think that the openGL capabilities of my card is fooked because the screensaver that im talking about is "Flurry" and it is really jerky now if i try to run it
I know that the SS users openGL
Also if i try and launch UT2k4 i get a crash log error of "unable to create pixel format.
This is what the boot up log looks like before i trash the extensions
13:03:04 localhost kernel[0]: 962:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 963:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 964:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 965:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 966:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 967:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 968:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 969:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 970:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 971:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 972:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 973:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 974:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 975:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 976:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 977:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 978:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 979:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 980:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 981:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 982:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 983:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 984:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 985:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 986:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 987:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 988:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 989:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 990:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 991:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 992:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 993:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 994:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 995:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 996:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 997:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 998:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 999:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1000:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1001:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1002:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1003:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1004:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1005:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1006:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1007:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1008:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1009:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1010:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1011:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1012:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1013:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1014:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1015:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1016:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1017:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1018:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1019:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1020:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1021:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1022:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1023:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 0xaeba99b7
Dec 28 13:03:05 localhost kernel[0]: ** ASIC Hang Log End **
Dec 28 13:13:02 localhost kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x8401c100
Dec 28 13:13:12 localhost kernel[0]: ** ASIC Hang Log Start **
Dec 28 13:13:12 localhost kernel[0]: 0x01004e48 4f000207 00000007 20080178
Dec 28 13:13:12 localhost kernel[0]: 0x13c280a4 c0003a0c 00000002 00000008
Dec 28 13:13:12 localhost kernel[0]: 0x80000003 0000001f 00002a2a 8401c100
Dec 28 13:13:12 localhost kernel[0]: 0x00000002 00100000 51b3a220 40000000
Dec 28 13:13:12 localhost kernel[0]: 0x60000000 0002000a 0008bbbb 00000000
Dec 28 13:13:12 localhost kernel[0]: 0x00000003 0000444f 10031004
Dec 28 13:13:12 localhost kernel[0]: 0:0x000101ce
There was a lot more of this but i dont want to spam the thread
This is the interesting bit...
" Dec 28 13:03:05 localhost kernel[0]: ** ASIC Hang Log End **
Dec 28 13:13:02 localhost kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x8401c100"
Any ideas ...please dont just say"Buy a new card" i would really like to get to the bottom of this...if it turns out that my card is fried then fair enough
Quick silver 2002 Mac OS X (10.4.8) processor upgrade to 2Ghz gigadesign 7A</I'm getting exactlly the same error. This occures after several weeks of sudden & spontaneous shutdowns. And now I get this error whenever I try to launch W.o.W.
Feb 25 07:41:52 drive-0 kernel[0]: ** ASIC Hang Log End **
Feb 25 07:41:53 drive-0 kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x80016100
Feb 25 07:42:04 drive-0 kernel[0]: ** ASIC Hang Log Start **
Now, my card is actually a 9800 Pro. I think it's something to do with OpenGL. I'm gonna try to launch other apps that access OpenGL directly and see what I get. -
ATI Radeon 9800 Pro screen issue Powermac G4 MDD?
So I bought a new ATI Radeon 9800 Pro 256MB and it seems to work fine, but when I restart I get this screen:
http://s79.photobucket.com/albums/j149/ralphiedee/?action=view¤t=monitor2. jpg
But only when I restart it seems. Please any help would be appreciated.
I have dual 1Ghz processors
2 gigs of ram
plenty of hard drive space.Hi Quarrypoint, and a warm welcome to the forums!
Hmmmm, doesn't look good, One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, does it do that in Safe Mode ever...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below.
I'm not certain what temps are reported on your G4, but Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.
Does it do that if it's cooled off on restart? -
Hi,
I am trying to help a friend whose graphics card has bust.
The old one was an ATI RADEON 9800 PRO-(256MB)-MAC EDITION.
I've been looking on ebay and it seems a lot cheaper to get a Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5.
Can I just swap them over? The connectors are not identical according to the photographs.
Thanks.I'd like to thank everyone for all the really useful information in this thread. It helped me solve a similar problem, which I'll describe here briefly in case it helps someone else.
I have a 2004/5 dual 2 Ghz PowerPC G5 and an Apple Cinema HD display linked, as I later found out, with the now defunct ADC connector. The display suddenly started to look like that scene in The Matrix, when code falls like rain down the screen, and I worked out I needed to replace my Radeon 9800 pro video card (I discovered the board was blue when I removed a thick layer of dust).
I took japamac's excellent advice and bought a Geforce 6800 Ultra from the linked eBay seller in Hong Kong, who delivered it extremely quickly, along with the cables to plug it into the DVD drive power source and a CD with installation instructions. It was only then that I realised the card had two DVI connectors and my display needed ADC (I hadn't understood the difference).
eBay came to the rescue again with a seller who had a secondhand DVI to ADC adapter, which Apple produced when it phased out ADC about six years ago but no longer sells. It has its own power supply and looks like a large version of the Mac laptop power cables - and has added signifcantly to the pile of spaghetti under my desk.
Installing the Geforce 6800 Ultra is fiddly, and a bit scary if you're not used to delving into the insides of a Mac, but the instructions were clear and illustrated with useful photos. The video cable has four connectors. Two fit into the end of the card, the other two (linked in a Y shape) form a bridge between the DVD/superdrive and its power cable. You have to remove the DVD drive, unplug it, and then plug one of the two Y video card connectors into the DVD power cable and the other into the DVD drive itself. Then you replace the DVD drive, plug the two remaining cable connectors to the video card and ease it into the old card's AGP slot.
Finally, with the G5 reassembled, plug the adapter's DVI connection into the back of the card, plug the Cinema Display ADC cable into the adapter block, plug the adapter's USB cable into the G5 (this enables the the USB ports on the back of the display to work), and power up.
At the time of writing, the display has been up and running for a couple of hours and all seems fine.
Thanks again everyone for all your help and advice. If it wasn't for communities like this, it would be virtually impossible to solve problems with old but still serviceable Macs. -
The Tech Specs for the 20" ACD indicate that the supported resolutions are 1680 x 1050, 1280 x 800, and 1024 x 640. None of these resolutions are supported by the ATI Radeon 9800 according to the Mac User Guide from ATI's web site. Do I have to get a 23" ACD if I get this card? (1920x1200 is in the supported list for the 9800). Or can I drive the 20" ACD at 1600x1024 (which is also in the supported list for the 9800)?
As Malcolm said, the 9800 WILL support the 20" Apple Cinema Display at native resolution (1680 x 1050).
The native resolution of the 20" is within the MAX. digital resolution of 1920 x 1200 supported by the 9800.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan -
MDD upgrade conflict with ATI Radeon 9800
does anyone out there have my specs; Sonnettech MDX Dual 1.6gh processor with ATI Radeon 9800 Pro VGA card? After installing the processor, i now get weird lines all over the screen at bootup and then i get a bunch of green speckles all over my desktop after the computer boots. i can work on my computer, but the screen images, speckles and other artifacts are annoying. i have dropped the hz to 66 and the screen resolution to 800x600 because higher resolutions would cause the computer to freeze. does anyone have any catalyst settings or ATI display panel suggestions ? i wish i could attach the pictures i took of the display.
Dual Power Mac G4 867 & Macbook Pro 2gig Mac OS X (10.4.9) FCP Studio 5.1.2Well, i tried your idea, bought the iceberq5, installed it with ease and things just got worse. 1st, my MDD Dual 867 mac's AGP slot is right next to my fourth RAM slot. So with the Iceberq5 installed, i had to lose 512mb of RAM. it just wont fit. the new cooler cover the RAM slot. so instead of 2gigs of RAM, i'm down to 1.5. 2nd, with the icebeq5 on the ATI card, the door will not close. the iceberq runs into the case holding my DVD drives. After booting the computer up with the case open, the screen still loaded with the screen defects. I'm thinking I have a bad card, yet it worked when the Sonnettech dual processor upgrade was not installed. these weird color lines only occur with the sonnettech md/1.6 dual upgrade and the ATI 9800 Pro installed. I then used TechTool pro to scan and check my AGP card VRAM and it gave me an error. So here is my question, is there another powerful AGP card out there for my mac dual 867 that has a powerful fan on it that is also small enough to allow my case to close and for me to have all my RAM installed ? Thanks
-
Hi.
I just got my used ATI Radeon 9800 PRO MAC AGP 128MB card.
What is the correct installation sequence into my Quicksilver 867 G4 running 10.4.11 on one drive 10.5 on another?
The original NVIDIA GeForce2 MX - 32MB SDRAM went bust.
Is the driver build in 10.4?
Do I remove the old driver?
If I need to install the driver that came with it, (10.3.6) should the card be installed first?
What about firmware updates?
Thank you for all your time and patience.
W.W.I think it's the card, but here are some files that may affect it...
/Users/YourUserName/Library/Preferences/ByHost /com.apple.preference.displays.<12digitHex#>.plist
/Library/Preferences/com.apple.windowserver.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.windowserver.<12digitHe x#>.plist
/Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist -
Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc? -
"Display ATI Radeon Family driver stopped responding and has recovered"
For the past few days my laptop Model HP G61-409CA has been displaying broken black and white horizontal lines and black, white, and coloured random squares on my screen. When it freezes the screen and mouse stops moving and the screen goes blank for about 5 seconds then comes back with the error (Display ATI Radeon Family driver stopped responding and has recovered) appears with a yellow triangle. Unfortunetly when i click on the triangle nothing opens up.
Ive tried to download Catalyst Control Centre because when I researched many people spoke about not being able to find their control centre and that it had something to do with the displaying error on the screen. I cant seem to find the folder or the program on my computer, but when i tried to install something similar from http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064#amd-catalyst-packages less than half way through the computer displayed a Blue screen and had to shut down. Also when i recovered my laptop the problem did not go away.
My product number : WA964UA#ABC
OS: Windows 7 for x64 based systems
Please let me know what needs to be done ive tried updating all my drivers aswell!Hi Quesspee,
Thank you for your query, I am happy to assist you!
I grasp that a few days ago your display started showing broken black and white horizontal lines and black, white, and coloured random squares on your screen . When it freezes the screen and mouse stops moving and the screen goes blank for about 5 seconds then comes back with the error (Display ATI Radeon Family driver stopped responding and has recovered) appears with a yellow triangle. When you clicked on the triangle, nothing happened.
You tried installing the Catalyst Control Center and approximately 1/2 through, you received a blue screen and your system shut down.
You tried doing a recovery but the issue remained.
I suggest you test for hardware failures. Testing for Hardware Failures (Windows 7)
If this did not help to locate the issue, I suggest contacting HP support for further assistance. They have the ability to remotely log onto your system, to help locate and resolve issues.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
S-Video not working on ATI Radeon 9800 Pro????
I've had this ATI Radeon 9800 Pro in my MDD dual 1.25 G4 for a little while with two VGA monitors. I recently got rid of the secondary monitor and moved a 27" flat screen tube TV next to the computer. As I always do, I've got to start tinkering. I remembered that my Radeon has both VGA, DVI, and an S-Video outputs. I simply ran an S-Video from the card to the TV. I can't seem to get it to work. I had never used the ATI control panels so I went ahead and downloaded and installed it. It won't "detect" the TV in the Mac2TV control. What the heck am I doing wrong???? I emailed ATI and they just sent me a form reply to a dead link saying that my system is unstable. UGH!
Any tips would be great.
Thanks much,
RobertWell, I figured out that if I reboot and only have the s-video attached and no monitors to the VGA or DVI it will work. It dedicates the TV as the primary screen. However, not the best picture. I can't find any information if both the s-video and VGA or DVI can operate at the same time. I'm also doing a little more research with ATI to see if they actually have a true component output from either the VGA or DVI. I had bought a DVI to what I thought was supposed to be component but it was actually RGB component and just gave a distorted image. If I can get that to work, I think it would be a better image along with being able to run both the monitor and the TV as the secondary.
Robert -
Having trouble with my G4 MDD 867MHz DP and ATi Radeon 9800 Pro video card.
I just recently purchased the ATi Radeon 9800 Pro Mac edition card on ebay. I installed the card on my G4 and turned it on thinking everything would work with no problems, but when I turned it on the grey apple screen came up fine and then it changed to a sky-blue screen with nothing on it and remained on that screen. My desktop or any of my apps did not load up at all. I reset the PRAM and the NVRAM as the seller I bought the card from instructed me to and still I get the same result. Is anyone familiar with this problem? I was wondering if my monitor was the problem because I'm using a Dell LCD monitor as the display for right now? I need help! I'm trying to get this up and running so I can start editing. Whatever information anyone can give me will be greatly appreciated!
Sometimes display cards that support multiple displays (or a second display card in the same Mac) can cause the display you are using to be the SECOND display in a multiple-display "extended desktop".
When this happens, the MenuBar and cursor may be drawn perfectly, but be on the "other" screen, and it is very difficult to determine what has happened. \[This problem is sometimes caused by inadvertently leaving an adapter or cable on an unused display port.]
Try moving the mouse many times to the right to see if the cursor suddenly transitions onto your screen, then try the same experiment to the left.
Maybe you are looking for
-
Profit Center is not deriving in Asset acquisation through PO & Direct Acqu
Hi I have a issue in asset accounting, kindly help me if u know.... We are using document splitting functionality with profit center mandatory for any kind of posting. Scenario-Asset purchase through PO: 1.Purchase Order -created 2.At goods receipt e
-
After 6 years my wireless mouse died, and I purchased a new "magic mouse." The instructions and the salesperson both said I could use it to scroll by rubbing my finger on its back. I do not get this result. I just am able to click the left side to cl
-
I'm thinking of upgrading from v10.6.8 Snow Leopard to OS X Yosemite. I know, I'm years behind, but it has become a necessity. My Mac is becoming slow and is incompatible with many softwares and websites. Does anyone know of any problems associated w
-
ADRMAS is sent to two partner systems
Hello, We created a custom made message type for DEBMAS: Z_DEBMAS. When we send a customer using transaction BD12 an ADRMAS message should be send to one partner system but it also sends an ADRMAS message to a total different system (where we send ot
-
Hi everyone, I was wondering if anyone could please help me out with this issue I'm having. I have this type with a single point perspective on it and I wanted to add motion to the perspective. In other words, I want the perspective point to move aro