Ati radeon xpress 200 series driver installing windows 8.1 pro black screen
dell optiplex 320 running Windows 8.1 standard. The display is listed as ATI RADEON XPREES 200 in the device manager.
It is using the driver provided by the operating system - ATI Technologies dated 10/2/2010 and version 10-2_legacy_vista32-64_dd_ccc and ATI_ATI-Radeon-Xpress-X1100_A03_R172873. From a cold boot the blue Windows logo appears and then the mouse cursor
in the middle of the screen, but the start screen with the tiles is not displayed. Maybe this sounds weird, but I think the start screen and tiles is there, but just not being shown on the screen. There appears to be nothing there, but I can move
the cursor around on the black screen and click in frustration. Then I press the power button and the laptop enters sleep mode. Once in sleep mode I press power again to resume the computer and then the lock screen shows up and I can see the start
screen and tiles and everything works like it should. This only happens from a cold boot. If the computer was on and restarted it does not happen. Has this happened to anyone else? Any suggestions? I will check for a newer display
driver from ATI. The only driver on the Windows Update Catalog is for Windows Vista.
mouse cursor in the middle of the screen, but the start screen with the tiles is not displayed.
Usually it is nVidia users who complain of this. An explanation would be that you are seeing your secondary monitor display in an Extended display configuration. When you press Win- etc. it would show on your primary monitor (which you can't
see). So, press Win-P anyway and imagine that you can see its display. Then you would press CursorUp, Enter and switch display configurations so you could see something.
only happens from a cold boot.
Then there is a feature in a boot that makes this change. Try using Win-P again when you can see it to see what the configuration is then.
Robert Aldwinckle
Similar Messages
-
AMD Radeon HD 7600M Series Driver for windows 7 x64
Hi everybody,
I have an
HP Pavilion g6-2297se Notebook PC
and Iim going to reinstalled on it Windows 7 Ultimate (64bit). Thanks to this forum I have found all the drivers that I need except the drivers for AMD Radeon HD 7600M Series.
and I'd like to know the best order for install driverse on the system
Can someone help me?Hi:
You can use all of the W7 x64 drivers and software from the g6t-2000 on yours.
DO NOT USE ANY BIOS OR FIRMWARE FILES FROM THIS MODEL
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5278...
Recommended order of installation for the first 4:
1. Intel chipset installation utility and reboot.
2. AMD graphics driver and reboot. Note: This installs the drivers for both the AMD and Intel GPU's.
3. IDT Audio driver and reboot.
4. Realtek ethernet driver and reboot.
Then you can install whatever else you need in any order you want. -
ATI Radeon 9000 IGP Mobile driver doesn't have hardware acceleration
I installed the xf86-video-ati package and I don't get hardware acceleration. Glxgears gives a painful 80 FPS rate and nothing 3D intensive works, neither 480p/720p youtube videos. Also, it seems that the current drivers identify the card as 9100 instead of 9000, but I know that it's 9000 for sure. The laptop that I'm running is an old one, Compaq Presario R3000 with the Intel CPU.
X.org.0.log
[ 25.819]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 25.819] X Protocol Version 11, Revision 0
[ 25.819] Build Operating System: Linux 2.6.38-ARCH i686
[ 25.819] Current Operating System: Linux localhost 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011 i686
[ 25.820] Kernel command line: root=/dev/sda1 ro
[ 25.820] Build Date: 16 April 2011 12:05:35PM
[ 25.820]
[ 25.841] Current version of pixman: 0.20.2
[ 25.841] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.841] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.841] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 20 00:29:04 2011
[ 25.913] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 25.948] (==) No Layout section. Using the first Screen section.
[ 25.948] (==) No screen section available. Using defaults.
[ 25.948] (**) |-->Screen "Default Screen Section" (0)
[ 25.948] (**) | |-->Monitor "<default monitor>"
[ 25.949] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 25.949] (==) Automatically adding devices
[ 25.949] (==) Automatically enabling devices
[ 25.998] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 25.998] Entry deleted from font path.
[ 26.073] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 26.073] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.073] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.073] (II) Loader magic: 0x81f4ee0
[ 26.073] (II) Module ABI versions:
[ 26.073] X.Org ANSI C Emulation: 0.4
[ 26.073] X.Org Video Driver: 10.0
[ 26.073] X.Org XInput driver : 12.2
[ 26.073] X.Org Server Extension : 5.0
[ 26.074] (--) PCI:*(0:1:5:0) 1002:5835:103c:006b rev 0, Mem @ 0xe0000000/268435456, 0xd0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 26.075] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 26.075] (II) LoadModule: "extmod"
[ 26.079] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 26.094] (II) Module extmod: vendor="X.Org Foundation"
[ 26.095] compiled for 1.10.1, module version = 1.0.0
[ 26.095] Module class: X.Org Server Extension
[ 26.095] ABI class: X.Org Server Extension, version 5.0
[ 26.095] (II) Loading extension MIT-SCREEN-SAVER
[ 26.095] (II) Loading extension XFree86-VidModeExtension
[ 26.095] (II) Loading extension XFree86-DGA
[ 26.095] (II) Loading extension DPMS
[ 26.095] (II) Loading extension XVideo
[ 26.095] (II) Loading extension XVideo-MotionCompensation
[ 26.095] (II) Loading extension X-Resource
[ 26.095] (II) LoadModule: "dbe"
[ 26.095] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 26.097] (II) Module dbe: vendor="X.Org Foundation"
[ 26.097] compiled for 1.10.1, module version = 1.0.0
[ 26.097] Module class: X.Org Server Extension
[ 26.097] ABI class: X.Org Server Extension, version 5.0
[ 26.097] (II) Loading extension DOUBLE-BUFFER
[ 26.097] (II) LoadModule: "glx"
[ 26.097] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.111] (II) Module glx: vendor="X.Org Foundation"
[ 26.111] compiled for 1.10.1, module version = 1.0.0
[ 26.111] ABI class: X.Org Server Extension, version 5.0
[ 26.116] (==) AIGLX enabled
[ 26.116] (II) Loading extension GLX
[ 26.116] (II) LoadModule: "record"
[ 26.116] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 26.117] (II) Module record: vendor="X.Org Foundation"
[ 26.117] compiled for 1.10.1, module version = 1.13.0
[ 26.117] Module class: X.Org Server Extension
[ 26.117] ABI class: X.Org Server Extension, version 5.0
[ 26.117] (II) Loading extension RECORD
[ 26.117] (II) LoadModule: "dri"
[ 26.117] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 26.147] (II) Module dri: vendor="X.Org Foundation"
[ 26.147] compiled for 1.10.1, module version = 1.0.0
[ 26.147] ABI class: X.Org Server Extension, version 5.0
[ 26.147] (II) Loading extension XFree86-DRI
[ 26.147] (II) LoadModule: "dri2"
[ 26.147] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 26.148] (II) Module dri2: vendor="X.Org Foundation"
[ 26.148] compiled for 1.10.1, module version = 1.2.0
[ 26.148] ABI class: X.Org Server Extension, version 5.0
[ 26.148] (II) Loading extension DRI2
[ 26.148] (==) Matched ati as autoconfigured driver 0
[ 26.148] (==) Matched vesa as autoconfigured driver 1
[ 26.148] (==) Matched fbdev as autoconfigured driver 2
[ 26.148] (==) Assigned the driver to the xf86ConfigLayout
[ 26.148] (II) LoadModule: "ati"
[ 26.149] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 26.165] (II) Module ati: vendor="X.Org Foundation"
[ 26.165] compiled for 1.10.1, module version = 6.14.99
[ 26.165] Module class: X.Org Video Driver
[ 26.165] ABI class: X.Org Video Driver, version 10.0
[ 26.165] (II) LoadModule: "radeon"
[ 26.166] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 26.235] (II) Module radeon: vendor="X.Org Foundation"
[ 26.235] compiled for 1.10.1, module version = 6.14.99
[ 26.235] Module class: X.Org Video Driver
[ 26.235] ABI class: X.Org Video Driver, version 10.0
[ 26.236] (II) LoadModule: "vesa"
[ 26.237] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 26.250] (II) Module vesa: vendor="X.Org Foundation"
[ 26.250] compiled for 1.10.0, module version = 2.3.0
[ 26.250] Module class: X.Org Video Driver
[ 26.250] ABI class: X.Org Video Driver, version 10.0
[ 26.250] (II) LoadModule: "fbdev"
[ 26.250] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 26.269] (II) Module fbdev: vendor="X.Org Foundation"
[ 26.269] compiled for 1.10.0, module version = 0.4.2
[ 26.269] ABI class: X.Org Video Driver, version 10.0
[ 26.269] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS
[ 26.278] (II) VESA: driver for VESA chipsets: vesa
[ 26.278] (II) FBDEV: driver for framebuffer: fbdev
[ 26.278] (++) using VT number 7
[ 26.303] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 26.303] (II) [KMS] Kernel modesetting enabled.
[ 26.303] (WW) Falling back to old probe method for vesa
[ 26.303] (WW) Falling back to old probe method for fbdev
[ 26.303] (II) Loading sub module "fbdevhw"
[ 26.303] (II) LoadModule: "fbdevhw"
[ 26.303] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 26.304] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 26.304] compiled for 1.10.1, module version = 0.0.2
[ 26.304] ABI class: X.Org Video Driver, version 10.0
[ 26.304] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 26.304] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 26.304] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 26.304] (==) RADEON(0): Default visual is TrueColor
[ 26.304] (==) RADEON(0): RGB weight 888
[ 26.304] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 26.304] (--) RADEON(0): Chipset: "ATI Radeon Mobility 9100 IGP (U3) 5835" (ChipID = 0x5835)
[ 26.304] (II) RADEON(0): AGP card detected
[ 26.304] drmOpenDevice: node name is /dev/dri/card0
[ 26.305] drmOpenDevice: open result is 8, (OK)
[ 26.305] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 26.305] drmOpenDevice: node name is /dev/dri/card0
[ 26.305] drmOpenDevice: open result is 8, (OK)
[ 26.305] drmOpenByBusid: drmOpenMinor returns 8
[ 26.305] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 26.305] (II) Loading sub module "exa"
[ 26.305] (II) LoadModule: "exa"
[ 26.305] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 26.306] (II) Module exa: vendor="X.Org Foundation"
[ 26.306] compiled for 1.10.1, module version = 2.5.0
[ 26.307] ABI class: X.Org Video Driver, version 10.0
[ 26.307] (II) RADEON(0): KMS Color Tiling: disabled
[ 26.307] (II) RADEON(0): KMS Pageflipping: enabled
[ 26.307] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 26.338] (II) RADEON(0): Output VGA-0 has no monitor section
[ 26.338] (II) RADEON(0): Output LVDS has no monitor section
[ 26.344] (II) RADEON(0): Output S-video has no monitor section
[ 26.368] (II) RADEON(0): EDID for output VGA-0
[ 26.369] (II) RADEON(0): EDID for output LVDS
[ 26.369] (II) RADEON(0): Printing probed modes for output LVDS
[ 26.369] (II) RADEON(0): Modeline "1280x800"x60.0 68.90 1280 1296 1328 1408 800 804 808 816 (48.9 kHz)
[ 26.369] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 26.369] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 26.369] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 26.369] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 26.369] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 26.369] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 26.369] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 26.375] (II) RADEON(0): EDID for output S-video
[ 26.375] (II) RADEON(0): Output VGA-0 disconnected
[ 26.375] (II) RADEON(0): Output LVDS connected
[ 26.375] (II) RADEON(0): Output S-video disconnected
[ 26.375] (II) RADEON(0): Using exact sizes for initial modes
[ 26.375] (II) RADEON(0): Output LVDS using initial mode 1280x800
[ 26.375] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.375] (II) RADEON(0): mem size init: gart size :1dff000 vram size: s:8000000 visible:7bd8000
[ 26.375] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 26.375] (==) RADEON(0): DPI set to (96, 96)
[ 26.375] (II) Loading sub module "fb"
[ 26.375] (II) LoadModule: "fb"
[ 26.375] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.419] (II) Module fb: vendor="X.Org Foundation"
[ 26.419] compiled for 1.10.1, module version = 1.0.0
[ 26.419] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.419] (II) Loading sub module "ramdac"
[ 26.419] (II) LoadModule: "ramdac"
[ 26.419] (II) Module "ramdac" already built-in
[ 26.419] (II) UnloadModule: "vesa"
[ 26.419] (II) Unloading vesa
[ 26.419] (II) UnloadModule: "fbdev"
[ 26.419] (II) Unloading fbdev
[ 26.419] (II) UnloadModule: "fbdevhw"
[ 26.419] (II) Unloading fbdevhw
[ 26.419] (--) Depth 24 pixmap format is 32 bpp
[ 26.420] (II) RADEON(0): [DRI2] Setup complete
[ 26.420] (II) RADEON(0): [DRI2] DRI driver: r200
[ 26.420] (II) RADEON(0): Front buffer size: 4000K
[ 26.420] (II) RADEON(0): VRAM usage limit set to 110534K
[ 26.451] (==) RADEON(0): Backing store disabled
[ 26.451] (II) RADEON(0): Direct rendering enabled
[ 26.470] (II) RADEON(0): Render acceleration enabled for R200 type cards.
[ 26.470] (II) RADEON(0): Setting EXA maxPitchBytes
[ 26.470] (II) EXA(0): Driver allocated offscreen pixmaps
[ 26.470] (II) EXA(0): Driver registered support for the following operations:
[ 26.470] (II) Solid
[ 26.470] (II) Copy
[ 26.470] (II) Composite (RENDER acceleration)
[ 26.470] (II) UploadToScreen
[ 26.470] (II) DownloadFromScreen
[ 26.471] (II) RADEON(0): Acceleration enabled
[ 26.471] (==) RADEON(0): DPMS enabled
[ 26.471] (==) RADEON(0): Silken mouse enabled
[ 26.490] (II) RADEON(0): Set up textured video
[ 26.490] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.490] (--) RandR disabled
[ 26.490] (II) Initializing built-in extension Generic Event Extension
[ 26.490] (II) Initializing built-in extension SHAPE
[ 26.490] (II) Initializing built-in extension MIT-SHM
[ 26.490] (II) Initializing built-in extension XInputExtension
[ 26.490] (II) Initializing built-in extension XTEST
[ 26.490] (II) Initializing built-in extension BIG-REQUESTS
[ 26.490] (II) Initializing built-in extension SYNC
[ 26.490] (II) Initializing built-in extension XKEYBOARD
[ 26.490] (II) Initializing built-in extension XC-MISC
[ 26.490] (II) Initializing built-in extension SECURITY
[ 26.490] (II) Initializing built-in extension XINERAMA
[ 26.490] (II) Initializing built-in extension XFIXES
[ 26.490] (II) Initializing built-in extension RENDER
[ 26.490] (II) Initializing built-in extension RANDR
[ 26.490] (II) Initializing built-in extension COMPOSITE
[ 26.490] (II) Initializing built-in extension DAMAGE
[ 26.598] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 26.598] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 26.598] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 26.598] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 26.598] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 26.599] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r200_dri.so
[ 26.599] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 26.600] (II) RADEON(0): Setting screen physical size to 338 x 211
[ 27.171] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 27.171] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.171] (II) LoadModule: "evdev"
[ 27.199] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.216] (II) Module evdev: vendor="X.Org Foundation"
[ 27.216] compiled for 1.10.0, module version = 2.6.0
[ 27.216] Module class: X.Org XInput Driver
[ 27.216] ABI class: X.Org XInput driver, version 12.2
[ 27.216] (II) Using input driver 'evdev' for 'Power Button'
[ 27.216] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.217] (**) Power Button: always reports core events
[ 27.217] (**) Power Button: Device: "/dev/input/event5"
[ 27.240] (--) Power Button: Found keys
[ 27.240] (II) Power Button: Configuring as keyboard
[ 27.240] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 27.240] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 27.240] (**) Option "xkb_rules" "evdev"
[ 27.240] (**) Option "xkb_model" "evdev"
[ 27.240] (**) Option "xkb_layout" "us"
[ 27.274] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 27.274] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27.274] (II) Using input driver 'evdev' for 'Video Bus'
[ 27.274] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.275] (**) Video Bus: always reports core events
[ 27.275] (**) Video Bus: Device: "/dev/input/event2"
[ 27.286] (--) Video Bus: Found keys
[ 27.286] (II) Video Bus: Configuring as keyboard
[ 27.286] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3/event2"
[ 27.286] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 27.286] (**) Option "xkb_rules" "evdev"
[ 27.286] (**) Option "xkb_model" "evdev"
[ 27.286] (**) Option "xkb_layout" "us"
[ 27.397] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 27.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.397] (II) Using input driver 'evdev' for 'Power Button'
[ 27.398] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.398] (**) Power Button: always reports core events
[ 27.398] (**) Power Button: Device: "/dev/input/event4"
[ 27.413] (--) Power Button: Found keys
[ 27.413] (II) Power Button: Configuring as keyboard
[ 27.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event4"
[ 27.413] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 27.413] (**) Option "xkb_rules" "evdev"
[ 27.413] (**) Option "xkb_model" "evdev"
[ 27.413] (**) Option "xkb_layout" "us"
[ 27.414] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 27.414] (II) No input driver/identifier specified (ignoring)
[ 27.423] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event7)
[ 27.423] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 27.423] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 27.423] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.423] (**) USB OPTICAL MOUSE: always reports core events
[ 27.423] (**) USB OPTICAL MOUSE: Device: "/dev/input/event7"
[ 27.440] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 27.440] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 27.440] (--) USB OPTICAL MOUSE: Found relative axes
[ 27.440] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 27.440] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 27.440] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 27.440] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 27.440] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.440] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.4/0000:02:07.0/usb4/4-1/4-1:1.0/input/input8/event7"
[ 27.440] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE)
[ 27.440] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 27.440] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 27.440] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 27.440] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 27.440] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 27.441] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse1)
[ 27.441] (II) No input driver/identifier specified (ignoring)
[ 27.444] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 27.444] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.444] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27.444] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.444] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.444] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 27.460] (--) AT Translated Set 2 keyboard: Found keys
[ 27.460] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 27.460] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event0"
[ 27.460] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 27.460] (**) Option "xkb_rules" "evdev"
[ 27.460] (**) Option "xkb_model" "evdev"
[ 27.460] (**) Option "xkb_layout" "us"
[ 27.461] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event6)
[ 27.461] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 27.461] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 27.461] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.461] (**) PS/2 Generic Mouse: always reports core events
[ 27.461] (**) PS/2 Generic Mouse: Device: "/dev/input/event6"
[ 27.486] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 27.486] (--) PS/2 Generic Mouse: Found relative axes
[ 27.486] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 27.486] (II) PS/2 Generic Mouse: Configuring as mouse
[ 27.486] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 27.486] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.486] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event6"
[ 27.486] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[ 27.486] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 27.487] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 27.487] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 27.487] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 27.487] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 27.487] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 27.487] (II) No input driver/identifier specified (ignoring)
[ 27.488] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 27.488] (II) No input driver/identifier specified (ignoring)
kernel.log
Apr 20 00:27:00 localhost kernel: [Hardware Error]: Machine check events logged
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys cpuset
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys cpu
Apr 20 00:28:52 localhost kernel: Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011
Apr 20 00:28:52 localhost kernel: BIOS-provided physical RAM map:
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000000100000 - 0000000017f70000 (usable)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000017f70000 - 0000000017f7d000 (ACPI data)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000017f7d000 - 0000000017f80000 (ACPI NVS)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000017f80000 - 0000000018000000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 0000000027f80000 - 0000000028000000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Apr 20 00:28:52 localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Apr 20 00:28:52 localhost kernel: Notice: NX (Execute Disable) protection missing in CPU!
Apr 20 00:28:52 localhost kernel: DMI present.
Apr 20 00:28:52 localhost kernel: DMI: Hewlett-Packard Presario R3000 (PC777AV) /089C, BIOS F.45 04/06/2005
Apr 20 00:28:52 localhost kernel: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Apr 20 00:28:52 localhost kernel: e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Apr 20 00:28:52 localhost kernel: last_pfn = 0x17f70 max_arch_pfn = 0x100000
Apr 20 00:28:52 localhost kernel: MTRR default type: uncachable
Apr 20 00:28:52 localhost kernel: MTRR fixed ranges enabled:
Apr 20 00:28:52 localhost kernel: 00000-9FFFF write-back
Apr 20 00:28:52 localhost kernel: A0000-BFFFF uncachable
Apr 20 00:28:52 localhost kernel: C0000-CFFFF write-protect
Apr 20 00:28:52 localhost kernel: D0000-DFFFF uncachable
Apr 20 00:28:52 localhost kernel: E0000-FFFFF write-protect
Apr 20 00:28:52 localhost kernel: MTRR variable ranges enabled:
Apr 20 00:28:52 localhost kernel: 0 base 000000000 mask FF0000000 write-back
Apr 20 00:28:52 localhost kernel: 1 base 010000000 mask FF8000000 write-back
Apr 20 00:28:52 localhost kernel: 2 base 017F80000 mask FFFF80000 uncachable
Apr 20 00:28:52 localhost kernel: 3 base 027F80000 mask FFFF80000 uncachable
Apr 20 00:28:52 localhost kernel: 4 disabled
Apr 20 00:28:52 localhost kernel: 5 disabled
Apr 20 00:28:52 localhost kernel: 6 disabled
Apr 20 00:28:52 localhost kernel: 7 disabled
Apr 20 00:28:52 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Apr 20 00:28:52 localhost kernel: found SMP MP-table at [c00f6470] f6470
Apr 20 00:28:52 localhost kernel: initial memory mapped : 0 - 01800000
Apr 20 00:28:52 localhost kernel: init_memory_mapping: 0000000000000000-0000000017f70000
Apr 20 00:28:52 localhost kernel: 0000000000 - 0000400000 page 4k
Apr 20 00:28:52 localhost kernel: 0000400000 - 0017c00000 page 2M
Apr 20 00:28:52 localhost kernel: 0017c00000 - 0017f70000 page 4k
Apr 20 00:28:52 localhost kernel: kernel direct mapping tables up to 17f70000 @ 17fb000-1800000
Apr 20 00:28:52 localhost kernel: RAMDISK: 17dca000 - 17f60000
Apr 20 00:28:52 localhost kernel: ACPI: RSDP 000f6500 00014 (v00 PTLTD )
Apr 20 00:28:52 localhost kernel: ACPI: RSDT 17f79185 00030 (v01 PTLTD RSDT 06040000 LTP 00000000)
Apr 20 00:28:52 localhost kernel: ACPI: FACP 17f7ceed 00074 (v01 HP Chinook 06040000 ATI 000F4240)
Apr 20 00:28:52 localhost kernel: ACPI: DSDT 17f791b5 03D38 (v01 HP SB200 06040000 INTL 20030509)
Apr 20 00:28:52 localhost kernel: ACPI: FACS 17f7ffc0 00040
Apr 20 00:28:52 localhost kernel: ACPI: APIC 17f7cf61 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
Apr 20 00:28:52 localhost kernel: ACPI: SSDT 17f7cfc9 00037 (v01 PTLTD ACPIHT 06040000 LTP 00000001)
Apr 20 00:28:52 localhost kernel: ACPI: Local APIC address 0xfee00000
Apr 20 00:28:52 localhost kernel: 0MB HIGHMEM available.
Apr 20 00:28:52 localhost kernel: 383MB LOWMEM available.
Apr 20 00:28:52 localhost kernel: mapped low ram: 0 - 17f70000
Apr 20 00:28:52 localhost kernel: low ram: 0 - 17f70000
Apr 20 00:28:52 localhost kernel: Zone PFN ranges:
Apr 20 00:28:52 localhost kernel: DMA 0x00000010 -> 0x00001000
Apr 20 00:28:52 localhost kernel: Normal 0x00001000 -> 0x00017f70
Apr 20 00:28:52 localhost kernel: HighMem empty
Apr 20 00:28:52 localhost kernel: Movable zone start PFN for each node
Apr 20 00:28:52 localhost kernel: early_node_map[2] active PFN ranges
Apr 20 00:28:52 localhost kernel: 0: 0x00000010 -> 0x0000009f
Apr 20 00:28:52 localhost kernel: 0: 0x00000100 -> 0x00017f70
Apr 20 00:28:52 localhost kernel: On node 0 totalpages: 98047
Apr 20 00:28:52 localhost kernel: free_area_init_node: node 0, pgdat c1450b00, node_mem_map d7aca200
Apr 20 00:28:52 localhost kernel: DMA zone: 32 pages used for memmap
Apr 20 00:28:52 localhost kernel: DMA zone: 0 pages reserved
Apr 20 00:28:52 localhost kernel: DMA zone: 3951 pages, LIFO batch:0
Apr 20 00:28:52 localhost kernel: Normal zone: 735 pages used for memmap
Apr 20 00:28:52 localhost kernel: Normal zone: 93329 pages, LIFO batch:31
Apr 20 00:28:52 localhost kernel: Using APIC driver default
Apr 20 00:28:52 localhost kernel: ACPI: PM-Timer IO Port: 0x8008
Apr 20 00:28:52 localhost kernel: ACPI: Local APIC address 0xfee00000
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Apr 20 00:28:52 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Apr 20 00:28:52 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Apr 20 00:28:52 localhost kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Apr 20 00:28:52 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Apr 20 00:28:52 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Apr 20 00:28:52 localhost kernel: ACPI: IRQ0 used by override.
Apr 20 00:28:52 localhost kernel: ACPI: IRQ2 used by override.
Apr 20 00:28:52 localhost kernel: ACPI: IRQ9 used by override.
Apr 20 00:28:52 localhost kernel: Using ACPI (MADT) for SMP configuration information
Apr 20 00:28:52 localhost kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
Apr 20 00:28:52 localhost kernel: nr_irqs_gsi: 40
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
Apr 20 00:28:52 localhost kernel: PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Apr 20 00:28:52 localhost kernel: Allocating PCI resources starting at 28000000 (gap: 28000000:d6c00000)
Apr 20 00:28:52 localhost kernel: Booting paravirtualized kernel on bare hardware
Apr 20 00:28:52 localhost kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Apr 20 00:28:52 localhost kernel: PERCPU: Embedded 12 pages/cpu @d7400000 s27392 r0 d21760 u2097152
Apr 20 00:28:52 localhost kernel: pcpu-alloc: s27392 r0 d21760 u2097152 alloc=1*4194304
Apr 20 00:28:52 localhost kernel: pcpu-alloc: [0] 0 1
Apr 20 00:28:52 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97280
Apr 20 00:28:52 localhost kernel: Kernel command line: root=/dev/sda1 ro
Apr 20 00:28:52 localhost kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
Apr 20 00:28:52 localhost kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 20 00:28:52 localhost kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr 20 00:28:52 localhost kernel: Initializing CPU#0
Apr 20 00:28:52 localhost kernel: allocated 1962880 bytes of page_cgroup
Apr 20 00:28:52 localhost kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Apr 20 00:28:52 localhost kernel: Initializing HighMem for node 0 (00000000:00000000)
Apr 20 00:28:52 localhost kernel: Memory: 379216k/392640k available (3182k kernel code, 12972k reserved, 1260k data, 424k init, 0k highmem)
Apr 20 00:28:52 localhost kernel: virtual kernel memory layout:
Apr 20 00:28:52 localhost kernel: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
Apr 20 00:28:52 localhost kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Apr 20 00:28:52 localhost kernel: vmalloc : 0xd8770000 - 0xff7fe000 ( 624 MB)
Apr 20 00:28:52 localhost kernel: lowmem : 0xc0000000 - 0xd7f70000 ( 383 MB)
Apr 20 00:28:52 localhost kernel: .init : 0xc1457000 - 0xc14c1000 ( 424 kB)
Apr 20 00:28:52 localhost kernel: .data : 0xc131b86b - 0xc1456a00 (1260 kB)
Apr 20 00:28:52 localhost kernel: .text : 0xc1000000 - 0xc131b86b (3182 kB)
Apr 20 00:28:52 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Apr 20 00:28:52 localhost kernel: SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Apr 20 00:28:52 localhost kernel: Preemptable hierarchical RCU implementation.
Apr 20 00:28:52 localhost kernel: RCU-based detection of stalled CPUs is disabled.
Apr 20 00:28:52 localhost kernel: Verbose stalled-CPUs detection is disabled.
Apr 20 00:28:52 localhost kernel: NR_IRQS:512
Apr 20 00:28:52 localhost kernel: CPU 0 irqstacks, hard=d700c000 soft=d700e000
Apr 20 00:28:52 localhost kernel: Console: colour VGA+ 80x25
Apr 20 00:28:52 localhost kernel: console [tty0] enabled
Apr 20 00:28:52 localhost kernel: Fast TSC calibration using PIT
Apr 20 00:28:52 localhost kernel: Detected 2999.891 MHz processor.
Apr 20 00:28:52 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.77 BogoMIPS (lpj=9999636)
Apr 20 00:28:52 localhost kernel: pid_max: default: 32768 minimum: 301
Apr 20 00:28:52 localhost kernel: Security Framework initialized
Apr 20 00:28:52 localhost kernel: AppArmor: AppArmor disabled by boot time parameter
Apr 20 00:28:52 localhost kernel: Mount-cache hash table entries: 512
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys ns
Apr 20 00:28:52 localhost kernel: ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys cpuacct
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys memory
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys devices
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys freezer
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys net_cls
Apr 20 00:28:52 localhost kernel: Initializing cgroup subsys blkio
Apr 20 00:28:52 localhost kernel: CPU: Physical Processor ID: 0
Apr 20 00:28:52 localhost kernel: CPU: Processor Core ID: 0
Apr 20 00:28:52 localhost kernel: mce: CPU supports 4 MCE banks
Apr 20 00:28:52 localhost kernel: [Hardware Error]: No human readable MCE decoding support on this CPU type.
Apr 20 00:28:52 localhost kernel: [Hardware Error]: Run the message through 'mcelog --ascii' to decode.
Apr 20 00:28:52 localhost kernel: Disabling lock debugging due to kernel taint
Apr 20 00:28:52 localhost kernel: CPU0: Thermal monitoring enabled (TM1)
Apr 20 00:28:52 localhost kernel: using mwait in idle threads.
Apr 20 00:28:52 localhost kernel: ACPI: Core revision 20110112
Apr 20 00:28:52 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Apr 20 00:28:52 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Apr 20 00:28:52 localhost kernel: ..MP-BIOS bug: 8254 timer not connected to IO-APIC
Apr 20 00:28:52 localhost kernel: ...trying to set up timer (IRQ0) through the 8259A ...
Apr 20 00:28:52 localhost kernel: ..... (found apic 0 pin 2) ...
Apr 20 00:28:52 localhost kernel: ....... works.
Apr 20 00:28:52 localhost kernel: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
Apr 20 00:28:52 localhost kernel: Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
Apr 20 00:28:52 localhost kernel: ... version: 0
Apr 20 00:28:52 localhost kernel: ... bit width: 40
Apr 20 00:28:52 localhost kernel: ... generic registers: 18
Apr 20 00:28:52 localhost kernel: ... value mask: 000000ffffffffff
Apr 20 00:28:52 localhost kernel: ... max period: 0000007fffffffff
Apr 20 00:28:52 localhost kernel: ... fixed-purpose events: 0
Apr 20 00:28:52 localhost kernel: ... event mask: 000000000003ffff
Apr 20 00:28:52 localhost kernel: NMI watchdog enabled, takes one hw-pmu counter.
Apr 20 00:28:52 localhost kernel: CPU 1 irqstacks, hard=d708e000 soft=d7090000
Apr 20 00:28:52 localhost kernel: Booting Node 0, Processors #1 Ok.
Apr 20 00:28:52 localhost kernel: Initializing CPU#1
Apr 20 00:28:52 localhost kernel: NMI watchdog enabled, takes one hw-pmu counter.
Apr 20 00:28:52 localhost kernel: Brought up 2 CPUs
Apr 20 00:28:52 localhost kernel: Total of 2 processors activated (12004.60 BogoMIPS).
Apr 20 00:28:52 localhost kernel: devtmpfs: initialized
Apr 20 00:28:52 localhost kernel: NET: Registered protocol family 16
Apr 20 00:28:52 localhost kernel: ACPI: bus type pci registered
Apr 20 00:28:52 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2
Apr 20 00:28:52 localhost kernel: PCI: Using configuration type 1 for base access
Apr 20 00:28:52 localhost kernel: bio: create slab <bio-0> at 0
Apr 20 00:28:52 localhost kernel: ACPI: EC: Look up EC in DSDT
Apr 20 00:28:52 localhost kernel: ACPI: Interpreter enabled
Apr 20 00:28:52 localhost kernel: ACPI: (supports S0 S3 S4 S5)
Apr 20 00:28:52 localhost kernel: ACPI: BIOS offers _GTS
Apr 20 00:28:52 localhost kernel: ACPI: If "acpi.gts=1" improves suspend, please notify [email protected]
Apr 20 00:28:52 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Apr 20 00:28:52 localhost kernel: ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
Apr 20 00:28:52 localhost kernel: ACPI: No dock devices found.
Apr 20 00:28:52 localhost kernel: HEST: Table not found.
Apr 20 00:28:52 localhost kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Apr 20 00:28:52 localhost kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x18000000-0xfebfffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
Apr 20 00:28:52 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
Apr 20 00:28:52 localhost kernel: pci 0000:00:00.0: [1002:5833] type 0 class 0x000600
Apr 20 00:28:52 localhost kernel: pci 0000:00:00.0: reg 10: [mem 0xd2000000-0xd3ffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:00:00.0: reg 14: [mem 0xd0000000-0xd0000fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: [1002:5838] type 1 class 0x000604
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.0: [1002:4347] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.0: reg 10: [mem 0xd0001000-0xd0001fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.1: [1002:4348] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:00:13.1: reg 10: [mem 0xd0002000-0xd0002fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: [1002:4353] type 0 class 0x000c05
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: reg 10: [io 0x8040-0x804f]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: reg 14: [mem 0x00000000-0x000003ff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: [1002:4349] type 0 class 0x000101
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 18: [io 0x0170-0x0177]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.1: reg 20: [io 0x8060-0x806f]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.3: [1002:434c] type 0 class 0x000601
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: [1002:4342] type 1 class 0x000604
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.5: [1002:4341] type 0 class 0x000401
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.5: reg 10: [mem 0xd0003000-0xd00030ff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.6: [1002:434d] type 0 class 0x000703
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.6: reg 10: [mem 0xd0003400-0xd00034ff]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: [1002:5835] type 0 class 0x000300
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 18: [mem 0xd0100000-0xd010ffff]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: [104c:8026] type 0 class 0x000c00
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: reg 10: [mem 0xd0208000-0xd02087ff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: reg 14: [mem 0xd0200000-0xd0203fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
Apr 20 00:28:52 localhost kernel: pci 0000:02:00.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:02.0: [14e4:4320] type 0 class 0x000280
Apr 20 00:28:52 localhost kernel: pci 0000:02:02.0: reg 10: [mem 0xd0204000-0xd0205fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: [10ec:8139] type 0 class 0x000200
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: reg 10: [io 0xa000-0xa0ff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: reg 14: [mem 0xd0208800-0xd02088ff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:03.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: [104c:ac54] type 2 class 0x000607
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: [104c:ac54] type 2 class 0x000607
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: reg 10: [mem 0x00000000-0x00000fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.1: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.2: [104c:8201] type 0 class 0x000880
Apr 20 00:28:52 localhost kernel: pci 0000:02:04.2: reg 10: [io 0xa400-0xa43f]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: [1033:0035] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: reg 10: [mem 0xd0206000-0xd0206fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.0: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: [1033:0035] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: reg 10: [mem 0xd0207000-0xd0207fff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.1: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: [1033:00e0] type 0 class 0x000c03
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: reg 10: [mem 0xd0208c00-0xd0208cff]
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: supports D1 D2
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot D3cold
Apr 20 00:28:52 localhost kernel: pci 0000:02:07.2: PME# disabled
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode)
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xd0200000-0xd02fffff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
Apr 20 00:28:52 localhost kernel: pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:02 [bus 02-04]
Apr 20 00:28:52 localhost kernel: pci_bus 0000:00: on NUMA node 0
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) *0, disabled.
Apr 20 00:28:52 localhost kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
Apr 20 00:28:52 localhost kernel: vgaarb: loaded
Apr 20 00:28:52 localhost kernel: PCI: Using ACPI for IRQ routing
Apr 20 00:28:52 localhost kernel: PCI: pci_cache_line_size set to 64 bytes
Apr 20 00:28:52 localhost kernel: reserve RAM buffer: 000000000009f800 - 000000000009ffff
Apr 20 00:28:52 localhost kernel: reserve RAM buffer: 0000000017f70000 - 0000000017ffffff
Apr 20 00:28:52 localhost kernel: NetLabel: Initializing
Apr 20 00:28:52 localhost kernel: NetLabel: domain hash size = 128
Apr 20 00:28:52 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
Apr 20 00:28:52 localhost kernel: NetLabel: unlabeled traffic allowed by default
Apr 20 00:28:52 localhost kernel: pnp: PnP ACPI init
Apr 20 00:28:52 localhost kernel: ACPI: bus type pnp registered
Apr 20 00:28:52 localhost kernel: pnp 00:00: [bus 00-ff]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000a0000-0x000bffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000c0000-0x000c3fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000c4000-0x000c7fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000c8000-0x000cbfff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000cc000-0x000cffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000d0000-0x000d3fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000d4000-0x000d7fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000d8000-0x000dbfff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000dc000-0x000dffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000e0000-0x000e3fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000e4000-0x000e7fff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000e8000-0x000ebfff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x000ec000-0x000effff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [mem 0x18000000-0xfebfffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [io 0x0cf8-0x0cff]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [io 0x0000-0x0cf7 window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: [io 0x0d00-0xffff window]
Apr 20 00:28:52 localhost kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x0000-0x001f]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x0080-0x008f]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x00c0-0x00df]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x040b]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [io 0x04d6]
Apr 20 00:28:52 localhost kernel: pnp 00:01: [dma 4]
Apr 20 00:28:52 localhost kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:02: [io 0x00f0-0x00fe]
Apr 20 00:28:52 localhost kernel: pnp 00:02: [irq 13]
Apr 20 00:28:52 localhost kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:03: [io 0x0070-0x0073]
Apr 20 00:28:52 localhost kernel: pnp 00:03: [irq 8]
Apr 20 00:28:52 localhost kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:04: [io 0x0061]
Apr 20 00:28:52 localhost kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:05: [io 0x0060]
Apr 20 00:28:52 localhost kernel: pnp 00:05: [io 0x0064]
Apr 20 00:28:52 localhost kernel: pnp 00:05: [irq 1]
Apr 20 00:28:52 localhost kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:06: [irq 12]
Apr 20 00:28:52 localhost kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x002e-0x002f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x004e-0x004f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x00b0-0x00b1]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0092]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0200-0x020f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c14]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c50-0x0c52]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c6c]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0c6f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x0cd6-0x0cd7]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x1080]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x8000-0x803f]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0x8800]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0xfe00]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [io 0xfe10-0xfe11]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0x000e4000-0x000fffff]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0x00100000-0x17ffffff]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0xd0000000-0xd0000fff]
Apr 20 00:28:52 localhost kernel: pnp 00:07: [mem 0xfff80000-0xffffffff]
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0200-0x020f] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c14] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c50-0x0c52] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c6c] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0c6f] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x0cd6-0x0cd7] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x1080] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x8000-0x803f] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0x8800] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0xfe00] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [io 0xfe10-0xfe11] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0x000e4000-0x000fffff] could not be reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0x00100000-0x17ffffff] could not be reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0xd0000000-0xd0000fff] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: [mem 0xfff80000-0xffffffff] has been reserved
Apr 20 00:28:52 localhost kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Apr 20 00:28:52 localhost kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (disabled)
Apr 20 00:28:52 localhost kernel: pnp 00:09: [io 0x0378-0x037f]
Apr 20 00:28:52 localhost kernel: pnp 00:09: [io 0x0778-0x077b]
Apr 20 00:28:52 localhost kernel: pnp 00:09: [irq 7]
Apr 20 00:28:52 localhost kernel: pnp 00:09: [dma 1]
Apr 20 00:28:52 localhost kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
Apr 20 00:28:52 localhost kernel: pnp: PnP ACPI: found 10 devices
Apr 20 00:28:52 localhost kernel: ACPI: ACPI bus type pnp unregistered
Apr 20 00:28:52 localhost kernel: Switching to clocksource acpi_pm
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.4: BAR 15: assigned [mem 0x28000000-0x2fffffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: BAR 1: assigned [mem 0x30000000-0x300003ff]
Apr 20 00:28:52 localhost kernel: pci 0000:00:14.0: BAR 1: set to [mem 0x30000000-0x300003ff] (PCI address [0x30000000-0x300003ff])
Apr 20 00:28:52 localhost kernel: pci 0000:01:05.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
Apr 20 00:28:52 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Apr 20 00:28:52 localhosYou have to get an app to do this, luckily I found this...I
use it for my other monitors - 2nd Screen Saver runs an independent screen saver on the other screen(s)!
http://2ndscreensaver.blogspot.com/ -
I installed Premiere Pro CS 6.0 on a brand new system.
Win 8.1,
i7 3.4 GHz on an Asus Sabertooth
16 Gig memory
AMD Radeon R9 290 Graphics Board with the latest drivers and Bios.
On starting Premiere I get the (as I noticed quite frequent appearing) error message that Premiere cannot find a capable play module and the suggestion to update my video drivers.
I tried everything I found in this forum or on the web:
Installed the latest drivers
Run the program as an administrator
Updated the Graphics board Bios
Updated Premiere CS6
Started Gpusniffer in CMD-mode to find out what board it found and added that to the cuda_supported_cards.txt in the Premiere directory.
All to no avail. The app will simply not start.
The Gpusniffers report states:
Loadlibrary “n” failed
Loadlibrary “n” failed
--- OpenGL Info ---
Vendor: ATI Technologies Inc.
Renderer: AMD Radeon R9 200 series
OpenGL Version: 4.4.13084 Compatability Profile Context 14.301.1001.0
GLSL Version 4.40
Monitors: 1
Monitor 0 properties –
Size: <0, 0, 1920 1080>
Mex texture size: 16384
Support non-power of two: 1
Shaders 444 :1
Shaders 422: 1
Shaders 420: 1
--- GPU Information Info –
Did not find any devices that support GPU computation.
As I invested a lot in the CS6 Master Collection I am not considering an update tot the CC version, also because the same problem occurs in that version too.
I would be much obliged if someone has an answer that truly will work. This problem costed me the best part of two days’ work and fouled up my workflow considerably.==========
I tried to go into display settings and disable the Intel card. (this caused low resolution which is unexceptable)
==========
This makes me think it's using that graphics "card" ( probably built into mobo ? ...called 'onboard graphics ? )
This stuff gets tricky and sometimes the only way to make windows 'recognize' the pci graphics card is to actually take it out and boot, and then put it back in...
Then you get mssg " windows detected new hardware" and you install the drivers...
usually bios gives you choice of using onboard graphics or not ( but this too is wanky sometimes...sorry to say ...)
I recently ( this past year ) had a similar sort of situation but have a desktop, where its easy for me to take off side panel and pull the pci-e graphics card and boot, and get that horrible low res default screen...turn off, install card, reboot etc...
but anyway, it sounds to me like you're notebook is using that mobile graphics driver stuff and not the radeon. Somehow you've got to make it switch to that graphics card is maybe your solution.
sorry I dont have notebook but maybe someone else here does and can help more...
good luck.
ps..its always a weird fact of life...when things aren't working 'right' something has to get done fast....
edit:
I dont know how much you know about windows stuff, but after you disable that intel thing and get your low res screen.. you DID try to update the driver for that card using 'my computer / device manager ' right ?? -
SatellIte A100-220 - ATI Radeon Xpress 200M Driver update
Hello
I have a laptop Toshiba SatellIte A100-220 and I can not find the latest driver for Ati Radeon Xpress 200M, could you help me?
Advance I thank.Which operating system do you use?
I presume that you know that you should use drivers from Toshiba support page. Have you already checked latest version there? -
looking for Windows graphics drivers for my old laptop. the card is an ATI RADEON® XPRESS 200M IGP. Thanks.
Please provide your system model
You have the option of using the inbox Microsoft Basic Display Driver or
the Windows 7 driver (not fully Win 8 compatible)
http://catalog.update.microsoft.com/v7/site/Search.aspx?q=pci%5cven_1002%26dev_5a62
ATI Technologies Inc. - Display - ATI Radeon Xpress Series 32-bit Windows 7 Drivers (Other Hardware) 12/1/2008 8.561.0.0 42.0 MB 44041632
ATI Technologies Inc. - Display - ATI Radeon Xpress Series 64-bit Windows 7 Drivers (Other Hardware) 12/1/2008 8.561.0.0 81.1 MB 85032672 -
ATI Radeon Xpress 200M Drivers
Hi everyone, I have a Toshiba Satellite M50 laptop and am running Windows 7 Ultimate, and have the ATI Radeon Xpress 200M graphics card. I used the initial 8.31 Vista driver and upgraded to the 8.561 beta driver for Windows 7, through the Microsoft Update Catalog. As this is now a legacy card, I have downloaded and tried the 8.671 driver (in the Catalyst 9.11 package) from the ATI website and this did not work, only installing updates to the CCC. I don't care about the Catalyst Control Center, and am only after the driver itself.
Since the drivers on the ATI website are in the form of an .exe package, I cannot get a hold of the appropriate .inf file for the graphics card. I was wondering if it were indeed possible to obtain a newer version than 8.561 of the graphics driver, by way of .inf file or not? I would be very grateful for any help or insight into this.
Hardware IDs in Device Manager for my card is:
PCI\VEN_1002&DEV_5A62&SUBSYS_FF001179&REV_00
PCI\VEN_1002&DEV_5A62&SUBSYS_FF001179
PCI\VEN_1002&DEV_5A62&CC_030000
PCI\VEN_1002&DEV_5A62&CC_0300
Compatible IDs:
PCI\VEN_1002&DEV_5A62&REV_00
PCI\VEN_1002&DEV_5A62
PCI\VEN_1002&CC_030000
PCI\VEN_1002&CC_0300
PCI\VEN_1002
PCI\CC_030000
PCI\CC_0300Hi blastoise,
As you may noticed, the latest driver for your display card is only for Windows Vista on the manufacturer's website. It seems there is no newer driver is published. Therefore, I think the most suitable driver is provided by Windows Update which is version 8.561.0.0. Please see HERE. You can also contact Toshiba directly to confirm this issue.
Besides, does the driver you installed work properly? If not, could you please provide the error message listed in Device Manager?
1. Click the Start Button, type Device Manager in the Search bar and press "Enter". Click Continue if necessary.
2. Double click to expand the "Display adapter"
3. Right click the display card and click "Properties".
Regards,
Linda -
[Athlon64] Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
I am looking to purchase a computer for my wife who does not require major computing power. And looks like ATI is a cheaper option. Any recommendations?
Any info is greatly appreciated.Quote from: dannol48 on 23-June-05, 02:25:47
The RS480M2-IL haa a CnQ option in Bios.
Installing the AMD driver and setting the Power Scheme to "Minimal Power Management" in Power Options is required to enable CnQ in XP.
Danno
Hello Danno ^^¿''
Well, I just bought the RS480M2-IL with a Venice 3000+ and 1 GB DDR, I've tested the Video onboard(all the newest drivers installed) with the 3DMARK 2001, and I just can get 3052 ptos...so .. please tell if you has made some time ...and how's your score?
Oh man please tell me...maybe I made a bad choise but I was specting something better from this Mobo!!!...
thanks and enjoy the time
PD: Another thing: my modo comes with the bios ver. 3.4 ...and have "The Normals falis" son I don't really know wich ver, could be better....cya.. -
can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??
Note: These types of discs or activities are not supported by DVD or CD sharing:
DVD movies.
Audio CDs.
Copy protected discs such as game discs.
Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
Burn a CD or DVD -
Touch is not working even install the drives for windows 8.1 pro for HP 15r 249 tu
Hi,
I have pitched note book from HP, the model is HP r15- 249 tu,I have installed windows 8.1 pro , downloaded touch drives from HP support and installed successfully but the touch is not working , and all drives are working fine but touch drives are not working , please suggest me what will I take action
Regards,
VivekDouble post
Creating double post will only lead to confusion.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations. -
Overclocking ATI Radeon xpress 1270
Hi guys
I have an msi notebook ER 710 with ATI RADEON XPRESS 1270 and i wonder if I can overclock the vga card. If any body knows how i can overclock it please give me some information and how can it be done?
10xYou can use Ati Tool ==> https://forum-en.msi.com/index.php?topic=107133.0 should able to do that.
But however OC VGA notebook is not recommended. -
HP Omni 10 5600eg: Install Windows 8.1 Pro x86
Hi,
is it possible to install Windows 8.1 Professional (32 bit) on the Omni 10 without problems?
Are there any how-tos available?
Regards
AndreasHi @AndreasN , welcome to the HP Forums. I understand you are looking for an instructional to install Windows 8.1 Pro x 32 on your Omni tablet.
If you are saying that you want to install a retail copy of Windows on it, I do not have an instructional for you and I have never done it on an Omni tablet. I cannot guarantee you wouldn't have any problems, but I can give you a few things you will need. Here are the drivers you will need:
HP Omni 10 5600eg Tablet Drivers
If you have Windows 8.1 DVD's you would need a computer to make an installation USB drive to get it on your tablet:
Create installation media for Windows 8.1. There are many other instructionals out there as well, if you need more info.
If I am wrong, and you just mean to do a factory reset, these instructions cover that: Recovering Software on Your HP Tablet (Windows 8)
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Install Windows 8.1 Pro on Acer Aspire V Nitro VN7-591
Hi forum, I recently bought the Acer Aspire V Nitro VN7-591 and I noticed that it only comes with the Core Edition of Windows 8.1. As I need some of the features of the Windows 8.1 Pro Edition (joining domains, remote display etc.) I would like to upgrade the System to Windows 8.1 Pro. I still have an unused Pro retail key (no OEM, no Upgrade Pack) here so at the moment I'm downloading the ISO for Windows 8.1 Pro. But prior to installation I would like to make sure that everything works out fine and I don't run intro problems. First of all: is there anything I need to save from the old OS (except from the recovery partition- I already saved that to a USB drive using the recovery program provided by Acer)? Do I have to know my Product Key (using for example a key viewer software) just in case? Do I have to disable secure boot in BIOS? Second: can I just install Windows 8.1 Pro using my ISO and installing the drivers from the Acer support website? Drivers should still work, right? Third: if I ever want to switch back to Windows 8.1 Core (the OEM edition) do I just use the USB pen drive created with the acer recovery tool? Will my retail Windows 8.1 Pro Key be usable again if I switch back to the original OS? Sorry for asking that many questions but I just have to make sure that it runs trough right in the first place because I need the Laptop to function. What would be your standard procedure to this kind of "problem"? Thanks in advance and with regards,The_DJ Edit:I might have forgotten to mention that I want to do a clean reinstall without all the bloatware from Acer. That's why I'm using the Windows 8.1 Pro "Vanilla" ISO and if I ever want to switch back to core use the Windows 8.1 Core "Vanilla" ISO. Is that possible or would I have to use the recovery partition saved to my USB drive?
Changing the Operating System may cause driver conflicts. The compatible drivers for Windows 8.1 will not be available in the website for this laptop. Hence, some of the features on the laptop might not work after changing the OS. 1: Since you have already created the USB recovery media from the laptop, you do not have to copy anything else other than this. Make sure you you backup all files before installing the OS, as it will remove all data from the laptop. I see that, you have the unused Pro retail key for the OS, hence, you do not have to have the OEM product key. You need to use the product key for Windows 8.1 Pro to activate it, not the Acer OEM product key. In the BIOS, select BOOT tab. Select BOOT MODE as Legacy Mode instead of UEFI.Disable Secure Boot. Under Boot Priority Order, you need to select 1 as CD/DVD (if you are using disc), or USB FDD or USB HDD (if you are using USB drive) to install Windows 8.1 Pro. Then press the F10 key and select "Yes" to save the changes in BIOS. ->You an install Windows 8.1 Pro using my ISO and installing the drivers from the Acer support website. As said before, there may driver conflicts. -> If you want to switch back to Windows 8.1, you may use the USB reovery drive (which created you have created from the recovery partition). When you do this, the Windows 8.1 Pro and it's product key will be removed from the laptop and the factory shipped OS, drivers, apps (and the OEM product key) will be installed automatically. You do not have to use the Windows 8.1 Pro key with Acer OEM USB reovery media. -> You need to do a clean install using the USB recovery drive to install factory shipped Windows on the laptop.
-
Sound missing after installing windows 8.1 pro.
hi. i have a problem. after instaling windows 8.1 pro , sound is missing. i in device manager everything is fine. instaled every driver.
product name: laptop hp 620.
a day before this, i had windows 7 and everything worked fine. tried everything. i dont know what else to do. if i dont find a solution then i go back to windows 7 ((Hi:
The only suggestion I can offer would be to try a W8.1 IDT audio driver...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp... -
Installing windows on MacBook Pro
I am looking into installing Windows on my Pro because I need Visual Studio for programming and just need some questions answered.
1. Is there a Mac native alternative to Visual Studio? I am using it for a Visual basic class I am taking and we are creating windows applications.
2. Can I buy an external hard drive to run Windows OS from? I opted for the ~256gb SSD MacBook Pro and am not wanting to waste storage space on Windows OS, especially since I do not foresee using it after this class.
3. If I cannot run Windows from an external hard drive: How easy is Windows installation, as well as how easy is it to remove Windows OS when I am finished using Visual Studio? Are there risks to my MacBook accompanied with Windows installation?1, No
2, No, Microsoft doesn't allow that
3, Read http://manuals.info.apple.com/MANUALS/1000/MA1583/en_US/boot_camp_install-setup_ 10.7.pdf
Maybe you are looking for
-
Download Adobe Photoshop Elements 6.0
HELP! I have a valid serial number for Photoshop Elements 6.0 from a purchased copy a couple of years back. I recently moved and reformatted my computer without realizing my install disks did not make it to the new house. I had backed up the entire A
-
Illustrator CS4 saving vector art for Microsoft Word
I have a logo created in Illustrator CS4. I saved the file for use in Microsoft Office using the "save for Office", exporting as a .wmf, and even saving the vector art in Photoshop as a .png. I can get a variety of formats to work well in Word docume
-
Hi eb, I have a problem with Display profiles. When 2 users are log in, my display profil switch to "Generic RGB" and I cannot change it to any other profil. When I restart and log in one user - everything is ok. When I log in second user display pro
-
Problem with Access Manager intergration
Hi, I'm integrating Identity Manager and Access Manager. I've configured the End User interface to use Access Manager for authentication, and I have (as far as I can tell) everything else set up and working correctly. When I access the end user pages
-
FCP X Project export to USB Thumb Drive
I have a client that is requesting thier Wedding DVD to go on a USB Thumb Drive so they can watch it on thier TV in Full 1080p HD and not have to use a DVD Player (which degrades the quality from its original source). My first question is - How do I