ATO model with both "Make" and "Buy" options

Hello,
Is it possible that an ATO Model has both "Make" and "Buy" type of options in it. If yes, how does the "Buy" item get fulfilled on the sales order. The buy item needs to ship together with the assembly, but as a separate part.
Or should such a scenario be achieved by having an ATO within a PTO and the buy item as a separate option in the PTO?
Thanks,
Raj

If an item is not made part of the assembly, then you have to choose a PTO.
Something like this
>
PTO
-------- PTO Option Class
---------------Buy1
---------------Buy2
--------ATO Model
--------------ATO option class
---------------------Option1
---------------------Option2
>
Sandeep Gandhi
Edit: For some reason, the BOM format is not rendered correctly in the above post. It appears that the ATO model is a child of PTO option class. That is not the case. The PTO Option Class and the ATO model are at the same level on the PTO bom.
Edited by: Sandeep Gandhi, Independent Consultant on May 1, 2012 9:14 AM

Similar Messages

I have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?

i have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?

thank you roger. i have attempted to connect my mbp now 3 times (all different ways with different cables purchased) but unfortunately no success. i understand that with me having an older mbp it can be a challenge. i have found this page http://www.wikihow.com/Connect-a-Macbook-to-a-TV but with my unsuccessful history, i have become skeptical. i will try your suggestion and let you know. thank you again.

I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

I'm having the same issue. After opening Audio Midi Setup in Utilities I noticed that the master volume slider of the Built-In Output is very low. I am not able to slide to get any more level out of the system.
Can you adjust the master volume on your system?

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Sending emails with both body and attachment to multiple recipients

I have a requirement to send email with body and attachment to multiple recipients.
Body of the email is a standard text. It is a proxy-to-mail scenario.
Here is what I've done: (I'm using PI 7.11)
One mapping from Source to Target structure (format of the attachment text file)
Second mapping from Target Structure to Mail Package format.
In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
"XIPAYLOAD" is the message protocol used.
The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
How to send an email with both content and text?
The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
Thanks for any input you can provide!
Edited by: crazylad on Jan 18, 2012 3:39 PM

Thank you for your response Mikael.
For the first question, I was able to find the solution in the following blog:
XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
(I just needed to search with the right set of key words )
The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

Cisco ISE with both internal and External RADIUS Server

Hi
I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
I will like to know if it is possible to configure it and how I can do it ?
Thanks in advance for your help
Regards
Blaise

Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

How do create a slide show with both video and photos in elements 12

how do create a slide show with both video and photos in elements 12

Hi Brian
You can batch process a set of prepared slides from Full Edit (see image) using:
File >> Process Multiple Files
In the PMF dialog you can choose filename, date, or description (caption)
Make sure you choose a separate destination folder to your source folder so as tot to permanently overwrite your originals.
Click image to view

Investigate book with both landscape and portrait pages

I've an old book where I sucessfully swapped landscape and portrait pages, but there are complications why I cannot use it as a model for my current project. Since I no longer remember how I accomplished this, I have to investigate how to build a book with both landscape and portrait pages.
I know about paragraph tags set to use a new page. Also a table on Reference page which lists Paragraph Tag Name, Right-Handed Master Page, Left-Handed Master Page, Range Indicator.
But this doesn't seem to be enough; something is not working.
Could you please point me toward resources which discuss how to do this?
Thank you kindly,
Theresa

I think there was a big discussion of this already either here on the forum or over at the Frameusers.com list (I forget which). Try googling -

How to spin an object with both x and z-rotation in M3G?

I want to spin an object with both x and z-rotation in M3G. I get a good result when I implement this in OpenGL, but the combined rotation doesn't get right when I try to do this in M3G. The x rotation and the z rotation looks like they should when I only use one of them. This is achieved by adding only spinAnimationTrack or rotationAnimationTrack. The problem is that the rotation gets messed up when I add both spinAnimationTrack and rotationAnimationTrack. What am I doing wrong? This is my code:
KeyframeSequence spinKeyframes =
new KeyframeSequence(3, 4, KeyframeSequence.SLERP);
spinKeyframes.setRepeatMode(KeyframeSequence.LOOP);
spinKeyframes.setDuration(4000);
spinKeyframes.setKeyframe(0, 0,
getRotationQuaternion(-50.0f, new float[]{1.0f, 0.0f, 0.0f}));
spinKeyframes.setKeyframe(1, 2000,
getRotationQuaternion(50.0f, new float[]{1.0f, 0.0f, 0.0f}));
spinKeyframes.setKeyframe(2, 4000,
getRotationQuaternion(-50.0f, new float[]{1.0f, 0.0f, 0.0f}));
AnimationTrack spinAnimationTrack =
new AnimationTrack(spinKeyframes,
AnimationTrack.ORIENTATION);
AnimationController animatorS = new AnimationController();
spinAnimationTrack.setController(animatorS);
animatorS.setSpeed(0.4f * speed, 0);
KeyframeSequence rotationKeyframes =
new KeyframeSequence(2, 4, KeyframeSequence.SLERP);
rotationKeyframes.setRepeatMode(KeyframeSequence.LOOP);
rotationKeyframes.setDuration(4000);
rotationKeyframes.setKeyframe(0, 0,
getRotationQuaternion(359.0f, new float[]{0.0f, 0.0f, 1.0f}));
rotationKeyframes.setKeyframe(1, 4000,
getRotationQuaternion(0.0f, new float[]{0.0f, 0.0f, 1.0f}));
AnimationTrack rotationAnimationTrack1 =
new AnimationTrack(rotationKeyframes,
AnimationTrack.ORIENTATION);
rotationAnimationTrack1.setController(animatorR1);
animatorR1.setSpeed(0.4f * speed, 0);
mesh1.addAnimationTrack(spinAnimationTrack);
mesh1.addAnimationTrack(rotationAnimationTrack1);

People often make this harder than it is. It's usually not necessary to using clipping paths or to make cuts confined to the areas of overlap to make objects appear to intertwine. Usually, you can simply cut where objects do not overlap. There are no masks, clipping paths, pathfinders, etc., involved in this knot:
Your specific situation may be somewhat complicated by the use of drop shadows, depending on the specific parameters.
JET

When I used download sets of photos, movies etc, (before I installed Lion) I used always get a "Download" gizmo which showed me the download happening with both speed and time left. Now with Lion, nothing shows on my screen. Can I fix this?

When I used download sets of photos, movies etc, (before I installed Lion) I used always get a "Download" gizmo which showed me the download happening with both speed and time left. Now with Lion, nothing shows on my screen. Can I fix this?

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Shooting with both 1080 and 720 settings on location?

Hello,
I'm new to video world. 7D has been my camera for photography and now I'm interested in using it to do some video as well. I've been reading and searching a lot online lately and was wondering if below is the best way to approach an on-location shoot:
1. Shoot with 'mainly 1920x1080 (24fps)' setting and 'switch to 1280x720 (60fps) setting' for the part which I know I will use the footage for 'slow motion'
2. After finish shooting, bring all footages to CS5 premiere and use '1920x1080 (24fps)' sequence/timeline to process footages shot with both 1080 and 720 settings.
3. Use the 'Interpret Footage' function to slow down the footage shot with 1280x720 setting and make it 24fps
Would this strategy work well or should I do the entire shoot with just '1280x720 (60fps)' setting and still use the '1920x1080 (24fps)' timeline in CS5?
Thank you for any help that you could provide as I'm eager to learn!

I think your question involves a couple of misconceptions:
assuming you're referring to Canon 7D, OnLocation does not support that camera to the best of my knowledge. For live monitoring and recording, OL works only with devices that output via Firewire (IEEE 1394), which I don't believe is true of the 7D.
while PPRO's Interpret Footage feature can serves the purpose of making a clip play in slow motion, that's not it's intent. Moreover, Premiere has better ways of achieving the goal, namely the Time Remapping feature and the Rate Stretch tool. Rather than attempting to explain those features here, I'll simply urge you to read the page in the help titled "Change speed and duration for one or more clips" (Home / Using Adobe Premiere Pro CS5 / Effects and transitions / Duration and speed)
As to your most basic question of what resolution and framerate to shoot, I'm not the best person to answer that, and the OnLocation forum is probably not the best place to get an answer. I'd suggest either the Premiere Pro forum here on Adobe.com or a more general forum such as dvinfo.net, creativecow.net, or dvxuser.com.

I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?

Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)

External hard drive use with both Mac and Windows

I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
(9844)

In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC?

In Creative Cloud, does the $9.99/month Individual Photography plan come with BOTH Lightroom and Photoshop CC? It is not very clear on the home page. It shows both and mentions both, but doesn't specifically say BOTH come with the monthly $9.99/month plan. Can somebody clarify?

Special Photography Plan
http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html

Form report with both edit and column link

hi experts,
How can we create form report with both edit and column link. Ie, the form should have both the Edit link and column link. When we click on the edit link(in page1) it should go for the page2 and the page2 should display the corresponding row fields which should be editable. but when i click the column link it should bring me to the next page but the corresponding values of the column should not be editable.
Regars,
KK

hi,
Here i have achieved this by making the column link and page navigation.

ATO model with both "Make" and "Buy" options

Similar Messages

Maybe you are looking for