Attached document in PR cannot copied into the PO

hi,
i am creating a purchase order with reference to purchare request. all the item from the pr is copied into the po (eg. description,qty, etc) except the document attached in the pr.
is there anyway this can be configure whereby the attached document in the pr through the service object will also be copied in the purchase order during po creation.?
appreciate all the help. thanks
she

Hi,
If you pasting the texts in Item Texts you will get the same in PO also it will be printed in Po also.
Please check the same.
Regards,
Mohd Ali.

Similar Messages

Return Free Items should copied into the invoice.

Dear All,
We created a return sales order with two line items.First line item is REN and second line item is RENN item category type.When we created the sales order at that time RENN was not billing relevant.(in VOV7).I have made the delivery and did the PGR. Now the client requirement is they want RENN should copied into the invoice.So now i changed in VOV7 for RENN item category and tried to invoice that open Delivery.But the system is still not copying the return free items into the invoice.
So what changes do i neeed to do in return delivery document or return sales order so that free item should reflect in the invoice.
Regards
Debasish

Hi
Can you check the status of the free return item (Renn)in the delivery and run the below report
RVDELSTA
if the above report is not updating then kindly take the help of Abaper to create a program to update the same ,please find the
program below:
TABLES: VBFA.
data: cnt like sy-tabix.
SELECT SINGLE * from vbfa where VBTYP_N = ' ' and vbelv = ' '.
if sy-subrc = 0.
UPDATE vbfa SET PLMIN = ' ' where vbelv = ' ' and vbtyp_n = ''.
endif.
KIndly check the ossnote 445763
Regards
Damu

Cannot copy IGMT: the parameter is incorrect

ok so heres my problem
i have had to recently wipe my whole laptop due to a hefty virus and in doing this i lost all my itunes library but once the restoration of my laptop was complete i proceeded to install i-tunes and use the method where you:
open itunes preferences
go into my computer and copy the music to a destination and then import the folder into itunes to have my collection back
but for some reason half way through copying and pasting it get the error message "cannot copy IGMT: the parameter is incorrect"
and only copies half my collection does anyone know the solution to this problem or a way around it?
much appreciated and thnx in adavnce to any help!

Sounds like that IGMT file is corrupt.
Try copying things over in chunks, and skip that file.
Here's the answer from a different forum:
http://forums.afterdawn.com/thread_view.cfm/344692

Onetime vendor - address is not copied into the purchase order ME21N

Dear all,
I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
So my question is if anybody can propose a solution for this.
Best regards, LB

>
Lars Birk wrote:
> Dear all,
>
> I have a issue about using onetime vendors, if I have entered a dummy address on the onetime vendor, this address is not copied into the prucase order when I create a PO for this vendor type.
> My problem is that we want to use the ME59 to create PO automatically for these onetime vendors but I get the message 06035 - Enter a address on the PO.
> So my question is if anybody can propose a solution for this.
>
>
> Best regards, LB
One time vendor can never hold vendor specific details i.e. vendor details and bank details. You cannot use a one time vendor for ME59, use regular vendor account instead for your requirement or enter the address manually at time of conversion as per the message.
Edited by: Afshad Irani on Jul 13, 2010 1:34 PM

I can open my iTunes and play my purchased music, but I cannot get into the iTunes store. btw, I just downloaded the new version of iTunes

I downloaded the new version of iTunes, and now, I cannot get into the iTunes Store.

many thanks.
I am in my iTunes application and when I press the link to connect to the iTunes Store, it starts churning, and churning, but never connects. It has churned for hours and when I finally click the "X" to close it, I get error code 11222.
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Product Cannot copy from the quotation to contract

Hi all,
I Created Quotation in CRM, using the copying controls i creating the Contract(CRM), the problem is Product is cannot copy into contract from the quotation,
Can any help to solve this issue.
Thanks
Gskumar

> is this IDES version??
>
> Sharif isnt CRM_COPY_BADI used to copy similiar trans
> and not for copy control..??
Hi Rebecca,
Its not an ideas system.
Client Business process is Quotatation & Sales Order are creating in CRM
Contracts are creating in R/3.
To decrease their license cost they wants to create Contracts in CRM,
Issue is : When ever am creating a contract with reffernce to quotation, product is not copying to Contract,
help to solve this issue
pls send u r mail i ll send the screen short wht exactly the probelm
Thanks
Gskumar

I'm trying to copy pics from my pc to Iphone4s and am getting an error message - cannot copy item - the device has either stopped responding or has been disconnected. please tell me what to do to enable me to transfer the pics

i'm trying to copy pics from my pc to Iphone4s and am getting an error message - cannot copy item - the device has either stopped responding or has been disconnected. please tell me what to do to enable me to transfer the pics

Are you syncing the photos using Itunes?
When you plug your phone into your PC, in Itunes under the picture tab you can sync photo and then choose the photos.
Look here more detailed instructions
http://support.apple.com/kb/HT4236

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

HT1414 Hello, do you know what I can do when my Iphone is blocked with the apple appearing ? I cannot enter into the phone and I don't know what to do ? Thank you

Hello,
Do you know what I can do when my Iphone is blocked with the apple appearing ?
I cannot enter into the phone and I don't know what to do ?
Thank you for your help
AMGSO

Basics from the manual are restart, reset, and restore.
Have you tried these?

I cannot get into the app store my apple id is not working

i cannot get into the apple store via i tunes would not allow me to sign in

Its possible the App is not available in the Canadian store if the link doesn't work for you.
https://itunes.apple.com/us/app/xfinity-connect/id320788270?mt=8

HOW to include the needed libraries to be copied into the self-cotained app

I'm using: Netbeans 7.2, JavaFX 2.2, JDK 7u7. First, I believe the instructions posted at http://docs.oracle.com/javafx/2/deployment/self-contained-packaging.htm#A1349508 are off (when dealing with NetBeans, at least), as the resulting bundle copies the dependent libraries (3rd party) to the root where the main .jar file is placed, but the MANIFEST gets JavaFX-Class-Path with the lib/ prefix.
This is what I have added to build.xml in the project's folder:
   <target name="-post-jfx-deploy">
        <fx:deploy verbose="true" nativeBundles="image" outdir="${basedir}/${dist.dir}" outfile="${application.title}">
            <fx:application name="${application.title}" mainClass="${javafx.main.class}"/>
            <fx:resources>
                <fx:fileset dir="${basedir}/${dist.dir}" includes="*.jar"/>
                <fx:fileset dir="${basedir}/${dist.dir}/lib" includes="*.jar"/>
            </fx:resources>
            <fx:info title="${application.title}" vendor="${application.vendor}"/>
        </fx:deploy>
    </target>This is the tree structure of the dist folder after Clean and Build Project has been triggered by NetBeans:
│   JFXA.html
│   JFXA.jar
│   JFXA.jnlp
│
├───lib
│       log4j-1.2.16.jar
│
└───web-files
        dtjava.js
        error.png
        get_java.png
        get_javafx.png
        javafx-chrome.png
        javafx-loading-100x100.gif
        javafx-loading-25x25.gif
        upgrade_java.png
        upgrade_javafx.pngAnd this is the structure of the created bundle (conents of the JRE runtime omitted):
└───JFXA
    │   JFXA.exe
    │   JFXA.ico
    │
    ├───app
    │       JFXA.jar
    │       log4j-1.2.16.jar
    │       package.cfg
    │
    └───runtime
        └───jreProblem is, when I run the application (the *.exe* inside the bundle) it tries to run the main *.jar*, but fails due to the inability to locate compile-time libraries. Apparently, this behavior is due to the MANIFEST of the *.jar* being linked to the folder named lib (defaults), but the build script copies the libraries to the output dir where the actual *.jar* resides (dist). How can I fix this? Thanks.
I think I have ran into the same problem as here: javafxpacker - include libs
Edit*:
Upon .jar extraction and further inspection of the MANIFEST file, I see this:
JavaFX-Class-Path: lib/log4j-1.2.16.jar
Currently, as mentioned above, the libraries end up in the root folder where the main .jar resides, due to:
*<fx:fileset dir="${basedir}/${dist.dir}/lib" includes="*.jar"/>*
So, my question is, what do I need to change in order to get the dependent libraries to be copied into the correct path (with lib prefix), when building a bundle? The *<fx:fileset>* does not seem to support anu attribute that would specify the output path structure..

Use
             <fx:resources>
                <fx:fileset dir="${basedir}/${dist.dir}" includes="*.jar"/>
                <fx:fileset dir="${basedir}/${dist.dir}" includes="lib/*.jar"/>
            </fx:resources>or simply
      <fx:fileset dir="${basedir}/${dist.dir}" includes="**/*.jar"/>Filed http://javafx-jira.kenai.com/browse/RT-24757 to update the docs.
Edited by: igor on Sep 5, 2012 2:23 PM

I cannot log into the game center as I forgot my password and am not able to reset it.

I cannot log into the game center as I forgot my password and am not able to reset it because I keep getting the error that the info I submitted is incorrect. If I ask for an email message, it doesn't come thru but friend requests are received on that same email. If I use my second account, I can't use the same nickname and all my info is lost. Any suggestions?

here
http://support.apple.com/kb/index?page=search&src=support_site.home.search_sugge sted.search&locale=en_US&q=game%20center%20support

HT1174 On the opening screen of my ipad2 the itunes apple icon and the usb cord are displayed. What do I do to delete them? Do not tell ll me to download something, as I cannot get into the ipad

On the opening screen of my 1pad2 the itunes apple icon and usb cord are displayed. How do I delete them? Do NOT tell me to download anything, as I CANNOT GET INTO THE IPAD.

You can't get rid of those icons because that means that you MUST connect the iPad to your computer's iTunes and restore the device. You have no choice. There is no way to remove that from the screen. Something went wrong on the iPad and you need to restore it now.
iTunes: Restoring iOS software

[svn:fx-trunk] 8190: make sure the HaloClassic theme is not copied into the package b/ c it is no longer supported in flex 4

Revision: 8190
Author:   [email protected]
Date:     2009-06-24 12:26:02 -0700 (Wed, 24 Jun 2009)
Log Message:
make sure the HaloClassic theme is not copied into the package b/c it is no longer supported in flex 4
bug: https://bugs.adobe.com/jira/browse/SDK-20729
qa: no
doc:
checkintests: pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-20729
Modified Paths:
    flex/sdk/trunk/build.xml

Gordon, it looks like its been a while since you made this post. Not sure how valid it is now...   I am particularly interested in the LigatureLevel.NONE value. It seems that it is no longer supported.
How do I turn of ligatures in the font rendering?
My flex project involves trying to match the font rendering of Apache's Batik rendering of SVG and ligatures have been turned off in that codebase. Is there any way (even roundabout) to turn ligatures off in flash?
Thanks,
Om

HT4061 In cannot retrive my serial number because i cannot get into the phone

In cannot retrive my serial number because i cannot get into the phone

Please eject the Sim tray and underneath u would see the Serial # as well IMEI #.
Happy New YEAR

Attached document in PR cannot copied into the PO

Similar Messages

Maybe you are looking for