"atos needs to take control of another process for debugging to continue. Type your password to allow this."
I get this always "atos needs to take control of another process for debugging to continue. Type your password to allow this."
Please how can i stop this from coming on my Macbook?
If you're running a database application called "Bento," you'll have to stop using it. It's incompatible with Yosemite and has been discontinued by the developer. Other applications that have been reported to cause this alert are "Sketchup," "FontExplorer," and "Juniper Network Connect." Refer to the developer for support.
Similar Messages
-
"atos needs to take control of another process for debugging to continue" ??
Hi, I just updated to Yosemite, I am using SketchUp Pro and got a scary pop up from "Atos" saying : atos needs to take control of another process for
debugging to continue. Type your password to allow this". What do I need to do. I need to use Sketchup. I clicked continue and Sketchup crashed.
I thought It was a virus.
Please someone tell me what do I need to do? to fix? Thank you
thank youIt's a known issue with that application. Only Google can do anything about it.
-
Help needed to take control back from sqlplus for expired password
Hi,
I am executing the following line for Oracle 11g in Windows from my application
sqlplus -L "aaaa"/"aaaa" @connectonly.sql >>"D:\tempDBlogs\connectonly.log"
connectonly.sql file contains the following code:
whenever sqlerror exit 1
whenever oserror exit 2
exit
This piece of code executes fine for both correct & incorrect userid & password and gives proper messages. Now the problem is when password of the user in DB gets expired. The controls waits for user input. But my problem is I am runinng this code from an application which waits for sqlplus.exe to end, as it can't proceed without validation. But sqlplus runs as background process and the command prompt never comes to user. Moreover I dont want to give the user the option to change DB password from my application front end.
So I need to find a way so that if password is expired sqlplus will return the control and will not wait for user input. Or atleast my application gets to know that the password is expired so that it can kill sqlplus process.
Can somebody help me in this.interesting question. I tried something on unix and this seems to work. I simply piped a line through this which leads to an error with the expire-prompt and doesnt do any harm when there is no such prompt:
oracle@oracle:~$ echo "" | sqlplus brost/secret @test.sql
SQL*Plus: Release 10.2.0.1.0 - Production on Tue May 19 10:18:36 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-28001: the password has expired
Changing password for brost
New password:
Retype new password:
ERROR:
ORA-00988: missing or invalid password(s)
Password unchangedSomething similar should be possible on windows. Of course, the real solution would be flag for sqlplus that makes it absolutely non-interactive. -
I spilled some red wine on my keyboard and i cannot connect to the internet any more. it says on the internet icon: Wi-fi: no harware installes. so i guess i need to get a new wifi card for my mac air. do i have to buy this from a apple store? i live fare away from an apple store. Also, I do have a macbook with software system:
System Version: Mac OS X 10.6.8 (10K549). can I take out the wifi card from that mack and use that one for my mac air?Welcome to Apple Support Communities
Consider yourself lucky that your MacBook is still working. Now, turn it off. Wine may have damaged other parts of your computer.
Then, take the MacBook to an Apple Store or reseller. It will be a very expensive repair, as it's not covered by warranty and the logic board has to be replaced. In some cases, it may be better to get a new MacBook.
If you can't take it to an Apple Store, contact with Apple > http://support.apple.com/kb/HE57 -
Need help startng websphere server in eclipse for debugging porpose
I am using Eclipse Sdk Version: 3.1.2
IBM websphere 6.0
JDK 1.4
I set debug value to "true" in my application.xml
I have a .ear file of my application deployed on the websphere appserver. Currently I can test my application in nobebug mode.
values of environment variables are -
JAVA_HOME - C:\DEV\IBMJDK142; C:\Program Files\Java\jre1.6.0_03
PATH - C:\DEV\IBMJDK142\bin; C:\Program Files\IBM\WebSphere MQ\Java\lib;C:\DEV\IBMJDK142\bin;%SystemRoot%\system32;%SystemRoot%;
I want to test the application in debug mode.
I am using default server on websphere, which is server1.
In Admin-console of webshere I went to
server-->Application server-->choose server1-->Debugging Service ---->checked the checkbox "Enable service at server startup"
Here value of my JVM debug port is 7777.
next In Eclipse env I chose Run---->Debug....--->Remote Java Application ----> created a new application with the name of my application and set the connection properties to -
Host - localhost
port-7777
Eclipse----> Windows----->Preferences---->Server----->Installed Runtime---->Add---->selected values such as -
JRE - default JRE(JDK 1.4)
IBM Websphere Installation Directory - C:/DEV/WebSphere/AppServer
saved it.
Now in debug perspective, I created a new server with selection/values such as -
IBM--->IBM Websphere v6---->
port - 9081
server profile directory - C:/DEV/WebSphere/AppServer/profiles/default
cell - GCWSNTRANode01Cell
node - GCWSNTRANode01
server - server1
Next---->Added the project to configured project ----->FINISH
Closed Eclipse to save env settings.
Started the default server (server1)
opened eclipse - desired project--->debug perspective ---->choose server--->Right Click----Start/Debug
mesg "Starting ServerI BM Websphere 6 - IBM Websphere 6 failed to start"
can some one please tell me what I am missing here.Need help startng websphere server in eclipse for debugging porpose
can some one please tell me what I am missing here. Well for one, you're trying to debug a dolphin
Edited by: redfalconf35 on Jun 19, 2008 4:50 PM -
I need to take music off my Iphone to download new oper. system. how do I do this?
I need to take music off my I Phone to download new operating system. How do I do this?
Hey smllygoblue,
Thanks for the question. The following resource may provide a solution:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Make sure your device has enough available space to install the update. Use iTunes to update if you don't have enough space, or remove content from your device. Tap Settings > General > Usage to see how much space your content uses.
Thanks,
Matt M. -
Need a document with steps and process for IBCM implementation
Dear Frds,
I need a documents which contains steps and process to implement IBCM for SCCM2012.
I have following things in Intranet:
1) SCCM2012 in intranet and clients are reporting at this movement.
2) Intranet based Domain PKI infra.
Thanks.....
RajaI strongly suggest taking a look at Direct Access. Most people looking at IBCM end up going with Direct Access since it requires fewer steps/less infrastructure and yet provides far more value.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful". -
Process for Debugging BW Start Routines
I need a detailed process for how to debug the ABAP code of a start routine, particuarly when one ODS is being loaded into another. I know that there is a way to do this with the ABAP debugger but cannot figure it out.
Are there any documents out there that can assist me? I did a search, but all of the examples were too specific to be useful for just general debugging.
Thanks!Hi,
It is not possible to debug in start routine through conventional way upto 3.5 version.
You need to put an endless loop in the start routine.
The program will keep running in the endless loop.
It can achieved by the following code.
data: true,
false.
true = 'X'.
do.
if true = false.
exit.
endif.
enddo.
And in transaction SM50, the endless loop program will visible.
select the program by clicking the check box on the left hand side,
then on the menu,
Program/Mode -> Program -> Debugging.
I hope this helps.
Thanks. -
What can I do to fix the phone and get the keys I, K, N to work? Do I have to take it back?
Hi necjd123,
If your iPhone's touchscreen is not responding, then I'd like you to please follow the troubleshooting steps below.
Make sure your hands are clean and dry, then try these steps:
If you have a case or screen protector on your device, try removing it.
Clean the screen with a soft, slightly damp, lint-free cloth.
Unplug your device.
Restart your device. If you can't restart, reset your device.
If your touchscreen still doesn't respond like it should, contact Apple Support or take your device to an Apple Retail Store or Apple Authorized Service Provider.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Take care,
Alex H. -
Set up process for iphone on continuous loop
I have an iPhone 4 and just updated to the latest operating software.
When I plug my iPhone in it goes through the set up screen asking me to carry out the series of steps - select language country etc and then I get to the "Set up Iphone" with options to:
- Set up as new iphone
- Restore from ICLoud back up
- Restore from Itunes back up
I select the third option and then when connected to itunes select to "Restore backup". The process kicks off and ofr an instant I see all the apps on the screen I have before switching to a "Restore in Progress" screen. This continues until complete and then reboots at which time it goes to the initial set up screen again and then it starts all over again. It is getting incredibly frustrating.
Is there anything that I am doing wrong in the set up? Am I selecting the correct option?
Any help would be appreciated!
Thank you
BATry setting it up as a new phone and see if it completes the setup process.
If it does not, there is very likely a hardware issue with your phone and you need to bring it to an Apple store for evaluation.
~Lyssa -
When I try to delete this message the website I am trying to reach closes and I revert back to my home page
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes -
I have personal hotspot on my phone, but it won't connect to my laptop, it will say IPhone on my laptop and I will put my password in but it won't connect could you help me or tell me what I should do with it ?
For starters you should probably tell us what if any error message you receive when you try and connect. What happens when you try? Have you tried changing the password?
-
I installed the beta ios6.. it says it is expired and won't let me in my ipad...
I try restore and it says it says it can't download the software.....Now you will know not to install beta iOS versions, unless you are a developer. Hopefully, you didn't jailbreak the iPad, as Apple may not help you.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
when connect my ipad a my rmbp 15" appears this message "iTunes could not connect to this iPhone. This device is no longer connected." and ipad is connected and disconnected all the time. but when connect the Ipad in my rmbp 13" not have a problem.
Please I need help. i hope not to have another disappointment with apple product.iTunes could not connect to this iPhone. This device is no longer connected.
iPad 2 7.1.2
iTunes 11.3 (54)
iMac 27 in 10.9.4
Follow these steps to resolve your issue for iPads
Troubleshooting time is about 30 minutes - 1 hour
Step 1
Unplug the usb 2.0 cord from the 27 in iMac and iPad 2 64 GB (or what ever version you have) Power down the iPad
Step 2
Select your HD (Hard Drive) ( I did this form my desk top)
Next select the applications folder, Next right click the iTunes icon and select show package contents, select Contents.
1. Next select info.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
2. Next select pkginfo, right click and select move to trash. (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
3. Next Select version.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
4. Remove "iTunes" from your dock
5. From the Finder, choose Go > Go to folder.
6. Type the following and then press Return: /var/db/lockdown
7. Choose View > as Icons.
8. The Finder window should display one or more files with long alphanumeric file names.
9. In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted. Note: Do not delete the Lockdown folder itself.
Delete only the files contained inside the Lockdown folder.
Step 3
Follow the below steps to troubleshoot the issue.
1. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/LaunchDaemons
2. Click Go.
3. Locate the file "com.apple.usbmuxd.plist~orig" and drag it to the Trash. (Do not move the similarly named "com.apple.usbmuxd.plist" file to the Trash.) If you DO NOT HAVE file "com.apple.usbmuxd.plist~orig" I DELETED THE FOLLOWING (com.apple.usb.plist)
4. In the Finder, locate iTunes in the Applications folder and drag it to the Trash. (This will not remove any of your iTunes media or your iTunes library.) You may be presented with the following message “iTunes” can’t be modified or deleted because it’s required by OS X.) Do not worry click ok and proceed troubleshooting
5. Choose Go > Go to Folder. Enter the following location into the text field that appears: /System/Library/Extensions
6. Click Go.
7. Locate the file "AppleMobileDevice.kext" and drag it to the Trash.
8. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/PrivateFrameworks
9. Click Go.
10. Locate the folder "MobileDevice.framework" and drag it to the Trash.
11. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/LaunchDaemons
12. Click Go.
Step 4
Goto your hard drive in the finder
1. Goto Library
2. Goto Launch Daemons
3. Throw this in the trash: com.ghughes.wifisync.root.plist and anything with the words iTunes
4. Goto Library
5. Goto Application Support
6. Throw this in the trash: Wi-Fi Sync (it's an entire folder) and anything with iTunes
Step 5
(Before restart book mark the link command and D). Restart the Mac.
Download iTunes and reinstall it. After the install, connect the 2.0 usb device to the iPad 2 while the unit is still powered off, next connect the 2.0 usb cord to iTunes, power the iPad on. iTunes will read the device and ask to trust device, select continue. Backup the iPad device to the 27 in iMac.
Step 6
Please Rate if it helped you! After that have a cold hard drink and enjoy the day -
Yosemite: What the *** is Atos and why does it want to take control?
"Atos wants to take control.." dialogue box comes up on every boot-up. New phenomenon since upgrading to Yosemite. Nothing can be done until I fulfill this request by putting in my AppleID password.
-What is Atos?
-Why is this happening?
-Is this an Apple thing or is there a ghost in the machine?
-Why didn't Apple do a compatibility test for user/s before allowing the upgrade?
-How do I get rid of this ridiculous hassle?
Would be nice to have an official Apple response. Mostly I've seen other folks who want me to send diagnostics, which sounds sketchy.
PS: I don't tacitly use Bento, never heard of it until I had this problem and looked over the forums - to no avail, don't use Filemaker. I do have Office 2011 installed.
Help, this *****.
MacMini (2013)It's likely that one of your login items is causing the problem. Select the Login Items tab in the Users & Groups pane of System Preferences. Delete any items that you don't recognize. If you're not sure which ones to delete, double-click each to test it.
Maybe you are looking for
-
Artist's names are displayed incorrectly and some artists don't even show up at all on my iPhone 4S.
I was just doing some housekeeping in my iTunes library and I noticed that some of the artists were not showing up on my iPhone 4S. Here's an example. I like Wu-Tang. Wu-Tang has a million songs that feature a million different artists, so I just wan
-
Issue while installing oracle in suse linux 11
Hi all, When i try to execute runinstaller from root its not allowing me to run. I am trying to install oracle 10g. ./runInstaller -ignoreSysPrereqs Starting Oracle Universal Installer... Checking installer requirements... Checking operating system v
-
Stream video with Adobe Flash Media encoder
Looking for a video camera capable of streaming video with good quality and decent price. What camara should I buy?
-
How to set default audio device for java apps on Linux?
I would like to find a way to choose a particular (ALSA) audio device for java applications. How can this be done without reprogramming the application or changing the default ALSA device? I came across "sound.properties", but could not find any info
-
Why can I not see my current usage since my last bill?
I want to see what my current usage is since my last bill (I.e calls and texts) but when I try to do this in my account nothing shows up. Why is this?