Attach printer using ethernet on airport extreme

How do I connect a printer via ethernet to airport extreme?

Airport Express is not a TIme Capsule, only ONE Ethernet port on it
Please read the initial post again. The question was....
How do I connect a printer via ethernet to airport extreme?
As you know, the AirPort Extreme has 3 Ethernet LAN ports, as does the Time Capsule.

Similar Messages

  • I am not able to print to my usb airport extreme attached printer from my windows aptop or window desktop

    I am not able to print to my usb airport extreme attached printer from my windows aptop or window desktop

    Your post did not really provide any details on what you have done in the way of troubleshooting or printer software that you have installed, so we don't have much to go on here.
    For starters though, you will not be able to print unless you have installed Bonjour Print Services for Windows v2.0.2 on the PC(s) and run the program.
    So, if you have not done this, that would be a good first step.

  • I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme  802.11ac Wi-Fi for my wifi?

    I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme  802.11ac Wi-Fi for my wifi?

    You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.

  • Can I use an old Airport Extreme as an extender with a new Airport Express

    Hi All,  I have Verizon Fios and the data line runs into my bedroom.  I purchased a new Airport Express today to replace the Airport Extreme (from 2006).  Can I use the old Airport Extreme as an extender (I'd like to set it up in the basement as I get poor connectivity there).  I tried using the Airport Utility - Other WiFi Devices to find the Airport Extreme, but it's not registering. Is what I'm attempting possible?  If so, how do I set it up?

    Can I use the old Airport Extreme as an extender
    Is this the "round" or "dome" shaped AirPort Extreme?
    If yes, then it is not possible to have the AirPort Extreme wirelessly "extend" the signal from the AirPort Express.
    However, the older AirPort Extreme can probably be set up to provide more wireless signal coverage if it will connect back to the LAN <--> port on the AirPort Express using a permanent, wired Ethernet cable connection.
    In this case, the setup of the older AirPort Extreme will require that you have an older version of AirPort Utility installed on your computer. If it is a Mac, then the Mac must be running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility could be used to set up and configure the older Extreme.
    f you have the "square" or "flat" version of the AirPort Extreme, then everything becomes much easier. Post back if you do.

  • Connecting to Maxtor HD using PC and Airport Extreme

    I am trying to connect to my Maxtor HD from my new PC using my new Airport Extreme. I have the internet and my printer working, but having trouble connecting to the HD. I have updated the Airport sofware, and it recognizes the HD, but I cannot get the computer to connect to it.
    Any advice?

    SMB windows side
    AFP Mac side

  • Can any printer connect to the airport extreme or do i need a special printer?

    can any printer connect to the airport extreme or do i need a special printer?

    There are rare exceptions but any USB printer should be able to use its USB printer port. Only the print function of all-in-one a/k/a "multifunction" devices will work with the USB port though.
    The Extreme will support any networked (wired or wireless) printer or multifunction device.

  • How many devices can I use with an AirPort Extreme Base Station?

    How many devices can I use with an Airport Extreme Base Station? Devices included a mac, iphone, ipad and pc laptops.

    The AirPort Extreme will support up to 50 wireless devices and 200 wired Ethernet devices. I would imagine that this would probably be adequate for most homes.

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • How do i use a 2nd airport extreme both are newer models

    how do i use a 2nd airport extreme both are newer models

    I assume that you mean that you want to extend the range using wireless only.
    This Apple Support Document will tell you exactly how to do that:
    http://support.apple.com/kb/HT4259
    The instructions assume that you have AirPort Utility 5.6 for Mac OS X Lion , so if you have not already done so, you will need to download and install this application to track the instructions in the support document.

  • What os do I need to use the newest Airport Extreme?

    what operating system do I need to use the newest Airport Extreme? I am running on 10.6.8 but I think I need 10.7.5.  Is it worthwhile to go with the latest Mavericks?

    1. You should check if Mavericks is supported on your Mac - OS X Mavericks - Technical Specifications
    2. You can also check AirPort Utility 6.3.1 for Mac. It supports 10.7.5+, 10.8.3+ or 10.9+.
    3. On Windows side AirPort Utility 5.6.1 for Windows . It supports W7+.

  • I presently use an older AirPort Extreme but my reception comes & goes does this occur with the new extreme?

    I presently use an older AirPort Extreme but my reception comes &amp; goes. Does this occur with the newer version?

    1)  If the reception comes and goes as a result of wireless interference from other sources in your home and around the home...other wireless networks in the neighborhood....or...nearby cordless phones.....then a new router is likely to experience the same issues. See this Apple support document for symptoms and fixes of wireless interference.
    http://support.apple.com/kb/HT1365
    2) If the reception comes and goes as a result of an aging power supply in the older AirPort Exteme or another component that is intermittently acting up, then a new router should take care of that.
    What we cannot tell you is whether 1) or 2) applies to your situation.  If possible, it would be good idea to take the older AirPort to an Apple Store or Apple Servicer....if you have one near you....to let them take a look.

  • Epson Stylus r360 issues printing in Leopard via Airport Extreme & Bonjour

    I hope I am not duplicating any posts, have searched but have not found a similar problem.
    I have an Epson Stylus Photo R360 printer connected to my Airport extreme via USB sharing the resource around the house via Bonjour to all my Mac's.
    Problem is it works fine under Tiger but the 2 Mac's that have been upgraded to Leopard 10.5 no longer print. It discovers the printer and loads in the printer configuration window ok, drivers are found and the printer looks good to go.
    However, when you try and print, after about a minute an error appears on the printer in Leopard with an exclamation mark and is unable to continue.
    If you hook up the printer directly to any Mac running leopard, it works fine!
    Anyone else having this problem? Is this something Apple has changed in Bonjour or maybe printer drivers problem via Bonjour?
    Any help or advice would be greatly appreciated.
    Thanks
    G

    I found a fix for the problem of not being able to print from a printer connected to an Airport Extreme.
    I had similar issues with my Canon iP4200, which was connected to an Airport Extreme. Printing worked fine with Tiger, but Leopard has somehow corrupted the feature. Printing is now very sporadic, at best - and will stop a few seconds into the printing and hang. My solution was to hook the printer directly up to the main (host computer). Go into System Preferences > Sharing, and make sure you've selected 'printer sharing'. Then go into the Sys Pref for "Printing/Fax", and remove your current printer (which was accessed via Bonjour on your Extreme) - you can leave it if you like, just make sure that when you add the new one, that you make it the default. Once set, make sure that you check the box labeled 'Share this Printer'. You will also now notice that the printer's location has changed to your host computer's name. You will now be able to print from your main computer without a hitch. Now access the System Pref>Printer/Fax from any other wired or wireless computer on your network. Add a new printer, a new choice will appear on your list, which will list the printer name with the "@" symbol, followed by your host computer's name. Select that, and let it do it's auto driver check, then click 'add'.
    You will now be able to print from any of your computer's on the network. Best of luck.

  • Can I use my 2010 AirPort Extreme as a range extender with a new AirPort Extreme?

    I want to use an existing AirPort Extreme (2010 model) with a new AirPort Extreme to extend the range and signal strength into a shop. They are different designations, one n and the other ac. Are they compatible. I need to know before I buy the new router.

    The new AirPort Extreme will provide an ac,n,g,b compatible wireless signal.
    The existing AirPort Extreme can be configured to extend the n,g,b signal, but it cannot extend the ac signal.

  • Can I use an American Airport Extreme in the UK?

    Hi guys,
    I bought an Airport Extreme in the US sometime ago. I never managed to get it to work and gave up. My Wireless has gone down so I thought I would give it another go. Still can't get it to work.
    Will a USA airport extreme work in UK?
    I have updated firmware to version 7.4.2
    The big issue I think is on the wireless options page I can only select America, Canada or a bunch of South American counties. Do the US have different wifi signals to UK?
    Is there anyway of over writing the firmware with UK firmware?
    Is it not any of the above and maybe I am just setting it up wrong?
    Please help,
    thanks.
    Jamie

    Welcome to the discussions!
    +Will a USA airport extreme work in UK?+
    Yes
    +Do the US have different wifi signals to UK?+
    Yes. UK uses channels 1-13. US uses 1-11. You won't be able to use 12 and 13 on your AirPort Extreme. I'm not sure about 5 GHz channels if you plan to use that frequency.
    +Is there anyway of over writing the firmware with UK firmware?+
    No
    +maybe I am just setting it up wrong?+
    If you can tell us what modem (make and model number) you are using with the AirPort Extreme, we may be able to help with the setup.

  • Can't find printer connected by ethernet through airport extreme.  All I get is a generic error message - I'm using printer IP address as address.

    Old imac using snow leopard printed just fine to Ricoh cl2000n printer that is connected to airport extreme via ethernet (as was the imac). New iMac with Lion otherwise same cable configuration and the computer cannot find the printer.  It searchs and spits out a generic error message.  Any suggestions?  Thanks!

    Is your printer listed?
    http://support.apple.com/kb/HT3669
    If not then you need to get the driver and install it.
    Otherwise you may want to reset the printing system.
    http://support.apple.com/kb/ht1341

Maybe you are looking for