Attached documents lost after upgrade to iCal 4.0.4

Attached documents lost in iCal after upgrade to iCal 4.0.4; I used to scan documents (written invitations etc.) and attach them to the iCal event. Can I restore them or are they lost forever?

I have exactly the same problem. Came to add a scanned letter to an appointment, and found a) there's nowhere to put it and b) my appointments with similar attached files are now file-less. Where are they? Anyone know?

Similar Messages

IWorks documents lost after upgrading to ios8

How can i get my iWorks documents after upgrading to ios8?

Other than the fact that you cannot connect to WiFi, we have no idea what you have tried, so see if something in ether of these support articles helps.
http://www.techradar.com/us/news/phone-and-communications/mobile-phones/ios-8-wi fi-battery-drain-fix-problems-1266599
iOS: Troubleshooting Wi-Fi networks and connections

How can I recover all my MAIL emails lost after upgrading to TIGER?

Hello,
I just bought Mac OSX Tiger today and after upgrading from the previous Mac OSX and after launching Mail, I discovered that all my INBOX emails were LOST!!!
I still have the Draft emails, the Sent emails and Trash but no trace of my 1,425 ancient and precious INBOX emails!
Please help me recover them. I tried lots of ways to get them back but cannot find them. I'd like to also understand what happened.
Thank you!
iBookG4

HI Greta, Did you Clean Install Tiger, or Upgrade from a previous OS? as if the latter, you might find them in the ARchived files.
I upgraded to Tiger in December and it caused problems with mail but I didnt lose the messages. So I am thinking you did a clean install.
Post back with more info please
Imac FP 800Mhz 80gb 256 RAM Mac OS X (10.4.3) 512 extra Ram iLife 04 LaCie 160gb Ext Airport Express 6.1.1
Imac FP 800Mhz 80gb 256 RAM Mac OS X (10.4.3) 512 extra Ram iLife 04 LaCie 160gb Ext Airport Express 6.1.1

GMAIL Lost after upgrade to IOS 8.3

I have lost access to my GMAIL accounts after upgrading to IOS 8.3 !
IOS Settings does not provide me a way to enter a new application password for the account - there is NO PASSWORD box displayed anywhere in the GMAIL configuration. So I tried deleting the account and re-adding it but i get stuck in an endless loop of two-step confirmation and it "appears" to add the account (prompts me for which features - mail, notes, calendar, etc.) but then when all is said and done NO GMAIL ACCOUNT shows up in my list of accounts. WTH?
And trying to navigate Apple's support screens has become an exercise in frustration and futility!
Anyone got any ideas how to fix this mess?

Just wanted to add to this thread. I found out that this might be related to using the iCloud Keychain on iOS and with a computer using Mac OS X. Due to how iCloud Keychain stores all passwords across all synced devices, which can be both iOS devices and Mac OS X computers, the methods for accessing and updating those passwords has changed. Not sure whether this is intentional by Apple or not, but it seems that the ability to update passwords stored in iCloud Keychain is not something you can do through iOS (or at least, I have not been able to find a way to access the keychain and view/update any of the passwords stored there).
If you have a computer set up to use iCloud Keychain, you can use the Keychain.app to view/modify any passwords that are stored there, which "should" update the passwords stored on the iOS device, if that keychain item is actually synced to the iCloud Keychain. (Tested this and confirmed)
The problem appears to arise specifically if you only have one iOS device (or only have iOS devices) using iCloud Keychain. The option to update passwords seems to be missing. Not sure it this is new to 8.3, but this is the first time I have run into this problem, and cannot seem to find any reports detailing this problem anywhere else. In fact, to a greater degree, most articles/sites that discuss the iCloud Keychain only refer to the usernames and passwords stored by Safari, which are not the only passwords and information stored by the iCloud Keychain. This issue being a prime example.
I did notice that when re-adding my gmail account using my iPhone, the login page was actually just a webkit presentation of the gmail login page (webkit being the underpinnings of Safari, used for displaying HTML, but not actually the full app or Safari), which is where I entered my username and password, which I am assuming is now stored in my iCloud Keychain. I even checked in Settings>Safari>Passwords&Autofill>Saved Passwords, and my gmail username and password are NOT listed there, so iCloud Keychain is storing some items somewhere else, which is not accessible by the end user through the UI.

All data lost after upgrading

I lost all data after upgrading my iPhone 3G to iOS4. I was able to recover only the information that syncs with mobileme, everything else was gone, in all apps: bank accounts, passwords, notes, games, settings, etc -everything
I already restored and restarted, even used time machine, nothing seems to work. Any help?

I am trying to update to the newest software, and get a warning that i need to save/transfer new purchases to my library. I know the last time i did this update i went with continue, and as the others in the posting have indicated lost information. It didnt matter to me at that time, but now that I have more info to lose, i dont want to do it, so the other option on it is to do as it asks. But, I am having a hard time doing that. I have done what they have asked by going to file and transferring, but, it doesnt seem to be working. As i continue to get the same warning. I am not going to update this till i get the answer to do it properly this time. But, want to know why it doesnt want to transfer the info that it requires, for me to continue on. I think this is why the others in the thread are losing their info.

Airport connections lost after upgrade to Snow Leopard

After upgrading to Snow Leopard, I am no longer able to connect to the Internet wirelessly. I have had to resort to connect via wired connection. I have tried to reconfigure the connection. It finds my wireless network, but when I type in my password it says it is not correct. I know it is an issue with Snow Leopard as it worked fine prior to the upgrade and my other devices connect with no problem.

Go into Displays Preferences and, if you haven't already done so previously, put a checkmark in the box for "Show displays in menu bar". Then, click on the resulting icon that shows up in the menu bar to drop the menu and select "Number of Recent Items" and set it to 10. Now drop the menu a second time and see if there are two 1920 x 1080 resolutions. If so, one of them may be the older one previously in use that was working.

Room directory overview lost after upgrade to stack 12

Hi,
after upgrading to stack 12 I can't see the created rooms anymore.
Under collaboration > room directoy I see that there are 5 rooms cause there are 5 lines but the room names I can't see anymore.
Consequently I can't access the rooms anymore.
What's going wrong? Can anybody help me?
Thanks
Susanne

Hi Gilles,
thanks, the note solved a part of the problems.
Now I can see the rooms in the directory and I can create new one. But if I access into an old room I see only empty content and an empty navigation panel.
New created rooms have no problems. Do you have the same
problem?
Also I can't delete the test rooms again.

Boot camp lost after upgrading to Yosemite from mountain lion

I lost my windows7 boot camp after I upgrade to Yosemite from mountain lion. When I press ALT when rebooting there is no more alternative to boot for window anymore. I did read some thread about this but my case is different since when I tried to type 3 steps(diskutil.......etc) as LonerT user answers it did not work. The attached files here are what I faced with. Please help. I have a lot of important files in windows

If you look at the GAP between GPT3 and GPT4 it is start/size of 782929176/37595880 but the NTFS header starts at 782929920 according to your Testdisk output shown here.
MS Data                782929920 976773112 193843193
The difference is 782929920 - 782929176 = 744 bytes. You will need to delete the current GPT4 and recreate a new GPT4. Please stop if you see any error messages and post here.
1. Delete the old entry and create a new entry at GPT#4.
sudo gdisk /dev/disk0
p
d
4
n
4
782929920
976773112
0700
p
w
y
Here is an example of the delete/new...
Command (? for help): d
Partition number (1-4): 4
Command (? for help): n
Partition number (4-128, default 4): 4
First sector (34-1954210086, default = 1454210080) or {+-}size{KMGTP}: 1454211072
Last sector (1454211072-1954210086, default = 1954210086) or {+-}size{KMGTP}: 1954209791
Current type is 'Apple HFS/HFS+'
Hex code or GUID (L to show codes, Enter = AF00): 0700
Changed type of partition to 'Microsoft basic data'
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector)    End (sector) Size       Code Name
   1              40          409639   200.0 MiB   EF00 EFI System Partition
   2          409640      1452940543   692.6 GiB   AF00 Customer
   3      1452940544      1454210079   619.9 MiB   AB00 Recovery HD
   4      1454211072      1954209791   238.4 GiB   0700 Microsoft basic data
2. This is a tedious process and you want to check after the second 'p'rint command that it looks reasonable, before the 'w'rite and 'y'es to confirm.
3. You will need to reboot after the change, because the disk you are booted from is the one being modified. Reboot will rebuild disk0s4 using the start/end you entered.
4. Run the dd command - sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C and check that the first line contains "R.NTFS".
5. Once you have a working GPT#4, a new hybrid MBR needs to be created which will overwrite what you see in your Fdisk output. This is also done using GPT Fdisk (Gdisk). Your numbers will look different than what are in the following example. In most cases, you will use the default except entry 4, which should have a 'y' for bootable flag.
sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk /dev/disk0: 490234752 sectors, 233.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 59BDFEEB-1EB4-4529-94FE-3CBC2C3CD513
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 490234718
Partitions will be aligned on 8-sector boundaries
Total free space is 2604 sectors (1.3 MiB)
Number Start (sector)    End (sector) Size       Code Name
   1              40          409639   200.0 MiB   EF00 EF
   2          409640       401060383   191.0 GiB   AF05 Macintosh HD
   3       401060384       402329919   619.9 MiB   AB00 Re
   4       402331648       490233848   41.9 GiB    0700 Microsoft basic data
Command (? for help): r
Recovery/transformation command (? for help): h
WARNING! Hybrid MBRs are flaky and dangerous! If you decide not to use one,
just hit the Enter key at the below prompt and your MBR partition table will
be untouched.
Type from one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in sequence: 2 3 4
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): y
Creating entry for GPT partition #2 (MBR partition #2)
Enter an MBR hex code (default AF): AF
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #3 (MBR partition #3)
Enter an MBR hex code (default AB): AB
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #4 (MBR partition #4)
Enter an MBR hex code (default 07): 07
Set the bootable flag? (Y/N): y
Recovery/transformation command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/disk0.
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Warning: The kernel may continue to use old or deleted partitions.
You should reboot or remove the drive.
The operation has completed successfully.
6. a. Test 1 - Can you see your Bootcamp volume in Finder.
    b. Test 2 - Can you files in the Bootcamp volume?
    c. Test 3 - Can you see Bootcamp in your System Preferences -> Startup Disk.
    d. Test 4 - If Test 1-3 are successful, select Bootcamp and click on Restart. You may need Windows startup repair, if you see a hanging underline cursor at the top left corner of your screen. In most cases, it is not required.
Here is an example...
Command (? for help): d
Partition number (1-4): 4
Command (? for help): n
Partition number (4-128, default 4): 4
First sector (34-1954210086, default = 1454210080) or {+-}size{KMGTP}: 1454211072
Last sector (1454211072-1954210086, default = 1954210086) or {+-}size{KMGTP}: 1954209791
Current type is 'Apple HFS/HFS+'
Hex code or GUID (L to show codes, Enter = AF00): 0700
Changed type of partition to 'Microsoft basic data'
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector)    End (sector) Size       Code Name
   1              40          409639   200.0 MiB   EF00 EFI System Partition
   2          409640      1452940543   692.6 GiB   AF00 Customer
   3      1452940544      1454210079   619.9 MiB   AB00 Recovery HD
   4      1454211072      1954209791   238.4 GiB   0700 Microsoft basic data

Duplicate Document Numbering after Upgrade

Hi! Can anyone please help me to find-out a resolution for the Duplicate Document Numbering found after the SAP B1 upgrade from 2007 to 8.8?
This report has been found from the Administration -> Utilities.

The previous company database was a trial database, but the production version of the same is showing the following (missing & doubled) List in "Check Document Numbering -> Document Serial Numbering List"
Missing List - 52 rows (a sample from the top is given below) -
Document     Number     To Number
Checks for Payment     1     3931
     3933     6925
     6932     6932
     6963     6963
     7014     7014
and in right had side in the same as above way, the Doubled list - 16 rows
BUT I have check the "Checks for Payment Documents" the documents there shows their "Check Internal ID" 1 to 691. Then from where the above numbers have been detected by the system?
ANOTHER INTERESTING FACT IS THAT THE above testing I have done on SBO 8.8 PL12, hence I have got the "Upgrade Control Report" as well .... and this showing the following "Non-matching quantities" -
#     Table     Records Before     Records After
1     OINM     20284     17342
I have checked the upgrade log-file ... there were no errors. BUT at the time of "Pre-upgrade check" of this company database the warning "common database version differs from the company database version" always.

LR4: tone curve settings lost after upgrade

I've find an annoying bug in this new version that makes me really crazy.
I've a Nikon D300S and a D7000.
After the importation of the catalog in the new Lightroom 4 all the D7000 .dng files have lost all the tone curve settings (I normally use linear).
The D300S files instead retain the tone curve settings.
It's a very strange behaviour: I've lost more than half of my old photo settings.
It's really frustrating.
Will be resolve soon this problem?
Until that day, for my older works I'll be obliged to continue to use LR3.

I've probably found a sort of workaround!
I've made some "organized" tests and here I report my findings.
Using LR3.5, I prepared a "test catalog" using 4 images from 7 different cameras (28 images total): for each of them, I used both the original nef and the dng converted file (56 files in the catalog), all develop process was set to "2010".
The cameras were Nikon D70, D90, D200, D300s, D700, D5000, D7000.
I applied a strong tone curve to each image in a way that the appearance was heavily characterized.
Before exit LR3.5, I SAVED ALL THE METADATA TO THE FILES.
Opening and converting the catalog using LR4, doesn't show any visual change until I zoom in library or open the develop module: both these operation lead to a flat image with the strong tone curve lost.
Curiously, the history retains the original steps but they are ineffective: histogram and tone curve changes according to the visual change but for some camera the "new" tone curve is "medium contrast", for others (D5000, D90) is "linear", for D300s is "custom" (linear with blacks cut at 9.8%, and this explain my initial impression that D300s's curves were untouched, sorry). This last behavior may depend on the fact that I've different default develop settings depending on the camera serial number.
Finally, the update to the 2012 process only minimally changes the visual appearance and surely doesn't restore the lost tone curves.
And here is the UNEXPECTED WORKAROUND: doing a READ METADATA FROM FILES IT RESTORES THE TONE CURVES (and the 2010 process)! Upgrading the process to 2012 minimally changes the visual appearance again but now the strong tone curve is present and evident.

IPod music lost after upgrading to iOS 8.3

I own a 5th generation iPod touch. When I connected to my computer the iTunes prompted me to update to the latest iOS available i.e., 8.3 and I accepted it. In the process it downloaded the software and restarted my iPod but somewhere in that process I got a prompt in iTunes stating a Unknown error occurred. I verified the iPod to see if the device is up and running. It showed the latest OS version 8.3 but to my dismay there were no music albums at all. All the songs which I had in the iPod prior to the upgrade were vanished.
I tried the restore option in iTunes which was backed-up just before the upgrade (automatically by the upgrade process), but looks like it only restores contacts, calendars etc but not the music.
When I connect my iPod to the computer it sometimes shows the space usage as if the music prior to the upgrade is still in the iPod. Even the Songs and other information are still shown in both the iPod & the iTunes. But when I play it will show exclamation mark against that file in iTunes and in iPod it just keeps skipping to the next song and nothing gets played as there are no songs at all.
Please let me know if there is any solution for this weird loss of data from iPod.

First get the songs to play in iTunes on the computer. Re Import CD music to iTunes or redownload iTunes purchases
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Then
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Manage Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Photo stream not showing up on iPhone after upgrade and ical not updating calendar on Mac

I just cross upgraded from 4 to 4s. I have 1000 photos in photo stream from old phone and on Mac - after restoring from backup (done right before the phone switch), I only have 161 photos - its not increasing over time....
Is there any way to push this to the phone?
Also, my calendar is not updating in the cloud with items on the phone.

i have also upgraded my phone to a 4S and have an ipad. I will not upgrade to Lion until the primary software i use is made compatable. just spent 30 min with tech support to learn that because of the icloud, i can no longer upload my photos. i can not turn icloud on my mobile devices without losing totally the syncing of my calendar, contacts, mail to my computer running 10.6.8!! If i do turn the feature on, I must create a new identiy on the mobile devices, that identity would take over my calendar, contacts, mail etc, and not sync with my office computer. i asked multiple times if the new identity could be separate from my primary information and was told multiple times no.
unbelievable!!
i suffered all the growing pains (syn) of mobile me and feel now back in the worst days of Apple with some pretty new hardware
is it possible the tech guy was wrong?

PDF presets are lost after upgrade to CS6 and uninstallation CS4

Since upgrading to CS6 from CS4 and subsequently uninstalling CS4 (and CS3) - as advised by IT - I have lost the presets I had when I export to pdf from Illustrator & Indesign - the drop down menu options of PRESS QUALITY, HIGH QUALITY and SMALLEST FILE SIZE have gone.
I have a back up of CS4's settings but no idea which one I need and what to do with it in order to reinstate these options.
Any ideas?
Thanks so much

You simply would have to copy the presets into the folder:
C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Settings
I'd be careful, though. Overwriting default presets with an older version may cause compatibilty issues.
Mylenium

Music, photos, and apps lost after upgrading on new computer

Someone please help! I just upgraded 3G to 3.1.3 on new computer and lost all my music, photos, and apps. Is there anyway I can get them back. I backed up my phone before the upgrade, the phone was wiped clean, then retored to original settings, then it restored to back up, but I lost all the above in the process. Thanks Sheila

By design, the iPhone syncs iTunes-managed media content (music, videos, apps, photos) with _one and only one_ computer. That content was erased from the phone. The backup won't help - iTunes content is not backed up. You need to sync to the computer you synced to +prior to+ upgrading (the 'old computer'). Or, move your iTunes library, etc., from the old computer to the new computer and sync to that.

My camera folder does not open and all my pictures are lost after upgrading?

after the upgrade and i dont think i am going to use cloud.....i tried to open my camera roll and there are no pictures at all! and now it keeps crashing i click it and it closes right away???? anyone have any ideas?

Hello swordbreaker. Thanks for the response.
The "My Safe" bit seems to be a Toshiba programme written by UPEK as part of the fingerprinting set-up on the Satellite 200. My Safe is an encrypted folder that is sitting on the desktop. The problem I had was that it no longer did anything when I double clicked it. The problem occurred after I went through the Norton de-install and then install routines. (I was trying to install Ghost but it would not install.
Then I found a Norton Protection suite which I never used had been installeed on my U200 when I bought it and I had to deinstall it before Ghost would install.) I think you were correct that Norton was the cause of the problem because it corrupted something in the UPEK programme.
After a little thrashing about I found that I could download the UPEK programme from Toshiba and I did that and re-installed the fingerprint stuff and My Safe then worked. your response did give me the heart to find the answer.
Thanks.
Regards, Robert.

Attached documents lost after upgrade to iCal 4.0.4

Similar Messages

Maybe you are looking for