Attach a screen shot

Hi,
How can I attach a screen shot with my question in this forum?
Thanks

Hi Jason,
Below is the URL that I get after uploading
!http://i48.tinypic.com/4k7apy.jpg!
But I want to attach the screen shot with my message (not as a link) like you did when you answer one of my questions.
Any way if you can see my screen shot, my real question is to how I can set the company target (which is a red line at 10%) in the line graph.
I did not see any column in my data base or in the BMM layer that correspond to this value.
Is there a way to remove this line from the graph?
I will appreciate your help.
Thanks

Similar Messages

Attaching Docs (Screen-Shots) on SDN - Bhanu

Hey Bhanu/All,
I just saw bhanu attached one Screen-shot on SDN in the below thread:
Periods Vaule question (Actual & YTD)
Curious to know how to add files on SDN to dispaly it to all?
KJ!!!

usage of Graphical Content in forum post?
Merry Christmas and happy holidays to you all as well...hey promise me that you won't be online and replying to questions

How to attach image, screen shot or excel table to master vendor copy.

Hi,
Please let me know how to attach an image or excel table into "header text" table. This has to be printed and sent to the customer. We use SAP GUI to create purchase orders.
Thanks in advance.
Kushal

Past the code into the post and then click on the post preview tab to check to see if the image rendered...it should show, if not, then either the code wasn't copied properly or the wrong embedding code was used.
That will provide a link to the image in separate browser window or tab. But if you place a "!" (an exclamation mark) at either end of the link (with no spaces or quotation marks), the image will then be displayed inline, within your post.

How to take Screen shot in ABAP ?

Dear all ,
I have come across the situtaion as follows :
a) Will want to open the file from the desktop
b) Take the screen shot of that open file
c) Close the file
d) Then want to attach that screen shot in the PDF
e) In the similar way i will do for 4 files and then finally incorpate all these into one PDF and want to send mail .
Is this possible in ABAP .
I am stucked in this situation i open the file then the control is not there in my ABAP program after opening the file .
Secondly there is no FCODE available for the Print screen key so not able to take screen shot .
Could anyone suggest me how to proceed for this situation further .
rgds
Aryan

>
krupa jani wrote:
> http://camstudio.org/
Were you able to read----->>>>>>>
I want through ABAP programming .

Mail is changing the size of my screen shots

I work remotely, and so I rely a lot on snapping screen shots (via Shift-command-4) of what I'm seeing, then attaching them to emails, to communicate with colleagues and students. I've recently been made aware, however, that my screen shots are coming through too small to be read.
What seems to happen is this:
- I snap a screen shot of some portion of my screen.
- If I preview this file using the spacebar, or double click on it to open it in Preview, it opens at 100% of the original size.
- If I attach the screen shot to a mail message, first it gets pasted in as an in-line image (annoying) at a small percentage of the original. Then if the recipient double clicks on it, it opens (in Preview if they have a Mac)... at the same scaled-down size as the in-line image from the mail.
- Attempting to increase the size of this image simply results in a pixelated mess.
This is true even if I go to an item in my "Sent" folder and open the image I've attached to a message.
Help!

I am having the same problem as Shelia all of a sudden. This is only recently. I take a lot of screen shots to use in many different ways, sometimes to attach to email, sometimes just for my own reference. What is going on??? Why are my screen shots all of a sudden coming out teensy?

How can i use this color for my Application Background ?? Screen Shot Attached

Hi ,
I can find only plain colors on to Color Picker , but this is line mixed color
How can use this attached Color for my Applications Background Color .
Please find the Screen Shot attached .
please see the background color

Are you trying to apply a gradient background?
In Flex 3 in Application tag:
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
backgroundColor="#666666"
backgroundGradientColors="[#333333, #666666]">
</mx:Application>
In Flex 4 you need to set the backgroundColor and apply a skin for the gradient:
-------------- mySkins/MyAppSkin.mxml -------------
<?xml version="1.0" encoding="utf-8"?>

<s:Skin xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:mx="library://ns.adobe.com/flex/mx"
        xmlns:s="library://ns.adobe.com/flex/spark">
<fx:Metadata>
    [HostComponent("spark.components.Application")]
</fx:Metadata>
<s:states>
    <s:State name="normal" />
    <s:State name="disabled" />
</s:states>

<s:Rect id="backgroundRect" left="0" right="0" top="0" bottom="0">
    <s:fill>
      <s:LinearGradient rotation="90">
        <s:entries>
          <s:GradientEntry color="0x333333" ratio="0" alpha="1"/>
          <s:GradientEntry color="0x666666" ratio=".66" alpha="1"/>
        </s:entries>
      </s:LinearGradient>
    </s:fill>
</s:Rect>
<s:Group id="contentGroup" left="10" right="10" top="10" bottom="10">
    <s:layout>
      <s:VerticalLayout/>
    </s:layout>
</s:Group>
</s:Skin>
-------------- test.mxml -------------
<?xml version="1.0"?>

<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx"
               height="100%" width="100%">
<s:SkinnableContainer skinClass="mySkins.MyAppSkin"
    width="100%" height="100%"/>
</s:Application>
If this post answers your question or helps, please mark it as such. Thanks!
http://www.chikaradev.com
Adobe Flex Development and Support Services

How to show image in a Transperent form ?? screen shots attached

Hi
Help me in making Images appearing as Transperent . Screen shots attached
I am having a TextInput and a Search Button (The Functionality is that user can enter something in this TextInput and makes a Search Operation by pressing Search Button .)
At the Initail screen display i need to show Some Image in transperent Inside this TextInput , when Mouse is focused on this TextInput , the Image will be completely Invisible .
Now the question i want to ask is , how to show image in a Transperent form ??
Please find the screen shots attached with this Thread .

Thanks for specifying the alpha property of an Image .

Will it feasable to use Module in this case :screen shot attached

Hi ,
We are developing a Application which provides several facilities like Forum , Remote User , --- etc screen shot attached for this reference .
Please tell me will it feasable to develop each of this service as a Module ??
Please tell me shall we go for seperate Modules or for Seperate Components , what will be feasable
Please share your experience

Anybody please tell me if its better to go using Modules Approach , in case if they were part of the Application itself .
Thanks.

How to attach screen shot in OTN ?

Dear Friend,
How to attach screen shot in OTN.
Thanks

Upload the image somewhere else and link to it.

How to attach screen shot in sdn

Hi
how to attach screen shot in sdn
how to attach attachments
in sdn i am unable to see
screenshots could u give me about that
Regards
sahithi

hi,
first take one image and put under
yourworkspace\yourProjectFolder\src\mimes\Components\com.sap.tc.webdynpro.projectname.ProjectName
Example:
i took an Image : sample.jpg
My Application Name is: Certificatoin
so put under,
myworkspace\certification\src\mimes\Components\com.sap.tc.webdynpro.certification.Certification
Now you included your Image to Server Path, i.e during Deployment, image is automatically loaded into Server.
From Webdynpro Application, we have one UI Element called Image, In that we have one property called src i.e Source
give your Image name with file extension
eg:
src: sample.JPG or sample.jpg
extension is very Important, then only you can able to see your Image, also extension is case sensitive so you should take care of that.
In the place of Image you just consider your screen shot........
reply your commands....... bye

Blink Text continously in a Container , screen shot Attached .

Hi ,
Please tell me if is it possible to blink some Text continously in a Container ..
Attached is the screen shot , please advise me some solution .

Hi Kiran,
Check out the link below:
http://onflash.org/ted/2006/06/flex-extensibility-blink-for-flex.php
There is sample flex app included ...download the source and run the application.
I have also tested its working...
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

I uninstalled and reinstalled but at the end of installation there were erros. See attached screen shot. I now cannot open the application. error code 10810 comes up when I try to open.

I could not update photoshop CS6 and Jeff from forum advised unistalling and reinstalling (Tk93580659). Mac OSX. In real trouble, as suggested I uninstalled and reinstalled but at the end of installation there were errors. See attached screen shot. Now I cannot open the application. Error code 10810 comes up when I try to open (see 2nd screenshot). Please help. I have now lost photoshop altogether whereas previous at least I still could use it but could not update. Thank you for any help to instal successfully. Dr Koh

Still looking for a solution to specific installation errors (see screeshot) referring to "Language Pack installation failure":
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB: Install failed
Unfortunately previous advice of using CCS cleaner tool, and suggestions from links for 1) "exit code 6 and 7" and 2) "Troubleshoot instal logs" did not work at all. So I am desparate to fix this because I have spent a lot of money purchasing Photoshop CS6 but have no functioning program. Surely Adobe can help solve this problem with installing, or else it means a lot of money spent on Photoshop CS6 for nothing. I am appealing directly to Adobe to help because I have come to the end of my options. I thank the forum for their suggestions but so far the solution for this specific "Language Pack installation failure" problem is missing. Thank you.
Dr Koh

Video Import from Camstudio is Blurry, Source Vid is not (Screen Shot Attached)

So I made a video with Camstudio. It looks pretty snazzy. It looses a little quality, as you can see. However, in Premiere is turns into a Blurry (and flickery) mess.
I've adjusted the Sequence settings every which way, and even pulled the video into the "new" option to have the sequence created based on the video settings. What am I missing? Why does it look so terrible???

Hey! Actually, that was the first thing I watched the morning! This isn't actually based off of your settings, that's because the gradients on the phone and the menus looked very pixelated, even in the source video. These settings are at a much higher frame per second, but keep the integreity of the gradients in the source video, and actually even after import.
I need a "best of both worlds" kind of solution.
Edited to add
Message was edited by: eraezay. Added a Screen Shot to show the source video and the same screen in Adobe. This is using the Tutorial Settings for Capture and Sequence.

I have Adobe X1 ver 11.0.7 installed on my iMac, when I download a .pdf and try to print it the printer preview is blank, only way is to take screen shots, is this me or an Adobe issue?

On my iMac OS-X 10.9.3 I am able to view a downloaded .pdf in my browser , if however I want to print out the .pdf via the File tab and Print in Safari, the message comes up that Adobe either does not support this format, or it s corrupted as an attachment to an email. I have tried saving it to my desktop by exporting it as a .pdf, or saving it to the desktop. In both cases when I try to open it, I get the same message.
Found that the only way I can save the data is to take a screen shot to my desktop and then I can print it out, but cripes what a pain!
Any suggestions would be welcome, is this me or an Adobe issue?

If you are printing to physical printer from Safari : Use Reader print button from Reader toolbar
If you want to save a PDF from Safari to your local : Use Reader Save button from the Reader toolbar.
PS: if you have PDF in read mode the hover the mouse at the bottom of the page and the floating Reader toolbar will appear.
Please let me know if this solves your issue.

"screen shot can't be saved" and other permissions issues

After having my iMac at the Apple Store for four days solving a problem with "quit unexpectedly" issues with all Apple built-in Apps on OS X Yosemite, I got the machine back with those problems solved. It involved re-installing OS X and restore files from backup. I thought all was well; the Genius Bar dude showed me that it's fixed. He said it took so long because of bizarre permissions issues he'd never seen before.
Now that I've lugged this 40lb machine back home (after verifying the fixes in the store) I now find that several (other) functions don't work. When I try to do a screenshot, I get this message:"Your screen shot can't be saved. You don't have permission to save this file in the location where screen shots are stored." Message could have been more helpful; the "location" is the desktop. Pretty descriptive, though. Seems I can't save anything to the desktop.
I tried creatng a folder on the desktop. Got this message: "Finder wants to make changes. Type your password to allow this". Type password and new folder appears. Drag the new folder to the trash, get same message..
I tried copying a file from a network drive to the desktop. I get this dialog: "Modifying Desktop requires and administrator name and password. I clicked "authenticate" and after a 3 minute delay (with "Preparing.." ) I get this dialog; "Finder wants to make changes. Type your password to allow this". I type the password and the file appeared on the desktop. Before the work at the Apple Store, this never happened. BTW I have only one user account and it's marked "Allow user to administer this computer". Thinking something might be goofy with the pw, I changed it (took 3 minutes to do, oddly) and rebooted. No joy. Same thing happens when I try to drag something from the desktop to the trash. Long time "moving" message followed by having to provide and admin pw.
I tried to save a Safari attachment to the Downloads folder and got this message: "Safari could not download the file xxxxx because there is not enough free disk space". Since I have more than 600GB of available space, I think the message is wrong and that it's really a permission issue with the Downloads folder.
Tried to reset the password again. Click to unlock the Users & Groups panel, get "System Preferences is trying to unlock Users & Groups preferences. Type your password to allow this".
All this tells me that somehow Yosemite is in "nag" mode (reminiscent of Windows Vista.
Any ideas?
Chaz

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Attach a screen shot

Similar Messages

Maybe you are looking for