ATP Ignoring T - Temporarily Assigned status

Hi All,
We're having a problem with ATP checks ignoring stock assigned to status T - Temporarily assigned stock/requirements, and double-promising against any quantity that hasn't been yet allocated to R - Reserved or F - Fixed.
For example, batch 0001 has 400 pieces allocated in F status, and 100 pieces unallocated and in A - Available status. If we enter Order 1 for 100 and save, this stock correctly moves from A to T. If another Order 2 is entered however, we are able to put up to 100 on the order and it will allow us to save. If we put 101, 100 will promise, and 1 will reject... when all 101 should reject, since 100 are already promised to Order 1 and we have no stock in A.
I cannot find anywhere in configuration where this T status is now being ignored by ATP checks. Thanks if anyone can help!
-J

J,
I am unfortunately hopelessly ignorant about the AFS solution.  The best I can do would be to refer you to the SAP Best Practices site for AFS, which has a bunch of config docs that might help
http://help.sap.com/bp_af603/BBLibrary/Content_Library_AF_EN_IN.htm
If you don't get any responses in this forum, the PP forum, you might also try the Industries Solution General forum at
Industries
Sorry & Good luck,
DB49

Similar Messages

  • ATP Temporarily Assigned Stock Problem

    Hi All,
    We're having a problem with ATP checks ignoring stock assigned to status T - Temporarily assigned stock/requirements, and double-promising against any quantity that hasn't been yet allocated to R - Reserved or F - Fixed.
    For example, batch 0001 has 400 pieces allocated in F status, and 100 pieces unallocated and in A - Available status.  If we enter Order 1 for 100 and save, this stock correctly moves from A to T.  If another Order 2 is entered however, we are able to put up to 100 on the order and it will allow us to save.  If we put 101, 100 will promise, and 1 will reject... when all 101 should reject, since 100 are already promised to Order 1 and we have no stock in A.
    I cannot find anywhere in configuration where this T status is now being ignored by ATP checks.  Thanks if anyone can help!
    -J

    Also I forgot to note that we are running AFS.
    Yes.  There is an option in the availability check control configuration for "Include sales reqmts".  If this is checked, ATP is supposed to take into account requirements generated by existing sales documents.  We have it checked, but it is still ignoring these sales requirements.

  • Assignment Status - Summary is blank

    Hi,
    I cannot see any list of assignments (devices or users) in either bundles or policies.
    ZCM 10.3 on Windows boxes.
    Scenario:
    There may be numbers in the assignment status (Targeted Devices, Effective Device,s Not Effective, Pending).
    For example, Pending has a number of 600.
    If I click on this 600 number I am redirected to the Bundle Status page (Device assignments-Devices Pending).
    On this page, the list is empty.
    The table says 1 - 10 of 600, but there is nothing listed at all.
    I can navigate through the pages, 11 - 20 of 600, but still nothing is listed.
    Any ideas?
    Known problem?

    ClemClark,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • How to assign status profile to components in service order

    Hi,
    For my business requirement, I want to assign status to individual components planned in the service order. Even though there is a status button on the component tab, there is no config where I can assign the status profile. We can only assign status profile to the order header and the operations and not to components level.
    As SAP has provided the status button in the component tab, I am hoping that there is a way to assign the status to the parts planned.
    Your help is much appreciated.
    Regards,
    Ram.

    hi all,
    It will be helpful if you give any useful tips on maintaining status for the component level in the service order.
    regards,
    ram.

  • How to assign status profile to marketing campaign ?

    Dear Friends,
    I am working on Marketing Campaign (SAP CRM 4.0) : I want to customize a new status profile for campaign. I create a new one and I don't know where I assign it to camapign : I searched in SDN and I found a message : "to assign status profile, you have to do when you customize campaign type : Marketing -> Marketing Planning and Campaign Management -> Basic Data -> Define Campaign Types/Objectives/Tactics : in this customizing point, when you define campaign type, here is a status profile field".
    The problem is I did not find any "status profile" field in this customizing point.
    Thanks in advance for your help.

    Hi,
    Pls follow below said path to create User Status profile
    CRM--> Marketing > Marketing Planning and Campaign Management> General Setting --> Change Status Profile for User Status
    Once you create Status profile you can see the same in the profile field of Campaign. You will have to assign this profile in the campaign then you can see the statusses in Change Status field,. But these stausses can not over write the system statusses.
    Hope this will help..
    Rgds
    Mallikarjun

  • Person type and assignment status for terminated employee

    Hi,
    When I terminate an employee, is it possible to default the field "type" on "Person type and assignment status for terminated employee" section into another value? Its default values is: "Ex-Employee released".
    Thank you.

    Navigate to Work Structures -> Status and query for all rows with system status Terminated Assignment. select your required assignment status as Default. Untick the other default.

  • Assignment Status/Ending Employment

    Apps version 11.0.3
    Oracle HR North American Users Guide states that to end one of many assignments you should use 'Terminate Process Assignment' status (with payroll system status of process). We have not system status of 'Terminate Process Assignment'.
    From a Oracle Published Bulletin (66449.1) states that the end employment form should have a field 'Last Standard Process Date' field. Our form does not include this - which version of the application does?

    Final standard process is not used for US legislation, we use Final Process Date for US. You can use any kind of assignment status, which has SYSTEM_STATUS as TERM_ASSIGN.

  • 11G Grid control - Target is temporarily in status pending state.

    Hi,
    I'm using 11G OMS, where at a point of time I can see many unknown targets with message "Target is temporarily in status pending state."
    There are different databases running on different hosts are showing the same error.
    Thanks
    KSG

    KSG,
    Can you try below commands on agent to get status & upload/reload , last upload time & target being monitored
    Also have check in /etc/hosts of agent host should be in below format
    <IP> hostname.domainname hostname
    Check ping telnet for connectivity between agent & OMS
    HTTP Console Port : 7789
    HTTPS Console Port : 7800
    HTTP Upload Port : 4890
    HTTPS Upload Port : 4900
    Agent Port : 3872
    Repository Port : 1521
    Enterprise Manager Central Console Port = 4889
    Enterprise Manager Central Console Secure Port = 1159
    emctl status agent
    emctl upload
    emctl reload
    emctl config agent listtargets Thanks,
    Ajay More
    http://www.moreajays.com

  • Assignment Status Change Requirement.

    Hi Experts ,
    We have a requirement in a HR report , where we have to capture the "Data Entry" date for assignment status change.
    for example :
    If an employee assignment status changed to inactive from active on 01-OCT-2012 , and the data entry into oracle is on 18-OCT-2012 , I have to capture the "date of entry into oracle i.e date of assignment status changed in Oracle , in this example 18-OCT-2012".
    Initially i felt to use the "Last Updated Date" but if some data is changed in assignment form on 19-OCT-2012 in "CORRECTION" mode , the last updated will be override with "19-OCT-2012" , but the original date the assignment status changed is on 18-OCT-2012.
    Any help or pointer please to achieve the requirement.
    Thanks
    VJ--

    You need to audit the assignment table.
    oracle.anilpassi.com/audit-changes-in-oracle-hrms.html

  • Changed Assignment Status.

    Hi All
    For an employee, I have changed the status from 'Active Assignment' to 'On Vacation with Salary' on 10-Apr-2008 and again to 'Active Assignment' on 20-Apr-2008. Now when I query for this employee through backend I am seeing 3 assignments.
    I am using Asg_Status in fast formula calculations but as this employee has 3 assignments, which assignment will fast formula consider?
    I am getting error for this employee and for the other employees whose status is not changed, there are no errors.
    I have few doubts about this:
    Which assignment status fast formula will consider while doing calculations?
    How to take into consideration the various Assignment Status for calculations?Regards
    Rahman

    Hi Rahman
    When you query the assignment table it shows 3 records that are active on different dates. So at one point of time there is only one record active. In your query you can add a condition that can check on current date which record is active like
    select *
    from per_all_assignments_f
    where person_id = 1234
    and sysdate between effective_start_date and effective_end_date

  • IRecruitment Applicant Assignment Status Update

    Folks,
    I need to update the assignment status of an applicant. Which API could I use for this? Checked the Oracle Repository but cant find anything their.
    Issue is I have some custom assignment statuses e.g. Received Application, Background, Prescreened etc. and its important to realize that all of these correspond to the same system status i.e. Active Application.
    Would I be able to update these using APIs or APIs will only update system status?
    Thanks for everyone's time.

    Thanks JeddahXP. I looked at hr_assignment_api.UPDATE_APL_ASG procedure and in the parameter list in Oracle Repository, it is mentioned for the parm P_ASSIGNMENT_STATUS_TYPE_ID - "Assignment status. The system status must be the same as before the update. Otherwise one of the status change APIs should be used."
    I want to change the user defined statuses in which the system status remains unchanged. I should be able to use this. Thanks.

  • How to assign status profile to Business partner

    Hi Gurus,
    in sap crm 7.0 web ui
    i want to restrict particular user group to only" see" accounts it means only  "display"  view this we can achieve through status profile but how it is configured i don't know...can somebody help me understand it.
    Thanks,
    Gaurav
    Edited by: wwgauravshah on Nov 4, 2011 2:21 PM

    hi PP,
    in sap crm7.0 web ui
    1.i have a requirement that once the account is created manually one at a time and while saving bp, a  "opportunity"/lead transaction should get created automatically, this we can achieve with the help of action workflow ...can some body tell me how to configure it...exactly where we can assign action profile to BP.
    2. once sales manager makes any changes to BP master, change update should trigger action workflow to inform all employee responsible automatically about changes.
    please help me it's critical....
    Thanks,
    Gaurav

  • Assign status profile automatically when upload documents in cFolder

    Hello all,
    Is there any way to make the automatic assignment of a state profile to documents that are upload into a collaboration of cFolder?
    At this time we do it manually, but carries to assign the state profile every time we upload a new document.
    Best Regards,
    Jennifer Lohan.

    Hi
    Use FM CFX_API_STATUS_PROFILE_ASSIGN somewhere in any user exit or BADI (let me know the scenario)
    we pass status profile GUID and the Folder / Doc /collaboration GUID into the FM and it attaches the status profile to desired object.
    regards
    Alok

  • Change Employee Assignment Status

    Hi,
    I have a very urgent requirement in Oracle HRMS R 12.1 version
    my requirement is when an employee taken annual leave, then the status in th assignment window will automatically change to 'Annual 'Leave instead of 'Active Assignment'.
    can anybody have an idea about this,,please provide me the details and procedure to do this thing. Your early response will be highly appreciated.
    Thank You

    You can have a user hook on absences and update the table per_all_assignments_f using the API hr_assignment_api for the period when the employee is on Annual vacation. You'll have to do an Update twice - one for the absence start_date and one for absence end_date.
    So you assignments_f table wud look something like this -
    01-Jan-11 to 15-Jun-11 -- Active
    16-Jun-11 to 30-Jun-11 -- Annual (suspended)
    01-Jul-11 to 31-Dec-4712 -- Active
    Just curious, why do you want to do something like this ?
    You already have entries in Per_absence_attendances for the absence/leave. What is the need to change the assignment_status ?
    cheers,
    VB

  • EA2 - Global Ignore List/Monitor SQL Status?

    What is the Global Ignore List preference?
    What is the triangle to the left of the Execute Explain Plan icon in the SQL Worksheet that is grayed out that says "Monitor SQL Status" when you cursor over it?
    I am just poking around and am curious.
    Mike

    Global Ignore list is for all file or extensions you want SQL Developer to ignore in any processing.
    The Monitor SQL Status runs a report on a long query e.g on the SH shipped sample schema run:
    SELECT count(*) FROM sh.customers c, sh.sales s WHERE c.cust_id <> s.cust_id AND c.cust_id < 200;
    As it runs hit the Monitor SQL icon and you'll get a report. Short queries don't show the report. It does need some formatting work, but you'll see the report.
    Sue

Maybe you are looking for