ATP check not working properly for batches

Dear PP gurus,
I have a problem with ATP check for materials. When i see in MMBE for a material which has 3 batches it shows a problem: The batch a has a quantity 10 but it shows the reserved quantity against this batch as 12. Same is for batch B,ATP check not giving correct results. Please tell me how to correct it.
Some one told me to implement OSS note 1237093 to correct the standard program error introduced with Note 330828.
Please advise how to proceed.

Please answer to the above question..

Similar Messages

ATP Check not workin properly for Batches in MMBE

Dear PP gurus,
I have a problem with ATP check for materials. When i see in MMBE for a material which has 3 batches it shows a problem: The batch a has a quantity 10 but it shows the reserved quantity against this batch as 12. Same is for batch B,ATP check not giving correct results. Please tell me how to correct it.
Some one told me to implement OSS note 1237093 to correct the standard program error introduced with Note 330828.
Please advise how to proceed.

Hi,
Reservation is a kind of requirement. The situation that you describe, that you have in batch A 10 in stock and the reserved quantity is 12 can happen if, for example, you created a production order where this batch is a component, the batch was determined in the order, and either you didn't do an ATP check at batch level, or you issued stock from this batch at a later point in time (without poper ATP).
MMBE is just a report, it is not doing ATP.
I suggest that you review your ATP definitions and processes to find out where the problem is.
Regards,
Mario

Touch pad not working properly for iphone 4s

touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

Try here > iPhone: Troubleshooting touchscreen response
Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
Update the software of your iphone or restore the phone to its factory settings

Java Script Code not working properly for visios in sharepoint 2013

Hi all ,
I have few visios and I am using the visio web part to display and to redirect from one visio to other visio I am using the java script code through content editor web part .
In share point 2010 it's working fine , I was able to redirect to all the visios and code is working fine .
In share point 2013 its not the same , Its not working properly . only for the first time the code is working fine . once it goes to next visio the code stops working .
For example if i click in visio A it gets redirect to Visio B and its stops working , it wont allow to do any other steps .
I have checked with the URL its correct , I am not able to find any error also .
Indresh

This will be likely caused by the Minimal Download Strategy not registering the Javascript on the page reload. You can turn off the MDS feature to test this.
You can either turn off MDS in your site, or register your Javascript functions with MDS to ensure they are called. To do this, you'll need all of your code to be wrapped in a javascript file (Embed this on the page using a <script> tag and
inside that file in a function, which you then register with MDS as follows (I usually do this in the first line of the javascript file):-
RegisterModuleInit("/SiteAssets/YourJavaScriptFile.js", NameOfYourFunction);
Regards
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

ATP check not working

Hi APO Gurus
I have a problem here. When I am trying to create a sales order and try for ATP check, ATP check is not happening. I have checked the allocations also. Allocations are plenty in the planning book for the selected delivary week (material and sold to party combination).
I am getting a message "Product of item 000010 not allocated". And also I have checked for other materials, ATP check is happening. For few materials ATP is possible and for few ATP check is not possible with the mentioned message.
Request you to provide your inputs to solve the problem.
Regards,
Raghava

Hi DB49,
Appreciate your reply for the post. But I have checked ur both suggestions, there are allocations still leftover for the material + customer combination in the allocations planning book. And also the allocation procedure is maintained in product master /N/SAPAPO/MAT1. The ATP check is working for few materials and not working for few materials. So I have compared the master data of the both kinds of materials.
Still the problem persisits. After some amount of research I felt there must be some problem with the triggering of Function Modules related to the ATP check. Can this be a problem.
Request to provide your suggestions.
Regards,
Raghava

ITunes LP Bionic not working properly for iTunes

Christina Aguilera's new iTunes LP Bionic does not work properly on iTunes 9.1.1 on my MacBook Pro 13" running Snow Leopard on 64-bit mode.
It does work properly on iTunes on Windows 7 64-bit.
This is how it does not work properly: It does not automatically refresh the display content when I have clicked on a menu item. It only refreshes the display when I move the scroll bars along the display borders, thus invalidating certain region of the display content making the LP to redraw the display. As a result clicking on the menu items, such as Photos, Song List, Credits, and Discography, etc., do not have immediate effect. Needless to say it does not work at all in full screen mode as there is nothing that can be done to invalidate the display and get the LP to redraw.
Again it works properly on iTunes on Windows 7 64-bit so I would say it's an iTunes on Mac issue.

I actually am on a Dell running Windows 7 and am having issues downloading the iTunes LP from the store. It's in my downloads saved, but I'm getting a message saying: "Christina Aguilera Bionic (Deluxe Edition) iTunes LP was not downloaded. You do not have enough access privileges for this operation." Any ideas? It seems as though I'm having the opposite problem as most of you.

Next-Previous Do not work Properly for lengthly dynamic Where Clause

I have created a View object using Expert Query mode
with following Query:
SELECT LIC_SYS_ID,
LIC_NAME,
TERRITORIES,
LANGUAGES,
MEDIA,
SEGMENT_NAME,
CHANNELS,
ACTIVITY_CD,
LS.LIC_SHORT_NAME,
LS.LIC_AKA_NAME
FROM V_LICENSEE_SEARCH LS
ORDER BY LIC_NAME
Then at run time the following Where Clause staments get added by in JSP based on the users criteria
wClause = "(ACTIVITY_CD = '" + activityStatus + "')"
+ " AND " +
"(LIC_NAME like '" + licenseeName + "%' OR " +
" LIC_SHORT_NAME like '" + licenseeName + "%' OR " +
" LIC_AKA_NAME like '" + licenseeName + "%' ) "
In this case the DataScroller does not work properly It DataTable traves only one setp when I click the "Next" link, But if I use the Drop down list of the Scroller its works fine.
Secondly the "Next" "Previous" links of the DataScroller work fine if I use only one stmt in the WhereClause ex: "ACTIVITY_CD LIKE 'A%'".
Can anybody help me with this, Is this a limitation of DataScroller/DataTable/DataSource tags why does it not work??
Please help me its urgent.
Thanks a ton !!

Thx for the reply, I did try your suggestion It did not throw any exception. Here is the log messages after enabling jbo Debug.
[391] Reusing a cached session application module instance
[392] Getting a connection for internal use...
[393] Creating internal connection...
[394] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
wClause : (ACTIVITY_CD = 'A') AND (LIC_NAME like 'A%' OR LIC_SHORT_NAME like 'A%' OR LIC_AKA_NAME like 'A%' )
[395] Column count: 10
[396] ViewObject : Reusing defined prepared Statement
[397] $$added root$$ id=-2
[398] Application Module failover is enabled
[399] Getting a connection for internal use...
[400] Creating internal connection...
[401] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
[402] <AM MomVer="0">
<cd/>
<VO>
<VO Sz="8" St="8" Def="com.sophoi.ipls.media.tv.businessentities.licensee.LicenseeView" Name="licenseeView">
<Wh>
<![CDATA[(ACTIVITY_CD = 'A') AND (LIC_NAME like 'A%' OR LIC_SHORT_NAME like 'A%' OR LIC_AKA_NAME like 'A%' )]]>
</Wh>
<Or>
<![CDATA[LIC_NAME ASC]]>
</Or>
</VO>
</VO>
</AM>Long postings are being truncated to ~1 kB at this time.

Power button not working properly for iphone 5. Warranty expired on 22 nov 2013 what to do?

Hi,
Power button not functioning properly for my iphone 5. Kindly give advice on what to do. Its warranty expired on 22nd november 2013.

Read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/

SD- Sales Order - ATP check not working for few item in same sales order

Hi Experts,
Need help we activated ATP check but for few item i could not find confirmation qty after availability check. In same SO out of 4 items for schedule line it confirming qty for 2 item but it's not confirming for remaining 2 items though stock is available. Please guide me how to correst and what need to check.
Manoj

Dear Manoj,
As you know, ATP is a big subject & some times its difficult to point the exact problem.
In your case, I suggest you to execute the function module:BAPI_MATERIAL_AVAILABILITY using Tx:SE37
key in selection criteria , in results check the "ATPQTY"- it will show you how much actual stock is available for use i.e. ATP qtty.
still if you find the availability & system not confirming the qtty, then problem could be in checking rule
Tx:OVZ9 check in relevant combination, whether you are considering RLT or not?
is this case with MTS or MTO
because in Sales order -
for MTS - checking rule "A" & MTO checking rule will be "AE"
Regards,
Reazuddin MD

ATP FUNCTIONALITY NOT WORKING CORRECTLY FOR ATO Model

Guru's,
Currently I am facing issue in ATP Inquiry to arrive at schedule ship date, we have set up an ATO Model and its low-level parts for multi level ATP, including ATP rules, item attributes, bom attributes, and lead times and ATP check is based on planned output and enabled 24X7 plan.
When try to perform ATP inquiry either from ASCP/OM responsibility, Instead of showing complete drill down of material constraint at the part level, it "stops" at the model level and shows no availability until the inifinte supply timefence, then unlimited availability after that.
I was earlier able to view the complete ATP pegging details with ATP dates well within ITF, but however when we re run the plan to include additional SO the above behavior is observed.
Can some one help me to reslove the issue, as I am not sure what exactly which is triggering this behavior.
Thanks,

Thanks for the reply, but this note was not addressing the above stated issue. In this note for matched configuration, they are not able to view pegging else they are able to perform multilevel atp check.
Can anyone help me to reslove this issue.
Thanks
Edited by: user604737 on Jun 18, 2011 4:48 AM
Edited by: user604737 on Jun 19, 2011 11:50 PM

Date format is not working properly for Calender value help

Hi Experts,
We have two problems.
1. We want to change the format of date displayed. We want format of dd-MMM-yy. For that we have created one Simple
Type Dictionary Object with Displaying format dd-MMM-yy. It is working
fine for the non editable UI. But once I apply the dictionary type
object as data type for an input field, probem happens. Once the user
choose a date from calender value help the value in the input field is
coming like 01-011-12 not like 01-Jan-12.
The date format is not changing from the calender. But if we set the
display format of the dictionary object to MM-dd-yy or MM/dd/yy or
dd/MM/yy or dd-MM-yy the format conversion from calender to input field
is happening properly.
The only problem once we put MMM in place of MM for the input field
where user is selecting from a calender value help.
2. We want to restrict users from entering the value manually for date input field. The user
should be able only to enter value by selecting from calender value
help.
Please give suitable solution for these problems
Thanks
Shankha

Hi Sankha,
Please refer the links below:
http://scn.sap.com/thread/1659463
http://scn.sap.com/thread/1533443
Regards,
Manoj

SortcompareFunction is not working properly for more than 1 column in advanced datagrid

Hi Guys,
I am using an advanced datagrid with groupingCollection.
I have more than 1 grouped column. How ever I am using 2 sort compare function to sort date and time.
The problem is when I am trying to sort date its workinf properly then when I jump to time column its not working and sorting few rows only inside the column but not the entire column. samething happen when I sort time first and the date is not sorting.
any help will be really appriciable .
Thanks in advance.

In our application we tend to use views to return appropriate values for a particular user.
For example (we do building inspections) the publication item sql is like
select * from inspection_sites where id in (select site_id from v_pda_bi_sites where bi_id=:bi_id)
The view acts like a dynamic parameter table (in this cases looks at experience level, status of sites, and responsibility allocations). Once the driving views are tuned this works quite efficiently, and as the dependant tables for the publication item automatically includes all of the tables in the driving view, the object gets refreshed if there is any change to any of them, even if the site details themselves have not changed

CRM ATP check not working ETC erro

Hello,
When I create a sales order with ATP check I get an error in the log saying BTE 1000820 and BTE 1000821 are not active.
I created the CRMATP flag in R/3, and ATP is working in R/3 (without APO).

Hi,
Check OSS Note Note 620217
This is because of missing customizing.
Use Transaction FIBF in the R/3 system to maintain the following entries under 'Settings -> Process function modules -> ... of an SAP appl.' Prozess Ctr Application   Function module
01000820      CRMATP        PERS_ENQ_ATP_ENTRIES_SELECT
01000821      CRMATP        PERS_ENQ_ATP_ENTRIES_INSERT
Thank You,
Vimal

Search panel not working properly for mysql

JDev 11.1.1.3, MySql 5.1, Windows 7 x64
When you place a search panel with a table using view criteria on a page the search does not function properly.
The search criteria is developed as shown in the VO:
( (UPPER(Patients.card_number) LIKE UPPER( :pCard || '%') ) OR (UPPER(Patients.full_name) LIKE UPPER( :pName || '%') ) )
When you press the search button with a blank form - all records are returned correctly
if you put any data in the search form - it only returns the first record in the table (not related to the criteria).
if you enter a letter in the name field - it returns no records found.
Is there a workaround for this? or has someone patched this already?
Is there a place that you can configure the way the query is built based on the database type?
also if you use the history columns - you get errors saying sysdate is not valid in the query.
I noticed the same issue that has already been raised by others (the search criteria does not show in the panel) but this is merely an inconvenience as it shows when it is run).

Suganth - Umm... there are reasons why this value isn't editable in the design time once you have set it. Ever think about why JDeveloper makes the value read-only? There's also a type map that is non-changeable in the UI; can we hack that too? Unless you know the consequences of changing this (and explain them in your "solution"), you are being irresponsible in posting such a suggestion. If there are no consequences, explain that too, and tell us why the UI prevents you from making this change.
rogerappl - Hack the jpx file at your own risk. There's a very old [url http://www.oracle.com/technology/products/jdev/howtos/10g/MySql/MySQL_and_BC_HowTo.html]article on using ADF Business Components with MySQL that talks about the correct settings for these.
John
Edit.. Roger I see that you've updated the thread - when you created your business components, did you specify SQL92 flavor originally? What type map did you use?
JOhn

Tab not working properly for Datagrid ItemEditor ComboBox

When you run the app type a1 in the find an App combo box then hit the tab key.
Click in the 3rd row in the As Bs column and a combobox will show.
Type a3 and then hit enter. Notice that A3 is saved as the selected item and saved to the dataprovider
Hit the backspace key and hit enter. Notice that the null is saved and nothing is selected.
Type a3 again and hit enter.
Hit the backspce again but this time hit the tab key. Notice the previous value is back. ooops.
{Code}
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx"
               xmlns:vo="valueObjects.*"
               width="100%" height="100%">
    <fx:Script>
        <![CDATA[
            import mx.collections.ArrayCollection;
            import mx.events.FlexEvent;
            protected function aCBLabel(item:Object):String
                if (item != null)
                    return item.name;
                else
                    return "";
            protected function bDG_creationCompleteHandler(event:FlexEvent):void
                bDG.selectedIndex = 0;
            protected function bAFormat(item:Object, column:DataGridColumn):String
                if (item [column.dataField] != null)
                    return item [column.dataField].name;
                else
                    return "";
        ]]>
    </fx:Script>
    <fx:Declarations>
        <vo:ADto id="aDto"/>
        <vo:BDto id="bDto"/>
        <s:ArrayCollection id="aList">
            <vo:ADto>
                <vo:id>1</vo:id>
                <vo:name>a1</vo:name>
                <vo:bs>
                    <vo:BDto>
                        <vo:id>1</vo:id>
                        <vo:aDto>
                            <vo:ADto>
                                <vo:id>1</vo:id>
                                <vo:name>a1</vo:name>
                            </vo:ADto>
                        </vo:aDto>
                    </vo:BDto>
                    <vo:BDto>
                        <vo:id>2</vo:id>
                        <vo:aDto>
                            <vo:ADto>
                                <vo:id>2</vo:id>
                                <vo:name>a2</vo:name>
                            </vo:ADto>
                        </vo:aDto>
                    </vo:BDto>
                    <vo:BDto>
                        <vo:id>0</vo:id>
                    </vo:BDto>
                </vo:bs>
            </vo:ADto>
            <vo:ADto>
                <vo:id>2</vo:id>
                <vo:name>a2</vo:name>
                <vo:bs>
                    <vo:BDto>
                        <vo:id>3</vo:id>
                        <vo:aDto>
                            <vo:ADto>
                                <vo:id>3</vo:id>
                                <vo:name>a3</vo:name>
                            </vo:ADto>
                        </vo:aDto>
                    </vo:BDto>
                    <vo:BDto>
                        <vo:id>0</vo:id>
                    </vo:BDto>
                </vo:bs>
            </vo:ADto>
        </s:ArrayCollection>
        <s:ArrayCollection id="bAList">
            <vo:ADto>
                <vo:id>1</vo:id>
                <vo:name>a1</vo:name>
            </vo:ADto>
            <vo:ADto>
                <vo:id>2</vo:id>
                <vo:name>a2</vo:name>
            </vo:ADto>
            <vo:ADto>
                <vo:id>3</vo:id>
                <vo:name>a3</vo:name>
            </vo:ADto>
        </s:ArrayCollection>
    </fx:Declarations>
    <fx:Binding source="aCB.selectedItem as ADto" destination="aDto"/>
    <s:Form id="AForm" width="700" height="170">
        <s:layout>
            <s:BasicLayout/>
        </s:layout>
        <s:HGroup x="0" y="50" width="670" height="60">
            <s:Label height="25" fontWeight="bold" text="Find an A" verticalAlign="middle"/>
            <s:ComboBox id='aCB'
                        prompt="Enter or Select an A Name"
                        labelFunction="aCBLabel"
                        x="110" y="10" width="375">
                <mx:ArrayCollection id="asList" list="{aList}"/>
            </s:ComboBox>
        </s:HGroup>
    </s:Form>
    <mx:DataGrid id="bDG" x="10" y="140" width="450" height="200"
                 editable="true"
                 dataProvider="{aDto.bs}"
                 creationComplete="bDG_creationCompleteHandler(event)">
        <mx:columns>
            <mx:DataGridColumn id="bidDC"
                               headerText="id"
                               editable="true"
                               dataField="id"
                               editorDataField="value"
                               width="50"/>
            <mx:DataGridColumn id="bNameDC"
                               headerText="As Bs"
                               editable="true"
                               dataField="aDto"
                               labelFunction="bAFormat"
                               editorDataField="value"
                               width="150">
                <mx:itemEditor>
                    <fx:Component>
                        <s:MXDataGridItemRenderer implements="mx.managers.IFocusManagerComponent">
                            <fx:Script>
                                <![CDATA[
                                    import mx.collections.ArrayCollection;
                                    import mx.controls.dataGridClasses.DataGridListData;
                                    import mx.controls.listClasses.BaseListData;
                                    import mx.events.FlexEvent;
                                    import spark.events.DropDownEvent;
                                    import spark.events.IndexChangeEvent;
                                    [Bindable]
                                    public var bAs:ArrayCollection;
                                    protected function cb_InitializeHandler(event:FlexEvent):void
                                        bAs = outerDocument.bAList;
                                        aDto = outerDocument.bDG.selectedItem.aDto;
                                        if (aDto != null)
                                            var t:ADto;
                                            for (var i:int = 0; i<bAs.length; i++)
                                                t = bAs[i];
                                                if (aDto.id == t.id)
                                                    cb.selectedIndex = i;
                                                    break;
                                    override public function setFocus():void
                                        cb.setFocus();
                                    public function get value():ADto
                                        if (cb.isDropDownOpen)
                                            cb.closeDropDown(true);
                                        cb.validateNow();
                                        aDto = cb.selectedItem as ADto;
                                        return aDto
                                    protected function cb_closeHandler(event:DropDownEvent):void
                                        aDto = cb.selectedItem as ADto;
                                ]]>
                            </fx:Script>
                            <fx:Declarations>
                                <vo:ADto id="aDto"/>
                                
                            </fx:Declarations>
                            <s:ComboBox id="cb"
                                            width = "100%"
                                            prompt="{aDto.name}"
                                            dataProvider="{bAs}"
                                            labelField="name"
                                            initialize="cb_InitializeHandler(event)"
                                            close="cb_closeHandler(event)">
                            </s:ComboBox>
                        </s:MXDataGridItemRenderer>
                    </fx:Component>
                </mx:itemEditor>
            </mx:DataGridColumn>
        </mx:columns>
    </mx:DataGrid>
</s:Application>
{Code}
{Code}
package valueObjects
    import com.adobe.fiber.services.IFiberManagingService;
    import com.adobe.fiber.valueobjects.IValueObject;
    import mx.collections.ArrayCollection;
    import valueObjects.BDto;
    import com.adobe.fiber.core.model_internal;
    use namespace model_internal;
    public class ADto implements com.adobe.fiber.valueobjects.IValueObject
        private var _internal_id : int;
        private var _internal_name : String;
        private var _internal_bs : ArrayCollection;
        model_internal var _internal_bs_leaf:valueObjects.BDto;
        public function ADto()
        public function get id() : int
            return _internal_id;
        public function get name() : String
            return _internal_name;
        public function get bs() : ArrayCollection
            return _internal_bs;
        public function set id(value:int) : void
            var oldValue:int = _internal_id;
            if (oldValue !== value)
                _internal_id = value;
        public function set name(value:String) : void
            var oldValue:String = _internal_name;
            if (oldValue !== value)
                _internal_name = value;
        public function set bs(value:*) : void
            var oldValue:ArrayCollection = _internal_bs;
            if (oldValue !== value)
                if (value is ArrayCollection)
                    _internal_bs = value;
                else if (value is Array)
                    _internal_bs = new ArrayCollection(value);
                else if (value == null)
                    _internal_bs = null;
                else
                    throw new Error("value of bs must be a collection");
        private var _managingService:com.adobe.fiber.services.IFiberManagingService;
        public function set managingService(managingService:com.adobe.fiber.services.IFiberManagi ngService):void
            _managingService = managingService;
{Code}
{Code}
package valueObjects
import com.adobe.fiber.core.model_internal;
import com.adobe.fiber.services.IFiberManagingService;
import com.adobe.fiber.valueobjects.IValueObject;
import valueObjects.ADto;
import mx.collections.ArrayCollection;
use namespace model_internal;
public class BDto implements com.adobe.fiber.valueobjects.IValueObject
    private var _internal_id : int;
    private var _internal_aDto : ADto;
    private static var emptyArray:Array = new Array();
    public function BDto()
        _internal_id = 0;
    public function get id() : int
        return _internal_id;
    public function get aDto() : ADto
        return _internal_aDto;
    public function set id(value:int) : void
        var oldValue:int = _internal_id;
        if (oldValue !== value)
            _internal_id = value;
    public function set aDto(value:ADto) : void
        var oldValue:ADto = _internal_aDto;
        if (oldValue !== value)
            _internal_aDto = value;
    private var _managingService:com.adobe.fiber.services.IFiberManagingService;
    public function set managingService(managingService:com.adobe.fiber.services.IFiberManagi ngService):void
        _managingService = managingService;
{Code}

the reason the tab was not working is because it was not changing the selection and just exiting the combo box. So, in the value function add if (cb.textInput.text == "") cb.selectedIndex = -1; This will change the selection as desired and fixes the problem.

ATP check not working properly for batches

Similar Messages

Maybe you are looking for