Atom PSE erratum detected, BIOS microcode update recommended

This is the information about my Netbook:
Lenovo Ideapad S10
Memory = 995,8 MiB
Processor = Intel® Atom™ CPU N270 @ 1.60GHz × 2
Graphics = Intel® 945GME x86/MMX/SSE2
System base = Arch Linux 32-bit
This is my journalctl:
[root@arch julio]# journalctl
-- Logs begin at jue 2013-09-26 14:43:49 COT, end at mié 2013-10-02 15:36:17 COT. --
sep 26 14:43:49 arch systemd-journal[103]: Runtime journal is using 184.0K (max 49.7M, leaving 74.6M of free 497.7M, current l
sep 26 14:43:49 arch systemd-journal[103]: Runtime journal is using 188.0K (max 49.7M, leaving 74.6M of free 497.7M, current l
sep 26 14:43:49 arch kernel: Initializing cgroup subsys cpuset
sep 26 14:43:49 arch kernel: Initializing cgroup subsys cpu
sep 26 14:43:49 arch kernel: Initializing cgroup subsys cpuacct
sep 26 14:43:49 arch kernel: Linux version 3.11.1-2-ARCH (tobias@testing-i686) (gcc version 4.8.1 20130725 (prerelease) (GCC)
sep 26 14:43:49 arch kernel: Atom PSE erratum detected, BIOS microcode update recommended
sep 26 14:43:49 arch kernel: e820: BIOS-provided physical RAM map:
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x0000000000100000-0x000000003f6cffff] usable
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x000000003f6d0000-0x000000003f6e1fff] ACPI data
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x000000003f6e2000-0x000000003f6e2fff] ACPI NVS
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x000000003f6e3000-0x000000003fffffff] reserved
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
sep 26 14:43:49 arch kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
sep 26 14:43:49 arch kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
sep 26 14:43:49 arch kernel: SMBIOS 2.5 present.
sep 26 14:43:49 arch kernel: DMI: LENOVO 433336U /Kuril , BIOS 14C
sep 26 14:43:49 arch kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
sep 26 14:43:49 arch kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
sep 26 14:43:49 arch kernel: e820: last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
sep 26 14:43:49 arch kernel: MTRR default type: uncachable
lines 1-31
I did what you recommended and this product is the report
https://wiki.archlinux.org/index.php/Microcode
Any idea?

progandy wrote:You'll have to update the bios or use the early microcode update as described here: https://www.kernel.org/doc/Documentatio … rocode.txt
Interesting... perhaps this is handled some how by mkinitcpio? I didn't see anything obvious in the hooks section.
progandy wrote:Edit: You can download the microcode data here: https://downloadcenter.intel.com/Search … crocode%22
This gives the same file that [extra]/intel-ucode uses, but neither the source nor the package provides "GenuineIntel.bin" mentioned in the document.
EDIT: If the info contained in the blog post you referenced is indeed accurate, I fail to see what value the intel-ucore packages provides at all. In other words, it loads the updates after the kernel has already disabled the features the updates are fixing. Seems as though either:
1) The package provides superfluous files.
2) It needs to generate a modified initrc image as described in the early-microcode.txt file you referenced.
3) We are wrong and the package does indeed provide a solution.
EDIT2: http://lists.debian.org/debian-user/201 … 00395.html
Last edited by graysky (2013-10-03 18:27:03)

Similar Messages

BIOS Microcode Update?

When I run dmesg after booting up my Dell Mini 9 (With an Atom processor) I get the following:
Atom PSE erratum detected, BIOS microcode update recommended
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Any idea on how to update my BIOS microcode?

@SK - nothing will happen since your CPU's microcode from the latest version hasn't changed. I did the experiment on my Atom 330 based machine.
thestinger wrote:Ah, it's possible that's the newest microcode for that CPU, I wouldn't worry about it .
You're right I think...
On my X3360:
microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
microcode: CPU0 updated to revision 0x70a, date = 2010-09-29
microcode: CPU1 updated to revision 0x70a, date = 2010-09-29
microcode: CPU2 updated to revision 0x70a, date = 2010-09-29
microcode: CPU3 updated to revision 0x70a, date = 2010-09-29
On my E5200:
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
On my Atom 330:
microcode: CPU0 sig=0x106c2, pf=0x8, revision=0x20d
microcode: CPU1 sig=0x106c2, pf=0x8, revision=0x20d
microcode: CPU2 sig=0x106c2, pf=0x8, revision=0x20d
microcode: CPU3 sig=0x106c2, pf=0x8, revision=0x20d
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
microcode: CPU0 updated to revision 0x219, date = 2009-04-10
microcode: CPU1 updated to revision 0x219, date = 2009-04-10
microcode: CPU2 updated to revision 0x219, date = 2009-04-10
microcode: CPU3 updated to revision 0x219, date = 2009-04-10
Last edited by graysky (2011-02-27 12:16:29)

How can i fix "invalid processor microcode update" i have a compaq dc7100 cmt

My m/c is a HP Compaq dc7100 CMT(DX438AV).
I've replaced the 2.8 processor with a P4 HT 3.4ghz 1M/800 SL7PY , during start-up it gives the message "missing or invalid processor microcode update"
My motherboard is HP 0968h . My Bios is... Version : 786C1 v01.05
I looked at specs for the board and i think it supports this chip, can anyone help fix this problem
Thanks..
This question was solved.
View Solution.

Hi:
Now that you installed the latest microcode update, may I recommend you install the Pentium 4 650 3.4 GHz?
That processor has double the L2 cache as the one you installed, and you can run a 64 bit operating system on it.
If you have the CMT, you have a pretty wide assortment of video cards you can install so you can run all of the features of Windows 7. The onboard GMA 900 video won't run Aero. Just keep within the power supply limit of 345W
I have W7 x64 on my dc7100 CMT and an ASUS nVidia 8400GS 512 MB fanless video card in mine, and everything works great. Recommended P/S is 300W for the card so I was fine.
The P4 650 is pretty reasonable on eBay. That is where I got mine.
http://computers.shop.ebay.com/CPUs-/164/i.html?CPU%2520Type=Pentium%25204&rt=nc&LH_BIN=1&_nkw=650&_...
Paul

Solaris 10 AMD Athlon Opteron BIOS microcode patch

I've recently installed Solaris 10 on AMD Opteron machine, AMD64
On boot, I receive a message "BIOS microcode patch not found...erratum 109" or something to that effect.
this is followed by a bunch of "not enough space" comments.
I've tried to find such a patch without success. Clearly, this points out my lack of knowledge. Perhaps someone can provide advice? AMD said "call Sun"

I went back and did a reinstall of OS. I then downloaded and installed all the patches associated with the machine W1100Z. This has made this operational but issues remain. I decided to download the latest supplement.iso (2.5) and install the newer BIOS. The supplement.iso size is 427.89 MB. Unfortunately, at 427.11 MB I receive an error "not enough memory in the folder". I get the same result regardless of the target directory. I do suspect the installing the new boot image will work but the problem of how to get in on the machine remains.
I apologize for the delayed response but I only have so much time. I have considered the purchase of a new machine would be a good choice, with OS already installed, but this one is autographed by James Goslin. An operating machine certainly would be a great SUN advertisement in my office. Plus, the tanking markets have significantly reduced my upgrade capability.
You are probably correct though. Finding the disks may be a problem especially cdrom.
cd c:\cdrom
ls -l
doesn't list anything

How to fix "1801-Microcode Update Error" in HP Compaq dc7700p Convertible Minitower

Hello,
i've been reading and reading this post for a several times and i'm not sure will this work on my PC so i must ask, how to fix "1801-Microcode Update Error" in HP Compaq dc7700p Convertible Minitower i've upgraded it with E7200 instead of the original E6300
here's Product Number: p/n RN120ET#UUZ
I'm able to boot up and start windows i don't know is it working normaly or not, i'm just annoyed with the boot message:
Please HELP and Thank You in advance !!!
This question was solved.
View Solution.

Hi:
You will need to update the BIOS to its latest version to get rid of the microcode error, and the processor will only run at half the FSB speed because the BIOS update was not written to make the E7xxx processors work correctly.
You will need to run this software each time you get into windows and change the multiplier to the max.
Or you can run that batch file listed on the below webpage for it to run automatically.
http://crystalmark.info/software/CrystalCPUID/index-e.html
If I were you, I would just install a Conroe E6700 and have a problem-free upgrade.
You will need to use the DOS based flash because I don't think there is a BIOS update written for W7.

02f0:cpu id: A7 no microcode update loaded for alternate processor

Dear Sir.. I am facing problem in my L420 model laptop.. that is the above mentioned 02f0:cpu id: A7 no microcode update loaded for alternate processor error code appearing.. the problem is i cant access any bootable device if i try to put new bios its not supporting os cd and any other bootable devices.. so kindly guide me to solve the issues.. how i can put new bios version or tell me the solution for login bios?

is your CPU the original one shipped with your ThinkPad?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Xw6200 1801 microcode update error

Hi I have recently upgraded my xw6200 workstation cpu from 2 x intel xeon 2.8 ghz to 2 x inel xeon 3.6 ghz. the problem is when i but up my pc i get a error "1801 microcode update error" and give me the option to boot by pressing f1 and the it boots up no problem apart from the fans are a lot noisier. is there a way to solve this error every time i boot up. its not a massive problem as windows runs fine after i press F1 but any help would be appreciated thanks.

Unfortunately, the latest version of the installed BIOS version is as good as it gets.
The BIOS family 786B7, which your BIOS is a member of, was last updated in 2006.
Unless a microcode update can be found through Windows update or at Intel for the installed operating system, this may be an issue that I am unable to help you resolve.
Normally a BIOS update is the answer, but no more exist.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Can not access BIOS after update BIOS

Can not access BIOS after update X220 BIOS to version 1.19
Type: 4290-R32
BIOS: 1.19
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
Ask google and try anyway but not work
- Press ThinkVantage, Press F1, Press Fn+F1
- Power off, unplug AC, unplug battery, wait 15 miniute, try all again
- Try to update BIOS again

That is really weird.
When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

Here's a link to the QuickTime for Leopard 7.7 installer:
http://support.apple.com/kb/DL761

How to fix "1801-Microcode Update Error" in HP Compaq dc7800 Convertible Minitower

I have Intel Core 2 Duo @ 2.93 Ghz. My operating system is Windows 7 Ultimate x64.
This question was solved.
View Solution.

Hi:
The E7500 processor is not supported in the dc7800, which is why you are getting the microcode error.
Below is the list of supported processors.
Intel Core 2 Duo Processors:
Intel Core 2 Duo E4500 Processor (2.20-GHz, 2 MB L2 cache, 800-MHz FSB)
Intel Core 2 Duo E4600 Processor (2.40-GHz, 2 MB L2 cache, 800-MHz FSB)
Intel Core 2 Duo E4700 Processor (2.6-GHz, 2 MB L2 cache, 800-MHz FSB)
Intel Core 2 Duo E6550 Processor (2.33-GHz, 4 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E6750 Processor (2.66-GHz, 4 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E6850 Processor (3.0-GHz, 4 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E7200 Processor (2.53 GHz, 3 MB L2 cache, 1066 MHz FSB)
Intel Core 2 Duo E7300 Processor (2.66 GHz, 3MB L2 cache, 1066 MHz FSB)
Intel Core 2 Duo E8200 Processor (2.66-GHz, 6 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E8300 Processor (2.83-GHz, 6 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E8400 Processor (3.00-GHz, 6 MB L2 cache, 1333-MHz FSB)
Intel Core 2 Duo E8500 Processor (3.16-GHz, 6 MB L2 cache, 1333-MHz FSB)
Inter Core 2 Duo E8600 Processor (3.33-GHz, 6 MB L2 Cache, 1333-MHz FSB)
As a long shot, you can try installing the latest microcode update. You need to use a bootable USB flash drive with dos files so you can run the flashbin.exe command after you copy the microcode update files to your bootable flash drive.
I can't get to the dc7800 support site. When you can, select the microcode update download from 2010 v1.14
If you are unfamiliar with how to make a flash drive bootable, here is a good "how to" article with the files you need.
http://www.techpowerup.com/forums/showthread.php?t=47812
Paul

PSE Not showing camera raw update 8.8

My PSE13 is saying that camera raw is up to date at 8.7 but it will still not read my NEF Files.. I saw camera raw 8.8 is available but my PSE is not showing an update available so how do I manually update my Camera Raw?

Perhaps that is your experience, MBP, at a particular point in time and/or on a particular platform for version of PSE13, but for me on Windows 7 and Windows 8, with PSE 13.1 & ACR 8.7.1 installed, there still is no update found when checking from Help / Updates in the PSE 13 Editor. I have also downloaded and installed the Camera RAW 8.8 installer from the Adobe HelpX page, and that installer installs ACR 8.8 for PS-CS6 and PS-CC but no PSE13--I have all three on my system. I can manually copy the plug-in from the PS folder to the PSE folder but that's not something the updater is doing on its own.
For someone who has some computer savvy, and is running Windows, at least, you can download the ACR 8.8 installer EXE, rename it to have a .zip extension, open it with 7zip (not Windows native compressed folder handling, or WinRAR) and unzip the contents to somewhere, then look for the Camera Raw.8bi file, and copy that over the top of the PSE13 file of the same name. There are two Camera Raw.8bi files. The one under $SHELL[70] is the same size as in my PS-CC so I assume that is the 64-bit one. There is another one under $MUSIC that is slightly smaller so maybe that is the 32-bit one but the folder structure also says CC so I'm not sure.
The installer is here:
Camera Raw plug-in installer
Besides the .8bi plug-in there are also new camera profiles. Those can be more easily installed by installing the DNG Converter 8.8 available from the Adobe Updates page: http://www.adobe.com/downloads/updates/

[SOLVED] AMD Microcode update failed (on Xen host)

I have an Arch system running as a VM Host based on Xen 4.4.1
It is yet unclear to me why the VMHost (Dom0) cannot update the CPU microcode of the AMD Opteron 3365.
The following errors appear.
[ 9.664531] microcode: CPU0: patch_level=0x0600081c
[ 9.664548] microcode: CPU1: patch_level=0x0600081c
[ 9.664566] microcode: CPU2: patch_level=0x0600081c
[ 9.664580] microcode: CPU3: patch_level=0x0600081c
[ 9.664593] microcode: CPU4: patch_level=0x0600081c
[ 9.664607] microcode: CPU5: patch_level=0x0600081c
[ 9.664624] microcode: CPU6: patch_level=0x0600081c
[ 9.664639] microcode: CPU7: patch_level=0x0600081c
[ 9.664723] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 18.344286] microcode: CPU0: update failed for patch_level=0x06000832
[ 18.345579] microcode: CPU1: update failed for patch_level=0x06000832
[ 18.346899] microcode: CPU2: update failed for patch_level=0x06000832
[ 18.348202] microcode: CPU3: update failed for patch_level=0x06000832
[ 18.349488] microcode: CPU4: update failed for patch_level=0x06000832
[ 18.350776] microcode: CPU5: update failed for patch_level=0x06000832
[ 18.352063] microcode: CPU6: update failed for patch_level=0x06000832
[ 18.353352] microcode: CPU7: update failed for patch_level=0x06000832
I am aware that Xen can do some early loading of microcodes, since I have found clues in the Xen git logs.
But I guess Xen does not update the microcode, since the OS in Dom0 believes it is necessary to update the microcode.
Does anybody have a clue why updating the CPU microcode from within Dom0 fails?
Last edited by ArthurBorsboom (2015-01-10 12:45:29)

I have solved the issue by using the Xen early microcode loading with the following changes.
Copy the correct microcode binary to the boot folder.
sudo cp /lib/firmware/amd-ucode/microcode_amd_fam15h.bin /boot
Edit the Xen command line in /etc/xen/grub.conf from
XEN_HYPERVISOR_CMDLINE="dom0_mem=1024M,max:1024M xsave=1"
to
XEN_HYPERVISOR_CMDLINE="dom0_mem=1024M,max:1024M xsave=1 ucode=-1"
Hardcode the /etc/grub.d/09_xen configuration file to load the binary.
From
menuentry "Xen ${XEN_VERSION} / Arch Linux ${_KERNEL_PKG_} kernel" ${CLASS} {
$(save_default_entry)
if [ x\$feature_all_video_module = xy ]; then
insmod all_video
fi
set gfxpayload=keep
insmod ${BOOT_PART_FS}
if [ x\$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root ${BOOT_PART_HINTS_STRING} ${BOOT_PART_FS_UUID}
else
search --no-floppy --fs-uuid --set=root ${BOOT_PART_FS_UUID}
fi
echo '$(printf "Loading Xen %s ..." ${XEN_VERSION})'
multiboot ${REAL_DIR}/${XEN_BASENAME} ${REAL_DIR}/${XEN_BASENAME} ${XEN_HYPERVISOR_CMDLINE}
echo 'Loading Arch Linux ${_KERNEL_PKG_} kernel ...'
module ${REAL_DIR}/${_KERNEL_FILE_} ${REAL_DIR}/${_KERNEL_FILE_} root=${GRUB_LINUX_ROOT_DEVICE} rw ${GRUB_LINUX_PARAMS}
echo 'Loading Arch Linux ${_KERNEL_PKG_} kernel initramfs ...'
module ${REAL_DIR}/${_INITRAMFS_}
To
menuentry "Xen ${XEN_VERSION} / Arch Linux ${_KERNEL_PKG_} kernel" ${CLASS} {
$(save_default_entry)
if [ x\$feature_all_video_module = xy ]; then
insmod all_video
fi
set gfxpayload=keep
insmod ${BOOT_PART_FS}
if [ x\$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root ${BOOT_PART_HINTS_STRING} ${BOOT_PART_FS_UUID}
else
search --no-floppy --fs-uuid --set=root ${BOOT_PART_FS_UUID}
fi
echo '$(printf "Loading Xen %s ..." ${XEN_VERSION})'
multiboot ${REAL_DIR}/${XEN_BASENAME} ${REAL_DIR}/${XEN_BASENAME} ${XEN_HYPERVISOR_CMDLINE}
echo 'Loading Arch Linux ${_KERNEL_PKG_} kernel ...'
module ${REAL_DIR}/${_KERNEL_FILE_} ${REAL_DIR}/${_KERNEL_FILE_} root=${GRUB_LINUX_ROOT_DEVICE} rw ${GRUB_LINUX_PARAMS}
echo 'Loading Arch Linux ${_KERNEL_PKG_} kernel initramfs ...'
module ${REAL_DIR}/${_INITRAMFS_}
echo 'Loading AMD Microcode'
module ${REAL_DIR}/microcode_amd_fam15h.bin
Rebuild the grub configuration file
sudo grub-mkconfig -o /boot/grub/grub.cfg
And reboot
Check with the following command that Xen is running
dmesg | grep xen
Check with the following command that the microcode has the correct version
[arthur@orion1695 ~]$ dmesg | grep microcode
[ 9.379631] microcode: CPU0: patch_level=0x06000832
[ 9.379645] microcode: CPU1: patch_level=0x06000832
[ 9.379662] microcode: CPU2: patch_level=0x06000832
[ 9.379676] microcode: CPU3: patch_level=0x06000832
[ 9.379692] microcode: CPU4: patch_level=0x06000832
[ 9.379710] microcode: CPU5: patch_level=0x06000832
[ 9.379724] microcode: CPU6: patch_level=0x06000832
[ 9.379738] microcode: CPU7: patch_level=0x06000832
[ 9.379823] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[arthur@orion1695 ~]$
And as you see in this example, there is no attempt to update the microcode anymore, since it is already up-to-date.
I hope this helps other people facing this issue.

Iphone is not detecting network after updating, i m not able to configure it

my iphone is not detecting network after updating, i m not able to configure it

To answer your question there, are you unable to connect to cellular internet (using a SIM or WiFi?

Microcode Update Error in HP DC7100 CMT

Hi, I have a hp dc7100 cmt and I have already read other post regarding Microcode Error, but the file that I need ---> http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=402165&swItem=ir_63388_1&lang=en&cc=uk <--- isn't available where I can find it?
This question was solved.
View Solution.

Hi:
Here is the link to the file you need...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=402164&swItemId=PSG_I23754_109014&swEnvOi...
Reminder that this microcode update will only work by using a floppy disk.
The file will ask you to insert a floppy disk in a FDD and it will create a bootable floppy disk and put the microcode update files on the disk.
Then you boot from the FDD and follow the on screen instructions to update the microcode.

Microcode update

hi all help needed please,
have hp small form factor dc 7600 and on start up i have the ollowing message
1801 microcode update error missing or invalid processor microcode update
any ideas?

DANIEL442
If you could please post your product number for your computer. I am linking a document below that will show you how to find your product number. As well if you could indicate which operating system you want change to whether or not it is 32-bit or 64-bit as with this and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00033108
Please feel free to re-post once you have the required information.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Atom PSE erratum detected, BIOS microcode update recommended

Similar Messages

Maybe you are looking for