ATP CHECK in all storage Location of the Plant

Dear gurus,
we have the stock for the component in the storage location :
Storage Location A 10 PZ
Storage Location B 30 pz
Storage location C 40 pz
In the planned order for this component there is the storage location A.
The ATP check ( in the transaction MDVP) confirm the quantity only in the storage location A, but i would like confim the quantity stock of all the storage location, also having to maintain the storage location A in the position of the component in the planned order.
For example for the planned order the requirement for this component is 30 pz , when i run the atp check the system confirm only 10 pz in the storage location A present in the position of the component, but i need confirm all quantity because present in others storage location, also having to maintain the storage location A in the position of the component in the planned order.
I need see in the avalaible ATP check all the storage location of the plant, there are the customizing setting or material master setting.
Thanks a lot
Daniele Pistilli

Daniele,
First determine which ATP check is being used for your planned orders in OPPJ under plant or MRP group.  Then, also in OPPJ, under 'Determine Check', modify that availability check by ticking the 'no stor locn inspectn' box.
Perhaps you can advise your 'friend' [Luca Malavasi|http://forums.sdn.sap.com/profile.jspa?userID=841888], of this response as well.  He has asked the same question. 
Atp Check see all storage location of the plant
I won't blindly assume that a single person is using more than one userid on these forums.  Many of the moderators do not permit this practice..
Rgds,
DB49

Similar Messages

  • Atp Check see all storage location of the plant

    Dear gurus,
    we have the stock for the component  in the storage location :
    Storage Location A     10 PZ
    Storage Location B      30 pz
    Storage location  C       40 pz
    In the planned order for this component there are the storage location A.
    The ATP check ( in the transaction MDVP) confirm the quantity only in the storage location A, but i would like confim the quantity stock of all the storage location .
    For example for the planned order the requirement for this component is 30 pz , when i run the atp check the system confirm only 10 pz in the storage location A present in the position of the component, but i need confirm all quantity because present in others storage location, also having to maintain  the storage location A in the position of the component in the planned order.
    I need see in the avalaible ATP check all the storage location of the plant, there are the customizing setting or material master setting.
    Thanks a lot
    Daniele Pistilli

    Hi,
    In OPJJ "Scope of Check" Under "storage location Inspection" check the box against " No storage loc Inspection"
    This indicator is used to set the scope of the availability check. It is used to switch off the check at storage location level.
    Test this and revert back
    pavan

  • ATP Check issue for storage location level

    Hi Experts:
       I met a problem when carry out the ATP check, when I create the SO for material A 1 pcs and not maintain the storage location in sales order, ATP carried out and gave me the proposal delivery date(100 days later)  for about this material, the system can not check the storage location level.
       the real situation is for material A, in stock 1000 has 100 pcs, in stock 2000 has 50 pcs, and in stock 3000 has 30 pcs.
       How can the system automatic check the storage location level even I not fill in the storage location in the sales order?
    Thanks and best regards
    Jin

    Jin,
    For this check
    1)Youe storage location shd be automatically determined..Make sure you've done all settings in 0vlk/0vlp..
    2)In MMR-MRP2 make sure you have entered Prod Storage Location..Also in OVZ9 check what stocks you have selected for ATP  for particular check rule..
    3)Also in VA02 Go to Environment-Availability overview..
    REWARD IF U FINDS THIS AS HELPFUL..
    Regds
    MM

  • ATP check in certain storage location based on item category

    hi gurus,
    i need to know whether any one can help me. i need to know how to set the availability check in certain storage location by each item category. such as :
    mat A item category TAN, ATP check only include in SLOC 01,02,03
    but mat A with item category TANN, ATP check only include SLoc 04.
    case:
    in MMBE:
    mat A
    plant 1000 pc
         sloc 01 - 400 pc
         sloc 02 - 200 pc
         sloc 03 - 300 pc
         sloc 04 - 100 pc
    so when create SO:
    1. mat A itCat TAN qty 1000pc
       (Sistem will say that the stock not enough, bcoz stock in Sloc 01,02,03 only 900pc)
    2. mat A itCat TANN qty 200pc
    (Sistem will say that the stock not enough, bcoz stock in Sloc 04 only 100pc)
    actually i prefer to use the standard solution but i think that must be use user exit, if so, do u know which user exit i shuld used, if not maybe u have a standard solution,.
    thank you so much..
    regards,
    cindy
    Edited by: cindy himawan on Feb 22, 2008 6:17 AM

    Hi
    As per my knowledge there is standard solution available for your requirement.. you may need to do some customisation using Z tables..
    Muthupandiyan

  • The system does not get Storage Location of the material from the Contract

    Hi to all,
    We are encountering a problem now regarding the PR to PO conversion.  Our ABAPer has made a background job for the User to convert a PR to PO using ME59N. 
    Background Job : ZPTI_MM_PR_PO_CON
    Program : RM06BB30
    Tcode: ME59N
    Variant : SAMPLE2_ME59N ( Plant, Vendor, POrg, Pgrp.)
    Rule : When the PO is converted the STORAGE LOCATION of the material should be gotten from a CONTRACT/AGREEMENT instead of the SLoc defaulted in PR.
    Problem:  When the backround job is finished, the PO is converted but the STORAGE LOCATION did not get from the CONTRACT.
    Steps done :
    1. Create a Contract (ME31K)
        1.1 Specify the SLOC of the material
    2. Create PR (ME51N) and enter the Contract Number inside the PR
        note : In the PR the material has a Storage Location which defaults from the Material Master.
    3. Run SM36 and enter the job ZPTI_MM_PR_PO_CON
    4.  Set the job to "Immediately"
    5. Click Steps icon and enter the program RM06BB30 and variant SAMPLE2_ME59N
    6. Save
    7. Go to SM37 and check the job if finished.
    8. When the job is finished, check the PR if it has a PO.
    9. Display the PO.
    10. Check if the storage location in PO has gotten from the Contract
         The problem now appeared.
    We have tried to use ME59N alone and not using the background job. The system has gotten the correct Storage Location, thus it got from the Contract.
    Please help what should be checked on our side.  Our ABaper is also currently debugging the program but we
    are seeking help to fasten the solution.
    Best Regards,
    Elynne

    Hi Elynne,
    Definitively, it is a problem with ME59N background process.
    It is better if you can create a message to SAP asking for the solution.
    I only found the next SAP note:
    Note 1287723 - ME59N in backgound does not populate PR details in PO.
    But, I do not know if it will help to resolve your issue.
    I hope this little information can help you in anyway.
    Kind regards,
    Sandra

  • Auto Creation of Storage Location at the time of Goods receipt

    Dear All
    Please tell me how can i create storage location automatically at the time of Goods receipt.
    i already made the configuration in OMJ8 for movement type and required plant
    still, at the time of creating PO its not getting created..
    Please advice
    Narendra C.

    Hello Narendra,
    If you are trying for automatic creation of strorage location for goods movement to special stock, then ithe data will nit be created. This standard SAP functionality.
    Also if you have maintained storage location in the preceeding documents, then it will automatically fetched during goods reciept.
    BR,
    Tushar
    Edited by: Tushar Patankar on Feb 4, 2011 12:50 PM

  • Exclude storage locations from the MRP run

    Hi all,
    Is it possible to exclude stock of specific storage location from the MRP run?
    Thanks for your help
    Thomas

    Hi,
    2 things,
    1. In OMIR for the storage location set that this location is excluded from MRP run (if am right the value to be maintained is 1)
    2. In MM02 go to MRP-4 view of the material master, specify plant & the storage location which you want to exclude & in the field SLoc MRP indicator specify that this is excluded for MRP run (if am right the indicator is 1).
    The step 1 ensures that all materials which are extended to this storage location will by default have the value 1. And step 2 ensures the materials already having this storage location view are excluded from MRP run.
    Regards,
    Vivek

  • How to change the line item storage location during the sales order creatio

    How to change the line item storage location during the sales order creatio

    Hi Kumar,
    I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
    Regards,
    Rachel

  • Where and how to find the storage locatation for the consignment stock

    where and how to find the storage locatation for the consignment stock (customer stock )  for more than one storage location .
    table :msku
    material no    -   werks - batch
    xxx                   sg11  - 200352ac
    table : mchb
    material no    -   werks  -lgort - batch
    xxx                   sg11   sg10   200352ac
    xxx                   sg11   gs11   200352ac
    note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

    Hi,
    Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
    Regards,
    JLN

  • Exclude stock at a storage location from the Productionn Planning run

    Hi,
    We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
    Please suggest a way so that it is excluded from the Production planning
    Regards,
    Sireesh

    Hi Sireesh,
    Please try these following options.
    1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
    2) Try anyof these user exists
    APOBP011 Enhancement for Stock BAPIs (BUS10504)
    APOCF011 Inbound Processing: Stock
    APOCF027 Customer-Specific Enhancements: Stock
    3) Exclude the category from the ATD receipts category group maintained in the master data
    Regards
    R. Senthil Mareeswaran.

  • Default Storage location from the Material master

    Can we default the storage location from the material master into the reservation line item in trasaction MB21?

    enter the production storage location in material master MRP2 view.
    Edited by: Jürgen L. on May 7, 2008 6:52 PM

  • Is it possible to check automati all bookmarks, and delete the not working bookmarks

    Is it possible to check automatic all bookmarks, and delete the not working bookmarks

    Try this extension:
    *CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/

  • How to add storage location in the MBBS transaction out put

    Hi experts,
        I need to add the storage location in the MBBS Transaction report
    out put . what will be the procedure. Is there any standard settings or else I have to copy the program. Plz help me.
    Thanks&Regards,
    Srinivasa rao.V

    I've been able to store the contents of my camcorder on the Mac's HD. I've tried importing the clips from there and get the same result, whether I try to import one or several clips at once, it replies with the same error message as to the missing storage location/instructions. Interestingly, it will nonetheless import the first (or only) one of the clips that I highlight on the import screen.
    When you suggest dragging the files, from where do you mean? The clips per se don't appear in the finder, but only on the import page. The finder show only various fragmented files that aren't complete clips (eg. separate video and index, even sound files), which is too much of a pain to deal with...
    It's true that my original iMovie library was created from an upgrade, but I have since deleted the contents and attempted to reload the clips. Are you suggesting deleting the library completely and starting again, or should I just try creating another event and using that? Don't see why that shoudl work better than "updated projects", but perhaps it's worth a try...
    Thanks again

  • Same storage location to different plants

    Hi Gurus,
    Would like to have one suggestion from u all, i want to assign one storage location to different plants....
    is it recomended??
    Thanks
    Dushyant

    Hi Dushyant,
    one storage location to different plants....
    Is Possible in Statistical way.
    E.g Plant 1000 : Sloc : 0001
    Plant 1100 : Sloc : 0001
    Plant 1200 : Sloc 0001 :: Up to...". n " no. of plants
    In above case it is possible.
    However these are not Logical Units. Having said this Plant 1000 and Sloc. 0001 is one unit. similarly Plant 1100 and sloc 0001 is another Units. etc. in consideration to Inventory Management i.e Stock valuation.
    Material Creation and Extension. etc.
    Hence You can very well give same storage location no. to "N"  number of plants, however they are not the same for operational prospective.

  • Transfer project/ SO stock between 2 storage locations of same plant

    HI,
    We have a requirement in which the we have to transfer  project/sales order stock between 2 storage locations of the same plant.

    Transfer between storage location.
       311 Q - Project Stock
       311 E - Sales Order Stock
    Transfer between storage location to own stock
       411 Q - Project stock to own
       411 E - Sales Order to own

Maybe you are looking for

  • Incredibly SLOW boot from OS X to Windows

    I have problems restarting from OS X to windows and vive versa. I have discovered it MAY involve my USB hub. I have: Intuos 2 Wacom tablet CanoScan LiDE 70 Scanner Logitech USB Headphones Logitech MX Mouse 2 USB harddrives Keyboard APC Battery backup

  • Adobe Bridge Tools

    Hello, I need to change a lot of pictures from RGB to CMYK. To do this I opened Adobe Bridge and under Tools, I am supposed to scroll down and see Photoshop so I can then access Image Processor. I can only see Illustrator there. Any idea why this is

  • How to create one soap interface with two soap action?

    Hi, I need to create one SOAP Interface with two or more webmethods (soap action), for example: Interface: MI_Outb_User Webmethods: createUser, searchUser, deleteUser. Can anybody helpe me?

  • BPC data load for consolidation..

    Once gone live.. how frequently is the data will be loaded for each month.. Is it on daily basis or only at the end of month loading. I understand that if the data is loaded only at the end of the month.. all errors will come only during monthend and

  • 13" macbook pro intel chip question

    I'm considering purchasing the 13" macbook pro. Should I be concened that this model does not have the new intel i chip?