Att vs. verizon and what are the termination charges for switching

What are the early termination fees?  I have a total of 5 lines 2 are out of contract 3 will be out of contract june 2015.  AT&T has offered me unlimited txt talk and 30 gb of shared data as well as 5 new iphone 6's for a grand total of $205 a month!!! plyus tax of course and that price is locked in no contract either.  i may have to switch carriers my bill now is almost 300 a month with only 2 iphones and 3 basic phones.  just dont know what those termination fees would be.

asheldon6 wrote:
What are the early termination fees?  I have a total of 5 lines 2 are out of contract 3 will be out of contract june 2015.  AT&T has offered me unlimited txt talk and 30 gb of shared data as well as 5 new iphone 6's for a grand total of $205 a month!!! plyus tax of course and that price is locked in no contract either.  i may have to switch carriers my bill now is almost 300 a month with only 2 iphones and 3 basic phones.  just dont know what those termination fees would be.
Assuming the 3 line are smartphones the ETF would be $600 total. Basic phones would be $300.  An sorry you were lied to by at&t. That's price is not taking into account the cost of the phones.
30 GB $130
5 Line $15 each=$75
total $205
However you also have to pay for the phones. Assuming the cheapest iPhone 6 and assuming you chose the 24 month payment plan that's another $135 a month. So $340 total. And you'll have to pay the sales tax on those phones upfront or on your first bill. What the sales tax on $3250 in your area?

Similar Messages

  • Does the sprint unlocked iPhone works in Pakistan and what are the charges etc.

    Does the sprint unlocked iPhone works in Pakistan and what are the charges etc.

    Verizon iPhone 4S SIM UNLOCK Tutorial
    SGMD1 Oct 19, 2011 9:40 PM  
    Currently Being Moderated
    Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
    1. Meet the following requirements:
    * Must be a Verizon Wireless customer.
    * The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
    * The line of service must be active at least 60 days.
    * The line of service must be in good standing for the past 60 days.
    * Only one SIM Unlock per line every 10 months.
    If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
    2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
    3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
    4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
    5. Enjoy your new unlocked iPhone 4S!
    ****ALSO I JUST SPOKE WITH NICHOLE (VZN GLOBAL SUPPORT) REGARDING IF THE IPHONE 4S HAS TO BE ACTIVE AFTER SIM UNLOCK AND THE ANSWER IS: NO!

  • I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.

    I got a text message which had a link attached to it, i did click on the link, basically some job scam but on the link. Now i just want to find out if my phone has been compromised in anyway and what are the tell tell signs.

    your phone has not been compromised.  There have been no viruses, worms or trojan horses ever reported.

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

    What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
    Please help me out.
    thanks,
    sapsdnhelp

    Hi,
    Check this:-------
    Urgent: Relevant Master Data Data Sources for FI-GL  & FI-AP
    http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
    Regards,
    Suman
    Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

  • What are the classes used for bropdownListBox in BSP and purpose and how

    what are the classes used for bropdownListBox in BSP and purpose and how
    thank you,
    Regards.
    Jagrut BharatKumar Shukla

    Benje001,
    Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
    If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
    Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
    Hope that helps!
    Regards,
    Shannon R.
    Applications Engineer
    National Instruments

  • What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

    Hi Folks,
    Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
    Thank you.

    In case you don't have access to MOS :
    JBOSS : 5.1.2 EAP
    JDK : 1.6.0_38
    ORACLE :
    Oracle Exadata5
    Oracle 10gR2 (10.2.0.3)
    Oracle 10gR2 RAC (10.2.0.3)
    Oracle 11gR2 (11.2.0.2.0)
    Oracle 11gR2 RAC (11.2.0.2.0)

  • What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

    Hi All,
    What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
    Client Type
    Port range  and Protocol required for Audio
    Port range and Protocol required for
    Video
    Port range and Protocol required for
    A/Vconferencing
    Windows Desktop   Client
    Windows mobile App
    Iphone
    Ipad
    Andriod phone
    Andriod Tablet
    MAC desktop client
    Please advise. Many Thanks.

    Out of the box, 1024-65535 for all of the client ports.  :) 
    https://technet.microsoft.com/en-us/library/gg398833.aspx
    You'll want to tune your client ports a bit
    https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings.  I'm not sure the mobile clients respect that setting.
    Elan's got the best writeup for Windows clients here:
    http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
    However, the marking of the packets is the tricky part.  Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings.  You have to do it based on ports
    as the traffic could be peer to peer.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • What are the optimal values for mac and arp timeout values

    Hi Guys.
    What are the best values for "mac address-table aging-time" and "arp timeout" by following scenarios?:
    - single sg300-10 as layer3-switch with a maximum of 10 local (direct connected) hosts
    - and a 3750x-stack with 100 local hosts + hsrp with a other stack of the same sort
    or for asa 5520 as internet gateway for 500 clients?
    I use at the moment a mac aging-time from 300 seconds and a arp timeout from 3600 seconds.
    Is this o.k.?
    Thanks.

    Marvel.
    As far as enhancing the CLI, it will of course be enhanced when new firmware releases provide new features. As far as making it more IOS-like, best to my knowledge, no.  The only other supported CLI on the SB switches are on the SX500 series and SX200E series which the CLI are all consistent. If you bought a SX500 series the commands are nearly identical minus the different feature sets.
    -Tom
    Please mark answered for helpful posts

  • What are the table names for CRM and APO?

    hi friends,
    what are the table names for CRM and APO?
    Regards
    suneel.

    hi Suneel,
    check in crm forum
    Re: SAP-CRM Tables
    BUT051 BP Relationship: Contact Person Relationship
    Similar to BUT050 , additionally contains Contact Person’s Address data
    BUT0BK Business Partner: Bank Data & Details
    BP Number, Bank Key, Bank Country Key, Bank Account Number
    BNKA Bank Master Data
    BUT100 BP: Roles
    ADR2 Telephone Numbers (Business Address Services)
    ADR6 SMTP Numbers (Business Address Services)
    Contains Email – Id of the BP.
    ADRC Addresses (Business Address Services)
    BP’s Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
    TSAD3T Table containing the Title text against a Title No.
    COMM_PRODUCT Master Table for Product
    CRMM_BUAG Master table for Business Agreement
    CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
    Note:
    1. It doesn’t store the Business Partner
    responsible for the transaction. To
    get the Partner No, link it with
    CRM_ORDER_INDEX.
    2. This table can be used for search
    based on the Object Id(Business
    Transaction No).
    CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
    CRMC_PROC_TYPE Master table Business Transaction Type
    CRMC_PARTNER_FCT Definition of Partner Functions
    SCPRIOT Priorities for Activities with priority text.
    CRMC_PROC_TYPE_T Text for a transaction type
    CRMC_ACT_OBJ_T Objective Number and Text for Activities
    TJ30T All the status code and text
    CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
    IBIB : Installed Base/Ibase
    IBIN : Installed Base Components
    COMM_PRODUCT : Products
    CRMC_T077D : customer account groups
    CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
    CRMD_ORDERADM_H Business Transactions CRM
    CRMD_ACTIVITY_H Activity
    CRMD_OPPORT_H Opportunity
    BUTOO : Customer details
    BUT001 BP: General data II
    BUT100 BP: Roles
    BUT150 BP relationship: Attribute table (test
    different
    BUT_HIER_TREE Business Partner Group Hierarchy
    CDBC_T_PRODUCTID Mapping: Product Id
    CDBD_ORGMAN Business transaction - organizational unit -
    set
    COMC_PRODUCT General Product Settings
    COMC_R3_FIELDS Assignment of R/3 material master fields to
    CFOP
    COMM_CATEGORY Category
    COMM_CFGMAT Basic Data for Materials
    COMM_HIERARCHY Category Hierarchy
    COMP_TYPES Hierarchy Tool: Comparison Type Check
    Table
    CRMC_CPRICPROC Customer Pricing Procedures
    SMOKVBEZ15 Assignment employees to positions
    CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
    CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
    SMOFSUBTAB : Mapping & Parameters
    SMOFDSTAT : Download Monitor (R4AM1)
    SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
    SMOFOBJECT Definition of Objects for Download
    SMOFOBJPAR Parent Objects of an Object in Table
    SMOFPARSFA Middleware Parameter
    SMOFQFIND Queue Finder Table for MW-Queue finder
    SMOFTABLES Definition of Tables for Download

  • Freight Material why it is required and what are the configuration?

    Hi experts,
    My clientsu2019 requirement is they want freight material to be configured in DIEN material type? I want to know why they want this and what are the steps to configure it apart from material master
    Plz need your help
    Thanks
    Krushna

    Hi experts Please need your help

  • Can I interrupt a migration from Mac Book Pro to Imac and what are the consequences

    can I interrupt a migration from Mac Book Pro to iMac and what are the consequences

    Les:
    Here are some options:
    • You could copy the data file to your laptop, work on it, and update the file on the iMac when you are back.
    • You can use an application like Log Me In to access your home computer from your laptop.
    • You can use DropBox. Install it on both computers, place your data file in a folder on the iMac, access it and work on it on your laptop and it will be automatically updated on your computer at home, even if it is not turned on, as soon as it is connected to the internet.
    Please do post back with further questions or comments.
    cornelius

  • My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger. I tried all troubleshooting steps suggested by Apple but it doesn't work. What could be the problem and what are the solutions?

    My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?

    We can't know if there's a "fixture" because we can't examine your phone.  But Apple can.  Make a Genius Bar appointment and get your phone evaluated.

  • RAID: What is it and what are the benefits and How to Setup?

    I was wondering what RAID is? How do you set it up? And what are the benefits of having dual hard drives setup in RAID?
    I have a powermac G5 (quad 2.5ghz/16gb RAM/80gb SSD & 1tb HD) and I want to setup my SSD and HD in RAID...would that be wise? Thanks guys!

    Hi-
    One of the best ways to reduce a RAIDs performance is to mix drives.
    Mixing dissimilar drive types should be a shortcut to disaster.
    I would rethink the drives to use for a RAID.
    The most reliable RAID will be from RAID certified hard drives of the same make and capacity.
    After that, you get into software RAID vs Hardware RAID, which both have drawbacks, the latter being price due to the required controller cards and external housing needed for all the drives.
    Hardware RAID will allow for better performance, and allow for use of a RAID 5 or RAID 6 to build in redundancy to protect in case of a drive failure within the set, without losing the entire set.
    A SSD RAID can really offer some blistering speeds.
    I think possibly a bit much for a G5.
    With software RAID, a two drive RAID 0 as scratch for video or graphics work can greatly increase render performance of those respective softwares.
    A two drive boot RAID 0 with 2 WD Velociraptors can increase OS X responsiveness.
    All two drive RAIDs suffer from the need for a robust backup, making a third and fourth drive needed to create a RAID 0+1.

  • When is the new macbook air coming..?? and what are the probable updates, both software and hardware..??

    When is the new macbook air coming..??
    and what are the probable updates in both softwares and hardware..??

    SubmissionsStay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:Speculations or rumors about unannounced products.
    You'll want to ask this question elsewhere. "Management" on these boards don't want these topics.

Maybe you are looking for

  • How to bring files from time machine (ext drive) to another mac?

    Getting another Mac and need to install specific files from a Time Machine Backup of another Mac. Has anyone done this without Time Machine doing a full restore on the new Mac? I'd like to bring over items such as: preferences, Mail files, Safari boo

  • Monthly G/L account

    Hi all I need to prepare a customized Financial Statement report which contain monthly figure for every g/l account. I tried using BKPF and BSEG with two select and loop statement. however I cant get all amount (dmbtr) for particular period. This is

  • Getting error message when trying to gowmload from...

    Error message : this phone is already registered for unlimited subscription

  • Liquid photogallery

    Hi All Just trying to get my head around Liquid in particular for the module_photogallery. I wanted to create a better photo gallery than the current one in BC. One where i can create a custom layout instead of relying on the default table gallery vi

  • Add new rows in datagrid flex 4?

    need to insert some values of sliders, positions to datagrid in flex 4. Then i'll save those values in MySql. All the values are overwriting on the first row of datagrid, how to insert new rows? I tried addItemAt() but did not work. databaseData.addI