ATI tvPortal green screen after 10.6.2 update

After updating my MacBook Pro to 10.6.2, when I run ATI tvPORTAL the TV display is green. I have an ATI TV Wonder 650 USB for Mac. It was working fine before (10.6.1). Anyone else having problems?

Same thing here. I already had OS X 10.6.2 and when I installed the original drivers for the TV tuner fm the CD that was included, I had good audio and marginal video. I ran the auto-update on the software and downloaded/installed the latest version of the ATI drivers. That resulted in the same problem everyone else has listed: green screen and audio on all channels. I too tried to back out the update and reinstall the original drivers and now have crappy video and no audio. Tried calling ATI and their help line refers you to a former component supplier who informed me they have no visibility on the Mac drivers for the new ATI tv tuners, and suggested I contact Apple.
It would be ideal if someone could come up with the fix on this issue.

Similar Messages

ATI TvPortal Green Screen After Update to Snow Leopard

Hi,
Is there any solution to this problem. I left messages at Diamond Multimedia and ATI and both
blame Apple for this problem.
Since the OS update my TV card is a plastic brick.
I would appreciate if you give me an answer to this problem.

Same thing here. I already had OS X 10.6.2 and when I installed the original drivers for the TV tuner fm the CD that was included, I had good audio and marginal video. I ran the auto-update on the software and downloaded/installed the latest version of the ATI drivers. That resulted in the same problem everyone else has listed: green screen and audio on all channels. I too tried to back out the update and reinstall the original drivers and now have crappy video and no audio. Tried calling ATI and their help line refers you to a former component supplier who informed me they have no visibility on the Mac drivers for the new ATI tv tuners, and suggested I contact Apple.
It would be ideal if someone could come up with the fix on this issue.

My new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

my new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.

If your computer doesn't see the phone when you plug it in, you may have to take it to an Apple Store.

Have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!

have reformatted my Imac using original discs (installed leopard (10.5)) tried to do the software update but it cant download the itunes update and when it gets to the configure update screen after restart for main update, it just gets stuck. HELP!
The configure bar gets about an 1/8 full and then just does nothing. I think its lists the update as combo update? cant remember with out checking.
I have tried to do the disk verify and repair but this has made no difference.
Please let me know what i need to do, I have reformatted the mac just to start over as was clogged with a lot of useless data, I had installed lion (10.7) from the app store previously and now cant seem to find a way to re install lion. I hope I dont need to pay for it again?

If you erased your hard drive, you'll need to reinstll OS X 10.6 Snow Leopard to access the App store. You won't have to pay for OS X 10.7 Lion again. Did you try booting to the recovery partition by holding the command and r keys down? If that's still there, you can reinstall OS X 10.7 from there.
If you're looking to install the current iTunes, you need OS X 10.6.8 at a minimum.
If you're still trying to update OS X 10.5 Leopard, you can download the combo update from here. Download, use Disk Utility to repair permissions, apply the update, then repair permissions again. That will take you to OS X 10.5.8.

27" 2009 iMac is stuck on white screen after OS X Maverick update

27" 2009 iMac is stuck on white screen after OS X Maverick update. How do I get past this White Screen? I have tried to use the PRAM reset, holding down Shift,Command, R, and P after turning off computer then when I turn it on, having those pressed until I see the apple symbol. I only hear one chime. Never get to a second chime. Thank you.

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

Can I change the background for the green screen after my project is completed?

Hello,
My daughter just made a full project in imovie then tried to add the green screen background and found that she has to redo the whole project. Is there anyway for her to add this after the fact?
Thank you,
Heather

If these are purchase movies and not rentals, from iTunes, on your computer, you can select the movie in iTunes, use the key combination command-I to get the info on the movie. A info window pops up. Click the Options tab, a volume slider appears at the top of the window, slide the slider all the way to the the right, click the OK button at the bottom of the window. Then reconnect and sync your iPad, again, to the computer and wait for the movie to update to your iPad, then once everything is complete, eject the iPad from the left hand pane and disconnect. When you play the movie, again, from the iPad, the volume should be louder.
I do not believe you can do this with rented iTunes movies, though as I do not think they are editable as a rental.

Black and green screen after water

Well I did this huge accident by dropping my iPhone 5 into the toilet, but it was only in there for 2sec. I dried the phone and it was still working, but after a while it turned itself off. As a reaction, I hurried starting it again to check if it still was working and it was. But after that, my friend told me to turn the phone off again as soon as possible.
When I got home, I placed the iphone in a bag of rice without any air in it, and waited over 24 hours to check it.
When I checked it(which I think I did too early)- it worked, and I was so happy! Everything, the sound was just fine, but after a while it didn't respond to my touches and suddenly the screen became black and green pixle-ish and grumsy, but I could still see something in the background.
I placed it back into the rice, but this time on my bathroom floor in a bag, because it's warmer there.
I don't dare take it out before I know that most of the water is gone, but at the same time I don't know what the problem with the screen was. Is it possible to fix it? I think I maybe can get some help from a friend, but it would be nice if anyone knew what i could do, or what the problem is.
I also read about people who got problem with black and green screen on their iPads. Everyone who read the thread had hit their iPads on the backside of the iPad and it got normal screen again.

Thanks, I will try that after a couple of days. I want to make sure that my iPhone is completely dry inside.
Anyone who knows how long it may take for an iPhone to dry inside after 2-3sec in water? Its in a bag of rice.

Green screen after-the-fact

I shot my subject without Vlog It -- with a camera and an empty (but lit) green screen behind him. Now I want to use the recording in place of a live person and run Vlog It. Is there a way to key in a background, add some supers, add the in/out graphics and music, etc. -- like a regular Vlog It session, but with the person on tape? Thanks, Jake

I shot my subject without Vlog It -- with a camera and an empty (but lit) green screen behind him. Now I want to use the recording in place of a live person and run Vlog It. Is there a way to key in a background, add some supers, add the in/out graphics and music, etc. -- like a regular Vlog It session, but with the person on tape? Thanks, Jake

Green Screen AFTER Edit?

I am using iMovie '09 to edit an interview with a green screen. The interview is already cut up and mixed in with still pictures. Is there any way I can still ustilize the green screen tool without having to re-edit since the proper order is to lay down your background first? Thanks in advance for your help.

There are some tools to transfer fcp7 projects to fcpX. Go the app store and do a search for 7toX. I haven't spent much time with fcpX. I did purchase 7toX but didn't have much luck transferring a project successfully. Might have been user error, might not, so I'd seriously suggest that you test your workflow before actually trying to use any workflow.

HELP! CS3 blank green screen after render. with video not stills

hey. it seems that i have the same problem that other users have found when they have lots of still photos in a timeline and that is once you render they are just replaced with a blank green screen. however i dont have any stills in my timeline and it happens to every project that i open. once i alter a clip whether it be a transition, effect or change in speed and then render it all i get is a green screen. i am pretty sure i have some kind of spyware virus on my computer but would this be able to affect premiere pro cs3 like this? i have tried all the tips given to people that have the problem with stills such as changing the opacity and increasing my computers virtual memory but none of this seems to be helping me. i really hope someone has a solution as i have about a years worth of footage stockpiled that i was just about to start editing but cannot do so. thanks alot.
Xander Beccari

First, work through the steps here http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed, report back with the DETAILS asked for in the questions at the end of that link

Is anyone else experiencing their phone randomly locking up and going to a blue screen after the most recent update?

iPhone 5s Random Blue Screen after last Update

I have had 9 iOS devices either just show the apple log and go black or a dead battery even thou they were on the chargers for hours.
I brought them to the Apple store. No one could give me an answer as to why it did it. All you have to do to fix it is do this:
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. ...
When you see this screen, release the Home button.
From the consensus of the people in my office that did the iOS 8.3 update. The ones that did the update while the iPhone or iPad was on a charger are not experiancing any issues. The ones that did the update without being on a charger are the ones experianceing the issues at hand.

Aspire R7 572G having a black screen after windows 8.1 update. What should I do

Hi all, Im wondering, anybody encounter this problem before, Im having trouble with this black screen after boot, it happened yesterday I think microsoft must have updated some of the drivers rendering my screen black after booting. Initially i thought it was my SSD but it turns out i can enter into Safe Mode. I read more about this problem related to other PCs, and try the recommended method of "disabling" the Intel GMA HD drivers. It worked, however, it only means the primary driver is now reduced to a standard video graphic card with limited vram. I have tried rolling back and even redownloading then reinstalling the intel driver into the version VGA_Intel_9.18.10.3215. The blackscreen after boot still occured. Did i miss something?

that's an old version of Intel drivers. try this, after uninstalling the old Intel driver:http://global-download.acer.com/GDFiles/Driver/VGA/VGA_Intel_10.18.10.3316_W81x64_A.zip?acerid=635194016643160700&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%20R7-572G&OS=81P1&LC=en&BC=ACER&SC=PA_6

Black flickering screen after 10.6.3 update

Hi,
Am using a Samsung 22" SyncMaster monitor with my 2009 Mac Mini connected via VGA with resolution 1680 x 1050 at 60Hz and after 10.6.3 update the screen flickers allowing me to see the desktop for around 1-2 seconds. Its really annoying but the only way to get rid of it is if i change the resolution to 1600 x 1000 also at 60 Hz but everything is blurry!
I checked the monitor manual and its recommended resolution is 1680 x 1050 at 60 Hz.
Does anyone else have this issue and is there a fix?!
Thank you.

Yes, I have the exact same problem.
I had this problem in 10.5.X as well. When I updated to Snow Leopard this went away. Now with 10.6.3 it is back again.
I worked around this problem in 10.5 by installing switchResX and playing around with the settings for the monitor... I haven't tried that in 10.6.3 yet.
I hope Apple fixes this soon. Being forced to use 3rd party software just to use the mac is unacceptable.

Why is there a iTunes icon with a USB cable on the screen after a Apple TV update

Why is there a iTunes icon with a USB cable on the screen after a Apple TV update

The iPad could be in recovery mode.
You may want to follow these instructions:
http://support.apple.com/kb/HT1808

G4 Laptop stuck on apple screen after 10.4.11 update

Laptop wont get past apple screen at start up after software update installed 10.4.11 from 10.4.10
Any advice or suggestions?

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.

ATI tvPortal green screen after 10.6.2 update

Similar Messages

Maybe you are looking for