ATI X1950XTX/CrossFire is out! Could that explain MacPro X1900 delays?

Well after all it seems ATI X1900 order delays could be X1950 related!
ATI introduced new cards:
X1950XTX/CrossFire
X1900XT/256Mb
X1650Pro
http://enthusiast.hardocp.com/article.html?art=MTE0NCwxLCxoZW50aHVzaWFzdA==
Main thing for shure is LOW NOISE! Fan is said doesn't even move at idle!!
EDIT:
MSI,Gigabyte,Sapphire,Asus pages were updated just minutes later!

...or maybe there is just so much demand that they need to produce enough of them first
Though I would prefer that Apple is delaying because of the newer card and lower noise, that's always a bonus.

Similar Messages

I know this isn't really the right place to ask, but could someone explain why when I open Portal 2, that I got off steam and spent a whole day downloading, keeps crashing when I click the Campaign/Single Player mode. It Freezes and then crashes. Help!

I know this isn't really the right place to ask, but could someone explain why when I open Portal 2, that I got off steam and spent a whole day downloading, keeps crashing when I click the Campaign/Single Player mode. It Freezes and then crashes. Help!

I know this isn't really the right place to ask...
Uhm, why don't you go to the right place, then? There are several Steam/Portal forums out there...

I created a new Apple ID for iCloud on my iPhone, but I can't seem to find a way to "sign out" or "log out" of that Apple ID (for iCloud) to sign in with another Apple ID. The only account login I could change was the Store. How do I "log out"

I created a new Apple ID for iCloud on my iPhone, but I can't seem to find a way to "sign out" or "log out" of that Apple ID (for iCloud) to sign in with another Apple ID. The only account login I could change was the Store.
How do I "log out" or "sign out" of iCloud on my iPhone? There is an option to delete the account, but I just want to log off. I want to keep the account name for future use.

@fernandamagalhaes
It looks like the article below has the information you are looking for.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, go to Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Note: If you delete your iCloud account, iCloud will no longer back up your iOS data. You can still back up your device in iTunes (for more information, open iTunes and choose iTunes > Help).
On your Mac, open iCloud preferences, then click Sign Out.
If your Mac has OS X v10.7.5 and you turn off iCloud, your calendar information and reminders aren’t stored locally in iCal. If you want to retain your calendar and reminder information, you need to back it up before turning off iCloud. For more information, see the Apple Support article iCloud: Calendar & reminder data removed from Calendar and Reminders or iCal when disabling iCloud Calendar.
On your Windows computer, open the iCloud Control Panel, then click Sign Out.
Note: If you turned on automatic download of music, app, or book purchases (in iTunes preferences or in Settings on your iOS device), your iTunes purchases are still downloaded to your devices.
Set up iCloud on your devices

My Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

my Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

Try the basics from the manual.
restart.
reset.
restore.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Could someone please explain to me how to set-up my Apple ID so that both my password AND security questions have to be answered before access is granted? Is this possible? I am not very computer smart, so could you explain step-by-step!Very Appreciated!

Could someone please explain to me how to set-up my Apple ID so that both my password AND security questions have to be answered before access is granted? Is this possible? I am not very computer smart, so could you explain step-by-step!Very Appreciated!

The security questions will only be asked on the first purchase on a computer or device (though people have occasionally posted that they've asked for them when it isn't the first time) - I'm not aware of any way to change that. You can force the password to be required on your iPad via Settings > General > Restrictions > Require Password set to 'Immediately' (the default is a 15 minute period during which it doesn't need re-entering)

Could someone explain me about tools like "RICEF"

Hi Guys,
Could someone explain me about tools like "RICEF"(I dont know if iam spelling it correctly) and ASAP methodology. Iam wondering how this are related to SAP upgrade and fresh SAP implementation.
Many thanks in advance.
Warm Regards,
Garrick.

Hi
It would be helpful to go through the help document of ASAP Methodology.
The following information may clarify some doubts/requirements you have.
Generating the Project IMG through ASAP:
After you have set the project scope, the next step is to generate the Project IMG. From the Business Process Master List (BPML), you can directly access the IMG activities relevant for configuring each process.
BPML: The Business Process Master List, along with the Business Blueprint, is a key result of the second phase of the Roadmap. Microsoft Excel tables contain the SAP scenarios, process groups, and processes that have been set in scope in the SAP Reference Structure, and are crucial for configuring your SAP System. In Realization, the third phase of the Roadmap, the BPML provides the basis for monitoring and steering test activities and for configuring your SAP System. It contains the titles of the structure items, and displays the status, the owner, links to documentation and links to the SAP System. Amongst other things, the BPML allows you to:
1) Set your baseline and final scope. These are used for baseline and final configuration.
2) Access the Project IMG and specific IMG activities assigned to structure items.
3) Access integration test plans, which help you carry out all required integration tests.
The Prerequisite is you have set the project scope.
Process Flow to use the Business Blueprint as a basis for configuring your SAP System:
1) Set the project scope.
2) Generate the Project IMG.
3) Generate the BPML.
4) From a specific processes in the BPML, you can go to the relevant IMG activities and make Customizing settings.
Hope this information provides information
Check the following link for downloading the complete reference document on ASAP.
http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/SVASAP.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SVASAQADBCBI/QADBCBI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SVASACCT/SVASACCT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SVASAPROZ/SVASAPROZ.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SVASQADBS/Q&ADBSTRUCSTAN.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SVASAPE/SVASAPE_01.pdf
Regards

Could you explain these terms more?

Could you explain these terms more?
PINs
RELOADs
INVALIDATIONs
SQL> desc v$librarycache
Name                                                                  Null?    Type
NAMESPACE                                                           VARCHAR2(15)
GETS                                                                  NUMBER
GETHITS                                                               NUMBER
GETHITRATIO                                                                NUMBER
PINS                                                                       NUMBER
PINHITS                                                                    NUMBER
PINHITRATIO                                                                 NUMBER
RELOADS                                                                    NUMBER
INVALIDATIONS                                                               NUMBER
DLM_LOCK_REQUESTS                                                          NUMBER
DLM_PIN_REQUESTS                                                            NUMBER
DLM_PIN_RELEASES                                                          NUMBER
DLM_INVALIDATION_REQUESTS                                                NUMBER
DLM_INVALIDATIONS                                                          NUMBERFrom the Oracle® Database Reference, I get the following interpretation:
PINS :      Number of times a PIN was requested for objects of this namespace
PINHITS:      Number of times all of the metadata pieces of the library object were found in memory
RELOADS:      Any PIN of an object that is not the first PIN performed since the object handle was created, and which requires loading the object
from disk
INVALIDATIONS: The total number of times objects in this namespace were marked invalid because a dependent object was modified
But I still cannot understand the following these terms clearly. Could you explain them more?
PINs
RELOADs
INVALIDATIONs
More over, I don't think the previous interpretation of INVALIDATIONs is precise. In my view,the interpretation should be: the times of Library cache misses happened because invalidations occurred due to DDL on the dependant objects.
What is your opinions?
Thanks

Loads - Number of times the object has been loaded. This count also increases when an object has been invalidated.
# Gets - Number of times the system requests handles to library objects belonging to this namespace
# Pins - Number of times the system issues pin requests for objects in the cache in order to access them.
# Reloads - Number of times that library objects have to be reinitialized and reloaded with data because they have been aged out or invalidated.
Invalidations - Number of times that non-persistent library objects (like shared SQL areas) have been invalidated.
more information
http://vsbabu.org/oracle/sect13.html
OCP Oracle 9i Performance tuning Study guide BPB publications.

Our school will soon be requiring ipads. Is there a video available that is interesting for ages 9-15 that explains the basics of how it works?

I have been struggling to find an exciting and informative video for students ages 9-14 that explains the basics of how to use an iPad. Everything that I have found either teaches coding of is very slow moving and more appealing to adults. If anyone could point me in the right direction, it would be greatly appreciated!

not a video...
Joe Rowe's Excellent guides
Quick help presentation for students:
     https://docs.google.com/presentation/d/18937JdleX2gymtSb8zfbDczV-76BdR2DIfCV9eJi yOE/edit#slide=id.g1b776944_0_224
for the administrator.
IT managers who are new to configurator and managing a cart of ios devices:
      https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
         [ original announcement -- https://discussions.apple.com/thread/4256735?tstart=0 ]

Could somebody explain to me how to set up a VPN on my iMac and access it on iPhone and computer?

I'm mainly using it to bypass an internet block. Could you explain in detail how to set up a vpn that will also work on iPhone? Do you have any recommended applications for me to install? Thank you

To run a public VPN server behind an NAT gateway, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
If your router is an Apple device, select the Network tab in AirPort Utility and click Network Options. In the sheet that opens, check the box marked
Allow incoming IPSec authentication
if it's not already checked, and save the change.
With a third-party router, there may be a similar setting.
4. Configure any firewall in use to pass this traffic.
5. Each client must have an address on a netblock that doesn't overlap the one assigned by the VPN endpoint. For example, if the endpoint assigns addresses in the 10.0.0.0/24 range, and the client has an address on a local network in the 10.0.1.0/24 range, that's OK, but if the local network is 10.0.1.0/16, there will be a conflict. To lessen the chance of such conflicts, it's best to assign addresses in a random sub-block of 10.0.0.0./0 with a 24-bit netmask.
6. "Back to My Mac" on the server is incompatible with the VPN service.
If the server is directly connected to the Internet, see this blog post.

Where can I find documentation that explains how

I would appreciate it very much if somebody could tell me
where can I find a documentation that explains how is it possible to customize the <jbo:ShowHint, similar to the way custom renderers customize <jbo:RenderValue...?
Thx

A try at google with sufficient keywords often reveals the answer.
My estimate is 60-80% of the questions posted here can be solved by constructing a good google search, and take some time to read the hits.
Of course experience with using linux helps (to choose the rights search keywords)
To the original poster: there is a very valuable command called 'man', which means 'manual'. if you need information about commands, use the manual, for example: man lsto learn about the 'ls' (list) command. also try man manthe manual page about the manual pages command.

Document that explains the differnce between CRM 3.0 and CRM 5.0

Hi,
Please, do you have any power point or pdf presentation that explains delta functionalities between CRM 3.0 and CRM 5.0.
If you could send to me I would appreciate a lot.
Best regards,
Xavier de Toca

Hello Xavier,
I would suggest that you check the <a href="http://service.sap.com/ /~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000429833&">Release Notes</a>.
Regards
Gregor

I have an iMac 27" which is 4 years old and probably overdue for a clean-up. Is there any good reliable software out there that would help? Has anyone had any experience of 'Mackeeper'?

I have an iMac 27" which is 4 years old and probably overdue for a clean-up. Is there any good reliable software out there that would help?
Has anyone had any experience of 'Mackeeper'?

Check how many applications are starting when you log in, I found that if there was a lot of activity at login Finder did not display the icons on the desktop correctly, again like you it did not occur at every login, just occasionally.
For Safari have you tried resetting Safari, if that does not help you could disable plugins and extensions one at a time. You may find one of those is causing the problem.

Could you explain how the read-write-backing-map-scheme is configured in...

Could you explain how the read-write-backing-map-scheme is configured in the following example?
<backing-map-scheme>
    <read-write-backing-map-scheme>
     <internal-cache-scheme>
      <class-scheme>
       <class-name>com.tangosol.util.ObservableHashMap</class-name>
      </class-scheme>
     </internal-cache-scheme>
     <cachestore-scheme>
      <class-scheme>
       <class-name>coherence.DBCacheStore</class-name>
       <init-params>
        <init-param>
         <param-type>java.lang.String</param-type>
         <param-value>CATALOG</param-value>
        </init-param>
       </init-params>
      </class-scheme>
     </cachestore-scheme>
     <read-only>false</read-only>
     <write-delay-seconds>0</write-delay-seconds>
    </read-write-backing-map-scheme>
</backing-map-scheme>
...Edited by: qkc on 30-Nov-2009 10:48

Thank you very much for reply.
In the following example, the cachestore element is not specified in the <read-write-backing-map-scheme> section. Instead, a class-name ControllerBackingMap is designated. What is the result?
If ControllerBackingMap is a persistence entity, is the result same with that of cachestore-scheme?
<distributed-scheme>
            <scheme-name>with-rw-bm</scheme-name>
            <service-name>unlimited-partitioned</service-name>
            <backing-map-scheme>
                <read-write-backing-map-scheme>
                    <scheme-ref>base-rw-bm</scheme-ref>
                </read-write-backing-map-scheme>
            </backing-map-scheme>
            <autostart>true</autostart>
        </distributed-scheme>
        <read-write-backing-map-scheme>
            <scheme-name>base-rw-bm</scheme-name>
            <class-name>ControllerBackingMap</class-name>
            <internal-cache-scheme>
                <local-scheme/>
            </internal-cache-scheme>
        </read-write-backing-map-scheme>

Could u explain the business process

hi guru's
could u explain the business process scenario , how it works in bw . could u explain detailed, suppose to take CLINT NOKIA MOBILE AND MY EMPLOYER SOME XX COMPANY,
CAN U EXPLAIN DETAILED?

Hi Prabha,
Aggregate Definition :
An aggregate is a materialized, aggregated view of the data in an InfoCube. In an aggregate, the dataset of an InfoCube is saved redundantly and persistently in a consolidated form on the database.
Use
Aggregates allow quick access to InfoCube data during reporting. Similar to database indexes, they serve to improve performance.
An aggregate is made up of the characteristics and navigation attributes that belong to an InfoCube. Characteristics that are not used in the aggregate are compressed.
Each component of an aggregate has to be assigned to a selection type. A selection type indicates the degree of detail to which the data in the underlying InfoCube is aggregated. You can choose one of the following selection types:
All characteristic values ("*"): The data is grouped by all values of the
characteristic or navigation attributes .
Hierarchy level (H): The data is grouped by the hierarchy level node. You can
also store values on the hierarchy levels of an external hierarchy .
Fixed value (F): The data is filtered by a single value .
For each InfoCube, you can set whether the aggregates of the InfoCube are compressed automatically when it is filled with data or after the roll up of data packages (requests).
1. You are in the Data Warehousing Workbench in the Modeling functional
area. In the InfoProvider tree, navigate to the required InfoCube.
2. In the context menu of the InfoCube, choose Manage.
3. In the lower part of the screen, select the Roll Up tab page.
4. Under the Aggregates group header, set the corresponding indicator in
the Compress After Roll Up field.
Standard Aggregation : This means how the key figure is going to be summarized normally for a specific set of characteristics .
Eg : Quantity across all the purchase items for a purchase Order
Exceptional Aggregation : You define how the aggregation should happen basing on a particular characteristic ( Usually time characteristic ) .
Eg : head count ( No of Employees ) in a organisation ..--> this should not be summarized on a daily basis..instead this should give a final value at the end of the month .
Aggregation is basically for keyfigures .
take a look at this doc, you will find all your answer:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbd2d390-0201-0010-8eab-a8a9269a23c2
Refer this for aggregates
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
Aggregates versus Physical Cube Splits?
http://help.sap.com/saphelp_bw33/helpdata/en/c5/40813b680c250fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ca/aa6437e7a4080ee10000009b38f842/frameset.htm
Question1: how we will see the based on aggreagate what querys are running
I think "aggreegate maintance screen ---proposal -
query proposal" i am right ,if it is worng pls correct me?
Answer 1:
There are two tools that are used to analyze which aggregate is suitable for which navigation step.
You optimize the start screen of a query with the query Monitor (transaction RSRT) if you execute the function Execute + Debug.
With the trace tool (transaction RSRTRACE) you can draw several navigation steps, and process them again using the function DB Debugging (exact path: Transaction RSRTRACE > Goto > User Logs or All Logs > double-click on the log you want > DB Debugging).
Refer The OSS note 99010
Question 2: When i am creating a aggregate what charteristics we choose i mean based on report/some thing else?
Answer 2:
By refering the Statistical data and comparing the Proposed Aggregates we can create the aggregates.
The above RSRT and RSTRACE will be more useful tools to plan an Aggregate.
Refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a67abe07211d2acb80000e829fbfe/content.htm
and other option is:
Refer page 36 in this PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
Question 3:
When we are crearting a agreegate one message box will apper in that we one option "proposed aggregate" wht does it mean how it work??
Answer 3:
Based on the Statistical data and query-aggregate data system will propose the new aggregate definitions.
Question 4:
under what senario we apply for query performance aggregates??
Answer 4:
Refer this PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbd2d390-0201-0010-8eab-a8a9269a23c2
For more info refer:
http://help.sap.com/saphelp_nw04/helpdata/EN/7d/eb683cc5e8ca68e10000000a114084/frameset.htm
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D133%26threadID%3D51253%26messageID%3D526450%23526450
You have a aggregate document by SAP in http://service.sap.com/bi -> BI Infoindex which would answer all your questions.
http://help.sap.com/saphelp_nw04/helpdata/en/7d/eb683cc5e8ca68e10000000a114084/content.htm
It would be very useful for you to go through the performance tuning with aggregates documents here:
Business Intelligence Performance Tuning [original link is broken]
Look at the thread below for index:
Indexes, Aggregates , partitioning of cube
Hope this helps.
Regards,
Ravikanth

Could someone explain why mds is using so much CPU?

Could someone explain what mds is doing if my Mac has been indexed (don't see activity in Spotlight menu bar icon) & I haven't recently added a lot of files?
I noticed my Mac was slowing down for a while so I looked in Activity Monitor & it says mds is running at 60% CPU. Isn't this something to do with Spotlight indexing?

If you recently upgraded the OS or installed an application that includes a metadata parser for spotlight (such software generally comes in the form of a package instead of a single icon), it will force spotlight to reindex. Also, restoring from a backup does the same thing.
Also, if you used mdutil to disable spotlight indexing on the volume and then reenable it, it will force a reindexing.

ATI X1950XTX/CrossFire is out! Could that explain MacPro X1900 delays?

Similar Messages

Maybe you are looking for