"Attach Code" is now available!

The long missing "Attach Code" button is now available in the
"Reply" screen of the forum.
This will help a lot when posting code examples.
Tracy

Duh, show them what it looks like :P (haven't seen it
myself...)
Edit: Next up-> The push for syntax highlighting :P

Similar Messages

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Hello Kewal,
Thank you for the details of the issue you are experiencing when trying to perform an update. I recommend trying to update using iTunes, and as always, it is a good idea to make a backup first.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thank you for using Apple Support Communities.
Best,
Sheila M.

Nwrfc 0.0.4 (Ruby wrapper for NWRFC SDK using Ruby-FFI) now available

Please note that version 0.0.4 of nwrfc is now available. There have been numerous changes since the last announcement:
Basic server functionality
Comprehensive type support (except for new float types)
Metadata retrieval functionality for data containers
Activating/deactivating parameters for RFC calls
Please see https://github.com/mydoghasworms/nwrfc for the complete change log. The latest gem has been pushed to rubygems.org so you can update/install with ease.

Hi Ned,
I've just tested your library. It took me a while to understand how to do it, as I never used SWIG before.
Anyway this is what I did:
0. setup a NI USB-6008 with some AA battery connected to AI0 (see attached photo)
1. installed Cygwin (I work on Win2000)
2. setup .paths in the "vimrc" file.
3. run "make -f Makefile.swig "
4. run "ruby test.rb"
It worked, but didn't show correct values. I changed settings inside the file, but still wrong numbers.
I then tried to run other examples and I couldn't run them (I guess the fault is on my side in ruby).
However I managed to run acquireNscans.rb , and it worked perfect.
It took me quite long time today to do. I tried to compile it without installing cygwin, then I compiled it in cygwin, but SWIG seems to be out-of-date, etc.etc. but at the end of the day I've got some results.
$ ruby acquireNscans.rb
[1.38554652487558, 1.37531881852636, 1.37531881852636, ...
read 10, total time: 0.907, rate: 11.0253583241455
Aborted (core dumped)
Is there any forum/topic where others discuss issues or work on the code similar to yours ?
What I am interested in is a library that would allow me to use Ruby or Php to communicate with devices through GPIB, Ethernet , serial port, etc.
Cheers,
Jakub
Message Edited by jcz on 02-15-2008 03:31 PM
Attachments:
DSC017791.png ‏360 KB

Extensibility Pack 3.6 for Agile PLM for Process 6.1.1.1 is now available

Extensibility Pack 3.6 for Agile PLM for Process 6.1.1.1 is now on Oracle Software Delivery Cloud
We are pleased to announce the General Availability of Agile PLM for Process Extensibility Pack 3.6 as of October 30th, 2013.
Extensibility Pack 3.6 provides two new technical enablement features:
Email Extensibility
Customizing the content of workflow emails in GSM and SCRM without custom code is now easier with the addition of a new set of placeholder variables, conditional variables, and other capabilities. These variables are available by deploying a new set of plugins, which can be configured through the CustomPluginExtensions.xml file.
Some examples of the new functionality include:
Displaying new data in the emails, such as the workflow Comment, Cross Reference numbers, Category/Sub-category/Group, a trade specification’s GTIN, a material specification’s Ingredient Statement, etc.
Providing meaningful related specification information in Signature Document emails.
Conditionally displaying data, such as only including a material specification’s classification if it is an Approved status.
User Interface Extensibility
Clients wishing to customize specific User Interface behavior, such as marking certain fields as read only, or applying formatting to show required fields, will be able to do this using the User Interface Extensions feature. Clients can write simple Javascript code which then gets pulled into the desired user interface pages. The Javascript code can leverage useful new Javascript variables and functions that make it easier to perform user interface manipulation, as well as access specific data from the given item (e.g., the specification’s status, the user’s groups, etc).
Watch the introductory video on the User Collaboration site for a high level overview.
More information on these new features can be found in the Extensibility Guide, along with detailed technical documentation.

Hello dirk and Kyle203,
I have PCI 8532 devicenet card in my system, the test unit has devicent implemented in it,
to verify devicenet is working or not we check whether we can read Devicenet vendor id, I have downoaded the latest driver NI-IndComDNET2.1-Beta1.
Thanks for the new update. I developed a VI which is very similar to GetIdentityAttrs VI which is in Example.
Port opens fine, but I cannot see connection being established.I always get the error Error -1074388991 occurred at Get DeviceNet Attribute.vi
I know connections are proper and the Device MAC ID and speed too. Pls throw some light.'
Attached is the VI and error image
Thanks
Attachments:
devicenet.vi ‏18 KB
devicenet error.JPG ‏32 KB

Sun Java 3D looking glass now available - Package ?

Hi,
justread the following:
https://lg3d-core.dev.java.net/lg3ddevelopersguide.html
Project Looking Glass Open Source
Sun Microsystems is contributing Project Looking Glass, based on Java(tm) technology, to the open source community. Project Looking Glass is an exploration project to bring innovative 3D features to the desktop environment. The desktop interface will offer an intuitive, new 3D environment to interact with desktop applications featuring window transparency, rotation, zoom, multiple desktop workspaces and miniaturization.Project Looking Glass offers a platform to realize far richer and more entertaining user experience for existing and new applications in 2D or 3D. The technology enables developers to build highly visual 3D desktops and applications that will run on Linux systems such as Sun's Java Desktop System. The Solaris(tm) environment will be supported in near future.
What does this mean to you?
If you're a software developer, please go to http://enews.sun.com/CTServlet?id=63058 … 8531213971 and download this early version of the code and join the community in developing the 3D desktop.
Interested in using the Project Looking Glass? The project is in very early stages and a commercial version is not available yet. Please go to http://enews.sun.com/CTServlet?id=63058 … 8531213990 to keep up to date on our progress.
Why Open Source?
Project Looking Glass is in its infancy, and we'd like to explore lots of ideas and possibilities. We're releasing the Project Looking Glass code to the whole community to explore every aspect of the technology rather than restricting access to a privileged few. We believe this open development is an excellent model to pursue this exciting and vast opportunity. So, your involvement is eagerly anticipated. We believe new dimension of developer innovation by making Sun's cutting edge technology available at Sun's 3D Desktop Technology Open Source Project on java.net.
We have been working for several months on cleaning the software up, providing basic features and functionality key to 3D window management. A key focus was looking at the existing 2D desktop applications, ensuring minimal compatibility and performance problems. The next step is to look what else we can do to foster real world 3D interactivity. We decided to open source this at a very early stage to ensure that we got good feedback from the community.
What's in the Open Source Project?
The following features are now available in the Project Looking Glass open source release:
3D Window Manager Platform - Java 3D based highly scalable 3D platform with client-server model support.
3D Window Manager and Application Development API - Java API to develop new 3D desktop applications and 3D desktop Window Manager features.
Native Application Integration Module - Allows developers to run conventional X11 applications in the 3D environment.
Sample 3D Window Manager - provides a simple sample implementation for testing and demonstration purposes
3D Environment Lite - Enables developers to run a simplified 3D environment as an application on a Java 3D enabled platform including Linux and Solaris environments. This serves as a development tool to test implementations.
This is all available at: http://enews.sun.com/CTServlet?id=63058 … 8531213971
What's the licensing model?
There are three license choices for developers interested in creating applications using Project Looking Glass.
For developers who are interested in reviewing, revising, and redistributing the source code as part of their own application, Project Looking Glass has been submitted as an Open Source project on java.net under the GNU Public License, or GPL.
For developers who are interested in developing an application on top of the existing Project Looking Glass platform without reviewing and/or altering the code base, there is a binary version of the current state of the project available for download under a traditional Binary Code License. This is also available on java.net.
Finally, for developers or organizations interested in other uses or revising the source code but wish to keep their implementation and related application proprietary, please contact Sun at [email protected].
Project Looking Glass Community Meeting
Wednesday June 30, 2004
4:30pm to 6:00pm
The Argent Hotel, City Room
San Francisco, California, USA
http://www.argenthotel.com/location.htm
4:00-4:30 Registration
4:30-4:45 Welcome, Introductions, and 3D Desktop Project Demo
4:45-5:30 Technology Overview, Possible Sub Projects, How to Get Started
5:30-6:00 Q&A and Networking
Please join the conversation with the Project Looking Glass developers from Sun Microsystems. This meeting will be technically focused introducing developers to the project and letting them know how to get involved.
You can meet the team from "Project Looking Glass" and other developers while enjoying food and refreshments. There is open admission. You do not need a JavaOne Conference Pass to attend.
There will be no webcast available, but we will post the information available at the meeting on the website. We'll also have several presentations and Project Looking Glass at JavaOne, and we'll post as many as we can on the web.
You can see Hideya Kawahara on stage with Jonathan Schwartz and Scott McNealy of Sun Microsystems demonstrating the Project Looking Glass technology and announcing the open source project at http://enews.sun.com/CTServlet?id=63058 … 8531214001 (select View Webcast).
If you have any questions, please send them to: [email protected]
Sun's Project Looking Glass Team
To use our one-click unsubscribe facility, select the following URL:
http://subscriptions.sun.com/unsubscrib … 1002686649

Hi i found something like suns..loking glasses....
METISSE
http://insitu.lri.fr/~chapuis/metisse/index.html
PKGBUILD:
pkgname=metisse
pkgver=0.3.1
pkgrel=1
pkgdesc="A real 3D-Desktop"
url=""
license="GPL"
depends=('xfree86' 'nucleo')
source=(http://insitu.lri.fr/~chapuis/software/metisse/metisse-0.3.1.tar.bz2)
build() {
cd $startdir/src/$pkgname-$pkgver
./configure --prefix=/usr
make || return 1
make prefix=$startdir/pkg/usr install
PKGBUILD of nucleo
pkgname=nucleo
pkgver=0.1
pkgrel=1
pkgdesc="Nucleo library (needed by metisse)"
url=""
license="GPL"
depends=('xfree86')
source=(http://insitu.lri.fr/~chapuis/software/metisse/nucleo-0.1-20040705.tar.bz2)
build() {
cd $startdir/src/$pkgname-$pkgver
./configure --prefix=/usr
make || return 1
make prefix=$startdir/pkg/usr install
btw. you need gcc 3.4 not 3.4.1
and if metisse don´t want to compile ..like
ametista.cxx: In function `int main(int, char**)':
ametista.cxx:88: error: array bound forbidden after parenthesized type-id
ametista.cxx:88: note: try removing the parentheses around the type-id
make: *** [ametista.o] Error 1"
you should patch the file src/metisse-0.3.1/FvwmAmetista/main/ametista.cxx:88
before: char **user_arg char **user_argv = new (char *) [user_argc] ;
after : char **user_argv = new char * [user_argc] ;
sorry but i dont know howto create patch files ...feel free to make a patch
hoppe you find this software as funny as i do
mattux

Crystal Reports for Eclipse 2.0 - Service Pack 1 - is Now Available!

Service Pack 1 for Crystal Reports for Eclipse 2.0 is now available!
Readme file listing the fixes is here:
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4ev2_readme.pdf]
Kirby Leong in another post listed the download URLs, which I'll copy here:
CR4E Runtime Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/crjava-runtime_12.2.202.zip]
CR4E Manual Install Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e_2.0.1.zip]
CR4E All-In-One Package
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e-all-in-one-win_2.0.1.zip]
CR4E Language Packs
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls1_2.0.1.zip]
[http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/cr4e.nls2_2.0.1.zip]
If you wish to use the Eclipse IDE Software Updater:
1. Start Eclipse 3.4.1 (Gemini) IDE.
2. Select Help -> Software Updates...
3. Select the "Available Software" tab.
4. Click the "Manage Sites..." button.
5. If you do not see the following URL listed:
http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/update_site/
    then click "Add..." and add it.
6. Select the above URL in the "Available Software Sites", then click "OK".
7. The Available Software should now list the above URL. Open the node, and you should see "Crystal Reports for Eclipse".
8. Check all checkboxes for "Crystal Reports for Eclipse", and "Install..."
After successful update, you'll see version 2.0.1 listed in Help -> About Eclipse SDK and clicking on the "Crystal Reports for Eclipse" icon (blue swoosh with green diamond).
If you don't see that version listed, here's some troubleshooting tips:
Open a web browser, and Go to the following URL:
http://downloads.businessobjects.com/akdlm/crystalreportsforeclipse/2_0/update_site/site.xml
You should get back a XML file listed the current CR4E plugin and language packs versions. If you get an error instead, it may be because (1) you're in a locked down environment that won't let you access that site, or (2) the CR4E Update Site may be down for maintenance.   If the former, you'll have to download the updates by some other means and upgrade manually.

hello ....
my report is ''crystal report 11'' => "OLE DB" => "Add Command(select * from table) " .
code(JRC) : eclipse + crystal report for eclipse version 2 => "cr4e-all-in-one-win_2.0.1.zip"
<%@ page contentType="text/html; charset=UTF-8"
import="
com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
java.sql.Connection,
java.sql.DriverManager,
java.sql.ResultSet,
java.sql.SQLException,
java.sql.Statement" %>
<%
try {
     String reportName = "report.rpt";
     ReportClientDocument clientDoc = new ReportClientDocument();
     clientDoc.open(reportName, 0);
     String tableAlias = "Command";
     clientDoc.getDatabaseController().setDataSource(
               myResult("SELECT * FROM table"),
               tableAlias,"resultsetTable");
     CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
     crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
     crystalReportPageViewer.processHttpRequest(
               request,
               response,
               application,
               null);
} catch (ReportSDKExceptionBase e) {
     e.printStackTrace();
    out.println(e);
%>
I simplified the code, *myResult("SELECT * FROM table") * is absolutely no problem ,
and this code is absolutely no problem in the "crystal report for eclipse "version 1
but in version 2 run error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: 無法預期的資料庫連線器錯誤---- Error code:-2147467259 Error code name:failed
Please help me and tell me why....

When I open an email's attachment from Outlook, the email's attachment is no longer avail to open on my iPad and iPhone

When opening an email's attachment in Outlook 2007, that email's attachment is no longer available to view on my iPhone and iPad.
How do I correct this to keep the attachment available on iPad and iPhone, when the email's attachment is initially opened from Microsoft Outlook please??

If you're talking about an old iCloud ID, you have to delete the old account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

PlayBook OS v2.0.1.668 now available

PlayBook OS v2.0.1.668 now available from your PlayBook at Options > Software Update.
The update varies for users from 315-319MB in size. It's recommended that you connect to a power source during the upgrade (so your battery doesn't go dead halfway through).
Please post your findings.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Thanks for the update
Regards,
Nick
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

New version of the LabHSM Toolkit for Complex Event-Driven Development is Now Available!

A new version of the unique toolkit is now available for download. As announced earlier, LabHSM makes it possible to easily create and then maintain complex event-driven applications in LabVIEW as a collection of HSM-driven active object VIs using a higher level of abstraction and agile software development methodologies. These active object VIs are created based on a universal Hierarchical State Machine ( HSM or statechart ) template. Therefore, all your code looks similar regardless of its functionality!
So, what’s new in version 1.1?
• "No hands" block diagram modifications! Version 1.1 actually creates, renames, and removes actions on the block diagram as you define, rename, and remove them in the editor! (No, it can't fill in all the details for you, but it can do some, if you think ahead, by replicating similar actions.)
• Two new screens, Events Usage and Actions Usage, (available in licensed copies only) clearly show where (in which state(s)/transition(s)) and how (is it an entry action, exit action or event handling action?) a particular event or action is used. Moreover, if after selecting an instance on the list, the Go To button is pressed, it makes the main screen jump to respective location in the HSM structure. In the case of Actions Usage screen, the respective action is also displayed on the block diagram. Thus, these screens provide two more different cross-sections of the HSM data set and two additional ways to navigate it – now along the Actions and Events dimensions too instead of just the state tree in the first version.
• Version 1.1 can duplicate events or actions, which helps when you've got several that are similar. Changes in the events and actions lists are reflected immediately on the main screen and on the block diagram (which solves the previous problem of deleting a renamed event or action when it's still in use).
• The Events and Actions List Editors are no longer modal and neither are the Events and Actions Usage screens, so you can have all the panels and the block diagram visible and move freely among them as you build your HSM (a good argument for an even larger monitor).
• When you save an HSM file, version 1.1 automatically adds the .hsm extension if you leave it out and it remembers the last directory you used.
• The Loaded VIs utility now can open and close block diagrams (if they are not protected with a password) and display only VIs with modal front panels, if desired—useful for quickly finding and closing accidentally opened (e.g., from the hierarchy window) modal VIs. Make a modal version of this utility and keep it on the Desktop for this purpose.
• A new example of a simple hierarchical state machine and two more excellent tutorials from Paul F. Sullivan (SULLutions.com) are included into the package. The tutorials are also available online. The overview article has also been extended.
As before, the LabHSM toolkit is available for UNLIMITED PERIOD trial. Please visit http://www.labhsm.com for details and download. The site also contains references which you may want to check to learn more about hierarchical state machines and active object computing.
Stanislav Rumega
NI Certified LabVIEW Developer
H View Labs
http://www.labhsm.com
[email protected]
US Toll-Free Phone/Fax: 877-570-8684

I am not really sure if Azure support this but its worth to make your configuration file to support .NET 4.0
$PShome\PowerShell_ISE.CONFIG and $PSHOME\PowerShell.exe.config will be not existing.
So you can make an entry in configuration to support .NET framework 4.0
like shown below
$config_text = @"
<?xml version="1.0"?>
<configuration>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0.30319"/>
<supportedRuntime version="v2.0.50727"/>
</startup>
</configuration>
$config_text| Out-File $pshome\powershell.exe.config
$config_text| Out-File $pshome\powershell_ise.exe.config
Close PowerShell Console and open as administrator.
Try loading the modules back and let me know.
Regards Chen V [MCTS SharePoint 2010]

Nokia 5800 V40.0.005 now available in South Africa

Just found out that V 40.0.005 is now available for South African Phones (0575950). On my way to download it now - - - Such a long wait!!!
Nokia 5800 XpressMusic Red V52.0.007
Hit the Kudos if I helped!

brennbar67 wrote:
i also noticed some problem on this new firmware version V40.0.005.
Problem:
1) It having difficulty to power up the phone... once it powering up, it will auto shut it down itself. I gotta retries many times only able to power up my phone. For old firmware, I didnt see this kind of problem
2) when the phone is fully charging, the LCD backlight UNABLE to turn OFF itself. I tried to charging my phone overnight, and when i wake up the next day morning, I can see the LCD backlight still turning ON.. this is something wrong here. For old firmware, I didnt encounter this problem before.
Nokia, please fix this bugs...
thanks!
WE ARE DOOMED! Looks like Nokia does not think the problem we faced is a firmware bug!
I have email their customer support on this issue and this is the reply I got from them:
SR# 1-10867639480
Dear Mr. Wang,
Thank you for emailing Nokia Careline.
In response to your inquiry, you can first reboot the phone by turning it off and removing the battery. Wait for around 5 minutes before returning the battery and turning it on. Another option will be to restore the settings by going to Menu > Settings and Phone > Phone mgmt. > Factory settings > Lock Code (default is 12345).
Alternatively, we suggest for you to make a backup of all important information.
Kindly refer at the link below for an online guide:
http://www.nokia.com.my/get-support-and-software/download-software/nokia-pc-suites/how-to/backup-and...#
Once done, you can format the phone.To format the Nokia 5800 Xpress Music, kindly dial the command *#7370# in idle mode > Lock Code (default is 12345).
You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
Kind regards,
XXX XXX X.
Nokia Careline
WHAT SHOULD WE DO NOW???!

Announcement : New SPS Patch Release (v 6.0.3) Now Available

A newer release of Service Provisioning System (version 6.0.3) is now available for download on sunsolve
The Release Notes for this release are available here and is a good place to start.
{color:#0000ff}*You are strongly encouraged to go through the Release Notes AND the README instructions of all the patches thoroughly before starting your patch installations.*{color}
The following are the key changes that were incorporated in this release.
1) A fix in the SPS transport layer code was implemented to provide performance optimization of deployment jobs over a raw, SSH or SSL connection. Specifically, customers using an SSL connection between MS and the RA/LD nodes can observe noticeable performance improvements while deploying large payloads.
2) A fix was also added to correct the default database encoding for customers who want to use extended ASCII character sets. This would not only facilitate clean database migration between 5.2 to 6.0 of any UTF-8 characters, but also ensure data integrity on fresh 6.0 installation. It's strongly recommended that customers take necessary steps to apply this fix on their SPS 6.0 installations.
3) Certain GUI related bugs were fixed and some missing functionality was added back.
4) It is to be noted that this is a cumulative patch on top of the earlier patch release version 6.0.2. Hence all the bug fixes that were delivered with the 6.0.2 patch are also accumulated into the 6.0.3 patch
5) Response time of GUI login validation has been improved.

another option would be to make either the n1sps export not writing explicit end tags
<element />
instead of
<element></element>
or
making the import / schema a bit less sensitive about whitespace within elements. The current bug, that you cannot export the xml, reformat in netBeans and then re-import is extremely annoying.

Pipeline Newsletter Now Available - July Issue

The July Issue of the Pipeline Newsletter is now available in a new format with much more contint. Click below to view the newsletter:
http://www.revealnet.com/newsletter-v2/newsletter_0701.htm
INSIDE THE JULY ISSUE:
ORACLE TECHNOLOGY
- "Oracle 9i PL/SQL New Features", by Sandeepan Banerjee, Oracle Corp.
- Free Scripts: "Identifying Tables with High Water Marks", by John Dixon
- "Diving into the Shared Pool, Part 1", by Michael R. Ault
- "PL/SQL Best Practices: Unit Test Your Code", by Steven Feuerstein
- "Using the DBMS_REVEALNET Package", by Michael R. Ault
- Oracle DBA Tip of the Month: "Using DECODE in the Order By Clause"
- Oracle PL/SQL Tip of the Month: "Loading a Lookup Table Into Memory"
- Discussion of the Month: "Migrating from Oracle 8.1.5 to 8.1.7"
- RevealNet Receives "5-Star" product review on www.orafaq.com
- Oracle 9i Tech Expo Announced on July 24, Herndon, Virginia
DB2 TECHNOLOGY
- "Managing DB2 UDB Growth", by Jim Wankowski, Quest Software
- DB2 Tip of the Month: "SQLCODE Error Checking", by Lee Hayden
SQL SERVER TECHNOLOGY
- "Database Coding Conventions,Best Practices", by Narayana Vyas Kondreddi
- Tip of the Month: Passing an Array of Values to a Stored Procedure", Neil Pike
MANAGEMENT
- The TenStep Project Management Process", by Tom Mochal
HUMOR: "Poor Employee Interviews"
The Pipeline Newsletter is a free monthly electonic newsletter published by RevealNet. It is an extension of RevealNet's Pipeline Communities for Database Professionals. Join the Pipelines today! http://www.revealnet.com/Pipelines/pipelines.htm
Best wishes,
Cam White
RevealNet, Inc.

hey, just wondering if the Product Inventory Control per Attributes is going to schedule? I have a new client about to launch their website, with e-commerce section to come in August, but might hold off if this feature will be ready in September? Do you have a more definite ETA?
Thanks,

Bundle Patch1 is now available for Solaris (SPARC), Solaris (x86-64), AIX

[OTN |http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html?origref=http://www.oracle.com/technetwork/oem/grid-control/index.html] Hi All,
EM Binaries updated with bundle patch1 are now available on OTN
OMS and Management Agents for platform ::: Solaris (SPARC), Solaris (x86-64), and IBM AIX (64-bit)
Management Agents for platform::: HP-UX, or HP-UX Itanium
The BP1 workbook is updated with various use-cases specific to these platform. We strongly recommend you to follow the instruction from the workbook to apply BP1 patches. If you have any doubts feel free to drop me an email.
http://docs.oracle.com/cd/E24628_01/doc.121/e35229/toc.htm
Regards
Akanksha

Oracle Instant Client was a "feature" introduced with Oracle 10g. There is no 9i version.
Code that links with Oracle 9i libraries should be able to be linked with Instant Client 10gR2.
The resulting application will be able to connect to databases from Oracle 8.1 onwards.

Kodo 3.4.0 now available

Hi,
Kodo 3.4.0 is available now! Get your copy at
http://solarmetric.com/kodo/releases/3.4.0
* Query cache now caches aggregates and projections, including queries
that use grouping
* Added support for savepoints, with both in-memory and JDBC3 plugins.
* Added support for Oracle Object fields through JDBC SQLData interfaces.
* Improved thread and socket support for TCP RemoteCommitProvider
* Better support for large transactions, including several optimizations
in the datastore cache when using large transactions
* Improvements to reverse mapping
* Improvements to unicode support for Oracle
* Improvements to performance of attaching of object graphs
* Improvements to exception handling and reporting
* Tangosol plugin supports query cache
* Added a new ManagedRuntime for improved integration with BEA WebLogic
Server. It is automatically used when using WLS.
See http://docs.solarmetric.com/relnotes.html for full release notes.
Enjoy,
-Patrick

Stephane & Alex-
Kodo 4.0.0 ships with the final JDO 2.0 jars, but it is not yet a
complete JDO 2 implementation.
We do still intend to complete JDO 2 compliance in the near future, but
as of 4.0.0, Kodo is still officially a JDO 1 product.
Stephane Bouchet wrote:
Another question :
Is the final release will be compliant with the last (and final) JDO 2.0 API ?
It seems it is not the case for the current release.
Cheers,
St?phane
Alex Roytman a ?crit :
Hi Mark,
Is any work done on JDO side of the product? If I am not mistaken the list
of outstanding JDO issues has not changed for quite a while. Are you
planning to release the product without addressing them?
Thank you
Alex
"Marc Prud'hommeaux" <[email protected]> wrote in message
news:[email protected]..
All,
Kodo 4.0.0 RC 3 is now available. This release candidate of Kodo 4
implements the JDO and EJB 3 Persistence specifications. You are
invited to download it at:
http://www.solarmetric.com/Software/beta/4.0.0RC/
You can find the release notes at:
http://solarmetric.com/Software/Documentation/4.0.0RC3/docs/full/html/relnotes.html
The full documentation can be found in the distribution, and also at:
http://solarmetric.com/Software/Documentation/4.0.0RC3/docs/full/html/index.html
Please report any issues that you find to the Kodo beta newsgroup
(bea.kodo.beta).
Good luck, and enjoy!
Marc Prud'hommeaux
BEA, Inc.

GroupWise Mobility Service 2.0 now available

We're pleased to announce that Novell GroupWise Mobility Service 2.0 is
now available. This release, which replaces the former Novell Data
Synchronizer Mobility Pack, includes the following enhancements:
Performance and scalability improvements, and support for more than
1,000 devices per server
ActiveSync 12.1 protocol support
Mobility Service Monitoring Dashboard, showing real-time stats for the
overall system, for each sync agent, and for particular users and
mobile devices
Task synchronization
New address book administration options
Support for the upcoming version of GroupWise, releasing as GroupWise
2014 and code-named Windermere, including Active Directory support
through GroupWise provisioning
Support for the latest mobile device platforms like iOS7, Android 4.3,
Windows 8 and BlackBerry 10
Support for SUSE Linux Enterprise Server 11 SP3
AutoDiscover support for iOS and Windows 8 devices
And much more
Novell GroupWise and Novell Open Workgroup Suite customers with current
maintenance are entitled to this release which is available for
download here.
https://download.novell.com/Download...d=xWnnbrV7Xic~
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

Joseph,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

"Attach Code" is now available!

Similar Messages

Maybe you are looking for