Ati Radeon no HDMI output
Hi,
I'm on a hybrid-graphics Intel/Ati HP dv6 and I'm trying to connect the HDMI video output to my LED TV, but xrandr doesn't recognize that video output.
$ xrandr --prop ~
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
EDID:
00ffffffffffff004ca3514200000000
00120103802213780a87f594574f8c27
27505400000001010101010101010101
010101010101121b567250000c303020
250058c2100000190000000f00000000
00000000001eb4027400000000fe0053
414d53554e470a2020202020000000fe
00313536415430352d4830370a200003
BACKLIGHT: 5 (0x00000005) range: (0,10)
Backlight: 5 (0x00000005) range: (0,10)
scaling mode: Full aspect
supported: None Full Center Full aspect
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
1368x768_60.00 (0xc4) 85.2MHz
h: width 1368 start 1440 end 1576 total 1784 skew 0 clock 47.8KHz
v: height 768 start 771 end 781 total 798 clock 59.9Hz
$ lspci -vnnn | perl -lne 'print if /^\d+\:.+(\[\S+\:\S+\])/' | grep VGA ~
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] [1002:68c1] (rev ff) (prog-if ff)
$ pacman -Q | grep '^ati' ~
ati-dri 9.0-1
here is the Xorg log https://gist.github.com/4095083
any hint?
I've already tried to boot with TV on and connected.. it doesn't help
bye
On Xubuntu 13.04 HDMI output works fine. This is 'dmesg | grep vga' from Xubuntu:
[ 6.713480] [drm] Initialized drm 1.1.0 20060810
[ 6.754710] [drm] radeon defaulting to kernel modesetting.
[ 6.754715] [drm] radeon kernel modesetting enabled.
[ 6.801983] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.801984] [drm] Driver supports precise vblank timestamp query.
[ 6.990890] fbcon: inteldrmfb (fb0) is primary device
[ 7.770324] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.779740] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.779901] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x17AA:0x3951).
[ 7.779939] [drm] register mmio base: 0xF8800000
[ 7.779940] [drm] register mmio size: 131072
[ 8.188157] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 8.188162] [drm] RAM width 128bits DDR
[ 8.188379] [drm] radeon: 1024M of VRAM memory ready
[ 8.188382] [drm] radeon: 512M of GTT memory ready.
[ 8.188412] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.188415] [drm] Driver supports precise vblank timestamp query.
[ 8.188567] [drm] radeon: irq initialized.
[ 8.188575] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 8.189671] [drm] probing gen 2 caps for device 8086:45 = 1/0
[ 8.189751] [drm] Loading REDWOOD Microcode
[ 8.191961] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 8.209328] [drm] ring test on 0 succeeded in 1 usecs
[ 8.209393] [drm] ring test on 3 succeeded in 1 usecs
[ 8.209863] [drm] ib test on ring 0 succeeded in 0 usecs
[ 8.209910] [drm] ib test on ring 3 succeeded in 0 usecs
[ 8.264215] [drm] radeon atom DIG backlight initialized
[ 8.264220] [drm] Radeon Display Connectors
[ 8.264222] [drm] Connector 0:
[ 8.264225] [drm] LVDS-2
[ 8.264228] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 8.264229] [drm] Encoders:
[ 8.264231] [drm] LCD1: INTERNAL_UNIPHY
[ 8.264233] [drm] Connector 1:
[ 8.264235] [drm] HDMI-A-1
[ 8.264236] [drm] HPD1
[ 8.264239] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 8.264240] [drm] Encoders:
[ 8.264242] [drm] DFP1: INTERNAL_UNIPHY1
[ 8.264243] [drm] Connector 2:
[ 8.264245] [drm] VGA-2
[ 8.264248] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 8.264249] [drm] Encoders:
[ 8.264251] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 8.280383] [drm] Internal thermal controller with fan control
[ 8.280441] [drm] radeon: power management initialized
[ 8.306987] [drm] fb mappable at 0xC0142000
[ 8.306992] [drm] vram apper at 0xC0000000
[ 8.306995] [drm] size 4325376
[ 8.306998] [drm] fb depth is 24
[ 8.307001] [drm] pitch is 5632
[ 8.307222] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[ 8.307245] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 1
[ 84.656646] Modules linked in: snd_hda_codec_hdmi iwlwifi coretemp snd_hda_codec_realtek joydev(F) snd_hda_intel(+) kvm_intel snd_hda_codec cfg80211 snd_seq_midi(F) snd_seq_midi_event(F) kvm jmb38x_ms snd_rawmidi(F) uvcvideo lpc_ich snd_seq(F) snd_hwdep(F) snd_pcm(F) bnep intel_ips ideapad_laptop videobuf2_vmalloc videobuf2_memops videobuf2_core memstick psmouse(F) snd_seq_device(F) snd_page_alloc(F) serio_raw(F) videodev snd_timer(F) snd(F) soundcore(F) parport_pc(F) rfcomm mei ppdev(F) bluetooth lp(F) sparse_keymap microcode(F) mac_hid parport(F) dm_multipath(F) scsi_dh(F) squashfs(F) overlayfs(F) nls_utf8 isofs(F) dm_raid45 xor(F) dm_mirror(F) dm_region_hash(F) dm_log(F) hid_generic usbhid hid tg3 ahci(F) libahci(F) ptp pps_core radeon i915 video(F) i2c_algo_bit ttm wmi drm_kms_helper drm sdhci_pci sdhci
And this is from Arch:
[ 7.449775] [drm] Initialized drm 1.1.0 20060810
[ 7.783307] [drm] radeon kernel modesetting enabled.
[ 7.783653] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x17AA:0x3951).
[ 7.783689] [drm] register mmio base: 0xF8800000
[ 7.783690] [drm] register mmio size: 131072
[ 8.089499] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 8.089504] [drm] RAM width 128bits DDR
[ 8.089607] [drm] radeon: 1024M of VRAM memory ready
[ 8.089609] [drm] radeon: 512M of GTT memory ready.
[ 8.089628] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.089629] [drm] Driver supports precise vblank timestamp query.
[ 8.089727] [drm] radeon: irq initialized.
[ 8.089731] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 8.090349] [drm] probing gen 2 caps for device 8086:45 = 2212d01/0
[ 8.090411] [drm] Loading REDWOOD Microcode
[ 8.316016] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 8.333172] [drm] ring test on 0 succeeded in 1 usecs
[ 8.333232] [drm] ring test on 3 succeeded in 1 usecs
[ 8.333618] [drm] ib test on ring 0 succeeded in 0 usecs
[ 8.333665] [drm] ib test on ring 3 succeeded in 0 usecs
[ 8.387040] [drm] radeon atom DIG backlight initialized
[ 8.387050] [drm] Radeon Display Connectors
[ 8.387055] [drm] Connector 0:
[ 8.387059] [drm] LVDS-1
[ 8.387066] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 8.387070] [drm] Encoders:
[ 8.387073] [drm] LCD1: INTERNAL_UNIPHY
[ 8.387076] [drm] Connector 1:
[ 8.387079] [drm] HDMI-A-1
[ 8.387081] [drm] HPD1
[ 8.387085] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 8.387087] [drm] Encoders:
[ 8.387090] [drm] DFP1: INTERNAL_UNIPHY1
[ 8.387092] [drm] Connector 2:
[ 8.387095] [drm] VGA-1
[ 8.387099] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 8.387101] [drm] Encoders:
[ 8.387104] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 8.400637] [drm] Internal thermal controller with fan control
[ 8.400694] [drm] radeon: power management initialized
[ 8.423209] [drm] fb mappable at 0xC0142000
[ 8.423214] [drm] vram apper at 0xC0000000
[ 8.423215] [drm] size 4325376
[ 8.423217] [drm] fb depth is 24
[ 8.423219] [drm] pitch is 5632
[ 8.423335] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[ 8.423358] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:00.0 on minor 0
[ 8.423701] [drm] Memory usable by graphics device = 2048M
[ 8.423708] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 8.475440] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.475441] [drm] Driver supports precise vblank timestamp query.
[ 8.511806] fbcon: inteldrmfb (fb0) is primary device
[ 9.304232] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.314084] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
Any ideas?
Last edited by fripuc (2013-06-01 18:01:47)
Similar Messages
-
Problem renting HD movies on PC (hp I7/8gb/ATI radeon 5650/HDMI) - meet all of the criteria yet store will not let me rent HD movies, any ideas on how to do this?
ahhhh more fun, 3 windows updates are now causing a no boot, Black screen. Everytime i must do a system restore and i see the logs of the updates, anyone know what the cause of this problem is?
-
Mac Pro Radeon X1900 HDMI output no signal
Actually I am not sure which category I should put this question, but hope guys you don't mind and help me.
I have a mac Pro 4-core with Radeon X1900.
I use BootCamp and running WindowsXP SP3
I bought a DVI to HDMI converter and connect to my Samgsung 40" LCD TV
there is no signal output even I tried all kinds of output setting.
I also try using MacOSX, still doesnot work
Pls help.
ThanksReset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next call Apple. Yo have 90 days of free telephone support
Complimentary Support (USA)
You can also
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
ATI Radeon HD 2600 XT - HDMI signal loss to LCD TV
I have a new Mac Pro 2008 with ATI Radeon HD 2600 XT connected to a Sharp LC-42D64U 1080p TV via a DVI to HDMI cable. If I turn the TV off or change the input from the computer to TV and back I get an error message that an incompatible signal is being sent from the output device. Unplugging and plugging cable back in does not reset. I have to hard power off the computer for the signal to be corrected. The Sharp is the only "monitor" connected and nothing else is connected to it.
Thanks for suggestion.
So it must be a real problem, if a company decided to build a device to sell that could take care of it.
What a joke, I am pretty sure this problem is due to the junk ATI card in the machine. There isn't even a support listing on ATI for the card (with mac). However when you search for the problem it was prevalent in a lot of the cards going back to 2005. All of the support responses were the next round of drivers will fix it. -
[Solved] Conflict: ATI Radeon HDMI vs onboard sound crashes PulseAudio
Firstly, please excuse my ignorance about audio issues!
I have a mate running Arch who has an ATI Radeon HD5450 graphics card (using radeon driver) and onboard sound also. He doesn't want to use the graphics card for audio purposes at all. He's getting (seemingly) random switches between PulseAudio thinking its default audio sink is the onboard sound and the graphics card. When the latter happens, PulseAudio crashes out.
(Tried setting the kernel boot parameter 'radeon.audio=1' to try and make the HDMI audio work, but to no avail. Though card is in radeon driver matrix saying HDMI audio feature should work with this card.)
Issuing these commands usually gets things up and running again:
pulseaudio --start && pacmd set-default-sink alsa_output.xxxxx.analog-stereo
where alsa_output.xxxxx.analog-stereo is the appropriate string from the 'Default Sink' line of the ouput from the command:
pactl stat
Tried switching the HDMI input/output off using pavucontrol but after an indeterminate time it creeps back and kills off PulseAudio.
Can the graphics card be blacklisted as a soundcard by PulseAudio or Alsa in some way?
Any ideas to resolve this most welcome!
PS: Had a look through the Arch Wiki on PulseAudio and it helped quite a bit with understanding pactl and pacmd commands.
Edit @29/01/14: Problem solved - by going deeper to kernel level!
From the wiki:
If both devices use the same module then we can use the *enable* parameter from snd-hda-intel module, it's an array of booleans that can enable/disable the desired sound card [put in /etc/modprobe.d/modprobe.conf]:
e.g
options snd-hda-intel enable=1,0
Useful commands to check situation:
cat /proc/asound/cards
cat /proc/asound/modules
aplay -l
Last edited by ninian (2014-01-29 23:14:35)Silex89 wrote:
Hi there!
If you're using the latest kernel spin (3.13), you don't have to really put that kernel parameter in your bootloader config anymore because it's enabled by default already. Which DE are you using? GNOME, GNOME Flashback, Cinnamon and Unity have all integrated with pulseaudio and no extra configuration is needed. If you're using Xfce, LXDE, KDE or any other WM/DE, you'll have to install pulseaudio-alsa and alsa-utils to get it working. That made my HDMI audio work out of the box on my ancient KDE session with the open source driver.
I hope this helps!
Best of Luck
Hi,
okay I just removed the kernel option, thanks for the advice!
I'm using xfce and I already had installed pulseaudio-alsa and alsa-utils, anyway the strange thing is that before switching to headphones (on the other card) it worked, but now it seems that is dead...
Thank you for helping! -
"ATI HDMI output: ATI High Definition Audio Device not plugged in"
Hi, I have a HP Pavilion p6210t PC running Windows 7. A few days ago, the sound stopped working, out of the blue. In Device Manager, it says ATI HDMI output / ATI High Definition Audio Device not plugged in." Computer is not connected with a TV, just a set of basic Logitech speakers.
I really have no idea how this might have happened. Any ideas on fixing this? I've rebooted and all that basic stuff, but nothing. Thanks!Never mind, somehow the speakers were not set as default devices for sound. Fixed.
-
ATI Radeon HDMI works in Ubuntu but not Arch
Hi,
is there any reason why HDMI works for my laptop in Ubuntu but not Arch? They are both apparently using the same open source ATI Radeon (not HD) driver.
The card is an HD 4225 (RS880M I think).
Thanks, Jamie KitsonThe driver versions are very similar, 6.13.1 Ubuntu and 6.13.2 for Arch and Xorg are both 1.9.0. I have reported a bug here:
https://bugs.archlinux.org/task/21442 -
I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
Thanks,
KevinI recommend you install nothing older than the Apple-firware 5770, about US$250.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards" -
PM QS 933 w/ ATI Radeon 9200 Card: Picture rolls vertical line on TV Output
Has anyone who uses an ATI Radeon 9200 Mac video card with s-video out ,
when connecting it to your TV, do you see vertical picture rolls?
I've tried installing Switch Res X to see if that would fix the issue,
however it only address Monitor and not TV resolution.
Is this a drawback of the card, or is there a way to tweak it so it
can display without the picture constantly rolling from bottom to top
the faded white line on picture?The way I have it setup is thusly:
ATI Radeon 9200 Mac Card is set in PCI slot, no other monitor cards exist.
S-VHS little yellow adapter (S-VHS to RCA) plugged into S-VHS slot,
then three way ( Video, Stereo Audio) RCA cable is plugged into that
running directly into AUX RCA front ports of TV.
Picture Quality, Audio Quality is great. Color and Luminance is great.
Only problem is when picture plays from Mac to TV, a faint ghosted
( 10%- 15%) veritical white stripe rolls from top to bottom to
and then again.
Funny thing is...I inserted a DVD Recorder between the Mac and the TV to
see if I could record it so I could make a screen grab of the recording
to post here for everyone, but the recording shows NO VERTICAL LINE ROLL.
So my guess is that it is in the TV. I could try swapping out TVs,
but since all my TVs are analog, ( and 32") I don't and can't afford
to switch to an LCD of the same size right now, and if it is a bug
in the card's way of synching to a TV, esp. Analog, then it would repeat
the process.
I also looked on ATI/AMD's website, nothing in its' FAQ or Support DB.
I plan on trying to call them if I can't figure this out. -
HT4279 ATI Radeon HD 5870 screen resets size after after sleeping. Why?
Purchased an ATI Radeon HD 5870. When connected to 1920x1080 it leaves a third of the screen out. However after starting up it fits the screen. Only after sleeping does it reset to this faulty screen size. I have attempted every Mini dv adapter vga,dvi and hdmi. All lead to the same issue or another.
Is this card defective? Is this an issue with the Lion OS?Ok let me go into more detail for you.
Macpro had 2 Geforce gt 120 video cards. I recently had some blocking issues ( where the screen just over lays a bounch of boxes with random parts of the background and or aps running). Decided to upgrade to the Radeon 5870. Before the upgrade i have been using a Samsung LCD tv and and old Dell monitor. Worked great. Tv res was set to 1920x1080. Instailed the new card. Hooked up the Dell to the DVI output and Tv to a Mini DV at first using the Mini DV to DVI. Ended up with the half the screen issue. Took the back and got the Mini DV to HDMI. I didnt have the size issue but when set to 1080 it was not hidef. Took that back and got the Mini DV to VGA. Now here is where I currently am stuck. When both the TV (Mini to VGA) and the Dell (VGA to DVI) are connected to the 5870 and the harddrive and monitors go to sleep it resets and i lose an 8th of the screen. I currently am just using the TV and everything seems to be fine. Also on the amount i lose there is a dotted line that some times flickers. Not sure if that means anything. -
Xorg: blank screen, mouse cursor only - ATI Radeon HD3450
Last friday, my old Nvidia card died (overheated, I think). I got a replacement today: an ATI HD3450 card by Asus (R600 series). This is an old PC with an AGP slot, so my options were unfortunately limited. I was looking for a Nvidia replacement originally, to avoid having to reconfigure stuff, but that turned out to be too hard. So I got an ATI card instead. I regret this decision now... it works fine in console mode, but I can't get it to work in X.
I've tried radeon and radeonhd drivers. I'm reluctant to try catalyst, seeing as they do not support the current kernel version (2.6.32) and I don't want to downgrade.
radeonhd (xf86-video-radeonhd) is just a disaster. When I try to start X, all I see is a screen which is mostly black, except for a garbled band of about 1/4th the screen height, mostly white with some random colours thrown in.
radeon (xf86-video-ati) doesn't work either. When X starts, all I see is the mouse cursor. And nothing else. Just a black screen with a mouse cursor. The funny thing is, it's all there, I just can't see it. When I tried "startxfce4", the cursor would change shapes when it was over window edges or text boxes. But they were invisible. Too bad.
When I run "startx" as root, I see a couple of twm windows (the default configuration, I normally don't use X as root), and I can interact with them, but it's as if the screen isn't refreshed properly. When I move a window, it isn't redrawn, but it was definitely moved, because when I enter text in it, the text appears at the new position. The 'vesa' driver works, but I can't use that for obvious reasons.
I have read the wiki article about ATI drivers and tried some of the things mentioned there (no xorg.conf, simple xorg.conf with some combinations of the sections mentioned, ...). I'm pretty sure the problem isn't KMS-related, because it's disabled by default with the 2.6.32 kernel.
What pisses me off the most is that I get no error messages whatsoever, so I haven't a clue what could be the problem. I'm working on getting some Xorg.0.log output in this thread ASAP.
Anybody have any idea what could cause this? I would really like to get this working soon. It would kinda suck if it turns out I've replaced an unusable graphics card with another unusable graphics card.
If the radeonhd problem is easier to solve, then solutions for that are welcome as well. I just need a working driver that can handle compiz, and doesn't require me to downgrade my kernel.
EDIT: Xorg.0.log contents, enjoy!
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux arch 2.6.32-ARCH #1 SMP PREEMPT Tue Feb 9 14:46:08 UTC 2010 i686
Kernel command line: root=/dev/sda6 ro vga=838 radeon.modeset=0
Build Date: 17 February 2010 07:52:42PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 2 17:45:35 2010
(II) Loader magic: 0x81e4ca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:95c6:1043:0028 ATI Technologies Inc RV620 LE AGP [Radeon HD 3450] rev 0, Mem @ 0xe0000000/268435456, 0xf9000000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:00:0
(II) RADEON(0): TOTO SAYS 00000000f9000000
(II) RADEON(0): MMIO registers at 0x00000000f9000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3450" (ChipID = 0x95c6)
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1043 SubsystemID: 0x0028
IOBaseAddress: 0x9000
Filename: SV31552.bin
BIOS Bootup Message:
95C6.10.88.0.19.AS02
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x1fffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x1fffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 600000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will not try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 600.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=120000; xclk=40000
Shared DDC line: 0 3
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: HDMI-0
Connector: HDMI-A
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e60
(II) RADEON(0): Port2:
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_KLDSCP_DAC2
DFP2: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:DDC control interface" registered at address 0x6E.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: AIC Model: 23 Serial#: 673
(II) RADEON(0): Year: 2007 Week: 26
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing not preferred mode in violation of standard!
(II) RADEON(0): redX: 0.648 redY: 0.335 greenX: 0.282 greenY: 0.604
(II) RADEON(0): blueX: 0.150 blueY: 0.072 whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
(II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 119.0 MHz Image Size: 470 x 300 mm
(II) RADEON(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) RADEON(0): Serial No: 00673
(II) RADEON(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 150 MHz
(II) RADEON(0): Monitor name: H-W22 DVI
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0005232300a1020000
(II) RADEON(0): 1a110103802f1e78e837a0a655489a26
(II) RADEON(0): 125054bfef808140818081c09500950f
(II) RADEON(0): b300010101017c2e90a0601a1e403020
(II) RADEON(0): 3600d62c1100001a000000ff00303036
(II) RADEON(0): 37330a20202020202020000000fd0037
(II) RADEON(0): 4b18530f000a202020202020000000fc
(II) RADEON(0): 00482d573232204456490a2020200061
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
(II) RADEON(0): Manufacturer: AIC Model: 23 Serial#: 673
(II) RADEON(0): Year: 2007 Week: 26
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing not preferred mode in violation of standard!
(II) RADEON(0): redX: 0.648 redY: 0.335 greenX: 0.282 greenY: 0.604
(II) RADEON(0): blueX: 0.150 blueY: 0.072 whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
(II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 119.0 MHz Image Size: 470 x 300 mm
(II) RADEON(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) RADEON(0): Serial No: 00673
(II) RADEON(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 150 MHz
(II) RADEON(0): Monitor name: H-W22 DVI
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0005232300a1020000
(II) RADEON(0): 1a110103802f1e78e837a0a655489a26
(II) RADEON(0): 125054bfef808140818081c09500950f
(II) RADEON(0): b300010101017c2e90a0601a1e403020
(II) RADEON(0): 3600d62c1100001a000000ff00303036
(II) RADEON(0): 37330a20202020202020000000fd0037
(II) RADEON(0): 4b18530f000a202020202020000000fc
(II) RADEON(0): 00482d573232204456490a2020200061
(II) RADEON(0): Panel infos found from DDC detailed: 1680x1050
(II) RADEON(0): EDID vendor "AIC", prod id 35
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Output DVI-0 connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output DVI-0 using initial mode 1680x1050
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit e0000000 0 0
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(==) RADEON(0): Using 24 bit depth buffer
mc fb loc is 00ff00e0
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x20000000
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262144 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00b7c000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00b80000
(II) RADEON(0): Will use 11760 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 11760 kb for back buffer at offset 0x00b84000
(II) RADEON(0): Will use 11760 kb for depth buffer at offset 0x01700000
(II) RADEON(0): Will use 112640 kb for textures at offset 0x0227c000
(II) RADEON(0): Will use 114192 kb for X Server offscreen at offset 0x0907c000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [agp] Mode 0x1f00421b [AGP 0x10de/0x00e1; Card 0x1002/0x95c6 0x1043/0x0028]
(II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xf0000000
(II) RADEON(0): [agp] Ring mapped at 0xb712c000
(II) RADEON(0): [agp] ring read ptr handle = 0xf0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb72fb000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xf0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xa6ebd000
(II) RADEON(0): [agp] GART texture map handle = 0xf0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xa523d000
(II) RADEON(0): [drm] register handle = 0x2f200000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x00ff00e0 is: 0x00ff00e0
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x0000de00
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 116932608 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1680x1050 - 1840 1080 9
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
freq: 119000000
best_freq: 119000000
best_feedback_div: 119
best_ref_div: 3
best_post_div: 9
(II) RADEON(0): crtc(0) Clock: mode 119000, PLL 119000
(II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x77(119), pdiv 9
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1680x1050 - 1840 1080 9
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
freq: 119000000
best_freq: 119000000
best_feedback_div: 119
best_ref_div: 3
best_post_div: 9
(II) RADEON(0): crtc(0) Clock: mode 119000, PLL 119000
(II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x77(119), pdiv 9
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r600_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 444 x 277
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device PS2++ Logitech MX Mouse
(**) PS2++ Logitech MX Mouse: always reports core events
(**) PS2++ Logitech MX Mouse: Device: "/dev/input/event4"
(II) PS2++ Logitech MX Mouse: Found 12 mouse buttons
(II) PS2++ Logitech MX Mouse: Found scroll wheel(s)
(II) PS2++ Logitech MX Mouse: Found relative axes
(II) PS2++ Logitech MX Mouse: Found x and y relative axes
(II) PS2++ Logitech MX Mouse: Configuring as mouse
(**) PS2++ Logitech MX Mouse: YAxisMapping: buttons 4 and 5
(**) PS2++ Logitech MX Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS2++ Logitech MX Mouse" (type: MOUSE)
(**) PS2++ Logitech MX Mouse: (accel) keeping acceleration scheme 1
(**) PS2++ Logitech MX Mouse: (accel) acceleration profile 0
(II) PS2++ Logitech MX Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
(II) RADEON(0): MC_AGP_LOCATION : 0x00000000
(II) RADEON(0): avivo_restore !
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Another update: the card seems to work just fine under windows, so it is definitely a configuration or driver issue.
Last edited by Sander (2010-03-02 17:12:40)"Enabling KMS will make Xorg fall back to software rasterizing, at the cost of 3D performance. " <- is this still true at the moment? In that case, enabling KMS really isn't the solution I'm looking for. Back to square one
This is not true. Software rasterization indicates that KMS was not set up correctly. You will get 3D acceleration with KMS correctly configured.
Thanks for taking the time to reply
I'll give enabling KMS a try. What thread is it that you're talking about? Also should I follow the "early start" or "late start" instructions?
EDIT: I'm guessing you mean this one? http://bbs.archlinux.org/viewtopic.php?pid=613720
That thread is the one I meant.
Your xf86-video-ati doesn't have support for KMS - you have to rebuild it against libdrm_radeon. This also means that you have to rebuild mesa against same new libdrm because mesa doesn't have KMS support without libdrm_radeon either.
Is this information applicable to my situation? No instructions on how to do this are provided, so I have no idea how to try it, or if it's worth trying at all.
Yes, this is a problem. You have to modify a PKGBUILD or two and build/install the packages in the correct order. I detail the right way to do everything below.
I used the following packages:
* kernel26-git: http://aur.archlinux.org/packages.php?ID=25304 (you must configure with CONFIG_DRM_RADEON=m. CONFIG_DRM_RADEON_KMS=y enables KMS by default. you should be presented with a configuration menu when the package builds. type '/' to search.)
* kernel26-firmware-git: http://aur.archlinux.org/packages.php?ID=25782
* radeon_ucode: http://aur.archlinux.org/packages.php?ID=33016
* libdrm-git: http://aur.archlinux.org/packages.php?ID=10254 (you must edit the PKGBUILD to enable radeon support, see below)
* glproto-git: http://aur.archlinux.org/packages.php?ID=18964
* dri2proto-git: http://aur.archlinux.org/packages.php?ID=19051
* libgl-git: http://aur.archlinux.org/packages.php?ID=19044 (this is out of date and requires a patch. see my comment on the AUR page)
* mesa-git: http://aur.archlinux.org/packages.php?ID=8266 (you can reuse src/mesa from libgl-git, it clones the same repository)
* xf86-video-ati-git: http://aur.archlinux.org/packages.php?ID=15374 (you can reuse src/mesa from libgl-git)
libdrm-git PKGBUILD:
sh autogen.sh --prefix=/usr \
--enable-nouveau-experimental-api \
--enable-udev || return 1
# --enable-radeon-experimental-api
libdrm-git PKGBUILD modified:
sh autogen.sh --prefix=/usr \
--enable-radeon-experimental-api \
--enable-udev || return 1
Install those packages in that order and add yourself to the video group. Make sure that your grub configuration has an option to select the new kernel. Also make sure all of your PKGBUILDs from AUR are up to date. A week or two ago they were all wrong (as a noted above, one of them is still wrong and requires a patch).
I hope that helps. Eventually Arch will support KMS for radeon by default, but the driver and the kernel need to go through another release or two.
Last edited by tss (2010-03-02 20:34:52) -
ATI Radeon HD 6520G / 7600M troubles. Glitches, crashing and such.
I've been am having issues with getting my graphics card to work properly.
EDIT: tl;dr Running cinnamon with xf86-video-ati is no bueno https://dl.dropbox.com/u/7122698/bbs_ar … adface.png (other stuff happen as well, but this is the most annoying)
I was using catalyst until recently. When I deemed the glitches and the occasional crashing (which I assumed were caused by the driver) to be too much,
I decided to switch over to xf86-video-ati.
While the open source drivers seem to work, they manage to somehow corrupt pixmaps/textures and they manage to hang my computer even more often than the catalyst did.
I'm running aur/linux-lqx 3.6.4-1-lqx (as well as core/linux 3.6.5-1), extra/xf86-video-ati 1:6.14.6-2, extra/xorg-server 1.13.0-3, extra/gdm 3.6.1-2 and aur/cinnamon 1.6.4-4 . I've
also moved the damn thing to core/systemd 195-2 with sysvcompat.
I doubt that the problems are caused by gnome 3.6 having troubles with systemd or ati drivers, as I'm also having texture corruptions in opengl applications (using SDL for init stuff.)
I'm sure that there is nothing wrong with my cards, as they work fine under windows.
Right now I'm running using late kms start.
/etc/X11/ contains configs for twm, xinit and input drivers (all installed by their respective pkgs), as well as the config that I'm using right now:
/etc/X11/xorg.conf.d/20-radeon.conf
Section "Device"
Identifier "UghImSoAngryNow"
Driver "radeon"
Option "NoAccel" "on"
EndSection
This is, of course, not preferable. However, it fixes nearly all the pixmap corruption problems and I haven't gotten it to die on me yet. Occasionally, my desktop background becomes
black with lines of varying (read: 50) shades of grey (aka. white noise), before it reloads itself, but haven't crashed yet.
The wiki page on ATI tells me to try and disable KMS by booting with radeon.modeset=0 or nomodeset. However, this causes Xorg to fall back to xf86-video-vesa, which
is itself quite glitchy (cursor flickers, all ttys are corrupted (unusable) except for the one I'm on, etc.)
Any help fixing this would be greatly appreciated.
(I'll see if I can post screens with the artifacts.)
Stuff nobody needs:
$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6520G]
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Port
00:10.0 USB controller: Advanced Micro Devices [AMD] Hudson USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13)
00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40)
00:14.7 SD Host controller: Advanced Micro Devices [AMD] Hudson SD Flash Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
$ cat /var/log/Xorg.0.log # With accel enabled
[ 10381.855]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 10381.855] X Protocol Version 11, Revision 0
[ 10381.855] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 10381.855] Current Operating System: Linux dotfloat-asus 3.6.4-1-lqx #1 ZEN SMP PREEMPT Sun Nov 4 19:35:58 CET 2012 x86_64
[ 10381.855] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lqx root=UUID=bfd9d0cd-2be7-4539-9dc4-d273dbecbb5d ro resume=/dev/sda6 mem=4G
[ 10381.855] Build Date: 19 October 2012 03:54:56PM
[ 10381.855]
[ 10381.855] Current version of pixman: 0.26.2
[ 10381.855] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10381.855] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10381.855] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 5 22:08:35 2012
[ 10381.855] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10381.855] (==) No Layout section. Using the first Screen section.
[ 10381.855] (==) No screen section available. Using defaults.
[ 10381.855] (**) |-->Screen "Default Screen Section" (0)
[ 10381.855] (**) | |-->Monitor "<default monitor>"
[ 10381.855] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 10381.855] (**) | |-->Device "UghImSoAngryNow"
[ 10381.855] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10381.855] (==) Automatically adding devices
[ 10381.855] (==) Automatically enabling devices
[ 10381.856] (==) Automatically adding GPU devices
[ 10381.856] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10381.856] Entry deleted from font path.
[ 10381.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10381.856] Entry deleted from font path.
[ 10381.856] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10381.856] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10381.856] Entry deleted from font path.
[ 10381.856] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10381.856] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 10381.856] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10381.856] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10381.856] (II) Loader magic: 0x7fcc20
[ 10381.856] (II) Module ABI versions:
[ 10381.856] X.Org ANSI C Emulation: 0.4
[ 10381.856] X.Org Video Driver: 13.0
[ 10381.856] X.Org XInput driver : 18.0
[ 10381.856] X.Org Server Extension : 7.0
[ 10381.857] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10381.857] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 10381.858] (--) PCI:*(0:0:1:0) 1002:9647:1043:2122 rev 0, Mem @ 0xb0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 10381.858] (--) PCI: (0:1:0:0) 1002:6840:1043:2122 rev 0, Mem @ 0xc0000000/268435456, 0xfea20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 10381.858] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10381.858] Initializing built-in extension Generic Event Extension
[ 10381.858] Initializing built-in extension SHAPE
[ 10381.858] Initializing built-in extension MIT-SHM
[ 10381.858] Initializing built-in extension XInputExtension
[ 10381.858] Initializing built-in extension XTEST
[ 10381.858] Initializing built-in extension BIG-REQUESTS
[ 10381.858] Initializing built-in extension SYNC
[ 10381.858] Initializing built-in extension XKEYBOARD
[ 10381.858] Initializing built-in extension XC-MISC
[ 10381.858] Initializing built-in extension SECURITY
[ 10381.858] Initializing built-in extension XINERAMA
[ 10381.858] Initializing built-in extension XFIXES
[ 10381.858] Initializing built-in extension RENDER
[ 10381.858] Initializing built-in extension RANDR
[ 10381.858] Initializing built-in extension COMPOSITE
[ 10381.858] Initializing built-in extension DAMAGE
[ 10381.858] Initializing built-in extension MIT-SCREEN-SAVER
[ 10381.858] Initializing built-in extension DOUBLE-BUFFER
[ 10381.858] Initializing built-in extension RECORD
[ 10381.858] Initializing built-in extension DPMS
[ 10381.858] Initializing built-in extension X-Resource
[ 10381.858] Initializing built-in extension XVideo
[ 10381.858] Initializing built-in extension XVideo-MotionCompensation
[ 10381.858] Initializing built-in extension XFree86-VidModeExtension
[ 10381.858] Initializing built-in extension XFree86-DGA
[ 10381.858] Initializing built-in extension XFree86-DRI
[ 10381.858] Initializing built-in extension DRI2
[ 10381.858] (II) LoadModule: "glx"
[ 10381.859] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10381.859] (II) Module glx: vendor="X.Org Foundation"
[ 10381.859] compiled for 1.13.0, module version = 1.0.0
[ 10381.859] ABI class: X.Org Server Extension, version 7.0
[ 10381.859] (==) AIGLX enabled
[ 10381.859] Loading extension GLX
[ 10381.859] (II) LoadModule: "radeon"
[ 10381.859] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 10381.859] (II) Module radeon: vendor="X.Org Foundation"
[ 10381.859] compiled for 1.13.0, module version = 6.14.6
[ 10381.859] Module class: X.Org Video Driver
[ 10381.859] ABI class: X.Org Video Driver, version 13.0
[ 10381.859] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA
[ 10381.866] (++) using VT number 1
[ 10381.867] (II) [KMS] Kernel modesetting enabled.
[ 10381.867] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 10381.867] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 10381.867] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 10381.867] (==) RADEON(0): Default visual is TrueColor
[ 10381.867] (==) RADEON(0): RGB weight 888
[ 10381.867] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 10381.867] (--) RADEON(0): Chipset: "SUMO" (ChipID = 0x9647)
[ 10381.867] (II) RADEON(0): PCIE card detected
[ 10381.867] (II) Loading sub module "exa"
[ 10381.867] (II) LoadModule: "exa"
[ 10381.867] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 10381.906] (II) Module exa: vendor="X.Org Foundation"
[ 10381.906] compiled for 1.13.0, module version = 2.6.0
[ 10381.906] ABI class: X.Org Video Driver, version 13.0
[ 10381.906] (II) RADEON(0): KMS Color Tiling: enabled
[ 10381.906] (II) RADEON(0): KMS Pageflipping: enabled
[ 10381.906] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 10382.004] (II) RADEON(0): Output VGA-0 has no monitor section
[ 10382.044] (II) RADEON(0): Output LVDS has no monitor section
[ 10382.108] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 10382.205] (II) RADEON(0): EDID for output VGA-0
[ 10382.245] (II) RADEON(0): EDID for output LVDS
[ 10382.245] (II) RADEON(0): Manufacturer: CMO Model: 15a7 Serial#: 0
[ 10382.245] (II) RADEON(0): Year: 2010 Week: 31
[ 10382.245] (II) RADEON(0): EDID Version: 1.3
[ 10382.245] (II) RADEON(0): Digital Display Input
[ 10382.245] (II) RADEON(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 10382.245] (II) RADEON(0): Gamma: 2.20
[ 10382.245] (II) RADEON(0): No DPMS capabilities specified
[ 10382.245] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 10382.245] (II) RADEON(0): First detailed timing is preferred mode
[ 10382.245] (II) RADEON(0): redX: 0.617 redY: 0.340 greenX: 0.320 greenY: 0.598
[ 10382.245] (II) RADEON(0): blueX: 0.160 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 10382.245] (II) RADEON(0): Manufacturer's mask: 0
[ 10382.245] (II) RADEON(0): Supported detailed timing:
[ 10382.245] (II) RADEON(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 10382.245] (II) RADEON(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 10382.245] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 10382.245] (II) RADEON(0): N156BGE-L21
[ 10382.245] (II) RADEON(0): CMO
[ 10382.245] (II) RADEON(0): N156BGE-L21
[ 10382.245] (II) RADEON(0): EDID (in hex):
[ 10382.245] (II) RADEON(0): 00ffffffffffff000dafa71500000000
[ 10382.245] (II) RADEON(0): 1f140103802313780a00259e57529929
[ 10382.245] (II) RADEON(0): 15505400000001010101010101010101
[ 10382.245] (II) RADEON(0): 010101010101121b5664500014301022
[ 10382.245] (II) RADEON(0): 260058c110000018000000fe004e3135
[ 10382.245] (II) RADEON(0): 364247452d4c32310a20000000fe0043
[ 10382.245] (II) RADEON(0): 4d4f0a202020202020202020000000fe
[ 10382.245] (II) RADEON(0): 004e3135364247452d4c32310a200095
[ 10382.245] (II) RADEON(0): Printing probed modes for output LVDS
[ 10382.245] (II) RADEON(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10382.245] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 10382.245] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 10382.245] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 10382.245] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 10382.245] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 10382.245] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 10382.245] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 10382.309] (II) RADEON(0): EDID for output HDMI-0
[ 10382.309] (II) RADEON(0): Output VGA-0 disconnected
[ 10382.309] (II) RADEON(0): Output LVDS connected
[ 10382.309] (II) RADEON(0): Output HDMI-0 disconnected
[ 10382.309] (II) RADEON(0): Using exact sizes for initial modes
[ 10382.309] (II) RADEON(0): Output LVDS using initial mode 1366x768
[ 10382.309] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 10382.309] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:fba0000
[ 10382.309] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 10382.309] (==) RADEON(0): DPI set to (96, 96)
[ 10382.309] (II) Loading sub module "fb"
[ 10382.309] (II) LoadModule: "fb"
[ 10382.309] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10382.309] (II) Module fb: vendor="X.Org Foundation"
[ 10382.309] compiled for 1.13.0, module version = 1.0.0
[ 10382.309] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10382.309] (II) Loading sub module "ramdac"
[ 10382.309] (II) LoadModule: "ramdac"
[ 10382.309] (II) Module "ramdac" already built-in
[ 10382.309] (--) Depth 24 pixmap format is 32 bpp
[ 10382.309] (II) RADEON(0): [DRI2] Setup complete
[ 10382.309] (II) RADEON(0): [DRI2] DRI driver: r600
[ 10382.309] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 10382.309] (II) RADEON(0): Front buffer size: 4128K
[ 10382.309] (II) RADEON(0): VRAM usage limit set to 228182K
[ 10382.309] (==) RADEON(0): Backing store disabled
[ 10382.309] (II) RADEON(0): Direct rendering enabled
[ 10382.379] (II) RADEON(0): Setting EXA maxPitchBytes
[ 10382.379] (II) EXA(0): Driver allocated offscreen pixmaps
[ 10382.379] (II) EXA(0): Driver registered support for the following operations:
[ 10382.379] (II) Solid
[ 10382.379] (II) Copy
[ 10382.379] (II) Composite (RENDER acceleration)
[ 10382.379] (II) UploadToScreen
[ 10382.379] (II) DownloadFromScreen
[ 10382.379] (II) RADEON(0): Acceleration enabled
[ 10382.379] (==) RADEON(0): DPMS enabled
[ 10382.379] (==) RADEON(0): Silken mouse enabled
[ 10382.379] (II) RADEON(0): Set up textured video
[ 10382.379] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 10382.379] (II) RADEON(0): [XvMC] Extension initialized.
[ 10382.379] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 10382.379] (--) RandR disabled
[ 10382.749] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 10382.749] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 10382.749] (II) AIGLX: enabled GLX_ARB_create_context
[ 10382.749] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 10382.749] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 10382.749] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 10382.749] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 10382.750] (II) AIGLX: Loaded and initialized r600
[ 10382.750] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 10382.775] (II) RADEON(0): Setting screen physical size to 361 x 203
[ 10382.828] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 10382.828] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10382.828] (II) LoadModule: "evdev"
[ 10382.828] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10382.829] (II) Module evdev: vendor="X.Org Foundation"
[ 10382.829] compiled for 1.13.0, module version = 2.7.3
[ 10382.829] Module class: X.Org XInput Driver
[ 10382.829] ABI class: X.Org XInput driver, version 18.0
[ 10382.829] (II) Using input driver 'evdev' for 'Power Button'
[ 10382.829] (**) Power Button: always reports core events
[ 10382.829] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 10382.829] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10382.829] (--) evdev: Power Button: Found keys
[ 10382.829] (II) evdev: Power Button: Configuring as keyboard
[ 10382.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 10382.829] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10382.829] (**) Option "xkb_rules" "evdev"
[ 10382.829] (**) Option "xkb_model" "evdev"
[ 10382.829] (**) Option "xkb_layout" "us"
[ 10382.864] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 10382.864] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10382.864] (II) Using input driver 'evdev' for 'Video Bus'
[ 10382.864] (**) Video Bus: always reports core events
[ 10382.864] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 10382.864] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10382.864] (--) evdev: Video Bus: Found keys
[ 10382.864] (II) evdev: Video Bus: Configuring as keyboard
[ 10382.864] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input6/event6"
[ 10382.864] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 10382.864] (**) Option "xkb_rules" "evdev"
[ 10382.864] (**) Option "xkb_model" "evdev"
[ 10382.864] (**) Option "xkb_layout" "us"
[ 10382.865] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 10382.865] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10382.865] (II) Using input driver 'evdev' for 'Video Bus'
[ 10382.865] (**) Video Bus: always reports core events
[ 10382.865] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 10382.865] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10382.865] (--) evdev: Video Bus: Found keys
[ 10382.865] (II) evdev: Video Bus: Configuring as keyboard
[ 10382.865] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/LNXVIDEO:01/input/input7/event7"
[ 10382.865] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 10382.865] (**) Option "xkb_rules" "evdev"
[ 10382.865] (**) Option "xkb_model" "evdev"
[ 10382.865] (**) Option "xkb_layout" "us"
[ 10382.866] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 10382.866] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10382.866] (II) Using input driver 'evdev' for 'Power Button'
[ 10382.866] (**) Power Button: always reports core events
[ 10382.866] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 10382.866] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10382.866] (--) evdev: Power Button: Found keys
[ 10382.866] (II) evdev: Power Button: Configuring as keyboard
[ 10382.866] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 10382.866] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 10382.866] (**) Option "xkb_rules" "evdev"
[ 10382.866] (**) Option "xkb_model" "evdev"
[ 10382.866] (**) Option "xkb_layout" "us"
[ 10382.866] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 10382.866] (II) No input driver specified, ignoring this device.
[ 10382.866] (II) This device may have been added with another device file.
[ 10382.866] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 10382.866] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 10382.866] (II) Using input driver 'evdev' for 'Sleep Button'
[ 10382.866] (**) Sleep Button: always reports core events
[ 10382.866] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 10382.867] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 10382.867] (--) evdev: Sleep Button: Found keys
[ 10382.867] (II) evdev: Sleep Button: Configuring as keyboard
[ 10382.867] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 10382.867] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 10382.867] (**) Option "xkb_rules" "evdev"
[ 10382.867] (**) Option "xkb_model" "evdev"
[ 10382.867] (**) Option "xkb_layout" "us"
[ 10382.867] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10382.867] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event11)
[ 10382.867] (II) No input driver specified, ignoring this device.
[ 10382.867] (II) This device may have been added with another device file.
[ 10382.867] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 10382.868] (II) config/udev: Adding input device Chicony CNFA078 (/dev/input/event9)
[ 10382.868] (**) Chicony CNFA078: Applying InputClass "evdev keyboard catchall"
[ 10382.868] (II) Using input driver 'evdev' for 'Chicony CNFA078'
[ 10382.868] (**) Chicony CNFA078: always reports core events
[ 10382.868] (**) evdev: Chicony CNFA078: Device: "/dev/input/event9"
[ 10382.868] (--) evdev: Chicony CNFA078: Vendor 0x4f2 Product 0xb23b
[ 10382.868] (--) evdev: Chicony CNFA078: Found keys
[ 10382.868] (II) evdev: Chicony CNFA078: Configuring as keyboard
[ 10382.868] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input9/event9"
[ 10382.868] (II) XINPUT: Adding extended input device "Chicony CNFA078" (type: KEYBOARD, id 11)
[ 10382.868] (**) Option "xkb_rules" "evdev"
[ 10382.868] (**) Option "xkb_model" "evdev"
[ 10382.868] (**) Option "xkb_layout" "us"
[ 10382.868] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event12)
[ 10382.868] (II) No input driver specified, ignoring this device.
[ 10382.868] (II) This device may have been added with another device file.
[ 10382.869] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event13)
[ 10382.869] (II) No input driver specified, ignoring this device.
[ 10382.869] (II) This device may have been added with another device file.
[ 10382.869] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 10382.869] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 10382.869] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 10382.869] (**) Asus WMI hotkeys: always reports core events
[ 10382.869] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
[ 10382.869] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 10382.869] (--) evdev: Asus WMI hotkeys: Found keys
[ 10382.869] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 10382.869] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event8"
[ 10382.869] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 10382.869] (**) Option "xkb_rules" "evdev"
[ 10382.869] (**) Option "xkb_model" "evdev"
[ 10382.869] (**) Option "xkb_layout" "us"
[ 10382.869] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10382.869] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10382.869] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10382.870] (**) AT Translated Set 2 keyboard: always reports core events
[ 10382.870] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 10382.870] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10382.870] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10382.870] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10382.870] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10382.870] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 10382.870] (**) Option "xkb_rules" "evdev"
[ 10382.870] (**) Option "xkb_model" "evdev"
[ 10382.870] (**) Option "xkb_layout" "us"
[ 10382.870] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[ 10382.870] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 10382.870] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 10382.870] (II) LoadModule: "synaptics"
[ 10382.870] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 10382.870] (II) Module synaptics: vendor="X.Org Foundation"
[ 10382.870] compiled for 1.13.0, module version = 1.6.2
[ 10382.870] Module class: X.Org XInput Driver
[ 10382.870] ABI class: X.Org XInput driver, version 18.0
[ 10382.870] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 10382.870] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 10382.871] (**) Option "Device" "/dev/input/event10"
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2436
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1044
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 10382.894] (**) Option "TapButton1" "1"
[ 10382.894] (**) Option "TapButton2" "2"
[ 10382.894] (**) Option "TapButton3" "3"
[ 10382.894] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 10382.894] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 10382.904] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 10382.904] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[ 10382.904] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.075
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 10382.904] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 10382.904] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 10382.904] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 10382.904] (II) No input driver specified, ignoring this device.
[ 10382.904] (II) This device may have been added with another device file.
[ 10382.904] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 10382.904] (II) No input driver specified, ignoring this device.
[ 10382.904] (II) This device may have been added with another device file.
[ 10383.047] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10383.047] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10383.047] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10383.591] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10383.592] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10383.592] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10397.163] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10397.163] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10397.163] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10397.460] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10397.460] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10397.460] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10565.020] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10565.020] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10565.020] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10567.301] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10567.301] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10567.301] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10624.571] (II) RADEON(0): EDID vendor "CMO", prod id 5543
[ 10624.571] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10624.571] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz eP)
[ 10656.759] (II) UnloadModule: "synaptics"
[ 10656.759] (II) evdev: AT Translated Set 2 keyboard: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Asus WMI hotkeys: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Chicony CNFA078: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Sleep Button: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Power Button: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Video Bus: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Video Bus: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.759] (II) evdev: Power Button: Close
[ 10656.759] (II) UnloadModule: "evdev"
[ 10656.779] Server terminated successfully (0). Closing log file.
Last edited by dotfloat (2012-11-06 22:21:05)Nope. Minecraft seems to run fine, albeit quite slowly:
https://dl.dropbox.com/u/7122698/bbs_ar … pyface.png
Cinnamon screenshot: https://dl.dropbox.com/u/7122698/bbs_ar … adface.png
The rendering errors at the bottom border of the "Cinnamon Settings" window and the white boxes between the chromium tabs. These are more or less permanent, they stay there until the window is destroyed, and reappear quickly after the window is first rendered. The white noise looking things on the chromium window stay there until the window repaints itself. Moving the chromium window causes the white noise to start flickering.
The screen froze when I opened a nautilus window and tried to resize it. Xorg.0.log doesn't mention any errors.
This doesn't happen in Cinnamon 2D, so I assume it has something to do with the OpenGL implementation.
Forcing 7600M by adding
BusID "PCI:1:0:0"
to
/etc/X11/xorg.conf.d/20-radeon.cfg
causes Xorg to not even start.
I'm thinking that I've managed to improperly configure the drivers, although I don't see how.
Screenshot from aur/doomsday running doom shareware: https://dl.dropbox.com/u/7122698/bbs_ar … s_good.png
The .wad (data file containing all the game's assets) isn't corrupted. The engine itself might be, as the sprites are always corrupted in the same way. Note the barrel on the right side that has parts of a lower resolution version of itself (mipmapping) and blue armour, the light thingy in the middle that contains a lower resolution of itself and a shotgun ammo, and the pillar in the other room that is just not nice to look at. Moving away or towards the sprite (which effectively changes the mipmap level rendered) might make the sprite look as it is supposed to be. -
Fix for video tearing ATI Radeon HD 4200 using Catalyst Driver??
Hey guys, as the title asks, is there a fix for pretty serious video tearing that I am experiencing on my ATI Radeon HD 4200 video card? I'm using the proprietary driver (catalyst, built from AUR) and would prefer to use that one or, if need be, radeonhd driver as I need HDMI sound output.
Below is my xorg.conf.
Many many thanks in advance to anyone who may have some ideas/experience with this.
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
# Driver "radeonhd"
BusID "PCI:1:5:0"
Option "Audio" "on"
Option "HDMI" "all"
Option "AccelMethod" "exa" # to enable 2D and Xv acceleration on R6xx/R7xx - default AccelMethod shadowfb
Option "DRI" "on" # to enable 2D and Xv acceleration on R6xx/R7xx - default DRI disabled
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionFIXED - Bad file from ATI Radeon - Use windows/ hp drivers- Cat control center not updated nor used,? thats why I could not see/ control dual monitors. This 4200 series is probaly on its way out.
I had to pay to get it fixed. Do NOT Update using the update from ATI Readeon? It did not work for me.
Hope that might help someone.
Bye -
Help with problems with my HDMI Output to my TV! Help Plz
Problem #1: Tv is overscanning (think thats what its called). It seems to be on top left and right. How do I fix this?
Problem #2: Audio thought HDMI Isnt happening at all Id like it to 5.1 surround sounds but its giving me no audio when I change it to HDMI Output in sound settings. (its detected and I can chose it, it just doesnt work )
Graphics Driver:
xf86_ati_dri
ATI Radeon 4730
Desktop Environment:
GDM
Gnome 3 Shell
XORG 1.11 (or which ever is the newest)
Last edited by kanazky (2011-11-06 01:43:29)Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
LVDS connected 1920x1080+0+0 (normal left inverted right x axis y axis) 345mm x 194mm
1920x1080 59.9*+
1680x1050 60.0
1400x1050 60.0
1280x1024 59.9
1440x900 59.9
1280x960 59.9
1280x854 59.9
1280x800 59.8
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 1600mm x 900mm
1920x1080 60.0*+
1920x1080i 30.0
1280x720 60.0
720x480 59.9
640x480 60.0
VGA-0 disconnected (normal left inverted right x axis y axis)
This is my xrandr -
ATI Radeon 5770 for 2008 Mac Pro
I just bought this card for my 2008 mac pro. According to the Apple store's Q&A, this card should work fine with my computer. I am curious if this is just a simple swap, or if I need to attach any additional power cable to the mother board.
Also, is it possible to use this card and the ATI Radeon HD2600 simultaneously on my computer? I have a USB card and a black magic HDMI in/out card I use for video already installed. Just want to make sure I won't pull too much power and overheat.
Thanks!I had basically the same problem with trying to run the Mac 5770 with a Mac/PC 3870 in my 2008 Octo 3.1 MP. I was hoping I could use the component output on the 3870 (using the 9 pin ATI adapter that has component, s-video and composite outputs) for my Sony CRT Pro monitor and using the DVI to run a large screen TV for Netflicks, etc, or another smaller digital monitor. Plus, I was keeping my fingers crossed that Apple's "Color" application wouldn't see the 3850 if I had the AV switcher turning the connections off when not in use while editing in FCP Studio (Color will usually not launch if it "sees" two graphics cards connected to monitors).
Apparently the 5770 firmware has a conflict with other ATI cards: 2600, 3850 and maybe even 4870. I thought they would have a better chance of working together being ATI, but apparently not. Another user posted that he was able to get a NVIDIA GT 120 working fine with the ATI 5770 after having the same issues with the ATI 2600, but whether Color will launch is another question. I suppose I can try some older cheaper NVIDIA's maybe even some with analog outputs that the 3870 had if I could find one? Any suggestions or success stories in running a second card with the 5770?
Finally, I removed the 3870 to see how the 5770 would work by itself: the screen start-up time went from several minutes to seconds. Both monitors are very snappy and working fine with one 23" CD in the DVI port and the other23" CD using the mini-display port adapter (just the single $29 one, not dual DVI $99 type).
I don't play games or do much 3D, so I hope it was worth the upgrade price, as the 3870 had a passive cooler, was rock solid in every aspect and ran Core apps fast, but it didn't have OpenCL, so I'm hoping to see some improvement across the board in my graphics, especially the Adobe CS5 Suite.
Maybe you are looking for
-
File Sharing over IPsec with RV220W
Hello all, Ultimately, the issue is that I have two RV220Ws with an IPsec VPN tunnel between them that appears to be up but that I can't seem to get folder sharing going over. Here's the background. I originally had two Netgear FVS318s set up with a
-
X61s, Video driver, Win 7, External Monitor, Low Res
I've seen this problem posted before or similar, but no solution mentioned so far has any effect. Replaced totally failed HDD last week and moved up to Win 7 Professional (so something good came of it). Now the X61s can't run external monitors at any
-
Unable to activate the DSO in PM Business Content
I am trying to activate the Business Content for PM (Plant Maintenance). I was able to activate the cubes without any problem. But when I tried activating the DSO 0PM_DS01, the activation is failing while activating the DSO with the message. "You are
-
CAn someone help me?
-
Roll-out Project Implementation
Hi Experts In our Company SAP is implemented for Great Britain. Now they want to go for global implementation like USA, Denmark, Germany, Canada, Mexico etc. In that case, I have some doubts. 1. Whether the same SAP package can be used for imp