ATI Radeon Xpress 200M Drivers

Hi everyone, I have a Toshiba Satellite M50 laptop and am running Windows 7 Ultimate, and have the ATI Radeon Xpress 200M graphics card. I used the initial 8.31 Vista driver and upgraded to the 8.561 beta driver for Windows 7, through the Microsoft Update Catalog. As this is now a legacy card, I have downloaded and tried the 8.671 driver (in the Catalyst 9.11 package) from the ATI website and this did not work, only installing updates to the CCC. I don't care about the Catalyst Control Center, and am only after the driver itself.
Since the drivers on the ATI website are in the form of an .exe package, I cannot get a hold of the appropriate .inf file for the graphics card. I was wondering if it were indeed possible to obtain a newer version than 8.561 of the graphics driver, by way of .inf file or not? I would be very grateful for any help or insight into this.
Hardware IDs in Device Manager for my card is:
PCI\VEN_1002&DEV_5A62&SUBSYS_FF001179&REV_00
PCI\VEN_1002&DEV_5A62&SUBSYS_FF001179
PCI\VEN_1002&DEV_5A62&CC_030000
PCI\VEN_1002&DEV_5A62&CC_0300
Compatible IDs:
PCI\VEN_1002&DEV_5A62&REV_00
PCI\VEN_1002&DEV_5A62
PCI\VEN_1002&CC_030000
PCI\VEN_1002&CC_0300
PCI\VEN_1002
PCI\CC_030000
PCI\CC_0300

Hi blastoise,
As you may noticed, the latest driver for your display card is only for Windows Vista on the manufacturer's website. It seems there is no newer driver is published. Therefore, I think the most suitable driver is provided by Windows Update which is version 8.561.0.0. Please see HERE. You can also contact Toshiba directly to confirm this issue.
Besides, does the driver you installed work properly? If not, could you please provide the error message listed in Device Manager?
1. Click the Start Button, type Device Manager in the Search bar and press "Enter". Click Continue if necessary.
2. Double click to expand the "Display adapter"
3. Right click the display card and click "Properties".
Regards,
Linda

Similar Messages

  • Ati radeon xpress 200m igp

    looking for Windows  graphics drivers for my old laptop.  the card is an ATI RADEON® XPRESS 200M IGP.  Thanks.

    Please provide your system model
    You have the option of using the inbox Microsoft Basic Display Driver or
    the Windows 7 driver (not fully Win 8 compatible)
    http://catalog.update.microsoft.com/v7/site/Search.aspx?q=pci%5cven_1002%26dev_5a62
      ATI Technologies Inc. - Display - ATI Radeon Xpress Series 32-bit Windows 7 Drivers (Other Hardware) 12/1/2008 8.561.0.0 42.0 MB 44041632    
    ATI Technologies Inc. - Display - ATI Radeon Xpress Series 64-bit Windows 7 Drivers (Other Hardware) 12/1/2008 8.561.0.0 81.1 MB 85032672  

  • SatellIte A100-220 - ATI Radeon Xpress 200M Driver update

    Hello
    I have a laptop Toshiba SatellIte A100-220 and I can not find the latest driver for Ati Radeon Xpress 200M, could you help me?
    Advance I thank.

    Which operating system do you use?
    I presume that you know that you should use drivers from Toshiba support page. Have you already checked latest version there?

  • Suspend to RAM with KMS enabled and ATI Radeon XPRESS 200M

    Per this thread, I added the file to /etc/X11/xorg.conf.d to disable glx in order to continue booting with 'nomodeset' to disable KMS after today's updates.  I've always had to boot with 'nomodeset' so that suspend/resume will work properly (I get a black screen/freeze on resume from suspend to ram). However, with this fix, my screen redraws are happening MUCH slower than before the update. Anyone have KMS enabled AND suspend/resume working with an:  ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)?
    Thanks,
    Scott
    Last edited by firecat53 (2010-11-26 18:40:22)

    Ok, sorry for a delay -- long weekend...
    Suspend + KMS have been working starting sometimes in the 2.6.35 series.
    My guess as to why you can't suspend, is your BIOS/motherboard, nothing else.
    Anyway, here is the info:
    ~$ /usr/sbin/lspci
    00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
    00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
    00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
    00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
    00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
    00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
    00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
    00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
    00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
    00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
    00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    01:05.0 VGA compatible controller: ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
    05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
    ~$ head /var/log/pm-suspend.log
    Initial commandline parameters: --quirk-dpms-suspend
    --quirk-dpms-on
    --quirk-vbestate-restore
    --quirk-vbemode-restore
    --quirk-vga-mode3
    --quirk-vbe-post
    Tue Nov 30 19:58:21 EST 2010: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux bluemoon 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 06:44:11 UTC 2010 i686 Mobile AMD Sempron(tm) Processor 3000+ AuthenticAMD GNU/Linux
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
    :: wlan_wpa_supplicant down [BUSY] [DONE]
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    Unloading kernel module b43...Done.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    kernel.acpi_video_flags = 0
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Tue Nov 30 19:58:24 EST 2010: performing suspend
    Tue Nov 30 20:57:03 EST 2010: Awake.
    Tue Nov 30 20:57:03 EST 2010: Running hooks for resume
    Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
    /usr/lib/pm-utils/sleep.d/95led resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
    Reloaded unloaded modules.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
    :: wlan_wpa_supplicant up [BUSY] [DONE]
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Tue Nov 30 20:57:20 EST 2010: Finished.
    Kernel command line: root=/dev/disk/by-uuid/8d834d14-8413-481a-9f69-3fd20dc25773 ro radeon.modeset=1
    ~$ pacman -Q xf86-video-ati
    xf86-video-ati 6.13.2-2
    ~$ cat /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    EndSection
    Section "ServerFlags"
    Option "DontZap" "on"
    EndSection
    Section "Monitor"
    Identifier "LCD Panel"
    EndSection
    Section "Device"
    Identifier "Radeon XPress 200M"
    Driver "radeon"
    Option "EnablePageFlip" "on"
    Option "EXAPixmaps" "on"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Radeon XPress 200M"
    Monitor "LCD Panel"
    EndSection

  • [Athlon64] Anybody has any experience with ATI Radeon XPRESS 200P chip sets?

    Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
    I am looking to purchase a computer for my wife who does not require major computing power. And looks like ATI is a cheaper option.  Any recommendations?
    Any info is greatly appreciated.

    Quote from: dannol48 on 23-June-05, 02:25:47
    The RS480M2-IL haa a CnQ option in Bios. 
    Installing the AMD driver and setting the Power Scheme to "Minimal Power Management" in Power Options is required to enable CnQ in XP.
    Danno
    Hello Danno ^^¿''
    Well, I just bought the RS480M2-IL with a Venice 3000+ and 1 GB DDR, I've tested the Video onboard(all the newest drivers installed)  with the 3DMARK  2001, and I just can get 3052 ptos...so .. please tell if you has made some time ...and how's your score?
    Oh man please tell me...maybe I made a bad choise but I was specting something better from this Mobo!!!...
    thanks and enjoy the time 
    PD: Another thing: my modo comes with the bios ver. 3.4 ...and have "The Normals falis" son I don't really know wich ver, could be better....cya..

  • Radeon RS482 (Radeon Xpress 200M) no 3D acceleration

    Hi,
    I'have a problem with opensource radeon driver.
    No have any 3D acceleration.
    lspci :
    01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M]
    glxinfo | grep -i opengl :
    OpenGL vendor string: Mesa Project
    OpenGL renderer string: Software Rasterizer
    OpenGL version string: 2.1 Mesa 7.6
    OpenGL shading language version string: 1.20
    OpenGL extensions:
    /etc/X11/xorg.conf :
    Section "Module"
    Load "i2c" # pour gérer la télévision
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri" # module pour l'accélération matériel
    Load "dri2" # module pour l'accélération matériel
    Load "extmod"
    Load "glx" # pour la 3D
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "int10" # ajout
    Load "vbe" # ajout
    Load "record"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]"
    Driver "radeon"
    # Driver "ati" # wrapper générique, il choisit le bon pilote (radeon, rage128, ...)
    # Option "AccelMethod" "EXA" # choisir XAA ou EXA - XAA est le plus stable, EXA est considéré comme stable depuis le pilote 6.7.194.
    # Option "AccelDFS" "1" # mettre "1" si la carte n'est pas une AGP - s'utilise avec EXA
    # Option "AGPMode" "4" # règle le débit AGP ( "1" par défaut), pour carte AGP seulement
    # Option "AGPSize" "128" # pour carte AGP seulement
    Option "GARTSize" "64"
    Option "RingSize" "8"
    Option "BufferSize" "2"
    Option "EnablePageFlip" "1" # active 'page flipping' pour les applis 3D, parfois instable !
    Option "EnableDepthMoves" "yes"
    Option "UseFBDev" "false"
    Option "ColorTiling" "1"
    Option "RenderAccel" "true" # Active l'accélération matériel
    Option "mtrr" "on"
    Option "SubPixelOrder" "none"
    Option "DPMS" "true" # gestion de l'énergie de l'écran
    Option "DynamicClocks" "off"
    Option "DRI" "true"
    Option "NoAccel" "false"
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    Option "RENDER" "Enable"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    dmesg with radeon loading :
    Modules linked in: snd_hda_intel(+) snd_hda_codec radeon(+) ttm drm_kms_helper b44 drm sdhci_pci sdhci snd_hwdep snd_pcm snd_timer snd soundcore video ssb pcmcia pcmcia_core mmc_core joydev usbhid hid i2c_algo_bit led_class wmi output snd_page_alloc mii battery ac dell_laptop rfkill thermal lib80211_crypt_tkip button ricoh_mmc wl(P) ohci_hcd psmouse amd64_edac_mod dcdbas ehci_hcd evdev edac_core sg serio_raw lib80211 usbcore i2c_piix4 i2c_core cpufreq_userspace shpchp pci_hotplug k8temp cpufreq_conservative cpufreq_powersave cpufreq_ondemand powernow_k8 freq_table processor rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 dm_mod sd_mod sr_mod cdrom pata_acpi ata_generic ahci pata_atiixp libata scsi_mod
    Pid: 1776, comm: modprobe Tainted: P 2.6.31-ARCH #1 Inspiron 1501
    RIP: 0010:[<ffffffffa04cd1e3>] [<ffffffffa04cd1e3>] radeon_driver_load+0x93/0x2c0 [radeon]
    RSP: 0000:ffff88015c163e38 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: ffff88015eca8800 RCX: 0000000000000011
    RDX: 0000000001030011 RSI: 0000000000000000 RDI: ffff88015c18d000
    RBP: ffff88015c18c800 R08: 0000000000000000 R09: 0000000000000000
    R10: 2222222222222222 R11: 2222222222222222 R12: 00000000fffffff4
    R13: 0000000001030011 R14: ffffffffa0572f20 R15: ffff88015eca8bf8
    FS: 00007f9730b73700(0000) GS:ffff880028028000(0000) knlGS:0000000000000000
    CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 0000000000000098 CR3: 000000015c963000 CR4: 00000000000006f0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process modprobe (pid: 1776, threadinfo ffff88015c162000, task ffff88015c131a80)
    Stack:
    0000000000ae6500 00000000b928fdd1 0000000000000000 ffff88015eca8800
    <0> ffff88015f923000 ffffffffa0571ba0 ffffffffa0572f20 ffffffffa047f813
    <0> ffff88015f923090 ffffffff811e8006 0000000000000000 00000000b928fdd1
    Call Trace:
    [<ffffffffa047f813>] ? drm_get_dev+0x353/0x5b0 [drm]
    [<ffffffff811e8006>] ? kobject_get+0x26/0x50
    [<ffffffffa0479450>] ? drm_init+0xc0/0x140 [drm]
    [<ffffffffa0088000>] ? radeon_init+0x0/0xe8 [radeon]
    [<ffffffff81009075>] ? do_one_initcall+0x45/0x1d0
    [<ffffffff81098055>] ? sys_init_module+0x105/0x260
    [<ffffffff8100c382>] ? system_call_fastpath+0x16/0x1b
    Code: 84 9a 00 00 00 49 0f b7 cd 48 89 ab 90 03 00 00 44 89 ea 48 83 f9 1a 44 89 ad d4 03 00 00 0f 86 b4 00 00 00 48 8b 83 c0 03 00 00 <48> 8b 80 98 00 00 00 48 85 c0 0f 84 1d 01 00 00 48 89 df ff d0
    RIP [<ffffffffa04cd1e3>] radeon_driver_load+0x93/0x2c0 [radeon]
    RSP <ffff88015c163e38>
    CR2: 0000000000000098
    ---[ end trace aa456f50e680fe43 ]---
    grub :
    title Arch Linux [/boot/vmlinuz26]
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/mapper/VolGroup01-1 resume=/dev/mapper/VolGroup01-3 ro nomodeset vga=792
    initrd /kernel26.img
    /etc/modprobe.d/radeon.conf
    options radeon modeset=0
    packages used : libdrm-git and xf86-video-ati-git
    packages tested : libdrm and xf86-video-ati
    Please help me.
    Thanks

    Confirming, on Radeon M200 (r300) (ATI Radeon Xpress 1100) with and without KMS (modeset={0,1}). Resuming results in
    olvar wrote:a corrupted screen.
    Forcing VSync ON partially solves the problem (the screen is significantly less corrupted), but it cannot be used as a workaround.
    Looking forward to any solutions / bugfixes.
    There are also https://bugzilla.redhat.com/show_bug.cgi?id=468894 and https://bugzilla.redhat.com/show_bug.cgi?id=522070 but both are now closed
    That seems to be synchronization problem, maybe hsync?
    $ uname -a
    Linux dotdoom 2.6.35-ARCH #1 SMP PREEMPT Wed Sep 29 07:17:20 UTC 2010 i686 Mobile AMD Sempron(tm) Processor 3400+ AuthenticAMD GNU/Linux
    Also I'm having troubles with hibernation, it looks like trying to hibernate, but resumes immediately writing something to disk and then turns off. After power on it does not read the image, just makes a normal boot. Although I'm not sure it is related
    Last edited by dot.doom (2010-10-14 19:20:39)

  • System crash: RC410 [Radeon Xpress 200M], xorg 1.7.6-3

    Having used FreeBSD and Ubuntu, I installed Arch Linux on my Toshiba Satellite A-135 yesterday and have been trying to find out ways to prevent the graphical desktop environment (gnome) from crashing. In fact the whole machine freezes; No key sequence works. This happens as soon as any window is opened, be it by running the browser or the file manager.
    I have done some googling on this issue of faulty driver (xf86-video-ati) that seems to be due to ATI not supporting old hardware and the newer version of X's incompatability with it. Really, the notebook is not even that old. I purchased it in 2007. While I wait for the open-source driver to get fixed or find some other workaround, I am using the 'fbdev' driver having specified it in xorg.conf.
    I will be glad if anyone can post a workaround/solution that enables the using of the ATI driver. Thanks!

    The 'pci=nomsi' kernel boot option given in the ATI documentation page did it for me! One can find it and the details of the kernel bug here:
    http://wiki.archlinux.org/index.php/ATI
    My graphic card is precisely the one -- Radeon Xpress 200M -- known to cause system crash.  Besides, I am using Kernel mode-setting too. Thanks for documenting.
    Last edited by pawn_island (2010-06-19 21:23:24)

  • Best driver for dual-screen and 3D with Radeon Xpress 200M [solved]

    I need a good graphic driver for double screen and gaming, open source or old Ati one ?
    How I do install it correctly ???
    Note : catalyst could perform better for gamers ...
    Last edited by spiky25 (2009-11-22 23:53:01)

    Sorry for the mild thread necromancy.
    At what resolution do you run the external display? According to AMD/ATI, the radeon xpress 200m supports only up to 1600x1200, but I think I've used bigger displays with no problems.

  • Overclocking ATI Radeon xpress 1270

    Hi guys
    I have an msi notebook ER 710 with ATI RADEON XPRESS 1270 and i wonder if I can overclock the vga card. If any body knows how i can overclock it please give me some information and how can it be done?
    10x

    You can use Ati Tool ==> https://forum-en.msi.com/index.php?topic=107133.0 should able to do that.
    But however OC VGA notebook is not recommended.

  • Ati radeon xpress 200 series driver installing windows 8.1 pro black screen

    dell optiplex 320 running Windows 8.1 standard.  The display is listed as ATI RADEON XPREES 200 in the device manager. 
    It is using the driver provided by the operating system - ATI Technologies dated 10/2/2010 and version 10-2_legacy_vista32-64_dd_ccc and ATI_ATI-Radeon-Xpress-X1100_A03_R172873.  From a cold boot the blue Windows logo appears and then the mouse cursor
    in the middle of the screen, but the start screen with the tiles is not displayed.  Maybe this sounds weird, but I think the start screen and tiles is there, but just not being shown on the screen.  There appears to be nothing there, but I can move
    the cursor around on the black screen and click in frustration.  Then I press the power button and the laptop enters sleep mode.  Once in sleep mode I press power again to resume the computer and then the lock screen shows up and I can see the start
    screen and tiles and everything works like it should.  This only happens from a cold boot.  If the computer was on and restarted it does not happen.  Has this happened to anyone else?  Any suggestions?  I will check for a newer display
    driver from ATI.  The only driver on the Windows Update Catalog is for Windows Vista.

    mouse cursor in the middle of the screen, but the start screen with the tiles is not displayed.
    Usually it is nVidia users who complain of this.  An explanation would be that you are seeing your secondary monitor display in an Extended display configuration.  When you press Win- etc. it would show on your primary monitor (which you can't
    see).  So, press Win-P anyway and imagine that you can see its display.  Then you would press CursorUp, Enter and switch display configurations so you could see something. 
    only happens from a cold boot.
    Then there is a feature in a boot that makes this change.  Try using Win-P again when you can see it to see what the configuration is then.
    Robert Aldwinckle

  • ATI Radeon HD 4870 drivers

    Hi:
    I'm new to these forums so I hope I got the right category. I am interested in making sure that I have the latest driver for my graphics card, ATI Radeon HD 4870. I went to their website and the latest OS listed was 10.5. I called them and was told that it was Apple's responsibility for providing the latest driver, they had nothing to do with it. I then called Apple and they said that was nonsense, it is the manufacturer's responsibility for updating drivers and when available, they would automatically download it. Called ATI Radeon again and got the same answer. Does anyone know what the real story here is?

    Is there any software diagnostics out there for the ATI Radeon HD cards? I have an iMac 27" i5 and I believe that the video card is giving me some problems and want to run sometype of diagnostics before I take it into the apple store...
    Because when I take it into the Apple Store how are they going to be able to isolate the video card as the problem that I have...which is my screen turning off randomly. I have the new firmware for this, and before the new firmware was released I had NO problems.
    Any suggestions would be great!

  • ATI Radeon X1900 Xt Drivers for Leopard not yet provided

    Still waiting For Apple to provide Leopard level drivers for the ATI Radeon X1900XT graphics card. Problems are documented as horizontal lines on display and include periods of lockups but only when running under Leopard. Graphics card has been cleaned and reset and re-installed according to manufacturers specifications. They conclude the required drivers to support this card can only come from Apple.
    Backing off of Leopard is NOT an option. There are very few cards that fit this G5 (not a MacPro). I have never had this much trouble trying to get help. Assistance would be greatly appreciated.
    V Falzone

    Is it a retail card or OEM? someone mentioned their problem was resolved with drivers from ATI.
    http://ati.amd.com/support/drivers/mac/MacX1900G5Updater.html

  • On boot ATI Radeon HD 4200 drivers fail to load. To recover, must use System Restore

    I have an HP Pavilion p6737f with Windows 7 64-bit. No error message. No changes to system.
    When I boot the computer it comes up to a resolution of 800 x 600 which is the "rock bottom" of the spectrum for my computer. I check the device manager and it tells me that the driver - ATI Radeon HD 4200 failed to install on boot. In order to return to normal I have to do a "System Restore" to a time that I created. Otherwise, I can't use the higher graphic settings.

    Hi Tom,
    Reinstall the video driver using the HP Recovery Manager (drivers only).  The driver on the hard drive may be corrupted and then Windows will use the default VGA driver.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • ATI Radeon Xpress X200M 64MB - Do I need driver for my Satellite A series

    I had to have a new harddrive put into my computer, and now the device manager does not find the graphics card. It comes up under "Other Devices" and then it comes up as "Video Controller (VGA Compatible)"
    The drivers for this device are not installed. (Code 28)
    To reinstall the drivers for this device, click Reinstall Driver.
    How do I fix this?

    You have to install the graphic card driver.
    The graphic card driver can be found on the Toshiba European driver page.
    There you have to choose your notebook model to download the right driver.
    Unpack the driver package and install the driver. That??s all!!

  • Zen Kernel and new ati radeon oss driver

    Hey together!
    A few days ago I get new ati-driver from testing and since then, I can't start the xserver with the zen kernel and ums. I can use the normal kernel 2.6.33 normally.
    Here is my Xorg log:
    X.Org X Server 1.7.6
    Release Date: 2010-03-17
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.33-ARCH i686
    Current Operating System: Linux linux-laptop 2.6.33-ZEN #1 ZEN SMP PREEMPT Fri Mar 5 13:29:19 CET 2010 i686
    Kernel command line: root=/dev/disk/by-uuid/5394d0b7-4952-4f87-87bc-a4762f73b8c4 ro quiet
    Build Date: 18 March 2010 07:32:34PM
    Current version of pixman: 0.16.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:12:54 2010
    (II) Loader magic: 0x81e4c60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (--) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:5653:144d:e003 ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0xd0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
    (==) Using default built-in configuration (30 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default ati Device 0"
    Driver "ati"
    EndSection
    Section "Screen"
    Identifier "Builtin Default ati Screen 0"
    Device "Builtin Default ati Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default ati Screen 0"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default ati Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default ati Device 0"
    (==) No monitor specified for screen "Builtin Default ati Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AutoAddDevices.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "ati"
    (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    compiled for 1.7.5.902, module version = 6.12.192
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.7.5.902, module version = 6.12.192
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "vesa"
    (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 2.3.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
    ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
    CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
    CEDAR
    (II) VESA: driver for VESA chipsets: vesa
    (II) Primary Device is: PCI 01@00:00:0
    (II) [KMS] drm report modesetting isn't supported.
    (WW) Falling back to old probe method for vesa
    (II) RADEON(0): TOTO SAYS 00000000c0100000
    (II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (II) RADEON(0): Creating default Display subsection in Screen section
    "Builtin Default ati Screen 0" for depth/fbbpp 24/32
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules/libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Mobility Radeon X700 (M26) (PCIE)" (ChipID = 0x5653)
    (--) RADEON(0): Linear framebuffer at 0x00000000d0000000
    (II) RADEON(0): PCIE card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x144d SubsystemID: 0x5653
    IOBaseAddress: 0x3000
    Filename:
    BIOS Bootup Message:
    M26-P Samsung M26 Firenze ATOMBIOS BR14537/rel9.10.1.0/CL199610
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 358000
    (II) RADEON(0): Default Memory Clock: 345000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 500000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 200000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.32.0
    (==) RADEON(0): Page Flipping disabled
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
    (--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): PLL parameters: rf=2700 rd=7 min=20000 max=50000; xclk=40000
    (WW) RADEON(0): LVDS Info:
    XRes: 1280, YRes: 800, DotClock: 68900
    HBlank: 128, HOverPlus: 21, HSyncWidth: 32
    VBlank: 16, VOverPlus: 4, VSyncWidth: 4
    (II) RADEON(0): Skipping TV-Out
    (II) RADEON(0): TMDS PLL from BIOS: 16500 b0112
    (II) RADEON(0): Skipping Component Video
    (II) RADEON(0): Output VGA-0 has no monitor section
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): I2C bus "LVDS" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Port0:
    XRANDR name: VGA-0
    Connector: VGA
    CRT1: INTERNAL_DAC1
    DDC reg: 0x60
    (II) RADEON(0): Port1:
    XRANDR name: LVDS
    Connector: LVDS
    LCD1: INTERNAL_LVDS
    DDC reg: 0x1a808
    (II) RADEON(0): Port2:
    XRANDR name: DVI-0
    Connector: DVI-D
    DFP1: INTERNAL_TMDS1
    DDC reg: 0x64
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    Dac detection success
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    Backtrace:
    0: /usr/bin/X (xorg_backtrace+0x3b) [0x809f7db]
    1: /usr/bin/X (0x8048000+0x54715) [0x809c715]
    2: (vdso) (__kernel_rt_sigreturn+0x0) [0x7785e40c]
    3: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x83208) [0x772a9208]
    4: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3790c) [0x7725d90c]
    5: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3988b) [0x7725f88b]
    6: /usr/bin/X (InitOutput+0x5c8) [0x80ab048]
    7: /usr/bin/X (0x8048000+0x1a550) [0x8062550]
    8: /lib/libc.so.6 (__libc_start_main+0xe6) [0x7747db86]
    9: /usr/bin/X (0x8048000+0x1a2f1) [0x80622f1]
    Segmentation fault at address 0x7734f808
    Fatal server error:
    Caught signal 11 (Segmentation fault). Server aborting
    Can anyone help me? Thanks!

    When I install an old xf86-video-ati package from 27.02.2010, everything works. So the problem seems to be the new ati-driver.

Maybe you are looking for

  • How to display an image on reports 10g

    Hi all I have a database table that is composed of 2 columns:- Country_id NUMBER Country_Flag BLOB the table is populated with data. I made a report that display the country_id and Country_flag I Changed the "FORMAT_FILE" property for the field "COUN

  • XML parsing with SQL/PL-SQL

    Hi, My question is about how can an XML message can be best parsed using SQL/PL-SQL. The scenario is as follow. The XML message is stored in a CLOB; only some of its data needs to be extracted; there are six different types of structures of XML; the

  • Credit check only open billing item

    Dear Folks, Is it possible to do a creditcheck in the sales order on the basis of only open billing items and not at open sales order? Thank you very much.

  • Crystal Reports to Business Objects

    Hi Gurus, Please help me out with your valuable suggestions. Here is my scenario, Very recently my client implemented Business Objects for their Corporate reporting in place of Crystal Enterprise. There are about 400+ reports that to be converted in

  • Join condition in an update statement

    All, This is what I want to do update table1 set col1= (col2 from table 2) for each row. ie. Each row should be updated with the corresponding value in table 2. Please help. Let me know if more explanation is required.