ATP Check Issue - No business system could be determined for logical system

Dear all
Got an issue while executing ATP check on a planned order in product view,
with a message: "No business system could be determined for logical system"
CIF setting wise:
regular business system group maintained and assigned in place,
master data wise:
business system group info fine in product master,
Is there anywhere suggested to check under ATP setting:
category, check mode, business event, check control/check instruction?
Your kindest enlighting is appreciated,
Thank you,
mandy

Dear Mandy,
usually this error is caused by a missing customizing entry:
spro:
Integration with SAP Components
   Integration via APO Core Interface (CIF)
     Basic Settings for Creating the System Landscape
       - Maintain Business System Group
       - Assign Logical System and Queue Type :
Please read the documentation for these two transactions and create the systems.
You need to specifiy there all systems that are in your BSG. The documentation for the customizing of 'name logical system' in APO says:
To enable the transfer of data between SAP R/3 and SAP APO, you need to name both the SAP APO system in which you are working and the SAP R/3 system to which you want to transfer data as logical systems.
I hope this helps.
Regards,
Tibor

Similar Messages

SWO1 - No destination could be determined for logical system

Hi there,
I am trying to call a remote transaction via SWO1, but I am getting the following error:
No destination could be determined for logical system TSTCLNT120
Message no. OL860
Diagnosis
You attempted to instantiate an object with the specified logical system within the distributed runtime environment. However, an RFC destination has not been defined for this logical system.
System Response
The object instance cannot be generated.
Procedure
Define the RFC destination or use the local runtime environment.
I go to SW01 --> Type an object name "TSTC" --> Click TEST --> New Dialog window Clicked on the Full key --> Entered the Logical Name for remote system (ECC), and also Entered Key: SU01 --> When I click on the continue, I am getting the above mentioned error.
I can clearly see that it is looking for mapping Destination for that Logical name. Can someone please tell me what t-code or table I need to go and map the Logical Name with a RFC destination?
Thanks in Advance
Kumar

hi
try these links
Re: R/3 Connections in RFC destination node.
Assign a logical system in RFC
Regards
Sajid

The system could not determin a business area for item 00010

i m getting bellow message while entering stock (MB1C)....
No business area can be deermined for item 000010
Diagnosis : The System could not determine a business area for imte 000010. The item has plant (G001) 7 is assigned to company N001 for which a business area is required. This is caused by incomplete setting in customizing.
Procedure : Before creating the item make sure that you have completely maintened business area assignment in customizing

hi Kartik
Please check whether your company is opted for " business area financial statments" in financial account- global setting of company code. If yes and you want to continue please maintain business area for the plant and material dvision combination under the transaction cde OVF0.
Hope this will solve your problem.

Error message "No business partner could be created for vendor ..."

Dear experts,
I had made all the customizing settings for BP and CVI vendor/customer - BP integration and synchronization settings before. BP creation from vendor and usage within Real Estate was working with no problems. When i tried to create a new BP role recently i must have changed the settings and now when creating BP from vendor (FLBPC1) i get the following message:
No business partner could be created for vendor"
The long text of the message is:
Message no. CVIV_UI013
Diagnosis
No business partner could be created from the vendor selected.
System Response
An error occurred when creating a business partner from the vendor selected. This error prevents data from being transferred and saved. This could be due to the following:
Fields have been left blank in the vendor that are set as required entry fields for the business partner.
Settings for assigning Customizing values for the vendor to the business partner are incorrect.
Procedure
Start the Post Processing Office and check the error message. Make the necessary corrections.
I have checked all my customizing settings one by one but cant locate anything missing or wrong.
Also, in 956054 it is said that i must perform various migration reports, but i believe if it did work before without running these reports, this couldnt not be the problem now.
Any help would be appreciated
Thanks

Hi,
reason is the following.
The customer / vendor doesn't use special attribute to differentiate
between persons and organizations - in opposite to BP.
You can achieve what you want to do by using a BAdI prepared for that:
You'll find this in IMG transaction SPRO:
Cross-Application Components
Master Data Synchronization
    Customer/Vendor Integration
      Business Partner Settings
        BAdI: Data Assignment of Form of Address from Customer/Vendor t
Please read documentation of this BAdI in IMG.
You may use standard implementation CVI_MAP_BP_CATEGORY.
You also may create own implementation of the BAdI, if you want to
differentiate on other attributes.
Hope that helps.
Regards,
Franz

Could not create JCOClientConnection for logical System: SAP_R3_HumanResour

Hi,
For all the standard ESS (sap.com) the JCo connection used is SAP_R3_HumanResources .
All the applications are working fine.
I am trying to add a test Component in one of the (sap.com~eepro) for testing a standard BAPI call for getting user details.
I have used the same Model and the same SAP_R3_HumanResources destination name.
But i get the following error when i try to execute the standard BAPI_USER_GETDetails (non - HR).The other applications for standard components (Vc ) work when i run the application.
My question here is why a custom , local webdynpro when try to make a RFC call using the running already existing JCO connection throws such error.
How could this be solved.Note the connection is running and working fine for all the ESS webdynpros!!
Error:
Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.test.hr.model.Test. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Your experience would be worthy enough.
Regards,
Swathi

Hi Swathi,
Here are some suggestions to trace down to the actual problem.
1) First check if all users are having this issue. (All other applications working and only one application giving problem)
2) If no, then take list of users having this problem and check their portal and SAP accounts
3) If yes, then concentrate on testing the JCo connections and the user account mapped in JCo settings
Possible things u can check is user's portal account (locked or not), SAP account (lock or validity), pernr mapped (validity), JCo user (check for lock), ping and test JCo connections
If none of them are issue, check the logs if there are any trace for this issue. I believe there must be certainly one. That can help u going further.
Regards,
Harini S

In Iproc : The system could not determine the internal source for item

We faced the following error in the Iprocurement
The system could not determine the internal source for item.
kindly note that the item is :
- customer ordered
- customer ordered Enabled
- Shippable
-Internal Ordered
-internal ordered enabled
- OE Transactable
- assigned to a valid organisation
-assigned to mapped category
- Assignment Set is Created +Profile option
-profile options for internally sourced is set to yes
If there is any missing or set please let me know
, best regards
Tareq

hi Kartik
Please check whether your company is opted for " business area financial statments" in financial account- global setting of company code. If yes and you want to continue please maintain business area for the plant and material dvision combination under the transaction cde OVF0.
Hope this will solve your problem.

Could not create JCOClientConnection for logical System:

Hi,
I am facing a wierd problem in using the JCO destinations.
I created a page where it is using some JCO destinations say SAP_R3_HumanResources.
when i open the page it is working for the first time .without closing the page if i open the same page again it is giving the following error
Error connecting using JCO.Client: null
Error connecting using JCO.Client: null
Pernr:Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.swissre.CustomData. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Please let me know how to solve this issue
Thanks
Bala Duvvuri

Hi Bala,
It seems that this is a custom webdynpro application which when executed causes such problem. This might be due to JCO connection not released back to the pool.
Please refer to the following threads and that might be helpful.
Re: JCO Connection close
How to close a model object connection for Adaptive RFC?
You might have to call disconnectIfAlive method on your model.
Regards,
Jigar

Error in CK11n - The system could not determine a cost component split for

Hi All,
When i run CK11n i have following error:
The system could not determine a cost component split for the internal activity with activity type 502000 of cost center 10100.
Procedure
Check the master data for activity type 502000 of cost center 10100. It is possible that no activity price calculation has been carried out for the cost center.
could any one give me solution
Thanking you.

Well, did you run activity price calculation for the relevant cost center(s)?
The CCS you're using for product costing (either your COGM split, or the auxillary) has been marked as a "primary" cost component split. It wants to break secondary costs down into their cost components, and assign those components to components in its own structure.
Wihout a planned CCS for the activity, this isn't possible. (This is normally calculated by KSPI during planning.)
Either calculate an activity CCS is KSPI, assuming that all the prerequisites are in place for that, or uncheck the "primary cost component split" indicator in your costing variant configuration.

Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA

Hi,
I am facing a big problem...I have created WebDynpro Application & when I am running that application from WebDynpro, it's showing the page but giving me the error message as:-
Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA - Model: class com.bcone.bcool.musa.model.MUSABAPI. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
What do I do? what connections I have to check?
pls help.

Hey if you are connecting to SAP system making use of adaptive RFC model you hav to create logical systems(JCOs).So while creating the model you have to specify 2 logical system names(one for model data or on for the meta data).If you have not created the JCOs or if the JCOs are not active then you are going to get this type of error.To activate those JCOs ask your administrator to activate the JCO for metadata of your application.If you are having proper credentials then log on to portal
System administration>webdynpro>expand the local directory>select your project>click on maintain JCOs and activate the JCO for the metadata.
Or else change the logical system in your application.

The system could not determine any material BOMs

Hello All,
I am testing the Preference Processing scenario.
I have a BOM available in Feeder system which gets exploded in Sales Order. The preference indicators and every BOM material is already transferred to GTS system
When I am transferring the Initially BOM then system gives the message that "System could not determine any material BOMs."
The main material already has been flagged for Configurable material.
If I use the transaction /SAPSLL/KMATWLR3_03 (Display worklist of Configurable Material), I am able to see the sales order but when I select the line item and press the push button to transfer the BOM to GTS system gives message that Error in BOM Explosion
Please help me to resolve the issue
Thanks & Regards
Rahul

Hello Dave,
I have maintained the BOM Usage 3 and 5 for Global, Country and Plant level.
The table entries are displayed as below
But still I am getting the same error while transferring the BOM

Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST

Hi ,
I am getting the below error:
Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST - Model: class com.eligibilitymodel1.EligibilityModel1. The SSO ticket needed for authentication to WD_MODELDATA_DEST has expired. Close all applications and logon anew!
Regards
Anumit

Anumit,
when will you get this error?
if you are getting this while using adaptive rfc model follow this link Could not create JCOClientConnection for logical System:
if it doesnot work
try to reimport the certificate or restart the server
Thanks
Bala Duvvuri

Error showing - No price could be determined for subcontracting in CK11N

Hi,
We are facing a problem in CK11N that while we are creating Material Cost Estimate with Quantity Structure, getting an error message..
No price could be determined for subcontracting
Message no. CK468
Diagnosis
The system could not calculate a price for the subcontracting because none of the valuation strategies in valuation variant 001 was successful.
System Response
If the system issues a warning message or an information message, the costing item is used in the cost estimate with a zero value.
If the system issues an error message, it sets the status "KF" (costed with errors).
If the system issues a termination message, the cost estimate cannot be processed.
Procedure
If you have authorization for Customizing, check the valuation strategy for subcontracting in valuation variant 001.
I read many thread already, but no solution is suit my requirement..
please help..

We run the transaction OPN2 and select 001- Planned valuation - mat. Valuation Variant. Db Click on it and select Subcontracting tab.
There Strategy Sequence is defined as under:
Priority......Strategy Sequence
1...............Effective price from Purchase Order
2...............Net Purchase Order price
3...............Effective price from Quotation
and in Quotation in Purchasing option, there is selected - Auto quota arrangement.
please guide.

No Value could be determined for variable ZCE0018

Hi experts,
I am getting an error while running reports for few selections on Sales Org.(without giving site/store) as below
It is working fine with some other sales org.
*Selection covers data from multiple comp.codes which carry more than one Fisc.Yr Variant not possible to report in multiple Fy variants.Plz refine selections.
*No Value could be determined for variable ZCE0018.
Please reply me how to rectify this error.
Thanks in advance.
regards,
<BMP>

Hello,
the description for the error is:
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
Check through the context in the report what variables are affecting. Anyways it is a BW issue not SCM Logistics, please contact someone from BW-BEX or create a SDN thread in BW forum.
Best Regards,
Christian Rosa

JCO connection error:Couldn't create JCOClientConnection for logical System

Hi All,
We are facing a production outage issue.
We have a Federated Portal Network setup where one of our producer goes down automatically (seems on heavy load).
On this Producer server we have 3 Web Dynpro applications deployed and default trace is full with JCO connection error   saying Could   not create JCOClientConnection for logical System: CSVMR_WD_MODELDATA_DEST.
We had issue with max allowed JCO connections so we changed the below mentioned parameters for JCO connection settings in portal:
u2022     Minimum value of JCo Pool Size in total = 80
u2022     Minimum value for CPIC_MAX_CONV per SAP Web AS = 320
u2022     Maximum Number JCo Connections = 160
Please let us know if we are missing on some settings, any help in this regard is appreciated.
Regards,
Priyanka

Hi,
As you have already increased the maximum number of connections/pool size but still you are facing this problem. I would suggest you to check the web dynpro application which might not be able to release/disconnect the JCO connection.
Please check this [Thread|How to close a model object connection for Adaptive RFC?; for more details.
Regards
Puneet

No value could be determined for variable (Material)

Hi,
I have Planning filter where im restricting the Material with a Zvariable. This is a Customer Exit variable. This works fine in development but throws me error No value could be determined for variable (Material) in QA system.
Could some one help me in resolving this in
Thanks

either your code is wrong or you just have no data.
debug the code, check if you do have the desired data according to your code.
regards
Cornelia

ATP Check Issue - No business system could be determined for logical system

Similar Messages

Maybe you are looking for