ATIx1900 and driver issue

hi everybody out there
i have a MAC Pro 8 core - 4 gb ram - ATIx1900
i'm running winzozz xp sp2 via bootcamp on my mac pro and i'm trying to playing some games :\
the windows installation through bootcamp was easy and winzozz it's working ok.
I installed Ghost Recon Advanced Warfighter 2 but the game doesn't start, it crash and return to windows while is loading give me this error:
Crash in application version: 30292.2673
Unhandled exception - access violation
C STACK:
DINPUT8: DirectInput8Create
graw2: ???
Renderer: threaded
Physics : threaded
Running the game hardware detector it says the video card drivers are too old (v. 6677); so i tryed to download some new drivers from ATI website but it didn't work and on the apple site the drivers are dated 2005 O.O ?.? -.-'
Is there any chance to update the video card drivers?
Am i doing something wrong?
Many thx in advance for your help

There are threads on x1900 and BootCamp, on display issues, and updating. Also over in the BootCamp Beta forum.
ATI's latest x1900 Catalyst driver looks to be May '06.
When was the game last updated?
Maybe it, and BootCamp 1.3, doesn't 'know' or properly recognize your logicboard, an 8-core system.
"It didn't work."
doesn't give a lot to go on. Did you uninstall and then restart and install? I know Nvidia has improved driver update process in the last two updates (monthly).
I am using Vista 64-bit so I don't even know if SP2 is up to what you need and run on your system.
AMD has Boot Camp only drivers
http://ati.amd.com/support/drivers/mac/bootcamp-xp.html
You could try the x1900 driver and Catalyst which are newer
http://ati.amd.com/support/drivers/xp/radeonx-xp.html
FWIW I use native Nvidia driver from July 26 on OEM 7300 GT in Vista.

Similar Messages

Display and driver issues with Windows 7 on i5 MBP

Hello-
I just purchased one of the i5 Macbook Pros, and set out to get Windows 7 working through boot camp. I did this on an older model (32-bit) previously with no problems.
This time around, installation of Windows worked fine, but I have had some trouble getting all the drivers working. The setup.exe program on the OS X DVD didn't want to run at all, I had to do a workaround from the command line that I found on a forum (otherwise I just got a response of "Bootcamp x64 is unsupported on this computer model").
Eventually I got (at least some of) the drivers to work, but there are still some issues.
After installing the drivers, things like brightness and two-finger clicking started working. A number of other things still aren't, though:
- Display: My machine has a 1440x900 screen. But for some reason Windows refuses to go higher than 1280x800.
- Network: No wireless at all. Windows doesn't detect any wireless capability, and only gets on-line via ethernet.
There may be other issues, but these are the big ones. Can anyone provide suggestions on what to do to get everything working?
Thanks!

I just used winclone to move my Win 7 from my Core2Duo MPB to an i5 MBP and had to do a few updates and have eneded up in pretty much the same place as you. I won't bother installing from scratch. I'm guessing we just need to wait for some bootcamp updates for these new machines.
For those of you who are looking to migrate your bootcamp partition over, winclone made it easy - I followed the directions for resizing and Win7 boots, does a disk check, then installed many of the new drivers automatically. There are some drivers that are still needed however, wifi and video. I also so a USB driver issue but have to look at that a little closer before I comment.
Best of luck,
Simon

Printing Banners and Driver Issues

I have recently updated some family tree stuff and wanted to print this off on a multi page banner. I have 2 HP printers a Photosmart 5520 and a P1102W laser printer and neither appear to give the option to print a multipage banner.
After a search it was suggested by someone that the driver for the Deskjet 6980 would work on the 5520 however I cant find it to downoad anywhere.
I have a macbook running osx 10.8 and all the option say to upgrade drivers via the software update feature but given I dont currently have a deskjet 6980 then I cant get the upgrade (even the HP site for the driver doesnt seem to have a driver to download)
Is there a way to get an updated software for any of the printers I have that would let me print a banner or get a compatible driver that will?
Seems a bit weird that the printer I had 15 years ago let me print banners but these new ones won't
Anyway, I hope someone can help
Best reagrds
Scott
This question was solved.
View Solution.

Hello scm256. I understand you are having banner printing and driver upgrade issues.
In terms of banner printing, only our higher-end printers are almost guaranteed to possess that capability. I will post the specifications of both the printers, so you can review the supported paper sizes and types:
Photosmart 5520: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5157533&spf...
Laserjet P1102W: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01999607
In terms of updating the drivers, you are probably experiencing that the printers you own do not possess any driver updates at this time, especially an older printer like the Deskjet 6980. Also, there likely will not be a driver update for banner printing, for any printers that do not originally support it.
Please let me know if you have any other questions or concerns. I'm only here to help!
Mario
I worked on behalf of HP.

MZen Micro Software and Driver Issue

I'm operating with the following and have not been able to link to Creative site or computer for several years, just able to play existing songs.
- Zen Micro V.0.03
- Vista 6.0 Build 6002 Service Pack 2? 32 bit
- Windows Media Player .0.6002.83
If anyone can help me with which drivers and SW that I need to upgrade to it would be appreciate. I fear I may have to upgrade initially on an XP system and then again on Vista. If someone can help me with this it would be greatly appreciated.
Jim

(Re: MZen Micro Software and Driver IssuesHere's what is stated in the firmware details. ?
IMPORTANT:
Be sure to back up all the audio and data files on your Zen Micro before installing this firmware update as all content will be lost when you install the new firmware. After installing the firmware, use Windows Media? Player 0 to restore audio and/or data files to your player.<
This firmware will currently ONLY work on Windows XP or Windows XP Professional x64.<
Installation of this firmware may take up to 5 minutes, and your device may reboot a number of times during installation.<
Software updates are required if you want to use any currently installed applications like Creative MediaSource?, Zen Media Explorer, or other track management tools with your player.<

Formating to Win7 VECD and driver issues

I have recently formated my booklet 3g to win7 vecd for enterprise issues.
After reinstalling all the drivers I've found that just the 3G option modem usb driver doesn't installs correctly, the driver listed from the nokia->support webpage.
Eitherway, in the option webpage, with my IMEI i cannot find the method to download the globetrotter connect 3.1 since it is a "secured" file. I have also tried to download the software that my mobile provider gives to me, but it doesn't work neither. Also tried to install the driver from the option webpage for the option 382E embedded device, and still is not recogniced...
I have my sim inside the SIM slot... but in the device administrator from windows 7, its says that there is an "unknown device" under the USB tab.
I don't know what shall I do now in order to find a solution for this.
Thanks in advance for any possible solution
Regards
Solved!
Go to Solution.

Up to today, I've tried multiple choices in order to make this work.
Still find in the Device Adminsitrator: "unknown device", under the USB controllers. I expect this to be the 3G/GPS modem, but not sure, since is the only thing not working still on my laptop.
Ive tried using drivers version 5.1.32, 5.1.33 even a driver for 382 made for a laptop Acer Timeline, with no success...
Thing is I have tried also uninstalling the unknown device driver, and rebooting computer, but still comes back the same driver... this done with all the drivers downloaded so far.
Under the drivers folder for the "official nokia-option" set, appears some like:
GtGps.inf
gthsmdm.inf
gthsndis.inf
I've tried to installed them manually but then, the device gets stuck with no response. I'm starting to believe that maybe the usb modem is broken, or doesn't support the windows 7 enterprise edition. But that is pretty strange, since is a 32 bit edition, and all version are based on the same type of software... then starting to believe the first thing.
My booklet is branded with Spanish Movistar provider, and I have a Movistar SIM into the slot, so I should have no problems of SIM locks or anything like that (even it doesn't even recognice the modem).
This is kind of frustrating since is the only thing left for me to have the booklet working great

WoW Wireless Headphones Mic and Driver issue

I know a lot of people have issues with the mic sounding muffled to others. One thing i noticed is that the default sample rate is 16000 Hz (Tape Recorder Quality). Is this my only option becuase I feel that is my issue. My destop mic is set at 48000 (DVD Quality). I cant believe there is not a way to change this. I have updated the firmware but dont feel that did much at all.
The other thing I wanted to mention is the driver date. I downloaded it on the website where it says released March 23 2010, yet when I go into the actual driver its date is December 9 2009. Is it really that old.

Are your headphones showing up as the default playback device? I have an X-FI Titanium and the headphones connected and my Titanium is usually my default for my speakers. In Windows 7, I usually go to control panel and sound, and there I choose the WoW as default and this solves my issue.
Windows usually chooses the first device listed in control panel until you choose another default.

USB and Driver Issues

Hello!
I recently received a bunch of new devices for Christmas - a digital camera, MP3 player, etc., plus I just bought a BlackBerry this week.
The problem I'm having with all of these devices is my Compaq Presario CQ60 Laptop will not connect with these devices. It works fine with my mouse and my printer, but those are drivers I had installed right when I got the computer.
Although I installed the drivers using disks or website files for all of these other devices, when I plug them in the computer does not recognize them. It tries to install the driver then says pops up with the "device driver software was not successfully installed".
The devices themselves also act as if they are connected to the computer for about 1-2 seconds, then act as if they aren't. My Kodak camera won't even turn on if it's plugged to the computer. The BlackBerry turns itself on and off of charging mode but I manage to back it up when I run the software.
This happens with all 3 USB ports.
And under My Computer the devices don't show up if they are plugged in. Again, it works fine with things that worked with the computer before the problem started, which as far as I can tell was before the holidays.
Any advice? Thanks!

Thanks,
tcam22 wrote:
420US
This would be the first thing to consider as I have no knowlege of which, if any, service pack for Vista you have installed.
Have you gone to the support web page for your laptop and applied the Windows Essential updates that are recommended by HP? Here is a direct link to the HP web support document. There are hotfixes for numerous issues included in the updates which are specifically for your laptop.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Weird glitch noise and driver issues

Hi, recently i bought a probook 450 g2 and i have the following problems:
1) I get an error code 28 and can't find the needed drivers to install
Here is what i see on my screen: PCI bus 0, device 31, function 6
Also i got 3 unknown devices
2) The second issue is I keep hearing some glitching noise from time to time when i watch videos or listen to music. I have read that this may be caused by the HP Support Assistant, but i didn't install it.
Any feedback would be appreciated.

Hi:
You need these drivers...
ACPI\HPQ6007:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_132986_1&swEnvOid=405...
USB\VID_138A&PID_003F:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_134806_1&swEnvOid=405...
ACPI\INT33A0:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_143428_1&swEnvOid=405...

Reinstall of Win XP Pro on T42 help = Device and Driver Issue

Hi All, need help. Recently I re-installed Win XPro on a T42 Type 2373 ThinkPad. Prior to doing a re-installed all devices were working(just 3 days ago). Wireless and Ethernet. After a clean installed the systems does not see ethernet or wireless device. I checked Device Manager and I get the famous "? Other Devices" for Ethernet Controller. I have installed all the driver listed on
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-55386
Still systems does not recognize device. Devices are ENABLED in the BIOS. Device Manager does not show Wireless device and Ethernet. I was able to install video, sound, & modem. So here I am stuck unable to connect to internet via LAN or Wireless. I am lost for words. Any help would be greatly appreciated.
Thanks

Solved: after downloading the driver I actually had to go to the location of the file and click on the SetUp and it worked.
After downloading and opening the exe file i assumed (and we know what that does) that was all i needed to do. It seems that also have to then open the folder that this file unpacked to and click on the setup file (which i didn't realise was there).
http://forum.thinkpads.com/viewtopic.php?t=66278

HP Designjet Z3200ps Constantly on "Pause" and Driver Issue

Hello.
I have a Z3200ps 44-inch, which goes to "Pause" all the time and doesn't allow to print at all. Also I cannot see Paper/Quality menu in printer driver window.
HP Printer Monitor shows the printer to be "Idle", which is its normal state.
All the drivers are up-to-date and I tried to reinstall them, as well as resetting the printing system - it just doesn't help.
Any ideas?

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Enterprise Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

ATI driver issues and slow video playback

I just reinstalled Arch and I installed the ATI drivers, at first I couldn't get them working but when I did, video in full screen was amazingly slow, so I tried installing ati-drivers-arch, as someone in the boards suggested but after that each time I start X, it would crash my computer, so right now I am using the standard vesa driver to even start X.
Also when trying to resize mplayer (while using -vo gl) it says my computer is too slow. And VLC has no speed issues but the quality of the picture is very poor.
I am running:
AMD Athlon 64 3200+
ATI Radeon X800 GTO
1.5 gb of DDR RAM
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "dell101"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2" # PS/2 Mouse
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "ati"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 48.5
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "ati1"
Driver "vesa"
# unsupported card
VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ati1"
Monitor "ati"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
A big thank you to anyone who can help!

It doesn't look like xorg 7 has been installed. The latest kernel 2.6.15 needs xorg 7, udev, and initrd .
I may be wrong but my xorg is much smaller in size and fonts are handled differently in the latest kernels.
Please see the blogs concerning the upgrades to the xorg 7 changes.

Can you use a Mac Mini to share documents between several devices? iPhones, MacBooks, iPads, etc...? We are a home based business with several locations across the state and are having Google Drive issues, looking into Mac Mini options.

We are having Google Drive issues (some files won't sync) and it's causing us trouble with our business communication. Is there any way to use a Mac Mini to share documents between two people in different areas similar to google drive? Would this just be done through iCloud?

If you use Numbers, Pages and KeyNote it si very easy to sync those document among all the Apple devices. You need montain Lion on the Mac and at least iOS 5 on the mobile devices.
I show those document on my Mac, iPad 4 and iPhone 4S

How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

Question
How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" if you want to restore multiple windows. 
You can use "Firefox > History > Restore Previous Session" to get the previous session at any time. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

ImageCLASS D1120 Windows 8.1 driver issues and MF Toolbox problems

I'm having some real problems getting several imageCLASS series multifunction units to work in the windows 8.1 x64 environment. most recently, I've been working with a D1120, and I can't get it to do any more than print reliably - no scan functionality at all. I realize there are two issues here, so I'll try to break them apart as best as possible. For reference purposes, i'm running windows 8.1 on a 64-bit system. I was able to download the correct drivers and program from the canon website, and extracted them with no issue.
On the driver problem, I tried using the instructions found in this link, but windows went ahead and installed the 2009 series drivers regardless. It's connecting via USB, and doesn't give me any option to update the drivers once "installed".
On the MF Toolbox problem, I've gotten it to do one one scan job, and then it starts throwing a variety of error messages at me. First, it will say there is a data transfer error. Then it will say there are no documents in the queue. Then it will simply lock up and not start the scan job at all. I tried using the instructions in this link, but didn't get anywhere.
Any way you can help on one or both of these issues? I have a feeling they are related somehow...
Z

Hi merliner.
I will be glad to assist you.
The drivers may not be installed correctly because the Windows operating system is automatically installing the driver. First, we will need to disconnect the printer from the computer and uninstall the drivers. Since the drivers are being installed by the Windows system, I recommend uninstalling the drivers from the 'Print Server Properties' window. Please follow the instructions below:
1. Open the [Devices and Printers] window.
2. Left-click, one time, on the Microsoft XPS Document Writer or the Send To One Note devices.
3. Click Print Server Properties in the Menu Bar. (You will see "Add a device", "Add a printer", "See what's printing" and "Print server properties".)
4. Click on the [Drivers] tab.
5. Select the Canon drivers, then click [Remove].
6. Select "Remove Driver and Driver Package".
7. Click "OK". (You may receive a message stating that the Package could not be removed. This is fine. As long as the driver is deleted from the list, you can continue.)
Once the drivers are deleted, restart the computer. After the computer restarts, and leaving the USB cable disconnected, please follow the instructions below to install the drivers that you downloaded from the Canon USA website:
The file that you download from the Canon website is .ZIP file. When you select [RUN], it unpacks the setup folder.
1. Please open your [Downloads] folder.
2. You will see two icons with the name: D1170_1150_1120_MFDrivers_W64_us_EN.exe . Double-click on the yellow folder icon with this name.
3. In the folder you will see two listings for [Setup]. Double-click on the [Setup] that has the type as [Application].
4. The "MF Drivers Setup Wizard" will open. Proceed through the steps and restart the computer.
After restarting the computer, connect the USB cable and allow the installation to complete. Finally, scan a document by following the instructions below:
1. Verify that MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
2. The screen will show, "Scanning mode...".
3. On the computer, open the MF Toolbox and select [PDF].
4. Click the green [START] button on the [PDF] window. The machine will start processing the scan.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Toshiba Satellite a505-6005 hard drive issue and questions regarding options I may have

Issue: start up computer and windows does not start. It eventually goes to a startup repair screen and eventually says "resolving disk errors...", and that's if it even gets to that screen. Unfortunately I never made a recovery disk or system image discs (I know that was not smart). I did however kept my files backed up so that was good.
Steps I took: Took it to Best Buy and the tech advised me that the Black Tie 2 year protection had expired on Jan 30th 2012, and so it could not be repaired for free. I asked the tech there how much it would cost to fix and they had advised me that it was most likely a hard drive issue and that it would cost nearly $400 to replace/fix it. So I decided to buy a new Asus K53E-BBR14 laptop since it was not much more. When I got home and loaded everything up and got the computer to how I want, I went ahead and made a recovery disc and system image disc's. I tried using the recovery disc that I had made with my Asus in the Toshiba laptop and boot it from the dvd drive and it did not get anywhere. So I ASSUME that it really is a hard drive error because the RAM worked just fine in my new laptop and "repairing disk errors.." means something is wrong with the hard drive:
Now that you know the background of what has happened my questions are as followed:
1. Can I buy a new hard drive for the Toshiba and use the recovery and system image disc's i created on the new hard drive that i install in the toshiba? and just removed the bloatware from Asus (or does that not even get added to the disc's I created)?
2. If so, will it prompt me to enter the Windows 7 product key? and therefore using the product key located on the bottom of the toshiba?
3. What other steps could I take to make this toshiba laptop salvageable? This way i can turn around and sell it.
Thanks,
Russell States

Also,
I noticed that i can purchase (well pay the shipping anyways) recovery media from Toshiba. Can I use that on a new hard drive installed in the toshiba?
BTW ran the Windows Memory Diagnostics Tool and no problems were found with the memory. and i do not care about the old hard drive as I have MY files backed up. I just want to try to get this toshiba laptop back to being "like new".
Thanks,
Russell

ATIx1900 and driver issue

Similar Messages

Maybe you are looking for