ATML_5 dataplugin for DIADEM Help needed

Hello,
the data plugin from NI  for ATML_5   is not sufficient.
has anyone suggestions   to   customize  the dataplugin
does NI  provide the VB script for this ATML_5 Dataplugin  
regards
akshay

Hi akshay,
There are known shortcomings with the ATML DataPlugins when it comes to array data and looping.  It is intended to be sufficient for scalar results and setup conditions.  Would you please be more specific about the observed shortcomings?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

  • Applescript for QuickTime help needed.

    I have some mkv files that I would like to re-encapsulate as mov files.
    Through the GUI I would normally open the mkv in quicktime, then Save or Save As with self-contained option selected, and just hit enter. This would save the re-encapsulate the movie with no re-encoding to the same directory with the same filename, but now with the .mov extension. This works with no issues.
    Now, I want to be able to automate this process, but the only thing I can't figure out is how to tell the movie to *save self contained* with the *+same name in the same directory+*.
    Thanks in advance for any help you can offer!

    I don't know what the rest of your script is, but the following snippet will save the front document - no error checking (such as existing files or loaded state of the document) is done:
    <pre style="
    font-family: Monaco, 'Courier New', Courier, monospace;
    font-size: 10px;
    font-weight: normal;
    margin: 0px;
    padding: 5px;
    border: 1px solid #000000;
    width: 720px;
    color: #000000;
    background-color: #DAFFB6;
    overflow: auto;"
    title="this text can be pasted into the AppleScript Editor">
    tell application "QuickTime Player 7" to tell document 1
    set thePath to it's path & ".mov" -- just add a new extension to the existing file path
    save self contained it in thePath
    -- close
    end tell
    </pre>

  • Want to use Logic 8 Pro for Podcasting, help needed

    I have a few problems. I just switched over to Logic after using ProTools for 4 years so I'm a newbie. I'm about to start a podcast soon and I want to use Logic 8 Pro to do so. Is there a book that someone can recommend me for getting familiar with Logic?
    Here are the things I need to get done:
    I have a mixer and I need to know how to record the sounds playing through my computer to end up in Logic. I basically want to be able to capture the audio playing on my computer and have that be on the podcast. How do I do this?
    Secondly, I'm confused about what Input 1 and Input 2 are. What is the difference?
    I'd appreciate anyone who could IM me to help me further with Logic if I have a quick question or anything. My AIM screen name is DirtyVibes. Any help would be appreciated.
    Thank you,
    -RandomSkater

    Is there a book that someone can recommend me for getting familiar with Logic?
    Yes, the Getting Started manual, you can download it from Apple.
    I have a mixer and I need to know how to record the sounds playing through my
    computer to end up in Logic. I basically want to be able to capture the audio
    playing on my computer and have that be on the podcast. How do I do this?
    I'm not sure what you are asking here. If you want to record the whole output of your computer, I recommend using a virtual audio driver like Soundflower or Jack.
    Secondly, I'm confused about what Input 1 and Input 2 are. What is the difference?
    Input 1 is the input marked "1" on your audio interface (or the left channel on a stereo pair).
    Input 2 is the input marked "2".
    If your audio interface has more than 2 inputs, they will all show up, so you can record different inputs to different tracks if required.
    You might be better off using Garageband to record your podcasts, it's simpler and has dedicated podcast functions (like adding iTunes artwork and so on).

  • IOTech dataplugin for DIAdem in Windows 7

    Hello all....
    I am using IOTech 650U, eZ-Analyst for vibration data acquisition and DIAdem 2012 for post processing and analysis. I have used IOTech dataplugin to import .dsc files into DIAdem. All this is on Windows XP. We are going to move to Windows 7 64-bit. My question is will everything work out okay, i.e. -
    1. eZ-Analyst (I think is 32-bit software)
    2. DIAdem (I think is 32-bit software)
    3. Dataplugin
    I talked to NI rep and knew that eZ-Analyst and DIAdem 2012 should work fine without any performance issues including during data acquisition (mult-channel and high sampling frequency). My question is about the Dataplugin. Will that work fine in Windows7 64-bit? Has anyone checked that? My concern is also because these products are not much upgraded. Please reply if you know about it. Thank you.
    Solved!
    Go to Solution.

    Hello rajoria,
    I have no experience with eZ-Analyst, so I won't be able to make any statements about that product.
    With regards to DIAdem and any DataPlugins you may have, they will work perfectly with either Windows 7 32-bit or Windows 7 64-bit versions (as 32 bit applications).
    I'm not sure what you are referencing with this statement: "My concern is also because these products are not much upgraded."
    Here is the DIAdem life cycle policy document, it should address your OS support questions: DIAdem Life Cycle Policy
    DataPlugins always work with the current release of DIAdem.
    Best regards,
          Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • Flash and publishing for iOS (Help Needed)

    I currently own Adobe Create Suite 3 Design Premium.  I just recently heard that CS 5.5 can develop iOS Apps.  So I downloaded trial 2 days ago and thought I would see if I  could develop some apps and if things go well upgrade.
    Here is the issue I'm running into.  I created the CSR file with openssl since I don't own a mac, only a windows 7 based pc.  Apples developers program accepted my CSR and created the provisioning file for it.
    However, when I go to publish the for iOS it asks for a .p12 file.  I found online that is my CSR file.  However, it asks for a password.  I have no password for it.  It does not allow leaving the password field blank, and anything I put in it is incorrect.
    All I need help with is the .p12 file and getting past the password and I will be good to go.
    Anyone know a step by step guide or could walk me though this part.  Thank you and I greatly appreciate it.
    ~Chris

    the only thing is that i havent got a password set to my computer but i will have a look in to that thanks for the help

  • K8N -Thanks for the help - Need to be a little quieter

    AIM: to build an ass kicking video editing & music production PC
    Just wanted to say thanks to the peeps who contribute to this forum.  Although I have only just registered I have been coming here for the past month and have put together all the missing pieces of my first ever PC Build project.  My previous experience was to upgrade the odd part.  This forum has enabled me to make the equipment choices, tackle the engineering & build (including fitting the CPU fan which was my worst worry), update the bios & load the drivers & software in the correct order.  99% of the items have been sourced from eBay to save money and so far no DOA's.
    Still got some way to go, so any suggestions regarding my future upgrades would be welcome…..
    The Winfast graphics card is possibly the weakest link (borrowed from my outgoing PC) and I am looking for an ATI x800xt PE vivo.
    Looking to replace the HDD with two WD Raptors in Raid?
    Not sure If I will fit My Terratec Sound Card (the front plate has all the connections which is not good for the door on the front of my case) or to go the Audigy way?
    I have no idea how to overclock and not sure if I need to go this way for video editing, if yes would the dane-elec memory need to be upgraded?  How do I test this?
    I gather from previous posts that once all this kit is added  I may need to be upgrade the 400w PSU due to a shortage of amps?  I am a little reluctant as it is almost totally silent @ 14db. I like the look of the OCZ moonsomething?
    Finally, the case Tsunami Dream case is a little noisy. I just purchased some acoustic absorption mats to help. Has anyone had any luck changing the stock Tsunami 120mm fans to quieter ones? 
    Thanks Again

    Hi.  Happy you have found the forum helpful.
    I would buy  a good PSU first.  Otherwise you risk damaging  your new equiment.  Recommended makes are Enermax, Tagan, Hiper and OCZ with amps on the 12 rail at least in the mid twenties, but preferably around 30.
    For video cards, I have preferred nvidia-based cards in recent years because of their better driver support.  The 6800GT is a good choice.  The ultra version, IMHO, is not worth the added cost since you can ususally OC the GT ot ultra speeds.
    Raptors in RAID offer the best performace but suffer a big price premium over 7200 SATA drives.
    I would leave the Audio issue for last.  You just might like the on-board audio.
    Deciding whether to chage the case might be the very first thing to decide since it would be awfully inconvenient to install everything and then have to resinstall because of a case change.  I wish there was a way to get a totally silent case/fan combo, but I don't.  Maybe someone else will help you on this.
    Good luck.

  • Report for PO help needed (Urgent)

    Hi all,
    do anyone has code for a report which is used to create Purchase Order for materials which has purchase requisition.
    if anyone has the plz share it with me.
    bcoz it is urgently needed & it is required to be deliver today.
    Regards
    sanjeev

    Hi
    Take the data from <b>EBAN</b> table and try to display the same after fecthing from it.
    PO related tables are EKKO and EKPO, EKET,and EKBE.
    Reward points if useful
    Regards
    Anji

  • Username and password for airprint help needed

    hi
    i have set up airprint through the wifi and my iphone 3GS and ipad wifi are able to find the printers in the house but it says that a user name and password are required to connect to the printer but i do not believe that i have a password set to the printers. any help or ideas would be very useful
    many thanks

    the only thing is that i havent got a password set to my computer but i will have a look in to that thanks for the help

  • Waiting For Activation, help needed.

    Hi, I have bought a iPhone 3G 8GB from ebay. I have checked the IMEI number on "checkmend" and there are no reported problems. It is apparently on o2 but I want to unlock it for use on Vodafone. I have bought a o2 pay as you go sim card so that I can get it unlocked properly but when I insert it I get the message "Waiting for activation, this may take a while" but it never goes until I press "dismiss" then it just says "No Service".
    Under the carrier menu the only provider listed is Orange but under the "phone" menu in settings the last box does say o2!
    Can anyone help? I've tried googling, restoring the iphone, uninstalling and re-installing itunes. Does anyone know what the problem could be or better still anyone know of a solution?

    No way to tell really - I am always suspicious about 'the worlds largest,best, greatest ' etc checkers of anything. The four/five UK carriers all operate an IMEI block agreement between them and somehow I doubt that they would give up that information to a small company operating out of a Coach House in Gloucester
    That said, who knows - its practically impossible to tell where a phone came from - you are not the first to ask by far! The others didnt manage to find out either. Sorry I cannot be more helpful - the only online checker that Apple have is a warranty checker but that won;t even tell you the country - just how much warranty left on it. https://selfsolve.apple.com/GetWarranty.do

  • Ripping DVD's ready for iPod - Help Needed!!

    Hi All
    I have been using Handbrake to rip my DVD's and for some reason it has stopped working now..
    It goes through the process of encoding the files, all the settings are correct and I have noted the saved directory (even changed it a couple of times), and when it completes 100% there is no file to be found anywhere......
    I have posted a note on the handbrake forum but got no reply yet.
    Does anybody know what the problem may be?
    Also, does anybody know of an application that will rip DVD's so that they are iPod ready, or maybe into MPG/MPEG/AVi format.
    Many thanks
    Garry

    It goes through the process of encoding the files, all the settings are correct and I have noted the saved directory (even changed it a couple of times), and when it completes 100% there is no file to be found anywhere.
    How long do you wait? Once conversion has completed, the YourFileName.temp file must be rewritten to your desitination location. This can take some seconds, depending on the size of your movie. While we're at it, is the temporary file even being created when conversion begins?
    Also, does anybody know of an application that will rip DVD's so that they are iPod ready, or maybe into MPG/MPEG/AVi format.
    Ripping/extraction of DVDs can be done by a number of Mac compatible appliations. MacTheRipper (free) is probably one the most popular at the moment. Stripping and/or conversion, however, still requires an ancillary application like MPEG2 Works 4 Advanced ($$) or MPEG StreamClip (free). However, since your were less than specific as to type (stream file, elementary streams, VCD compatible, SVCD compatible, DVD compatible, etc.) of target file desired, I can only generalize. Conversion basically depends on the workflow you utilize. Both applications have some "intrinsic" capabilities but, for the most part, rely on QT, QT Tools, and/or QT components you have installed and available. In addition, both application allow output to what is basically the QT Pro "Movie to QuickTime" export option. This simply means that in addition to the specific formats you mentioned, you also have full access to all of the same target QT formats you could normally access directly from your QT Pro application. (I.e., you can go directly from a VOB file or file segment to any available QT compatible compression format based on QT Pro and installed QT Pro components.)
    REMINDER: These alternative compression formats are not iPod compatible.
    ADDED: Forty-TwoDVD-VXPlus ($$) will convert ripped/extracted DVD directly to iPod compatible formats.

  • Making click track for drums, help needed!

    Hello, newbie here.  I don't have that much experience with Logic and am using Logic 8.  Our band is making a backing track with midi bass panned one way and metronome click the other for our drummer.  My keyboardist managed to programme the metronome to change because we have lots of time signature changes mid song.  We've got all that working fine but our drummer is struggling to hear the click tone.  I could make an audio track with a cowbell sound but it would take ages and we've got the metronome doing what we want it to.  So...would ideally like the metronome click to be changed to a cowbell.  I've managed to change it from Klopfgeist to garage band drum kit but it only does a tinkly bell sound and then a whistle.  There doesn't seem to be an interface for it where I can change to a different drum percussion sound.  I've got Battery 3 and libraries.  I've tried loading this in the box below I/O but i then lose the metronome click altogether on playback.  Any ideas?  I've attached a couple of screenshots...
    Cheers

    you could also just not use the metronome at all. My default is an instrument track with hihats. If you load an intrument (like maybe ultra beat, or an EXS drumkit) then use the pencil tool to creat a region on a MIDI track, you could double-click the region and draw the notes on whatever beats, with whatever instruments. If you want to preview sounds, just hit your keyboard controller until you find what you like. The transport will show what note it is. Or the little keyboard on the left side in the editor. Edit the MIDI region to taste.
    Or... if you're not comfortable with the editing, just load an instrument, find the sounds you like, then record a couple of bars of how you want your click, then quantize to the smallest note value you have in your click. (usually 8th, sometimes 16th depending on the complexity of the click you've created.)

  • Error when converting videos for ipod--help needed please! : )

    it keeps saying "unknown error occured -3000"
    *** is that supposed to mean? : )
    i think i have the 5th generation ipod. its the larger gig video one that came out last octoberish.
    i just did the latest updates so i don't really know what else to do & i hate going to the genius bar at my mac store--its in a mall--blech!
    any help would be much appreciated--thanks!
    ibook   Mac OS X (10.3.9)  

    Where are the videos from? are they from a creditable source or from an illegal downloading site such as limewire. most of those videos are not in the correct video format to begin with so apple itunes will not recognize them and convert them. The best way to convert video is to rip your own dvds or home movies and put them on your computer then ipod. There is at least one way on each operating system (windows and mac) to rip your own dvds and then transfer them to itunes and finally put them on your ipod. A mac is the easiest of the two ways. If you have a mac, then you download a program off of the web called handbrake. Simply "google" >handbrake rip dvds< and its homepage should pop up or try <a class="jive-link-external-small" href="http://">http://handbrake.m0k.org). Handbrake allows you to copy and convert your dvds to ipod format. On a windows operating system the most effective way I have found to rip my dvds is quicktime pro($25-$35). You can buy it at quicktime's website. It basically does the same thing as handbrake. I, myself, have simply converted some videos, like sports shows and commercials, to ipod format using itunes and both the video and audio worked fine.
    If you have any ?'s just reply back
    I hope this helps!

  • INBUILT BLUETOOTH PROBLEM FOR 3250 HELP NEEDED

    HI I HAVE BROUGHT THIS MODEL NOKIA 3250 2 MONTHS BACK BUT NOW ALL OF A SUDDEN THE BLUEOOTH IS NOT WORKING I HAVE UPDATED THE PC SUIT SOFTWARE ALSO THE NEW VERSION BUT MY PHONE SAYS UNABLE TO PERFORM BLUETOOTH OPERATION CAN NAY ONE PROVIDE ME A SOLUTION FOR THIS

    Hello Jason, Thanks for your reply, when I click the speaker test thing on my RealTek Panel (http://img523.imageshack.us/img523/9499/oliver2007aug2800sr9.jpg) the rear speakers work fine, it's just whenever I'm listening to music or playing a game the audio doesn't come out the rear two speakers. Thanks!
    Oli'ver

  • For loop help needed

    How do I simplify this:
    _root.btn1._visible = false;
    _root.btn2._visible = false;
    _root.btn3._visible = false;
    with a for loop like this:
    for (i=1; i<=modtotal; i++) {

    Almost.
    _root["btn"+i]._visible=false;
    The sample given would look inside the object called btn for
    items named 1, 2, and 3 (asuming modtotal was equal to 3). The two
    things wrong with that are there isn't an object called btn and
    even if there was you cannot give objects names that are simply
    numbers.
    I say "objects" because this array access technique works
    with movieclips, buttons, variables, functions, etc. So it is one
    of the best tricks in your aresnal.

  • I need to upgrade my MacBook 13" white 2008 hard drive.  I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

    I need to upgrade my MacBook 13" white 2008 hard drive.  I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help

    I had a 640GB HDD in my Early 2008 Macbook and it was just too much it would always freeze up the computer a bit for only a few seconds but ya. Then I realized that it was the size of the HDD that was causing it since the Early 2008 Macbook models can only handle a MAX od 500GB while the Early 2008 Macbook Pros could have a MAX of 640GB (Lucked out there!) lol But ya the Early 2008 Mocbooks can only handle a MAX HDD size of 500GB and that's it!! lol

Maybe you are looking for