Attach employee photo to KMContent

We would like to attach employee photo to KMContent for storage via ESS/MSS or R3. Is there any document on how to do it ?
Thanks.
Edward Tso

Hi Subhash,
I can use OAC0 to link with SAP Content Server. But I don't know how to link withh KM Content. Pls advise.
Thanks.
Edward Tso

Similar Messages

  • ESS Personal Profile - Employee photo show as 'x'

    Dear experts
    I'm trying to find a conf. table the difference between Dev & QA to display employee photo in ESS personal profile.
    An image like hide photo (Not a actual employee photo) is display in Dev portal where as it show 'X' in QA. I'm trying to find the conf. table to show like hide in QA rather than 'x'. Attached the screenshot of two environment. Highly appreciate your input
    Thanks
    Babu

    run the report RPTMC_INDEX_EE_PIC_URL_TO_INDX  once
    EHP6 MSS Photo Issue
    EHP6 MSS Photo Issue
    1677344 - Poor performance when reading the photo URLs   ------ kindly do as per the steps  mentioned in this note
    1618938
    chk in  se11 > T77TMCPIC_URLS > click on display and do as below ...Activate Content server in SICF once and repeat .....can you check in  t-code ----CSADMIN  ......content repository a2 is runnning or not in overview chk once
    next click on below button and log off and log -in and refresh the team view in portal

  • Email attachment​s (photos)

    I'm vacationing in Costa Rica and Windows email outgoing messages are blocked so I must go to this Verizon server to send emails. I'm not able to attach single photos. Everything seems fine..the arrow just spins for about two minutes and then I get the following message:   " Please check your network settings and try again".   Photo does not attach.
    What can I do to fix this?
    Also any suggestions on how to use Window's email to send?

    Sorry to hear about the problems you are having with email attachment. If you are not on a Verizon connection, you can not use outlook with the standard POP settings. You must use the webmail. I have sent you a private message
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Employee Photos

    Hello experts,
    I want to upload the employee photos in SAP B1 v8,8.
    I was wondering if there is a preferred or suggested picture type (JPG, bitmap) and what size is suggested for the image?
    Any comments?
    Looking forward to your reply,
    Kind regards

    Pam,
    You could attach any size pictures with any format but I always suggest our b1 customer to use jpeg or png files that use small size.
    The main important things to know is that the picture is store in the path you have defined in the general settings and not in the B1 table. So, the more biggest size will increase  the harddisk space.
    JimM

  • Need to upload employee photos against infotype 0002

    Hi,
    We have an urgent reqirement to load the photos of all the employees agianst the infotype 0002 which need to be accesed by the employees and managers via enterprise portal.
    Can anybody help me....
    Thanks in advance
    Krishna

    The steps provided you are very appropiate , but you can also check the following settings incase you dnt achieve your requirements.
    Q. How to attached the Photo in IT0002
    1.Create a number range for SAP Archive Link :
    IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain number ranges.
    Tcode OANR. Create range 01 from 0000000001 to 9999999999 without the external number flag.
    2.Document type HRICOLFOTO must exist with document class JPG.
    IMG>Basis Components>Basis Services>SAP Archive Link>System Settings>Maintain document types.
    Table TOAVE, Tcode OAC2.
    3.Document type HRICOLFOTO must be linked to object type PREL and IT0002.
    IMG>Personnel Management>Personnel Administration>Tools>Optical Archiving>Set up Optical Archiving in HR.
    View V_T585O, no Tcode. In all three columns there ara minuses, don’t put a flag in the check box.
    4.Check which content repository (Archive) is linked to document type HRICOLFOTO and object type PREL.
    IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain Links.
    Table TOAOM_C, Tcode OAC3
    5.Create this content repository with storage type FILE archive.
    IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain content repositories.
    Tcode OAC0
    Storage type FILE archive can be attained by clicking on the field Storage type and clicking somewhere else in the screen with the right mouse button. Choose Possible entries and only then you get a list of all values. FILE Archive is entry number 08. Choose Version no. 0031 and Archive path something (e.g. C:\).
    6.Link photo to personnel number.
    Menu>Tools>Business Documents>Miscellaneous>Stored Documents. Tcode OAAD.
    Click on the Create button. Business object PREL and Docyment type HRICOLFOTO. Click on create (fill in the right personnel number in the pop up and click Continue). Choose the photo (as a JPG file) from the place where it is saved (e.g. hard disk). SAP will notify that the Stored Document was created succesfully. Photo is visible via PA10, PA20, PA30, PA40. Double-click to magnify photo.
    To delete archived document :
    Tcode OAAD, click Find. In docyment type field select HRICOLFOTO and after execute you get a list of all documents. Select appropriate document and click on delete icon.
    thnkx
    bhanu

  • TS3899 I have a new IPad and am trying to send a new email from my contact list with photos attached.  No success.  I can reply to an email ok.  But cannot attach a photo from my pictures.

    I cannot send an email from my contact list and attach a photo from my pictures.  I can reply to emails I have in my inbox BUT i cannot find where I would attach a picture there.

    Since you are a new iPad user .....
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Calling infotype 0002 in ALV  report for showing employee photo

    Hi all,
    The requirment from business side is a report in which employees personal data shuold be shown with employee photo, I had tried for employee photo in ALV report but it didnt sucessed, then I went for other solution like calling transaction in ALV report.
    In this case I am calling Infotype 0002 but the issue is that the transaction PA20 is coming with PERNR but I am not able to go directlly to infotype which shows employee Photo,please suggest any solution.
    Thaks.
    JAY

    Hi Jay,
    It is possible. Please refer the syntax for the CALL TRANSACTION
    CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
                        | [USING bdc_tab [bdc_options]] }.
    You can do a recording till the required page comes & call the transaction accordingly. Hope, you are aware about the same.
    For example, I just had a solution to go to the roles tab in the user profile and I did as below:
        CLEAR wa_bdcdata.
        wa_bdcdata-program  = 'SAPLSUU5'.
        wa_bdcdata-dynpro   = '0050'.
        wa_bdcdata-dynbegin = k_ok.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'BDC_CURSOR'.
        wa_bdcdata-fval   = 'USR02-BNAME'.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'USR02-BNAME'.
        wa_bdcdata-fval   = g_value.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'BDC_OKCODE'.
        wa_bdcdata-fval   = 'SHOW'.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-program  = 'SAPLSUU5'.
        wa_bdcdata-dynpro   = '0100'.
        wa_bdcdata-dynbegin = k_ok.
        APPEND wa_bdcdata TO it_bdcdata.
        CLEAR wa_bdcdata.
        wa_bdcdata-fnam  = 'BDC_OKCODE'.
        wa_bdcdata-fval   = '=ACTG'.
        APPEND wa_bdcdata TO it_bdcdata.
        g_opt-dismode = 'E'.
        g_opt-defsize = k_ok.
    *** if user click on the User Name, call SU01
        CALL TRANSACTION 'SU01' USING it_bdcdata
                    OPTIONS FROM g_opt.
    Regards,
    Selva K.

  • I am trying to attach multiple photos to an email from my ipad 2. I can see how to do it from the camera and camera roll option,but not from the photos program. What am I missing? Thanx so much!

    I am trying to attach multiple photos to an email using ipad 2. I can see how to do it using the camera and camera roll ap...
    But not using the photos ap..which is where the photos are. Any help would be appreciated.!

    In an album in Photos touch the Edit button and then touch the desired photos (up to 5). A blue check appears in each selected photo. Next touch the Share button at the upper left and select Mail. This starts a email with the photos attached.

  • How can I attach multiple photos to an e-mail

    I would like to attach multiple photos which are already in the photos file on my ipad to e-mails I am sending from the ipad.  Is there a place in the e-mail where you can attach photos.  The only way I have found to do it is to send from inside the photos file but can only attach one per e-mail.  Any suggestions?

    You must email the photos from within the photos app.
    You can select up to 5 photos to email at a time. While you are in thumbnail view in the photos app - tap the arrow icon in the uper right corner. Then tap on up to 5 photos in order to select them. Tap the Share button in the upper left corner and then select - email

  • How can I attach multiple photos to an email using IOS 8.1.1

    I am trying to avoid having to attach one photo at a time when emailing a group.

    One option that you have is to go to the Photos App and go to your Camera Roll or where you have the pictures you want to send, then click on the select option at the top right side and select all the pictures you want to email.
    Once you selected everything then click on the share button at the bottom and do the following depending on the number of photos:
    - If you want to send 5 or less then you can select the mail option and this will create a draft with your pictures and then you can just add the address
    - If you  to send more than 5 then you can select copy, then go to the mail app, create a new email, press and hold on the text section and then select paste, all your pictures will be copied and then just add the address you need.
    Hope this helps.

  • How can I attach a photo to an existing email ? (iPhone 4s and I don't know what iPhoto is)

    Someone please help ! I'm a new owner of an iPhone 4s and I need to attach a photo to an existing email, but can't figure out how to do it. I have no idea what iPhoto is and need every step spelled out, in great detail, as I'm still very new at all the wonders of this great phone.
    Thanks in advance,
    Sandy

    There is (to my knowledge) no way to do this with an existing email.  You can create a new email message with a photo attachment from your 'Photos' app though.  Open your photos app, select which photo you want to email, and then click the arrow in the botom left hand corner, and choose 'Mail.

  • How can I attach a photo to an email,using Photoshop Elements9,without going through the Revel cloud

    How can I attach a photo to an email using Photoshop Elements 9, without going through the Adobe Revel cloud?

    Adobe user wrote:
    I'm using Windows 7.  I have no email clients.
    You don't need an Email client nor Adobe Revel account to send email and photos as attachment.  All you need is an email account (could be free web-based account such as Gmail, Outlook, Yahoo, AOL or whatever including from your own ISP.  And of course an Internet Connection.
    Now the most obvious requirement is out of the way so you need to go in to your Organizer and click on Share button and choose Photomail. Select the photo you want to send and follow the instructions that are on your screen.
    You also need to request an Adobe Verification Code to enable you to use Adobe's Mail Servers to send the photos for you.  To do this go to:
    Edit >> Preferences>> Sharing
    Look for something like this and fill out the red boxes where indicated (click on this image to see it clearly).
    Hope this gets you started.

  • How can I attach a photo as a separate file to an email? (I have tried several of the tricks suggested here and they don't work for me)

    I cannot work out how to attach a photo as an attachment to an email.  I have tried several times today using different methods (ie, changing the email to plain text, dragging the photo from Iphoto over the mail icon, emailing directly from Iphoto), but none of them work.  Everything seems to just produce an email with an embedded photo.  Any ideas?

    Is this the first time your friend receives e-mail from a Mac user?
    It is certainly the first time I have sent her emails from a Mac.  Not sure if she has ever received messages from another Mac user before.
    You've sent her e-mails with pictures before, but only now you're having a problem
    Yes, that's correct.
    Mail.app offers two settings you can try to manipulate: Edit > Attachments > Always send Windows-friendly attachments, and, Always insert attachments at end of message
    I had already tried that and it didn't work.
    e-mail client your friend is using
    I will find out on Monday when she goes back to work, but I wanted to look at solving the problem firstly from my end.
    very likely you're dealing with a problem others have dealt with
    Yes, very likely - I searched the site before I posted my own question, and there were quite a number of posts on the same issue.
    Again, thanks everyone for your help.  Hopefully we can find a solution.  I am not making you all grope in the dark just to annoy you!!!  I'm just a new Mac user trying to work something out.  I am sorry if it seemed otherwise.

  • HT201077 How do I move an email attachment to photo stream?

    I have a great photo from my daughter and would like to view it full screen on my iPad.  I understand it has to be added to the Photos app.  It is currently in an email as an attachment.  How to I get this photo from my email attachment to Photos and presumably to Photo Stream?

    Open the email, tap ad hold the image, in the window that opens tap Save Image.

  • Error while uploading employee photo

    i m getting following eror while uploading employee photo through storage server
    Error in HTTP Access : IF HTTP_CLIENT-RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
    Pls reply

    Hi archana
    you have to go with OAC0 tcode here in content repository double click on A5 which is standard one go in details-->clickon fulladministration then in that screen you will be having Basic path and Achive path there basis people  need to give sapgui code.
    they will be have this code in servermanagemt. i am not clear of this code where they can find. but i am sure of that this code will be given by basis people only.  then go with OAOH tcode. give the details as usal and one more thing is that the photo should be save jpeg formate.
    Regards
    Suresh

Maybe you are looking for