ATP with stock in transit

Hi frieds,
When we are doing a stock transfer with 641, the receiving plant ATP checks not including the incoming transit stock.
How can i include Stock in transit stock in ATP?
I checked OVZ9, It's supports only for 303 and 313 movement types?
any ideas??
Thanks
Rajan

yes you can set a MRP indicator in MRP 4 view (you have to enter the storage location to get the section)
from help.sap.com:
the MRP indicator at storage location level excludes this storage locationu2019s stock from the planning run. Thus, the storage locationu2019s stock is not contained in the available stock at plant level, nor is it included in the planning run. The exclusion of storage location stock is only relevant to the planning run - for example, this stock is still completely available for withdrawals.

Similar Messages

Rules Based ATP with Stock Transport Order

Hi All,
Can we use Rules Based ATP with Stock Transport Order..
Where to assign the business transaction to the STO order type ?
Regards,
Biswajit

Hi,
Please follow the link
Re: Rules based product substitution in STO
Thanks,
Pavan Verma

ATP for 'Stock in transit' for 3rd Party scenario

We have a scenario:
For warehouse replenishments an STO is created and then a delivery is subsequently created for the STO. Once the delivery has been shipped out of the manufacturing facility (post goods issued) the materials on the delivery are transferred from unrestricted-stock at the manufacturing facility to stock-in-transit at the receiving warehouse. Once the stock is in transit to the third-party warehouses, ATP should then take it into consideration when deliveries are created from the third-party warehouses to customers.
Now how to take the ATP check for 3rd party del. into consideration for STO?
STO document type is UD
Goods issue movement type is 641
Goods receipt movement type is 101

Some useful info here..
http://help.sap.com/saphelp_47x200/helpdata/en/2b/b22d3b1daca008e10000000a114084/frameset.htm

Problem with Stock in Transit

Hi, all.
I can't recieve material from Stock in Transit. When I tired to do with movement type 101, the system displays error AA303 "You cannot post to this asset (Asset 18000357 0 deactivated)"
Thx.

Dear Jürgen L.
Could you please describe the meaning of "Activate the asset master" function. Our Asset accountant doesn't understand your proposal with usage of AS02.
Regards
T. Yusupov

Stock in Transit -ATP Category

Dear Friends,
I'm facing problems with regards to viewing the Stock in Transit ATP Category in product view.
The requirement is that from the PGI of delivery at supplying location to GR of goods at the destination location, the quantity should be visible in product view of destination location as Stocks in Transit.
Kindly let me know if there is any setting required for the same or if the system displays the same as default, then what could be the cause for it not happening currenlty.
Looking forward to hear from you.
regards,
Sudhir Gulati

Dear Vijay,
Great to hear from you.
Kindly let me know where to make those settings in Customizing.
regards,
Sudhir

Intial upload of Stock in Transit Material with in plant / Inter company

Hi Friends,
How can we do Intial upload of Stock in Transit Material with in plant / Inter company.
In this case accounting entries has already completed while doing post goods issue (thru SD route) or in 1st step 301 mov. type.
Now the material is in transit. While we go to new system how can do this without hit of aacounting entries.
I tried 565, it Intial upload of stock to Blocked, so accounting entries took place.
Regards
Sai Krishna

Hi,
What I am proposing is:
At this juncture both plants accounting has been done in legacy.
Coming to new system whatever stock we upload that much value only updated in receiving plant. In reality there is difference between legacy & new system in this case. In legacy stock in transit value also added in receiving plant (since we did PGI). If we do stock upload with 565 mov. type .. intial entry to blocked stock i.e value of inventory is matching the legacy.
Actual receiveal of material do transfer posting from blocked stock to unresticted stock.
What is your opinion.
We won't upload the G/L inventory, it will come thru stock upload for kishore infor.
Regards
Sai Krishna

Stock in transit to the Original Stock( STO process with Billing)

HI All ,
Here is an Issue on Stock Transport Order with Billing
A STO (Purchase Order) Is raised Which consist of 6 line Items.
VL10B is Done and Outbond Delivery no generated.
With this Outbond Delivery no PGI is done for All Line items.
Goods Receipt is Done(RECIEVED quantity will be in Quality Inspection Stock).
So through T.code QA32 the End User had done
a) Accepeted 5 line Item and 1 line Item he had sent as" Return to Vendor".
Note: ALL Items in this STO process are Exiceable Items.
Because of this Return to Vendor of 1 item in QA32 a material document is generated with
Movement type 122 and 1 Item is found in material is Transit in recieving plant .
But now The User wants:
a)To cancel the Material Doc generated with movement type 122 and
b)To bring back the Line Item1(Return to Vendor ) STOCK back to the "Receiving Plant"

Hi,
Since your 122 was created from QA, I don't think you can cancel this document in MIGO.
You may have to perform 101 to receipt from stock in transit again.
Phyllis.

On order Stock and stock in transit with date variable

Hi experts.
İt may be an easy question.
We need to see on order stock (menge,can be seen T code MMBE) and stock in transit(T CODE MB5T) with date variable.
Any T code or table...?
I mean that for exp: on order stock and sttock in transit on 02/02/2012..
Thanks in advance..

Hi,
as per my knowledge you have to develop report using following table
how many Po closed for material
how many MIGO happens and how many remain etc
table EKPO
EKKE
EKBE
MSEG
MKPF
[Report|http://wiki.sdn.sap.com/wiki/display/ERPLO/SAPStandardReports]
[tables req to get date wise stock report;
Regards
Kailas Ugale

ATP qty to include stock in transit

Hi,
How can we set-up that we include the stock-in-transit (transfers via STO - in transit) to be included in the availability check or ATP quantity?
Help.

Hi,
If u want to consider the stock in transits. in OVZ9 to be checked.
the purpose of the indicator is whether during an availability check, the system takes into
account any stock that is being transferred into the plant.
Regards,
Sasikanth.Ch

Stock in transit with respect to Delivery

Hello MM Gurus,
I created a Transport scheduling Agreement with SD route ( Intra company). I created a Delivery in VL10B & Post the Goods issue through 641 Mvt. In recieving plant I post the GR against delivery. I am developing a report for stock in transit Qty with respect to the delivery. How can I link the delivery to Stock in transit Qty?.Please guide me how to proceed.
Regards
Senthil

Hi
Stock in Transit can be viewed in report MB5T.
In the Material document of the 641 movement you have the
delivery note number present done through VL10B.
In that way you can link up the Goods in transit to the delivery.
In table MKPF & MSEG you can get the delivery note number.
Thanks & regards
kishore

Stock in transit report with delivery # and date included

I need a report similar to MB5T that will also show the delivery number and goods issue date. I couldn't find anything standard and was going to ask an ABAPer to create something. When researching where stock in transit is stored, I keep finding that the value should be in MARC-TRAME; however, in our system that value is blank (even for a material that shows stock in transit in MB5T.) Is this value stored in another location as well?
Thanks in advance for your help.

Thanks for the response. I know that I can view the PO history by going into the individual POs, but we want something that will show all of the POs at once without having to click in each individual one.
Thanks!

Interco- Stock in Transit

Hi Experts
Scenario: Intercompany STO. Shipping plant posted the Goods issue and the material is in Transit.
Now how do i get the stock in Transit Material cost (Std Cost) in Report.
I used the MB5T it shows the Purchase Order Net Value only and not the STD cost of Recieving plant. MB52 not clear as well.
Could any one advise...
regards
RG.

Hi,
Stock in transit keyfigure will display only EI orders (incase of VMI
scenario) and AH orders (if you create inbound delivery).
If you integrate stock,CS orders only will be available in /sapapo/RRP3.
The root of the problem is in the setting from Intransit key figure:
from a planning area management point of view it reflects
the setting used in the standard SNP planning area but the customizing
of the category group used there is different from the one used in
standard systems.
Actually you added category CS there. But category CS has a atp category
type 0, which means stocks actually. In the SNP planning books by design
stocks are read separately from other orders because have to be
considered in the ATD computation.
Therefore if you need to read orders with category CS you should
consider it in the category group assigned to the ATD receipts key
figure and to the stock key figure.
This customizing could be applied at the planning area level, as
described above or at the master location level, SNP tab.
In this case you can specify there the category groups which have to be
used in order to consider stocks, ATD receipts and ATD issues about all
products assigned to the used master location. Please refer to the
related F1 helps in order to get more information about.
You can get more information at note 591310.
Regards,
Sunitha

How to make an account assignment for stock in transit inside obyc

hi experts,
i am sure i dont know as to what transaction type shoudl i use to allow postings to stock in transit account. please help me with step by step processes involved in it.
best regards
sayeed

It is not possible to define default Acct Assgmt cat for particular plants in STO. Instead you can make it default at client level (irrespective of doc type) for particular users.
For doing so you need to just maintain user parameter KNT with value equal to your Acct Assigmt cat. You can maintain user parameter in SU01/SU3. This means whenever this particular user run the transaction which includes act. assigmt cat will have default act assigmt cat.
Hope it might help you somewhat.
Cheers,
Parag Mahajan

Inventory posting - stock in transit G/L account

Hello!
We have a unique requirement that we need to post the stock in transit inventory only if the delivery is for one particular customer (sold to party). It is our own company but not on SAP hence, on the books, an inter company transaction. All that is different in this case is the account assignment group of the customer which basically is no help in configuring OMWB (G/L account determination for inventory postings).
The material/plants/movement types are all the same for all transactions, thereby providing us with no 'uniqueness' in this particular transaction to post these stock in transit inventories to a different G/L. I could possibly look at having another movement type if that can help but then again, how will that be valid only for a particular transaction with this customer, I am not sure...
Can anybody provide me with a step by step instructions on how can this be achieved, if it indeed can be? Appreciate any help or posting here if anyone wants any more clarifications on the issue...
Many thanks!

Hi,
As you might already know that the G/L determination happen based on Movt type and the valuation class. in your case as the movt type and the val class are same, you willl not be able to customize to post it to different account
so for this you do 2 ways:
1: you create a new delyvery type and a new movement type so that you can configure the account determination (OMWB).
2. you can influence the account determination by writing a code in the user exit ZXMBCU02 here you can force the system to post it into the different G/L account.
Hope this helps,
Vikrama

Table for Storage to Storage Stock in Transit.

Dear Friends,
There are two storage locations : A and B
Created STO and Posted goods issue with VL10B & VL02N from Storage Location A but not received in Storage Location B
I can find this stock in report MB5T.
Now my requirement is to have the Table and Field for the stock in Transit for a material specific to storage Location B.
I am unable to find them in MARC or MARD and MSEG also does not give the right picture. This is for a report to be developed.
Thanks

Hi Gusu.
You can use, the tables EKET, EKKO and EKPO, the report MB5T use the next criteria for extract the information.
Get PO's within the selection criteria, with delivering plant
and more goods issues than goods receipts.
SELECT matnr ekpoebeln ekpoebelp pstyp sobkz umren umrez meins werks
       ekkobukrs eketmenge netwr waers wamng wemng wkurs kufix reswk
       ekpo~menge AS bstmg ccomp bsakz retpo
       INTO CORRESPONDING FIELDS OF TABLE xmdbs
       FROM ( ekko INNER JOIN ekpo
              ON ekkomandt = ekpomandt
              AND ekkoebeln = ekpoebeln
            INNER JOIN eket
            ON ekpomandt = eketmandt
            AND ekpoebeln = eketebeln
            AND ekpoebelp = eketebelp
       WHERE matnr IN xmatnr
         AND werks IN xwerks
         AND sobkz IN xsobkz
         AND pstyp IN xpstyp
         AND elikz IN xelikz
         AND reswk IN xreswk
         AND ekpo~loekz IN xloekz
         AND ekpo~bstyp IN ('F', 'L')
         AND reswk <> space
         AND eketwamng <> eketwemng.

ATP with stock in transit

Similar Messages

Maybe you are looking for