ATI Radeon X1900 Xt Drivers for Leopard not yet provided

Still waiting For Apple to provide Leopard level drivers for the ATI Radeon X1900XT graphics card. Problems are documented as horizontal lines on display and include periods of lockups but only when running under Leopard. Graphics card has been cleaned and reset and re-installed according to manufacturers specifications. They conclude the required drivers to support this card can only come from Apple.
Backing off of Leopard is NOT an option. There are very few cards that fit this G5 (not a MacPro). I have never had this much trouble trying to get help. Assistance would be greatly appreciated.
V Falzone

Is it a retail card or OEM? someone mentioned their problem was resolved with drivers from ATI.
http://ati.amd.com/support/drivers/mac/MacX1900G5Updater.html

Similar Messages

ATI Radeon X1900 XT driver for MacPro

I put an ATI Radeon X1900 XT for MacPro in my 2 x 3 GHz MacPro. It displays only 1280 x 800 on my 30" Cinema. Do I need to install a driver, and if so, where to get the driver since card did not come with CD and AMD site has not posted a driver?
2 x 3 GHz MacPro Mac OS X (10.4.8)

zspike --
You don't need drivers -- they're built in to the OS. However, it would be nice to use the ATi displays panel, so you can turn on various app-specific speed settings and features like full-screen antialiasing.
Now, version 4.5.9 of ATi Displays is a Universal Binary, but ATi in their infinite wisdom have made it so that it WILL NOT install on a Mac Pro, only a G5.
But there's a way around this:
http://forum.macbidouille.com/index.php?showtopic=199963
Have a look at post No. 8. Simply put the displays.app in your /Applications/Utilities folder, and run it from there. Runs no problem. I couldn't get the Prefs Pane to work, but all that does is launch the Displays.app
Have fun!

ATI Radeon X1900 XT only for MacPro?

I Just noticed this this morning at Apple's Online Store ( US )
"ATI Radeon X1900 XT Graphics Upgrade Kit US$ 399.00"
I wonder if this will work in the G5 with Dual Cores ( and Quad ) PCIe ?

Ok thanks Jewell, What a Bugger eh?
X800XT for PCI-X G5's and ATI Radeon X1900 XT for MacPro's and nothing for the PCI-E last generation G5's! (unless you BTO).
I have seen your posts here about the lack of video card upgrades for the Quad, and I feel for you ... it's got to be exasperating !!
It will not unfortunately. Its to do with the way
video cards are recognised by the host system and the
x1900 is for MacPro only.
However.
Joe Schorr has confirmed in these forums that ATI
will be releasing a dual-core G5 edition of the x1900
(?) card which would finally make this Apple's first
video upgrade card since the dual-core G5 (quads)
were launched in October 05. Way to go Apple...
I read your repost of it.
-Robert

ATI Radeon X1900 worth it for only FCP and Color?

Hello,
I've been looking around these posts for a while and I can't seem to find this specific answer, so I apologize if my question has been asked already.
I am looking to purchase a MacPro tower. I don't use Motion. I don't play video games. I don't need 8 zillion giant monitors. I intend to use the computer mainly for Final Cut Pro 6.0 and probably a fair amount of Color as well.
With this being the case, what are the benefits of the
ATI Radeon X1900 XT 512MB Graphics Card, over the
NVIDIA GeForce 7300 GT 256MB Graphics Card? Is it really worth the money? I've seen some posts that say you won't see a difference in FCP, but is this also true for Color? And if so, what exactly will the difference be?
Thanks,

Here's what they said at the Color board...
With anything less than an ATI x1900...you may experience issues such as lack of realtime playback, missing support for 10-bit images and 2K frame sizes, no float support for your grade settings.
For this version of Color, ATI is the way to go. I wouldn't go so far as to say an Nvidia card gives you a crippled version of the program, but it's close.
http://discussions.apple.com/thread.jspa?messageID=4611284&#4611284
http://discussions.apple.com/thread.jspa?messageID=4672792&#4672792
http://discussions.apple.com/thread.jspa?messageID=4620097&#4620097

Leopard ATI Radeon X1900 XT Freezing Issue, fixed with 10.5.2?

Mac Pro (8-core) original 3.0Ghz 8 core. Purchased October 2007. Ran Tiger 10.4.10 from the box. updated to 10.4.11. ATI Firmware update was not required as it was pre-installed. Never had a crash. Installed Leopard 2 days after release. Installed 10.5.1 the day of release. No problems so far...
A week later watching the "Jelly" iTunes Visualizer, the Screen froze, but iTunes kept playing... The machine was reachable over SSH but very much useless as a reboot command hung. Hard reset, went about my business. A day later unit froze during iTunes Jelly Visualizer again. this time music also crashed. As I approached to reboot the unit noticed very loud video card fan noise. Extracted the burning hot card, later compress air removed some clogging dust bunnies. Reinstalled card and no more freezes for 2 weeks. Freezes again, this time watching youtube in Safari. Made sure data backup is up to date. Performed an Archive and Install of leopard, ran all updates to 10.5.1. This time Mac Pro was fine for a week .... *Freeze*.
Called apple care, after having to explain to a rep what itunes visualizer was, referred to iPod specialist, who transfered me to Mac Pro specialist, 1 hour later, thoroughly explain issues to rep, who after 45 minutes was convinced issue with HW and not SW . Apple sends Do It Yourself repair video card. I replaced it. 4 days later unit Froze again. This time watching movie on VLC...
A week later 10.5.2 was released, and shortly thereafter Leopard Graphics Update 1. So far **nervously knock on wood** no more freezes. I am hoping that whatever black magic was included in these recent updates fixes the Leopard crashes with ATI Radeon X1900 XT. Needless to say this is the last ATI Radeon I "buy".
I need to know and track other users findings issues and experience with Leopard and the ATI Radeon X1900 XT on a Mac Pro. Been reading about a lot of issues with Leopard and the ATI Radeon X1900 XT on the these boards. Google turns up info galore. ...
I am holding my breath

Spoke too soon. Today as I was leaving the house I set the Mac Pro to sleep. When I attempted to wake the machine upon return, display 1 became all garbled. Display 2 was still visible and the mouse moved, but I was not able to click any windows. I ssh'd in with my macbookpro and was able to do a "sudo reboot". In the process it got stuck and in a loop I received:
Feb 17 16:02:37 octagon kernel[0]: ** ASIC Hang Log End **
Feb 17 16:02:38 octagon kernel[0]: ATIRadeon::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 0, need 5. RBBM_STATUS 0x9001c100
Feb 17 16:02:50 octagon kernel[0]: ** ASIC Hang Log Start **
Feb 17 16:02:35 octagon kernel[0]: 860:0x02090000
Feb 17 16:02:35 octagon kernel[0]: 861:0x00002808
Feb 17 16:02:35 octagon kernel[0]: 862:0x00020004
Feb 17 16:02:35 octagon kernel[0]: 863:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 864:0x00840000
Feb 17 16:02:35 octagon kernel[0]: 865:0x00008020
Feb 17 16:02:35 octagon kernel[0]: 866:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 867:0x0a040000
Feb 17 16:02:35 octagon kernel[0]: 868:0x00010000
Feb 17 16:02:35 octagon kernel[0]: 869:0x00002808
Feb 17 16:02:35 octagon kernel[0]: 870:0x00020004
Feb 17 16:02:35 octagon kernel[0]: 871:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 872:0x00040000
Feb 17 16:02:35 octagon kernel[0]: 873:0x00008024
Feb 17 16:02:35 octagon kernel[0]: 874:0x00100100
Feb 17 16:02:35 octagon kernel[0]: 875:0x0a040000
Feb 17 16:02:35 octagon kernel[0]: 876:0x02090000
Feb 17 16:02:35 octagon kernel[0]: 877:0x00002808
Feb 17 16:02:35 octagon kernel[0]: 878:0x00020004
Feb 17 16:02:35 octagon kernel[0]: 879:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 880:0x00840000
Feb 17 16:02:35 octagon kernel[0]: 881:0x00009020
Feb 17 16:02:35 octagon kernel[0]: 882:0x00100000
Feb 17 16:02:35 octagon kernel[0]: 883:0x0a040000
Feb 17 16:02:35 octagon kernel[0]: 884:0x02090000
Feb 17 16:02:36 octagon kernel[0]: 885:0x00002808
Feb 17 16:02:36 octagon kernel[0]: 886:0x00020004
Feb 17 16:02:36 octagon kernel[0]: 887:0x00100000
Feb 17 16:02:36 octagon kernel[0]: 888:0x00840100
Needless to say I had to hard reset....

PowerMac G5 (not Mac Pro) with Radeon X1900 Xt locks after Leopard install

have a PowerMac G5 (not a MacPro) with an ATI Radeon X1900 XT (w/256 RAM). After installing Leopard, my system crashes regularly, especially after the screen saver kicks in. I also see blue horizontal lines on any display connected to the card. The original Gforce 6600LE remains stable.
I see all this jabber about the upgrade for the XT card if you are using a MacPro. My card is not THAT card. It was specifically recommended by ATI as being G5 compatible.
So now I think I may back off of Leopard and go back to 10.4.whatever unless someone can tell me how to get past this unacceptable performance. Apple support has been no help at all.
Anybody...???
Vfalzone

Saw two updates pass by in the last two days: 10.5.2 and another 'Graphic Upgrade'. I mistakenly thought the problems would be corrected. No dice. Still get horizontal lines on any monitor connected to the X1900 Xt card.
Not too many cards I can get for this box that have dual DVI ports. SO much for my $250+ CARD and Leopard!
This really *****.

ATI RADEON X1900 XT Bad resolution display with SNOW LEOPARD

Hi all!!
I just install a clean version of snow leopard 10.6.2 on my mac pro and everything works good.
Only problem I have, less resolution choice.
I am stuck with 1600x1200 60 Hz but before I was in 1600x1024 76hz.
This mac has a ATI RADEON X1900 XT graphic card.
I try on different mac pro with geforce and the resolution display is good.
It is not the problem of the graphic distorsion in top site of safari,
It's totally in the display.
Thank you!
BP

I use the same video card without any difficulty, under 10.6.2, in an older MacPro. If your card works OK in Leopard, then it's not likely to be a hardware problem. If it happens in Leopard, too, then a hardware failure is possible.
If this happened to me I'd clean the card's contacts, make sure that its supplemental power connection was tight on both ends, and re-install the card.
If the problem remained, I'd try the card in a different slot. If it persisted, I'd do a clean-install on a different drive and boot from it. If the problem recurred with a clean-installed second boot drive, then I'd suspect a hardware problem on the card or, less likely, on the logic board.
At this point I'd visually inspect the "GPU PRESENT" LED on the logic board, under the memory cage, next to PCI slot 1. As you use something completely non-conductive to press the "DIAG LED" button, which is adjacent to the diagnostic LEDs, see if the "GPU_PRESENT" LED comes on. If that LED stays off, it means the machine's EFI (extensible firmware interface) was unable to configure the graphics card, which would indicate a hardware problem on the graphics card, or possibly on the logic board. If the diagnostic LED comes on, it means EFI could configure the card. This does not necessarily mean that the card is functioning properly. The LED staying off, however, would strongly suggest some kind of a hardware problem.
If you have access to another graphics card, see if a similar problem occurs using it. Short of a thorough circuit-check in a shop, that's the only practical way to determine if it's a PCI card or logic board problem. Either way, there'd be a hardware repair/replacement on the horizon.
Message was edited by: Hominahomina

What is a good replacement for the ATI Radeon X1900 XT on a late 2007 Mac Pro

I recently took my late 2007 Mac Pro to the Apple Store because it was running quite loud. They diagnosed the problem as the fan on the ATI Radeon x1900 XT video card. Whie the card works fine otherwise, I was thinking of replacing it. I noticed some online recommendations that I need to upgrade to perhaps the Radeo HD 4870 if I want to install FCP X on this machine. I do use the Mac Pro for video editing, but haven't switched yet to FCP X. Anyone have a suggestion on a replcement video card that will work both on this machine and will be compatible with FCP X.
Thanks for any advice.

<http://store.apple.com/us/product/MC742ZM/A/ati-radeon-hd-5770-graphics-upgrade- kit-for-mac-pro-(mid-2010)>

Upgrade MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. to recommended system requirements for heli simulator: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB.

I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

Need Power Connector Cable for ATI Radeon X1900 XT

I need the 6pin power connector/cable for my ATI Radeon X1900 XT to work with my Mac Pro.
I can't use the card as I lost the small cable pior to installation and now I can't find one anywhere.
It is the 6 pin cable that connects into the Radeon X1900 XT and the other end into the Mac Pro motherboard.
Can someone help me?
Thank you

Worst service ever at the local(Canada) Montreal/Laval Apple Store........''go ask ATI or call Apple, etc....''
that was helpfull
I go to Apple because it is an Apple card and I get service like I was asking for a PC.
Typical of Apple, you buy their stuff then they turn your back on you in case that you need some help.

ATI Radeon X1900 XT 512 MB graphics card has failed?

I think my ATI Radeon X1900 XT 512 MB graphics card has failed...
This is a MacPro 1,1 (2006). We're on our yacht in a French territory, South Pacific, so local support is non-obtainium. I would appreciate any advice on how I can confirm my graphics card is dead.
I have only 23" Apple Cinema Display for testing. The display works great on MBP, so that end is good.
The MacPro seems to boot normally - AFAIK based on startup sounds, fan, RAM LED diagnostic lights.
Suggestions?

Case A) the screen goes blank at the login screen
invoke Safe Mode (hold down the Shift key at Startup).
This performs a five minutes or so Disk Utility ( Repair Disk) on the boot drive, then demands your userId and password, even if you normally auto-login.
Safe Mode only loads the absolutely essential Drivers, and the graphics drivers are not considered essential. So screen re-draw may be slow, but you can check your email, surf a little, do many operations that do not require graphics acceleration.
Edit movies? Probably not.
Case B) your screen completely blank
If the power-on light flashes in a pattern, that indicates not enough good RAM to start up.
If no power light flashing, you need some function you can invoke that will show a non-graphics result.
The Caps Lock light on the keyboard is under software Control. If it works, at least the SMC controller that talks to the keyboard is working.
Holding down Control while pressing the Eject key on the keyboard brings up this familiar dialog box, whether you can see it or not:
any key except:
R for Restart;
S for Sleep;
Esc for cancel;
and return for the default Shut Down
should cause the System Beep sound. S should Sleep it, and the power light should shortly indicate that it is sleeping. Any key will then wake it up.

Nvidia GeForce 7300 GT and ATI Radeon X1900 XT

I have a Mac Pro 2,1 running 10.6.1 and BootCamp.
I had a Nvidia GeForce 7300 GT video card in it and it ran well under BootCamp.
I installed a ATI Radeon X1900 XT.
Under BootCamp the 2 cards seem incompatible, with an error message that the driver on the Nvidia card has been disables due to an incompatibility with the other card.
Is there a solution for this?
If I wanted 2 cards inside would they both need to be the ATI's or Nvidia's?
Thanks

Hi I would maybe get a Apple Upgrade Kit the GT 120 is 512MB's & dose not use all 16 lanes as it like to make you think & will work on 2006 Mac Pro's at $149.00 I would say if you just want more displays get two & eBay your old cards. Please know if you game you will want more power but if only for more displays this 1 slot card is great.
NVIDIA GeForce GT 120 Graphics Upgrade Kit for Mac Pro (early 2009)
View all Questions
It as well as the much better 4870 both work with the Mac Pro 1,1 & 2,1
NVIDIA GeForce GT 120 Graphics Upgrade Kit for Mac Pro (early 2009)
The NVIDIA GeForce GT 120 includes 512MB of GDDR3 memory, uses the PCI Express 2.0 interface, and includes one Mini DisplayPort and one dual-link DVI port.
Learn more Questions & Answers
2 Questions + 2 Answers
Based on 11 reviews
Write a review
$149.00
Ships: Within 24hrs
Free Shipping
Overview
The NVIDIA GeForce GT 120 with 512 MB of GDDR3 memory delivers excellent all-around performance whether your playing games or dealing with creative and scientific applications. With up to four NVIDIA GeForce GT 120 graphics cards installed, a Mac Pro can support up to eight displays simultaneously.
NVIDIA GeForce GT 120 includes two video ports: one Mini DisplayPort and one dual-link DVI port. This allows you to connect both the 24-inch Apple LED Cinema Display or another Mini DisplayPort-based display, and a DVI-based display such as the 30-inch Apple Cinema HD Display. Display adapters are available to connect VGA displays.
Good Luck man
Thomas

NVIDIA GeForce 120 or ATI Radeon X1900... which is better?

Hi-
I currently have the ATI Radeon X1900 graphics card installed in my Mac Pro 2.26 Nehalem. I'm not having any issue's with the card except that the fans turn On quite frequently, and they're a little loud.
I'm not using it for any games, etc... My primary use is with Pro Tools (a music DAW application).
The ATI Radeon X1900 is running a Apple 30" display and a Sony Bravia 46" LCD.
If I replaced the ATI Radeon X1900 with a NVIDIA GeForce 120, would I be asking for trouble?
Thanks in advance.

If I replaced the ATI Radeon X1900 with a NVIDIA GeForce 120, would I be asking for trouble?
If your Mac Pro came with ATI Radeon X1900, then it needs a card with EFI-32 firmware. The NVIDIA GeForce 120 has EFI-64 firmware, and won't work in the pre 2008 Mac Pro. The only upgrade for early Mac Pros is the ATI Radeon HD 4870
<http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=MTA4MzU2NTc>
(Despite what Apple says, it will work in any Mac Pro.)
You will need a Mini DisplayPort adapter for the second display,

After Effects 7 with ATI Radeon X1900 XT

Hi everyone,
I use Adobe After Effects 7 a lot and I'm not happy with my current machine (PowerPC G5 2x1.8GHZ, 2GB DDR SDRAM, ATI Radeon X800 XT), it is too slow to work smoothly when I have several layers and effects going on. Previewing the work on the timeline (OpenGL or Adaptative resolution) is painfully slow and takes on my nerves. I believe this is mainly due to my graphics card, and the fact is not 100% compatible with OpenGL on After effects.
I'm ready to upgrade with a Mac Pro 2.66 GHz Quad Xeon with ATI Radeon X1900 XT, but only if I'm going to enjoy a real improve with After Effects 7, as this is my main editing application right now.
Does anybody have experience with this configuration?
Thanks in advance for reading and replies!
PowerPC G5 2x1.8GHZ Mac OS X (10.4.7) 2GB DDR SDRAM, ATI Radeon X800 XT

I have this configuration, but sadly have had no time to play around with After Effects. AE's realtime playback capabilities are limited (especially when compared with something like Motion), so you're probably still going to be rendering to RAM a lot. I believe the OpenGL support is for things like anti-aliasing, blur, and blending modes -- so a faster video card may not automatically equal huge performance boost across the board. Four Xeon cores and a lot of RAM will help it a lot more (see exception below).
Also, AE 7 still has to run under Rosetta which results in a slower performance than if it was native. Also, be aware that there is a limit placed on all Rosetta processes that do not allow them to address more than 1.5GB of RAM combined. This will most likely limit your render speed and preview lengths. See this thread on Adobe's forums for more info:
http://www.creativecow.net/articles/jonesgraham/AE7_on_IntelMacPro/index.html
EDIT: The above link was to the performance comparisons, but not the original Adobe forum thread. Here it is:
http://www.adobeforums.com/cgi-bin/webx/.3bc2401b
However, if you read the thread, and follow the link in it, the author is seeing huge performance gains with AE7 on his MacPro 3GBs over his old dual G5 4.5GBs.
So most likely, you'll see a performance benefit from upgrading. And when an Intel native version of AE ships, things will really fly.

Brandnew 8-core MacPro and ATI Radeon X1900 xt

I had this quadcore MacPro with an ATI Radeon X1900 XT and now I am switching to a newer octo-core MacPro.
I managed to install the card into the computer case. But alas, i don't see anything on my screen...
System Profiler discovers the card but gives it an generic name "Display" with Vendor ATI and DeviceID 0x7249.
But no "displays" found attached to it, which is b.s.
Please please don't tell me i cannot use this graphics card in the octo-core MacPro?!

I am surprised .... I don't have (any ideas), so I don't know for sure
You know, that doesn't help or further things and puts out false ideas that there even might. Then I'll hear "but I read somewhere something."
Apple changed the firmware on 2008. That is well known and pretty obvious, and graphic cards have to follow suit.
Nvidia doesn't seem to know or follow ATI's path of using a "hybred" (for want of better term) EFD? ROM that works across EFI32 and EFI64. Been explained over and over, or if not explained, given as cause to why.
At least we have a few years before EFI128!
NVidia GeForce 7400 gfx card
Now that is very elusive.
The 7300GT works only in 2006-7 Mac Pro, which were dual processor / dual or quad-core, but all used EFI32; 667MHz FBDIMM; had 1333MHz front side bus; PCIe 1.0/1.1 (but not PCIe 2.0 that came out in 2008).
And with brand new 2009, DDR3, you graphic option is really between GTX 285 and ATI HD 4870 - forget the GT120 even as a viable option for most.

ATI Radeon X1900 Xt Drivers for Leopard not yet provided

Similar Messages

Maybe you are looking for