ATT Option Ultra Express Card Crashes Snow Leopard (Mac OS 10.6)

My Macbook Pro ran hot from continual SyncServer issues and Disk Utility Permissions that were unrepairable in Mac OS 10.5.8 Disk Utility.
So I upgraded to Snow Leopard and the Permissions pretty much cleared up, but a new problem arose:
My AT&T Option Ultra Express Card crashes Mac 10.6 as soon as it is inserted in the MP Pro, even after removing Globetrotter and launch2net software.
It seems as if Option needs to release a firmware upgrade to work with Snow Leopard, or Apple needs to sort out the incompatibility of Express Cards.
Until then, I'm paying AT&T monthly for mobile Internet service that is now unusable.

Since I've updated to Snow Leopard I've the same problem: CS4 crashes every time I quit it, but it seems to work properly.

Similar Messages

  • Intel card with snow leopard

    Hey,
    Okay so I have the newest model of the black MacBook (2.4, 2g of ram). I read about
    how the new MacBooks will have NIVIDIA graphics card for Snow Leopard support. I'm just wondering if this my mac will run it crappy? My computer is only 9 months old and I understand technology is always growing but I just want this new OS release to be like Vista in the sense that older system will run it poorly!
    Thanks in advance!
    Austin

    austinpaul wrote:
    Hey,
    Okay so I have the newest model of the black MacBook (2.4, 2g of ram). I read about
    how the new MacBooks will have NIVIDIA graphics card for Snow Leopard support. I'm just wondering if this my mac will run it crappy? My computer is only 9 months old and I understand technology is always growing but I just want this new OS release to be like Vista in the sense that older system will run it poorly!
    Thanks in advance!
    Austin
    It should be fine. All indications are that Snow Leopard is designed to be more efficient overall as compared to the bloatware that Microsoft tends to put out for its operating system. The greater support for 64-bit processors should also help improve performance.
    Certainly a discrete GPU will be better for certain things like 3D gaming, but most of the applications that most people use should run fine on the X3100. I don't think it'll run any worse, but I suppose any newer machine with a discrete GPU will run better. That's always been the case, so it's not anything different.
    http://www.apple.com/macosx/snowleopard/

  • Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

    Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
    == This happened ==
    Every time Firefox opened
    == I tried to update firefox add-ons ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    Try a new profile. See [[Recovering important data from an old profile]]

  • Two iOS devices and a Snow Leopard Mac: trying to sync photos

    My wife’s tech support group, that would be me , is failing in attempts to find an easy way to sync her photos between iPhoto on her Snow Leopard Mac and her two iOS 5 devices using iCloud.
    The bottom line is how best to manage photos during a time all devices are not on iCloud.
    Two problems:
    1. She now has the two iOS devices reporting different numbers of pictures and slightly different albums. Shouldn't they be exactly the same?
    2. Is it better to have her sync her Snow Leopard Mac to the iOS devices using iTunes or iPhoto.
    Any basic tips appreciated. Including if this is not the correct Community for this post.
    Thank you.

    You are in the correct community for posting this question. Most people would never even think to ask. That's very thoughtful of you. Anyway .... to the point about syncing photos.
    I do not use Photo Stream and use iCloud for very little as well. I still sync with iTunes because that works for me and I am used to doing it that way. I am running Lion on my MacBook so I have everything I need for iCloud, but .... This is how I do it.
    Connect the iPad to the Mac and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Photos Tab on the right.
    Select iPhoto as the folder from which you want to sync.
    Click on all of the albums, events, faces, that you want to sync.
    Make sure that the Sync Photos heading is checked/selected.
    Click on Apply or Sync in the lower right corner of iTunes

  • I have 3 macs. 2 are Lion, 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

    I have 3 macs. 2 are Lion, but 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

    What version of word do you have? The TS3938 sounds like it's a PowerPC app- written for an old architecture that is no longer supported in Lion. If this is the case, your files are fine- you just need a newer version of word that will run in Lion in order to open them. The newest version (2011) should be readily available anywhere, and has worked fine for me ever since I switched to Lion on release day....

  • Program fails in Krb5LoginModule on Snow Leopard (Mac OS X 10.6)

    Hi,
    FWIW, I've already file a bug report with Apple for this, but maybe you can help me. We have a program that authenticates against Active Directory using Krb5LoginModule. It's been working for years under Mac OS X, Windows, Linux and FreeBSD, but under Snow Leopard (Mac OS X 10.6), using JRE 1.6.0_15 it fails with the following stack trace:
    09:16:36,451 ERROR LoginDialog:225 - Password check failed: java.lang.IllegalArgumentException: EncryptionKey: Key bytes cannot be null!
         at sun.security.krb5.EncryptionKey.<init>(EncryptionKey.java:214)
         at sun.security.krb5.EncryptionKey.acquireSecretKeys(EncryptionKey.java:191)
         at sun.security.krb5.EncryptionKey.acquireSecretKeys(EncryptionKey.java:159)
         at com.sun.security.auth.module.Krb5LoginModule.attemptAuthentication(Krb5LoginModule.java:665)
         at com.sun.security.auth.module.Krb5LoginModule.login(Krb5LoginModule.java:542)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
         at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
         at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
         at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
         at de.unikoeln.rrz.uklanadmin.services.LoginService.checkPassword(LoginService.java:47)I've read the source and found that pre-auth works. Actually that's all we care about, we don't need the keys at all! But this call in Krb5LoginModule fails:
                  // update keys after pre-auth
                  encKeys = EncryptionKey.acquireSecretKeys(
                   password, principal.getSalt());Please refer to http://openradar.appspot.com/radar?id=76405 for more details.

    Thanks. I'd already set debug=true in the config file (and with map.put in your example). Apple does indeed use /Library/Preferences/edu.mit.Kerberos instead of /etc/krb5.conf. I can see that the settings there are picked up by programs I run in the Terminal, e.g. kinit. I'm not so sure they're picked up by the JDK. I have tried to set permitted_enctypes to just des-cbc-crc, but that didn't seem to have any effect.
    As for your code example, the result is exactly the same (as I had expected). krb5.initialize() works fine, but in login(), at exactly the same spot in the source, I get exactly the same stack trace. For reference, it's this block in attemptAuthentication():
      669                   // We can't get the key from the keytab so prompt
      670                   if (encKeys == null) {
      671                       promptForPass(getPasswdFromSharedState);
      672  
      673                       encKeys = EncryptionKey.acquireSecretKeys(
      674                           password, principal.getSalt());
      675  
      676                       if (isInitiator) {
      677                           if (debug)
      678                               System.out.println("Acquire TGT using AS Exchange");
      679                           cred = Credentials.acquireTGT(principal,
      680                                                   encKeys, password);
      681                           // update keys after pre-auth
      682                           encKeys = EncryptionKey.acquireSecretKeys(password,
      683                                                           principal.getSalt());
      684                       }
      685                   }The call in line 673 succeeds, but the one in line 682 fails. The reason is in this method:
        182       public static EncryptionKey[] acquireSecretKeys(char[] password,
      183           String salt, boolean pa_exists, int pa_etype, byte[] pa_s2kparams)
      184           throws KrbExceptionThere it's this part:
      204           EncryptionKey[] encKeys = new EncryptionKey[etypes.length];
      205           for (int i = 0; i < etypes.length; i++) {
      206               if (EType.isSupported(etypes)) {
    207 encKeys[i] = new EncryptionKey(
    208 stringToKey(password, salt, pa_s2kparams, etypes[i]),
    209 etypes[i], null);
    210 }For one of the values in etype[], the stringToKey method returns null. The source code is taken from OpenJDK. It's not available with Sun's JDK, so I haven't been able to step through that part in the debugger.
    Edited by: TyrionLannister on Sep 18, 2009 2:21 AM (corrected a few mistakes)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Migration of files from Snow Leopard Mac to Mavericks Mac

    Ethernet cable connection.
    Mavericks Mac.
    The window: Select the information to transfer - Choose which information you'd like to to transfer to this Mac.
    "Checking "My Name" computer", which is the Snow Leopard Mac
    Spinning pin wheel, and the Continue button is dim.
    Snow Leopard Mac.
    The Migration Assistant window: Connect to the other Mac.
    "Looking for other computers".
    Spinning pin wheel, and the Continue button is dim.
    Now my question is, has the Mavericks Mac made a successful connection to the Snow Leopard Mac and because of the 300/350GB of files on it, the Mavericks Mac is taking a long time locating the files that would be transferable? If so, how long should "Checking "My Name" computer" take before I will be able to select what I wish to transfer? And how long would it take to transfer 300/350GB via ethernet cable connection?

    Ended up making a connection via Firewire to Thunderbolt adapter.
    Restarted SL Mac in target disk mode.
    Had to restart Mav Mac and after a bit of fiddling around, a connection was finally made. Info is now being transferred from the SL Mac to the Mav Mac.
    Three to four hours to go.

  • I deleted my Mail app sometime back. I reinstalled it again, today, on my Macbook Snow Leopard Mac OS but when I try launching Mail, it says ' You have Mail version 4.0(1075/1085). It can't be used on Mac OS X version 10.6.8(Build 10K549)",

    I deleted my Mail app sometime back. I reinstalled it again, today, on my Macbook Snow Leopard Mac OS but when I try launching Mail, it says ' You have Mail version 4.0(1075/1085). It can't be used on Mac OS X version 10.6.8(Build 10K549)",

    The Mail version for your machine is 4.6 (1085)   You can get it via the Combo updater.  Mac OS X 10.6.8 Update Combo v1.1
    Then follow with software updates to pick up the most recent security and iTunes updates.

  • I curently have Snow Leopard MAC OS X 10.6.8 & want to upgrade to Mountain Lion - would I encounter any problems?

    I curently have Snow Leopard MAC OS X 10.6.8 & want to upgrade to Mountain Lion - would I encounter any problems? If so -- what?

    mende1 wrote:
    2. OS X Lion and Mountain Lion aren't compatible with PowerPC applications. After upgrading, if you have a PowerPC application (as Office 2004, AppleWorks, old Final Cut Pro editions, etc.), they will be moved to a special folder and they will stop working. Check that your apps are supported > http://www.roaringapps.com
    If you are unable or unwilling to update to Intel versions of your PowerPC applications (if you have any), you can install Snow Leopard Server (with Rosetta) into Parallels or VMWare Fusion and continue to use most PowerPC applications concurrently with Lion or Mt. Lion:
                                  [click on image to enlarge]
    Snow Leopard Server is now available from the Apple Store for $19.99 + sales tax & shipping: 1.800.MYAPPLE (1.800.692.7753). Apple Part Number: MC588Z/A (telephone sales only)

  • I can't use my Mail application on my  10.6.8 Snow Leopard Mac

    I can't use my Mail application on my  10.6.8 Snow Leopard Mac.
    Any suggestions?

    iCloud is not supported on 10.6.8, the minimum is Lion 10.7.2.
    You can make mail work by manually entering the account however:

  • Can I save treo 650 unlocked gsm sms messages to my snow leopard mac?

    Can I save treo 650 unlocked gsm sms messages to my snow leopard mac?
    - jpg 
    Post relates to: Treo 650 (Unlocked GSM)
    Post relates to: Treo 650 (Unlocked GSM)

    Hard reset the device since there is nothing on it http://kb.palm.com solution id 887 lists the instructions to do so.
    Post relates to: Centro (Sprint)

  • Snow Leopard Mac OS X 10.6  Address book entries disappeared in upgradin toox x 10.6.  Can I restore, retrieve the old entries?

    I upgraded to snow leopard, mac os x 10.6.  All entries in my Address Book disappeared. How do I retrieve or restore them?

    Go to the Apple Store and have them install Snow Leopard if that's what you had on the old drive. If you did not have Snow Leopard then you need to purchase a copy:
    If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay

  • Ultra 320 SCSI card with Snow Leopard Server?

    First off, sorry if this is the wrong place for a thread on Snow Leopard server.
    I have an older Intel Xserve (xserve1,1) with the Apple-branded Ultra320 SCSI PCI-X card. This isn't a third-party card, this is the one from the Apple Store.
    So, are these confirmed to continue to work under 10.6? My server runs 10.4 (I'm skipping 10.5).
    Thanks!

    Hi
    A Beta version is exactly just that. No-one apart from Apple knows for certain what the release version will support. Installing a Beta version of anything on a Production Server would not be a good idea in my view. Although one could risk it if a fully working bootable clone of the current Server was done first prior to installing the Beta (or an update for that matter). Perhaps it's just my cautious nature but I personally would not risk it.
    I've been part of the AppleSeed program for 10.6 Server and Client from the outset and am testing both on my laptop.
    Tony

  • Final Cut Express Problem with Snow Leopard

    When I export my movie from Final Cut Express using Quicktime Conversion settings it is taking up to 10 times as long to export than prior to upgrading to Snow Leopard. I have FCE 4.0.1. Mac OS is 10.6.2. This is the only problem I am having but it's a huge one. I use an external hard drive as the scratch disk with FCE.
    Going back and doing a complete clean install of Snow Leopard is not an option. I have too many other programs that would have to be re-installed and no time for all that.
    I have removed and re-installed FCE as someone suggested. No difference. FCE works find until export time. I use it for short on location video clips and need fast turnaround.
    The movie eventually exports and the exported movie is fine. It's just taking forever. Did not have this problem on previous Mac OS.
    I can edit the same video in iMovie and export in a fraction of the time but would prefer to use FCE since it has more options.
    I would be grateful for any suggestions.

    chuckz33 wrote:
    Frame Rate to 8000
    Frame rate is fixed to 29.97 ot 25 in FCE. What do you plan with 8000 frames/second?
    HD1920X1080 is a frame size, what is the CODEC used (like H.264,MPEG2, QT animation, etc)?
    Michel Boisssonneault

  • Latest EyeTV doesn't work with remote after installing latest candelair, 1.20 no option in preferences to activate snow leopard?

    After upgrading to Snow Leopard my mac remote no longer works with EyeTV. Have checked EyeTV is the latest version, have also installed the latest Candelair which other users have advised needs to have snow leopard activated in the preferences but on my version there is no mention of this in the preferences pane.
    Just lists...
    Driver version 1.20 installed
    The remote control infrared receiver is enabled
    This computer only works with the remote with ID 27 (after I paired it)
    Issues with your remote?
    Can anyone advise?
    Thanks

    So, I figured it out myself. Way back in time I had set up some ipfw rules that I had completely forgotten about, which included this:
    01000 allow ip from 192.168.0.0/16 to me dst-port 5900 in
    Since I switched to the AEBS, of course the IP range changed to 10.0.1.x, so ipfw was blocking it. Problem solved.
    Now I just need to figure out why my AEBS keeps crashing..

Maybe you are looking for