ATI Raedon X1900 malfunctioning in 2006 Mac Pro 1, 1

Thanks in advance for any help I am in a bind!
The graphics card mentioned above is malfunctioning primarily when playing any type of video files. Specifically my display will cut off and any other display that is attached. I haven't noticed any visual problems with my monitors just that it appears when processing video files my monitor blacks out like the signal from the card is cutting off. I know it's not my display because it has done this on multiple displays including tv connection.
What I primarily want to know is if this is something that could be fixed (and any suggestions on where to start) or if I would be better off upgrading the card. I would have already purchased one (I've got the 5770 in mind) but I want to make sure that this will fix the problem or if another internal problem is causing the blackout.
Thanks again in advance!

In reply to myself - and others; of course,
     So I decided that the heat of the graphics was causing the malfunction. When Playing HD video within 20-30m would shut off completly. Upon inspection of this problem I physically felt the graphics card with my hand and, I didn't actually measure the temperature but, was probably in the 175 degree range, or more; I don't really know.
     I put a regular fan in front of the computer, with a high setting of 3, and pointed it directly into the computer (side panel removed) and what would you guess happened folks? It solved my problem! Unbelievable! Anyway I am very proud of this "temporary" solution and wanted to share my results.
     Since this discovery I have found the PERFECT fan that fits exactly into the side of the computer by slightly pulling out the 3rd driver bay and hanging this small high velocity fan from it that I got at True Value for less than 10 bucks!
If anyone is interested in the exact product I bought (available online or at True Value) and a picture of how I placed the fan onto the computer reply to this post and I will post a link that will provide all information.
Regards,
Eric

Similar Messages

  • Television and TV Recording with a ATI Radeon X1900 XT 512MB  equip Mac Pro

    I have been looking into a Mac Pro 2.66-3.0 Dual-core equipped with a ATI Radeon X1900 XT 512MB. One of the things I would like to accomplish is to also use the thing as a television and TV recorder (reliably). I have experience with the a PC equiped with a ATI9700pro all in wonder. I had nothing but problems with the software with hours (weeks) spent trying solve the issues. Turns out this is not an unusual thing with the ATI-Allinwonder. Thought I would check here to see whether anyone has input on how the x1900 works on the mac pro esp as a tv device.

    the elgato system is an external tv tuner that connects by USB. It has nothing to do with the graphics card in your mac.
    you can connect an antenna, cable, s-video or composite. Some of the models accomodate HDtv now.
    the results are clean, and i've had no problems.

  • Questions about ati radeon 2600 on an 2006 mac pro

    I know the debate has been going around for awhile about these cards, Apple claims that they are not supported but my card runs as long as you have leopard installed. So far the card has performed great, all my games and graphics programs run beautiful with it but I do have two problems. One is I can only have my display set at 1400 x 1050 any lower setting results in severe blurring on the screen. The other problem is that the text on my screen is some what pixelated and blurry.
    I was wondering if there is a fix for this problem or is it just the price I have to pay for running it on a 2006 mac pro.

    If it is a problem, and you can afford another upgrade, the Radeon 3870 might be your best choice.
    http://www.barefeats.com/harper17.html
    http://www.barefeats.com/harper18.html
    http://eshop.macsales.com/Item_XLR8YourMac.cfm?ID=10876&Item=ATI100435928

  • ATI Radeon 5770 in 2006 Mac Pro with Lion

    Hit an issue with my 2006 Mac Pro when the video card died in late October. At that point I was running Lion and had kept on top of software updates. Being on a restricted budget, I have purchased and installed an ATI Radeon 5770 card from the Apple store as I cannot afford a new Mac Pro. I knew that before I did this there may be incompatability problems with this card and Lion on the older Mac Pros, and this seems to be the case.
    However, having trawled through the forums it seems some users are able to run this card on 1.1 machines with Lion. So I am now wondering if I have another issue - I'd much rather stick with Lion if I can rather than revert to Snow Leopard. Now I have installed the card things seem fine with the display - the 30" cinema display no longer has blocks of pixels all over it. On boot up the screen is a pale grey, the Apple logo appears in the centre with the busy timer underneath. I also get a loading bar for about 20 seconds. This gets to about 20% then disappears. Everything sounds like the machine is booting normally but it just won't progress beyond this point. I have tried holding shift to boot it in safe mode but the same things happens.
    If anyone can help point me in the right direction of what I should try next I'd be profoundly grateful!
    Vinny

    I knew that before I did this there may be incompatibility problems with this card and Lion on the older Mac Pros,
    Although some users have complained of problems, their wounds may be self-inflicted. Use of a non-Apple ATI 5770 or failure to upgrade to at least 10.6.5 are high on the list. The main "issue", if you can even call it that, is the card runs more slowly than its published benchmarks due to PCIe 1 slots in the Mac Pro 1,2 and 2,1.
    I also get a loading bar for about 20 seconds. This gets to about 20% then disappears.
    That progress bar is indicative of unresolved Hard Drive problems. You need to boot to an alternate source of software (Hold Command-R at startup for Recovery_HD if you are running later than 10.6.8) and check the SMART Status and then select Macintosh_HD or whatever you renamed it and ( Repair Disk ). Repeat until all problems are resolved or it gets stuck. If you need help, copy the EXACT error message back here.

  • X1900XT not working in late 2006 Mac Pro.

    Hi, I'm new here, just created my Apple ID to post this problem on the forum for some info and advice
    I have a late 2006 Mac Pro which I ordered from Apple.com with the ATI X1900XT. I had the standard 20", LCD Apple Cinema Display which doesn't work anymore.
    Someone lent me a Phillips 190S LCD monitor to work meanwhile with my Mac Pro. So when I used that monitor I also upgraded from Tiger to Snow Leopard (can't remember how, if first Leopard and then Snow). It worked so so... some weird pixels flashing and sometimes the monitor image would freeze up, I'd shut down the Mac from the Power Button and start it again and keep on working like that. Until one day, image froze up, did the routine start-up but no image would show up on the monitor.
    I've already sent my Mac with a certified Mac tecnician, he told me the ATI X1900XT doesn't work anymore (along with 2 DIMMS, I know one was "fried", the other came as a surprise to me because the Mac seems to boot OK, initial Mac "chime" sounds and riser cards don't "light" a problem) and I need to buy another video card. I asked him for more options on video cards but he tells me he'll only assure success from his part if I buy the same ATI X1900XT model through him with his provider ($350+$20 shipping, I live outside the States).
    My questions are:
    - What other choices for video cards do I have with a late 2006 Mac Pro nowadays? (Not counting the nVidia 7300 GT, the Quadro FX 4500 or "flashed" PC cards. I read an old post https://discussions.apple.com/thread/2012005?start=15&tstart=0 in this forum on a similar topic but seems people were using Leopard, not Snow or Lion).
    - Is the use of a non-Mac monitor relevant to the detereoration of an ATI X1900XT card or any original Mac video card? I ask this because if I buy the same card again, I want to know if I can keep using the same Phillips monitor or buy a non-Mac monitor without worrying that it'll do something to the video card.
    Thanks in advance for any advice and info

    I have the same mac pro 1.1 as you do.  I bought it with the ATI X1900XT video card and it lasted only like 2 years , then the screen became garbled, pixel flashing,,,
    I replaced it with ATIRadeon HD 3870,  it has been working fine since then but that card is a little noisier than the X1900.
    I think you can also use some cards like this one from macsales.   You should just check that page and see what you find.
    Apple MC742ZM/A ATI Radeon HD 5770 Graphics Upgrade... in stock at OWC

  • 2006 Mac Pro Cold Boot Failure

    Hi all,
    I have problems with 2006 Mac Pro. It fails cold boot at 100%, first thing in the morning only. So I'm seeking expert advice.
    The spec is,
    Xeon 5355 2.66GHz x2 (Octo cores)
    ATI Radeon 5770(Apple Genuine)
    8GB Memory(4x1GB kingston, 4x1GB OWC)
    500GBx2 1TBx2 HDDs
    I disassembled and cleaned PSU and Fans, reapplying thermal pastes on CPUs and North Bridge a month ago.
    Then I booted, system froze at desktop, so I shut it down, reset PRAM & SMC. it booted normally but the upper riser card wasn't detected at all. I cleaned the slot contact and reseated DIMM modules. It was detected after that.
    Everything worked fine for a few days but then I got random kernel panics, reseated RAM, reinstalled Snow Leopard but still got random kernel panics. Then ran AHT for a couple of hours and got an error code 4MEM/6....
    I contacted OWC and they sent me a new set of memory modules. While waiting for the replacement, no kernel panics at all but DVD drive died as well as IDE cable, so I replaced both.
    I got the replacement RAM but past a week, MP fails cold boot every morning. Below is what's happening...
    (1) With Kingston Memory, CPU B error LED is lit, I press SYS_RST, one of DIMM LED is then lit (always DIMM A1). Or sometimes, Power-LED is blinking.
    (2) With OWC memory, boots normally, then kernel panic within a few minutes.
    (3) With OWC memory, CPU B error LED is lit, I press SYS_RST, one of DIMM LED is then lit (always DIMM B1)
    *(1) with new and old riser cards
    *(3) after replaced 2 riser cards
    Replacing riser cards didn't help. After these happen, I shut down by pressing power button for seconds and it boots normally without a hitch. Never get kernel panics nor system freeze. It means when it warms up, MP just works just like it should.
    Replaced so far,
    -- IDE cable (Apple Genuine)
    -- DVD drive (Optiarc AD-7200A)
    -- 4GB (1GBx4) OWC memory
    -- RTC battery CR2032
    -- 2 riser cards
    Is the logic board dead or PSU or memory modules are still bad?
    Any ideas?
    Thanks

    I have a Mac Pro dual 2.8 ghz quad core, circa 2008. Recently, I have been required to depress the power button to end a failed cold boot, then press again to boot, usually with success.
    Every hard restart freeze, and can guarantee you end up with
    corrupt caches, corrupt file system, corrupt directory.
    Safe Boot is not effective in such cases, fsck from single user mode has a better chance.
    Booting from another hard drive, install your bought copy of Alsoft Disk Warrior to rebuild the directory (it has deep scavenge files also).
    The longer you continue to do just Safe Boot and continue using it, the more trouble and less likelihood of being able to repair the drive.
    SMART is not smart enough, it tells you about the past, not what could likely happen, or if you have had bad sectors and I/O errors.
    Have bootable backup clones and a drive that is a clean Apple OS and drivers that isn't used except for repairs and maintenance. Don't rely on just Apple Disk Repair.

  • Are there internal hard drives available fo a 2006 Mac Pro?

    Looks like my original equipment 500 GB internal HD for my 2006 Mac Pro is dying.  Are there any repacement HDs out there?

    Over-due for upgrade it sounds like. Anything you want. SATA is SATA.
    SSD $100
    10K WD VelociRaptor $100 250GB (180MB/sec) or 1TB $200
    WD Black 1TB $93
    Generally, System drive / data and media drive / backup / spare sysstem drive
    WD Black 1TB $93
    http://www.amazon.com/Western-Digital-Caviar-Internal-Desktop/dp/B0036Q7MV0/ 
    WD Green 3TB $149 - backup
    http://www.amazon.com/Western-Digital-Caviar-Green-Desktop/dp/B004RORMF6/
    WD VR 10K 250GB $103 200MB/sec boot drive :
    http://www.amazon.com/gp/product/B007V5A1BK/
    Those last and last and make a nice boot drive.
    SSD: Samsung 840 128GB
    http://www.amazon.com/Samsung-Series-120GB-internal-MZ-7TD120BW/dp/B009NHAF06/
    ATI Radeon 5770
    http://store.apple.com/us/product/MC742ZM/A
    http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M 
    http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html
    And definitely upgrade and replace your RAM.
    How To Install and Remove Memory Mac Prohttps://support.apple.com/kb/HT4433
    2x2GB FBDIMM DDR2 667MHz @ $29http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
    Hardware Monitor
    http://www.bresink.com/osx/HardwareMonitor.html

  • Were there graphics card problems with the 2006 Mac Pros?

    I'm curious about the ATI 2600 graphics card issues occuring with the new Mac Pro's using Leopard...
    Did this just start occuring or were people also having problems with the NVIDIA GeForce 7300GT cards on the 2006 Mac Pro's while running Tiger?
    The reason I'm asking is my Dual 867 has finally given up the ghost and needs to be replaced and I have the opportunity to buy a new 2 Dual-Core 2.66GHZ Mac Pro with Tiger loaded in lieu of the newer, problem ridden models.
    Thanks for your responses.

    the 7300 has had no widespread problems.

  • 2006 mac pro 2.66 in need of an airport card!

    Hi Does anyone know which airport card or cards, as well as bluetooth, will work in an 2006 mac pro? I have read that MA688Z/B is the proper card. I have tracked down a MA688Z/A: http://www.macproonline.com/Mac-Pro-Tower/Mac-Pro-Tower-Parts/Mac-Pro-Tower-667M hz/Apple-AirPort-Extreme-p5636018.html
    Found this on Amazon: http://www.amazon.com/Apple-Airport-Extreme-Bcm94321mc-802-11n/dp/B004OHOTJS/ref =sr13?ie=UTF8&qid=1300723614&sr=8-3
    Can anyone verify which airport card to use for a 2006 mac pro model?

    Hi cmotta12,
    You might find this thread (Purchasing/Installing Airport Extreme card for Mac Pro 1,1 (2006) of interest:
    http://discussions.apple.com/message.jspa?messageID=12830939#12830939
    One important thing to note is that the official Apple Airport Card Wireless Upgrade Kits come complete with the two micro screws which are needed to install the card.
    These screws are not readily available, so ensure that they are included when you buy your Upgrade Kit.
    Regards,
    Bill

  • What video cards are compatible with my early 2006 Mac Pro?

    The video card currently in my early 2006 Mac Pro (2.6 GHz, dual-core) isn't fast enough for many of the recent games and I'd like to upgrade. I play games both on OSX Snow Leopard and Windows XP via Boot Camp. Is there a list of currently compatible cards available somewhere?
    Thanks.
    -N
    Neil Marsh
    Artistic Director * The Post-Meridian Radio Players *
    <Email and Link Edited by Host>

    No, not really.... but a couple of tips...
    1) when you're pulling the old card out, remember there is a black plastic retainer clip at the inner (front of computer) end. I didn't notice that, and now it's broken.
    2) Get the 5770 from Apple, not a big box store.... those don't come with the power cable you need and may not work.
    3) Plug the power cable into the mother board (?) first. It's fiddly, especially if you have big hands.... then plug it into the card, then slot it into the computer.
    There are demos on youtube, but they all seem to miss out the fiddly bits.....!

  • Why does my 2006 Mac Pro 1,1 crash on startup?

    Hi, folks--
    My 2006 Mac Pro is regularly crashing on startup with a kernel panic. It will chime on startup and usually show me the Apple startup screen with the spinning wheel-- but after that, I get the multi-language "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again" message. Sometimes it doesn't even get there-- the spinning wheel just freezes, and stays frozen. Every once in a while, the Mac will start up, but the mouse will be so unresponsive that it takes me several minutes to mouse over to Restart so I can try again. (I've checked the mouse on another computer and it works fine.)
    Additional info:
    • I have one SSD startup disk with Lion, and two HDD startup disks with Snow Leopard. Starting up with any of these three disks results in the problems described above. This suggests to me that it's a hardware problem, rather than a problem with a specific startup disk.
    • I tried starting up from my Snow Leopard Install disk. It was able to start up successfully. All the data on my hard drives seemed to be intact, including Lion Install, so I tried re-installing Lion on my SSD. It showed the blue progress bar for a minute. Then it said it would restart my computer in 30 seconds-- at which point, I once again got the multi-language "You need to restart your computer. Hold down the Power button ETC" crash. If even the install disk is crashing, this again suggests a hardware problem.
    • I set the Mac Pro to target mode, and used it as a startup disk for my wife's Macbook. It functioned just fine and there were no crashes. Again, confirmation that it is a hardware problem with my Mac Pro.
    • I have zapped the PRAM. I have also run Disk Utility, repaired permissions, and verified the disk. This did not fix the issue. (Not surprising if it is a hardware problem.)
    • HOWEVER:  I put in the install disk that came with the computer originally and was able to complete the Hardware Test. I chose the most thorough option. It did not find any problems.
    • This started happening three days ago. I'm not aware of any recent changes to the system that could have caused this. The most recent change I made was installing a Radeon HD 5770  graphics card and an SSD drive, more than a month ago. There was no sign of trouble after I installed either of them (except for some problems putting the Mac Pro to sleep, which is apparently a known issue with the Radeon 5770 in this model Mac Pro).
    • Weirdly, after I fiddle with the Mac Pro for an hour or so (run diagnostics, reboot it repeatedly, etc) it seems to start working. If there is indeed a hardware problem, then perhaps something works better when it's warmed up.
    Is there anything you'd suggest I try? Or am I stuck lugging it to the Genius Bar? I don't have a car, so this is a bit of a pain…
    Thanks in advance for any help you can give!

    Thanks, The Hatter. I'm working through all the links you've provided and see if I can narrow down the problem.
    And, Grant, thanks as well-- I really appreciate the specific information. You've enabled me to track down the panic log -- but they are indeed baffling. I'm pasting one below, in case somebody wiser than I can interpret it for me.
    Wed Mar  6 11:25:26 2013
    panic(cpu 2 caller 0x2ceabf): Kernel trap at 0x00baf978, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x8da19000, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x7db19000, EBX: 0x07eb6004, ECX: 0x0ff00000, EDX: 0x0ff00000
    CR2: 0x8da19000, EBP: 0x4469bc38, ESI: 0x0ff00000, EDI: 0x08feab04
    EFL: 0x00010206, EIP: 0x00baf978, CS:  0x00000008, DS:  0x00000010
    Error code: 0x00000000
    Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
    0x4469ba98 : 0x2203de (0x6b08cc 0x4469bab8 0x229fb0 0x0)
    0x4469bac8 : 0x2ceabf (0x6bd9e0 0xbaf978 0xe 0x6bd989)
    0x4469bb78 : 0x2e5564 (0x4469bba0 0x4469bb88 0x4469bb98 0x22cbbb)
    0x4469bb98 : 0xbaf978 (0xe 0x44690048 0xff1b0010 0x10)
    0x4469bc38 : 0x1547167 (0x8ad2c04 0x7eb6004 0xff00000 0x7eb6004)
    0x4469bc58 : 0x153e35c (0x7eb6004 0x8feab04 0x0 0xff00000)
    0x4469bc88 : 0xcb6c56 (0x7eb6004 0x9465004 0x4469bca0 0x0)
    0x4469bd38 : 0xd27c8a (0x7eb6004 0x9465004 0x8971c14 0xff)
    0x4469bdc8 : 0xd2933e (0x7eb6004 0x8a97c04 0x0 0x0)
    0x4469be28 : 0xd2b46a (0x7eb6004 0x8a97c04 0x8 0x2)
    0x4469be58 : 0x1562269 (0x7eb6004 0x8a97c04 0x0 0x0)
    0x4469be88 : 0xd2b589 (0x7eb6004 0x8a97c04 0x0 0x0)
    0x4469bed8 : 0xb9eb05 (0x7eb6004 0x0 0x0 0x0)
    0x4469bf68 : 0xb5362c (0x7eb6004 0x1 0x7c637f0 0x7c63be8)
    0x4469bf98 : 0x23e4ae (0x8af4400 0x7eb6004 0xfa6d03 0x7eb4028)
    0x4469bfc8 : 0x2c7d0c (0x84ad60 0x0 0x10 0x92f8410)
          Kernel Extensions in backtrace:
             com.apple.NVDAResman.G7xxx(7.0.4)[6581C9F3-3221-4530-BEB4-627CB8D602AE]@0xb4c00 0->0xe41fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8087C029-833E-4B62-A8C3-2B074B4C55F7]@0xade000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[393829BA-614C-4ED7-B4AD-CE577A41C683]@0xb3 b000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[EE3F8FBE-3457-4F0E-A3A3-B9B1A44DCF6B]@0 xb07000
             com.apple.nvidia.nv40hal.G7xxx(7.0.4)[C61073DF-524F-472B-A19F-3B80B884F6C5]@0x1 4b2000->0x15bdfff
                dependency: com.apple.NVDAResman.G7xxx(7.0.4)[6581C9F3-3221-4530-BEB4-627CB8D602AE]@0xb4c00 0
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
    Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
    System model name: MacPro1,1 (Mac-F4208DC8)
    System uptime in nanoseconds: 37415286581
    last loaded kext at 10244857365: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0x3125000, size 28672)
    loaded kexts:
    com.microsoft.driver.MicrosoftMouseUSB          8.2
    com.microsoft.driver.MicrosoftMouse          8.2
    com.microsoft.driver.MicrosoftKeyboardUSB          6.2.2
    com.microsoft.driver.MicrosoftKeyboard          6.2.2
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleHDAHardwareConfigDriver          2.2.5a5
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.kext.ATIFramebuffer          7.3.2
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.GeForce          7.3.2
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.GeForce7xxx          7.0.4
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.AppleMCEDriver          1.1.9
    com.apple.ATIRadeonX3000          7.3.2
    com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.CSRUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.CSRHIDTransitionDriver          4.0.8f17
    com.apple.iokit.SCSITaskUserClient          3.2.1
    com.apple.driver.XsanFilter          404
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleFWOHCI          4.9.0
    com.apple.driver.AirPortBrcm43224          501.36.15
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.driver.AppleIntel8254XEthernet          2.1.3b1
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleUSBUHCI          5.1.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
    com.apple.nvidia.nv50hal          7.3.2
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.nvidia.nvGK100hal          7.3.2
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.kext.ATI5000Controller          7.3.2
    com.apple.kext.ATISupport          7.3.2
    com.apple.nvidia.nvGF100hal          7.3.2
    com.apple.NVDAResman          7.3.2
    com.apple.nvidia.nv40hal.G7xxx          7.0.4
    com.apple.NVDAResman.G7xxx          7.0.4
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.driver.AppleFileSystemDriver          13
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.iokit.IOFireWireFamily          4.4.8
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.8
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4

  • Is there a way to install boot camp on a 2006 Mac Pro running Lion?

    Lion comes with Boot Camp 4, which supports Windows 7+. The 2006 Mac Pro however only supports Windows Vista, which requires Boot Camp 3.
    I can't find a download link for Boot Camp 3, only 4 and 5.
    Does anyone have an idea?

    It is on your original dvd that came with your computer. See the Boot Camp System Requirements located here: http://support.apple.com/kb/HT5634
    Look for your computer to determine what support software version is supported and where it is located.
    Mac model
    Windows 8, 64-bit
    Windows 7, 64-bit
    Windows 7, 32-bit
    Windows Vista, 64-bit
    Windows Vista, 32-bit
    Windows XP, 32-bit
    Mac Pro (Late 2013)
    5
    Mac Pro (Mid 2010)
    5
    5
    4
    DVD
    DVD
    DVD
    Mac Pro (Early 2009)
    5
    5
    4
    DVD
    DVD
    DVD
    Mac Pro (Early 2008)
    4
    4
    DVD
    DVD
    DVD
    Mac Pro (Early 2007)
    DVD
    Mac Pro (Mid 2006)
    DVD

  • Optical Audio not working on 2006 Mac Pro 1,1 after 10.6.7 update

    Hi all,
    I have no digital audio output on my 2006 Mac Pro after I updated to 10.6.7. System Preferences recognizes the output but their is nothing coming out. The digital audio port goes from steady red at startup to dark, indicating that it is not receiving anything. I have switched to another digital audio cable with no effect whatsoever.
    I reset the SMC with no effect. I have read online that other users are having this issue as well. I appreciate any input or insight into the issue.
    Thanks!
    Message was edited by: nomadmnemonic

    Thanks for the reply a brody.
    It has been 3 months and the issue still persists and has not gone away.  I agree with pantufl that my Mac has become buggier since 10.6.7.  The doc I read and reread didn't do anything except change the frequency rate.  There is still no sound.
    The update to 10.6.8 didn't resolve anything except prepping it for 10.7
    This is extremely frustrating especially since I recently upgraded to a 55" Samsung LED LCD monitor and Onkyo HT S7300 system.  I also recently upgraded to EyeTV HD and use my Mac as my HTPC. 
    I will try the feedback post to see what Apple has planned, if anything.

  • ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

    I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
    I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

    A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
    from: http://en.wikipedia.org/wiki/HDMI
    You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

  • I am selling my 2006 Mac Pro.  How do I reset everything so it is like it is just out of the box?  Eliminate passwords and such?

    Hello Everyone.  I am selling my 2006 Mac Pro.  How do I reset it so that the passwords are removed and settings are as if it is just out of the box.  Thank you for your help.

    Re: i want to bring my mac to the way i bought it how do i do that                                           

Maybe you are looking for

  • Using acrobat pro in word 2007

    I just upgraded to word 2007 and have acrobat pro 7.0.0. I can't figure out how to save a document as a pdf! Adobe Acrobat Pro shows up as an add-in in "word options" - Add-ins, but there is no add-in tab, and I can't find any way to actually use it!

  • Setup and flow of Excise duty in India Localization

    Hi all, Can any body tell me about the setup and flow of Excise duty in India Localization please. For eg: for Raw materials, Capital goods, Finished goods etc.. Thanks in advance Balaji

  • [NBUser]FileNotFoundException - File is in same folder!

    Hi I created a rudimentary program to test some functions in a game I'm developing: package TextRPG; import java.io.*; import javax.swing.*; import java.util.*; public class Dungeon1 implements Environment     public Map objects;     public ArrayList

  • Trying to install Photoshop Elements v6 on my Mac from original DVD.

    Trying to install Photoshop Elements v6 on my Mac from original DVD. Error message "Set up error Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance" I had inadvertantly binned the original copy of PSE 6.

  • Brake instructions in two or more lines

    Hello: Do you know how to brake a huge instruction line in two or more lines? thank you