Ati X1900 pulled from G5 quad, is it compatible with Mac Pro original ?

I had a G5 quad that had an Ati Radeon X1900 video card, which I purchased to allow the portrait feature.
At any rate, I've since purchased a Mac Pro and was wondering if this card is compatible with the Mac Pro 1,1
Thanks

No, G5 used different Open Firmware, while Intel Macs use EFI.
The ATI 4870 is, and no idea if 5870/5770 will be. But the OEM 7300GT is something you want to replace if that is what it had. An 8800GT would be nice.

Similar Messages

Is Lion compatible with Mac Pro Intel Quad Core 3.0 GHz x 2?

I couldn't find Lion requirements. Sorry to post the question.
In About this Mac it also says:
MacPro2,1
1.33 bus speed
8 GB RAM
1.5 TB hard drive
Currently on OSX 10.6.8
Thanks
Steven

Lion Specs:
http://www.apple.com/macosx/specs.html

Note regarding ATI X1900 XT with Mac Pro, Leopard

To all who are experiencing any of the frequently reported problems with the hardware/software combination listed in the subject heading:
I purchased the ATI X1900 XT as an upgrade fro my Mac Pro in January. I never experienced any issues with the card in OS X Tiger, but several months ago I began to experience overheating issues in Windows XP (Boot Camp) when playing graphics-intensive games. The overheating caused visible graphics corruption/artifacts, graphics system resets and even spontaneous system restarts. The frequency and severity of these symptoms actually increased over time, leading me to believe that the card was either defective or that the overheating was causing degenerative/cumulative damage to the graphics hardware.
I recently upgraded to OS X Leopard, and all **** broke loose. Immediately after upgrading, I began to experience frequent graphics corruption/artifacts (in the form of spurious horizontal lines), system lockups/freezes and spontaneous system restarts. None of these issues were present in Tiger. The system became completely unreliable and essentially unusable.
It was initially a popular belief that Leopard's graphics drivers were somehow buggy or incompatible with the X1900 XT. After my experiences, I don’t believe that’s the case. I think that the issues reported are symptomatic of hardware, not software problems. Leopard is merely a catalyst. Leopard's increased leverage of OpenGL stresses the graphics hardware in ways that Tiger did not, causing an overall increase in graphics hardware temperature. I believe that the glitches/artifacts/system freezes/restarts that I experienced were not due to buggy drivers, but due to the graphics card overheating as a result of the increased load placed on it by Leopard.
I brought my X1900 XT in to my local Apple store today and asked for a replacement. Fortunately, they had one in stock, and they gave me a new card on the spot. The technician was apparently well aware of the issues, and mentioned that they have had a lot of similar problems with new iMacs.
Since installing the new card, I have experienced no graphics corruption, system freezes or spontaneous system restarts, either in OS X Leopard or in Windows XP gaming.
I would urge anyone who is experiencing problems with the X1900 XT (in either Windows or OS X) to have their card replaced by Apple - assuming that their card or system is still under warranty, that is.
I suspect one of two possible scenarios is true:
Theory #1: The Rev 1 X1900 XT is inherently flawed and has problems with overheating, which is exacerbated in OS X by upgrading to Leopard. Due to Leopard's greater leveraging of OpenGL, there is increased thermal stress placed on the card relative to Tiger. The overheating is evident in Leopard as graphics corruption/artifacts, system lockups/freezes and spontaneous restarts. The Rev 2 X1900 XT has (theoretically) corrected the problems inherent in Rev 1.
Theory #2. The thermal management system of the X1900 XT (all revisions) is inherently flawed. The card will slowly cook itself over time, and the effects are degenerative and cumulative. As the age of the card increases, so will the occurrence of graphics corruption, system freezes and spontaneous system restarts, especially when playing graphics-intensive games or running OS X Leopard.
I sincerely hope that Theory #1 is the case. I’ll be watching my system closely as I continue to use the new card, and hopefully there will be no further problems with overheating.
If theory #2 turns out to be true, then Apple has a huge PR nightmare on its hands, as each X1900 XT for the Mac is essentially a ticking time bomb that will self-destruct within months of purchase.
The funny thing is, this isn’t the first time I’ve had graphics card trouble with one of Apple’s “professional” towers. I bought a G5 several years ago when they were first released. I had problems with the stock nVidia graphics card in the form of what came to be known as the dreaded “black screen of death.” This became a commonly reported issue, experienced by many owners of the G5 in its first revision. Apple replaced my card and the problem never reoccurred. I’m hoping that I’ll be as lucky this time around.
I think it’s apparent that Apple’s batting average with graphics cards isn’t exactly stellar. It’s curious, considering that Apple offers a very limited selection of graphics options for their towers. One would think that by Apple only offering 3 graphics options, they would be able to have fairly tight control over the quality of the hardware, and plenty of time and resources to devote to testing. Unfortunately, I’ve had more graphics hardware-related problems on my Macs than any PCs I’ve ever used. That’s embarrassing, and Apple needs to do much better than this.

I replaced my G5 Quad with a Mac Pro 8-core. The Mac Pro's thermal design is far superior to the G5's. The G5 Quad's liquid cooling system has a much bigger task (IBM doesn't publish the thermal dissipation numbers on their PPCs but I suspect they are high) than the more efficient Intel Xeons. The G5 liquid cooling units are troublesome and the issue is something I think Apple is quietly solving by replacing failed liquid cooled G5's (that are still under warranty) with Mac Pros (a very smart PR move). My primary concern when I switched to a Mac Pro was issues with the X1900 XT graphics card failure rates posted on the web and in these discussions. The very latest generation of the X1900 XT (July 2007) are reported to be more reliable. Many G5 owners are still reporting failed cards. Given the much higher thermal environment and the remarks in this thread, I can now see why. The interior of a G5, especially Quad, gets too hot for this ATi card. I had the nVidia GeForce 7800 GT in my Quad. That was a very good card. Still, the issues with the ATi x1900 XT may indeed be a thermal design issue that AMD may need to either address directly, or turn to a 3rd party solution.
I installed a 3rd party cooling alternative, Arctic Cooling's Accelero S1. It's a passive system that replaces that hairdryer fan with a large heat sink. The package includes upgraded heat sinks for the power regulator (much beefier than the stock), and for each memory chip. The heat sink is a large conductive cooling assembly that uses 4 heat pipes. The vendor claims that using this system increases the case temperature by 1°C, which is easily handled by the system cooling system. So far, their claim appears to be valid. Since there's no longer a fan, you can imagine how quiet the system has become. The only installation hitch is that the black support clips were made for the PC version and the Mac Version adds a beefy support rail on the spine of the card. The workaround is to trim off the lower tang of the clips so they just rest against the support rail.
After reading this, I'm tempted to add the "Turbo" option, a couple of high volume low speed fans that fit on the radiator. I'm trying to "stress" the system by running SETI@Home 24/7 while doing all the other work to see how hot and how loud I can get this system. So far, no disappointments. This is the quietest workstation I've ever worked on. Even when "hot", the fans are not loud. The passive cooling system seems to work very well. I left Star Wars-Empire At War up and running in the menu for hours one day and it didn't seem to suffer from any ill effects. I have owned this system for just over a month. I will add more thermal load after I crank the system memory up to 24 or 32 GB. If there are any real cooling issues, I will find out about them next summer. I really dread the prospect of plunking down another $2k for the nVidia 4500 FX (I really don't need the 3D audio support) to get comparable video support.

HT4818 Boot from laptop's Windows Hard Drive in Mac Pro via Boot Camp

I have a work laptop that is on Windows 7. It's a work hard drive so I don't want to mess with it (particularly as it's encrypted). I basically want to use it on my Mac Pro rather than my piece of junk standard issue laptop when I'm working from home.
What I would like to do is pull the drive out, put it in my Mac Pro and boot from it using Boot Camp. Guidance I've seen so far talks about not being able to use an external drive but having to partition an internal drive. However, if I've got everything on a separate drive (i.e. my laptop's drive), will this work?
Thanks!

Thanks for the quick (and no nonsense) response!

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

How can I boot from USB 3.0 disc on a Mac Pro 2013

I am just setting up a 2013 Mac Pro with a 4TB USB 3.0 external drive. I have cloned my boot disc over to it but have problems being able to boot from the USB drive.
It shows up in the startup disc in system preferences, but when selected as the boot disc and restarted it just boots from the internal SSD. Also have checked booting and holding the ALT key to see what happens but I am just shown the SSD and Recovery disc as options to boot from.
So it appears I can not boot from a USB disc on my new Mac Pro, is there a solution to this problem?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Will a FCP 3.0.4 upgrade from FCP 1 load onto a new Mac Pro

Will a FCP 3.0.4 upgrade from FCP 1 load onto a new Mac Pro. I have tried loading in onto a mac book with no luck. I think its because my original FCP 1 loades using OS9 and because the new Mac Pro does not have an old operating system on it I cant load my original FCP.

You should upgrade to FCP 5.1 or 6 as Jerry says.
However, if you are desperate you could try this :-
Install just your FCP 3 upgrade and also put in your FCP 1 serial number when asked.
Whenever you try to open FCP you will probably get an error message. Click the "esc" key and FCP should open.

Does xavc long from a pxw x70 camera work with premiere pro cs6

Does xavc long from a pxw x70 camera work with premiere pro cs6

Take a look at this plug-in

Does anyone know how to remove the fisheye effect from a gopro camera, remove it with premiere pro c

Does anyone know how to remove the fisheye effect from a gopro camera, remove it with premiere pro cc.

Use the Lens Distortion effect, set curvature to your liking.

How to download photos from Straight Talk LG L86C phone to Mac Pro

How to download photos from Straight Talk LG L86C phone to Mac Pro?
(I am a novice!)

Mac OS X has an awesome built-in application for this purpose called Image Capture
You will find it in your Applications folder on your Mac.
If your USB device is connected, you should see it in Image Capture as well adn download the images.
Image Capture can also connect to scanners, digital cameras, USB drives, you name it.....

I am from myanmar and I would like to order iphone 5s contract free from T-mobile . is it compatible with my local GSM carrier ?

I am from myanmar and I would like to order iphone 5s contract free from T-mobile . is it compatible with my local GSM carrier ?

You should go onto the Tmobile web site and look around. Very soon a pop up window will ask you if you want to chat. You can try asking for someone who knows Spanish (if you prefer), they might have someone available who can chat with you in Spanish.
I give this suggestion because I remember on the Tmobile website, you can order on line, but they let you choose to pay only a little money up front, then pay off the rest over 24 months, or you can choose to pay for it in full. However, their ordering process does not say whether the paid for in full phone is going to be unlocked or not.
It may not be, You may have to make a request and say that since you have paid in full please unlock. I am not so sure that a paid for in full phone is automatically sold in unlocked state.
This is why I suggest you talk to Tmobile to get a definite answer.
Unless someone else on this forum knows for sure? Hope someone else jumps in to answer. But the best way is to ask for yourself directly from Tmobile.

ATI Radeon X1900 XT, Apple Upgrade Kit vs. BTO Option (Mac Pro 1,1) - Same?

This question pertains to the ATI Radeon X1900 XT Video Card, which Apple offered as a BTO Option for the Mac Pro 1,1.
In September 2007 I purchased my Mac Pro 1,1 (2x Intel Xeon 3GHz Woodcrest) and configured it from Apple with the ATI Radeon X1900 as a BTO Option.
Now I know that a number of people initially experienced some problems with this card, but mine has worked perfectly all along. I run FCP, Aperature, and Adobe CS3, and the X1900 has performed excellent.
Leading to my question:
I own more than one Mac Pro 1,1. But the other two machines were not configured with the X1900. And for the past couple of years, I've been regularly searching to find (one or more) Genuine, Original Apple ATI X1900 XT Video Cards - either for sale by someone who has pulled out the X1900 from their Mac Pro 1,1; or, from an Official Apple Reseller. However, all that I've been able to find are - what appear to be either a "knock-off" third party version of the X1900 (flashed for Mac Pro), or; people and/or resellers who claim they are selling a Genuine, Original Apple ATI X1900 XT; except there's one major difference between all of those other video cards, and my X1900 (BTO from Apple, Mac Pro 1,1).
My X1900 does not have an S-Video Port. However, all of the other X1900 cards I've seen advertised for the Mac Pro are pictured with an S-Video Port - which again, mine does not have one.
I've spoken with both Apple Technical Support and Apple Care Representatives (Sr. Advisors), and I've asked them whether it's possible to identify a Genuine, Original Apple X1900; either by the serial number, or possibly by an Apple Part Number.
The Mac Pro 1,1 "Tech Specs" are listed on Apple's Support Site (support.apple.com/kb/SP30). Here, Apple does provide an Apple Part Number for the X1900 as an upgrade (MA631Z/A); however, nobody from Apple can tell from that part number - whether that Apple Part Number corresponds to an X1900 with an S-Video Port, or whether it's identical to the X1900 that was offered as a BTO Option for the Mac Pro 1,1; or whether that particular X1900 was part of an "Upgrade Kit" for the X1900 - which would've been available to purchase from Apple (Apple Store), sometime late in 2007 and/or early 2008. Further, I also know that Apple changed the actual Service Part Number a few times for the X1900.
What I'm trying to find out:
Has Apple ever directly sold, or, has Apple ever officially offered the X1900 w/ S-Video Port - under one of the following Apple Service Part Numbers (661-3297, 661-4335, 661-4911)??
Sorry for the super-long post.
It's just that this has been bugging me for like two years.
Thanks,
John

When I write, I often find that I end posts with what I wanted to say. Put summary at top helps.
What I'm trying to find out:
Has Apple ever directly sold, or, has Apple ever officially offered the X1900 w/ S-Video Port - under one of the following Apple Service Part Numbers (661-3297, 661-4335, 661-4911)??
I don't know. I do know some X1900s are being replaced even if out of warranty, as are 2600s also.
For $249 the ATI 5770.

Horizontal lines with Mac Pro 1,1 and ATI Radio X1900XT

I love my Mac Pro, I've had it since 2007. But recently, I have been having a video problem and I hope somebody here might have some advice or suggestions.
_The Problem_
Large horizontal lines going across the screen - especially when it is displaying quickly moving images. These horizontal lines move upward, as if trying to refresh the image. Examples: playing a video, scrolling down a webpage, rearranging windows.
_My computer setup_
I have a Mac Pro 1,1 with ATI radeon x1900 graphics card. I am using two displays, and experience the following problem on both displays. My displays are set up as follows:
*Display 1:* Acer H234H, uses male DVI to male DVI connection
*Display 2:* Panasonic TC-37LZ85, male DVI to male HDMI cord > HDMI coupler (i.e. 2 both sides female) > male HDMI to male HDMI cable
Both are using 1920x1080 screen resolution.
I don't think this is an issue with either of the individual monitors for 2 reasons:
(1) both of them do it
(2) the Acer has a very fast response time (2 ms) yet it also has the problem.
Suggestions, comments, ideas, and "hey me too"s are welcome and appreciated.

Thank you for your answer; I followed your suggestions:
The card is working fine in terms of spinning and is not dusty.
I booted from the Mac OS Installer DVD, and couldn't replicate the problem. But I don't think that's a good indicator, because this problem is intermittent and doesn't manifest itself consistently. Also, there's no way of playing video or scrolling down a webpage from the Installer DVD.
Also, I tried switching the two display connectors around (plug 2 to plug 1 and vice versa), which caused something interesting to happen: I stopped seeing vertical lines but started getting WEIRD flickering and green artifacts. Again, this happened on both screens.
The Apple Hardware Test said everything is fine (weird).
I think I'll try your suggestion of re-installing the OS. I always dread doing it. But hey maybe it'll make my computer run fast again (it's been running slowly lately).
Cheers, thanks for the suggestions, and I'll post back regarding what happens next.

Restore Time machine backup from a stolen computer to a different Mac Pro

*My Mac Book Pro was stolen.* It had some Time Machine backups, but Time Machine had stopped working about 6 months before it was stolen. I had stopped using the USB drive since TM would never complete. (2 issues)
1. When I plugged in this USB backup disk to the Mac Pro just now, it asked me whether to use Time Machine with it. It told it no, ask me later so I could browse it first.
2. It looks like the old problem with Time Machine not backing up the stolen laptop shows up as a file called "2008-09-22.204132.inProgress". I am hoping that the backups previous to that one are okay. So far, browsing the files appears to me that my data is intact but perhaps spread across 40 folders.
So now, what should I do to retrieve the data I want?
A. Copy the data files and pictures manually without Time Machine? How do I know I will get the latest versions?
B. Use Time Machine with this disk and somehow ask TM to restore to a different machine? (Is that even possible?) (Will it merge the files into my user folders?)
C. Use Migration Assistant?
D. Copy and paste the entire file structure to a directory someplace and pull off the data as I need it?
*End result: I want my external hard disk wiped ASAP, and in the meantime I want my data files preserved.*
The old MacBook Pro definitely did not have Snow Leopard but the MacPro does to which I want to copy the data. It probably had Leopard. But honestly my user data is not necessary, just primarily the data, pictures, DVD projects, etc.
As a side note: My old laptop and my MacPro used the same username and password.

lhbilly wrote:
*My Mac Book Pro was stolen.* It had some Time Machine backups, but Time Machine had stopped working about 6 months before it was stolen. I had stopped using the USB drive since TM would never complete. (2 issues)
1. When I plugged in this USB backup disk to the Mac Pro just now, it asked me whether to use Time Machine with it. It told it no, ask me later so I could browse it first.
2. It looks like the old problem with Time Machine not backing up the stolen laptop shows up as a file called "2008-09-22.204132.inProgress". I am hoping that the backups previous to that one are okay. So far, browsing the files appears to me that my data is intact but perhaps spread across 40 folders.
So now, what should I do to retrieve the data I want?
start Migration Assistant located in /Application/Utilies. it has an option to migrate your data and applications from a TM backup. migrate what you want. note that users will be migrated to new users so to access your old home directory you'll have to log out and log in as the migrated user.
A. Copy the data files and pictures manually without Time Machine? How do I know I will get the latest versions?
B. Use Time Machine with this disk and somehow ask TM to restore to a different machine? (Is that even possible?) (Will it merge the files into my user folders?)
C. Use Migration Assistant?
D. Copy and paste the entire file structure to a directory someplace and pull off the data as I need it?
*End result: I want my external hard disk wiped ASAP, and in the meantime I want my data files preserved.*
The old MacBook Pro definitely did not have Snow Leopard but the MacPro does to which I want to copy the data. It probably had Leopard. But honestly my user data is not necessary, just primarily the data, pictures, DVD projects, etc.
As a side note: My old laptop and my MacPro used the same username and password.

Erratic wakeup from sleep after 10.9.2 - 2012 Mac Pro

I completed the most recent OS X upgrade yesterday on my 2012 Mac Pro and now "wake from sleep" seems to work erratically (much more often not waking up and requiring a reboot). Occasionally a quick push of the front panel power button will produce results. Nothing else has been changed on the computer so I can only believe that this upgrade has been the cause.
Anyone else having this problem? Suggestions or things to reset/check?
KWO
Mac Pro 2.8 quad-core
dual HP LP2275W monitors
OS X 10.9.2

If you have the Mac Pro (late 2013), Check for these INSTALLED versions:
EFI (Boot ROM) firmware update, an SMC firmware Update, and a 10.9.2 Update:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac OS X Mavericks 10.9.2 Update (combo)

Ati X1900 pulled from G5 quad, is it compatible with Mac Pro original ?

Similar Messages

Maybe you are looking for