Attached mixing board with audigy sound card probl

i am using a mixing board with an audigy sound card the porgram im using has 2 channels a and b the music plays only on one port i used to be able to sue up the 2 different songs on 2 volume controls now both songs play in the 2 channels but sound is only controlled by one volume control?it has played properly for over 3 years with no problems until tonight?anyone have any ideas?thanks

Okay, I'm assuming you mean you have a stereo connection to rear Line-out and 2 and that you want both Line-outs to play the same stereo signal. If you are trying for something different, then post additional explanation, and we can go from there. I have not heard of an SB9400 before. You should be able to find the serial number on a white sticker on the card. That would identify the model. I think all Audigies have a Speaker Settings applet. So in Speaker Settings, do you have 4/4. speakers selected? If you have an EAX Console, do you have a CMSS3D option? (It might be called simply CMSS on some Audigies.) If so, select that. If you have a stereo surround option, select that. For the Audigy 2 ZS, for example, CMSS3D stereo surround will route the same stereo signal to Line-out & 2 (and optionally to Line-out 3).
rle68 wrote:
audigy sound card older card sb9400 ? sound about right ?
program is pcdj this is the same sound card we used on an older pc same configuration... it worked fine for about an hour then stopped
it plays fine sound is fine.. just plays out one port on the sound card only i need the second port
o/s win2000
just playing mp3's thru the mixing board out to 4 speakers
everything worked then it stopped....just not sure if its a software setting the older pc was using xp pro
this is a faster pc but i like 2000 better
hope that helps and thanks
Message Edited by Katman on 03-05-20060:20 PM

Similar Messages

Adobe Audition does not work together with Audigy sound cards.

Dear friends, pleasae, help. I use Adobe Audition sound processing program, my sound cars are of the Audigy line. Recording control does not work, a known bug, says Adobe. Play control works fine, but I'd like to make quality recordings. Something is not O.K.with the ASIO system, I figure. The case is the same with PCI as well as PCMCIA Audigy products.
Tell me, please:
-Is there a patch or workaround to fix this problem?
-If not Audigy, what sound cards then?
Getting help from Adobe isn't quite simple, but maybe, Audigy fans know better.
[ordas]

If you mean the recording source/level control in Surround Mixer (etc.) ... it is not working because of it's bypassed by the ASIO driver ... so, it's not a bug but normal behaviour. You just adjust the recording level in Audition (or in any other software). Normally you need to select
- "AnalogMix()" input port option for analog line sources like Line-In, Audio CD, AUX-In, etc.
- (Mix L and Mix R are equal w/ the famous "What U Hear" ...
- S/PDIF for digital input
- etc.. here are some reading on Creative Audigy ASIO matter -
http://forums.creative.com/creativel...essage.id=1726
Remember also set monitoring properly in software so you can hear what you're recording. This is normally set through a tiny 'speaker icon' found in every tracks header ('settings options').
BTW, if you check the "Wave" source channel/slider when running in ASIO mode, you'll find out that it won't work either (it's all the same if you mute it). This is normal behaviour too, even when working in WDM/KS (Kernel streaming mode (or w/ Asio4All (which uses WDM/KS functionality))) ... it's just because of the kmixer is being bypassed ...
jutapa
Message Edited by jutapa on 12-14-200601:07 AM

UNRECONIZED PROBLEM WITH SB AUDIGY SOUND CARD

Hi, you all. Pls help me with this problem of my SB Audigy Platinum (SB0060). In Windows XP or even Windows Vista, they can find out my sound card as an Multimedia new hard ware, but when I install sound card driver from CD (original CD driver) fail to install and a message like this: "we cannot find any support products in this computer, pls make sure that is is plugged in your computer already...". I am very disappointed with this 'cause i really like the quality of this Creative sound source. Pls help me. Thanks a lot! Pls answer me : [color="#000099">[email protected](PS: THIS CD DRIVER COMES WITH THIS SOUND CARD BOX, AND I TRY TO INSTALL A NEW FRESH WINDOWS WITH STANDING ALONE SOUND CARD WITH NO CONFLICT TO OTHER PCI CARD, STILL FAILED)

. A friend of mine who also has this soundcard, claims he has a Decoder tab in his device controls in audiohq.. But I dont?!?

That is quite odd. Your Audio HQ should look like this: http://img23.echo.cx/img23/8494/hqdecode7kl.jpg. If not, then you should uninstall you drivers (using the CTZAPXX.exe app on the CD) and reinstall them.
2. When I choose to calibrate my speakers -> basic, FL, FR, RL, RR, C plays ok BUT after that a low freq sound plays for 3 secs then my SL and SR starts to play a high freq beeps respecti'vely...
The program does the same thing on my old T5400 and my current Cambridge MegaWorks 550. My brother has the Audigy 2 ZS also and his Logitech Z-5300s do it as well. I think the program is funky, not your speakers.
3. Since I want to enjoy DTS, I downloaded Windvd, cofigured it to 8 channels (7.). But the SL and SR wont play anything... So I tried Windvds test and all goes well until it is SL and SR turn, they dont play anything... Almost the same as the speaker calibration app. BUT note that in the Creative THX setup console everything works well...

Go into the Options for your DVD software (this applies to any player, not just WinDVD) and set it to S/PDIF Passthrough. This will send the digital signal to your card, which will see it and decode it. Setting WinDVD to 7. mode will try to have the CPU decode the signal. If it doesn't work with WinDVD, then try using Media Player Classic 6.4.x.x and setting the decoder settings to Digital Passthrough. Note that you need to make sure the that decoders are enabled in the Audio HQ (for which you may need to reinstall your drivers.
Note: DTS-ES supports 6.. Dolby Digital EX supports 7., I think.

Satellite A300 and Win7 - Strange problem with speakers\sound card

Hello everyone,
I am working on a - A300-1MO with win 7 ultimate 32 bit
In the last few days (since I have installed the Bluetooth driver but I dont think it matters), the sound card, and therefore the laptop speakers, switch from being mute to being active, sometimes in high volume.
It disturbs me a lot because my computer is making sounds while I am in classes (from apps running\web sites etc.). I almost got kicked out of class several times because of it.
I tried muting the sound card from the windows mixer and from the sound card application, it's no use.
I will appreciate any help.
Thanks a bunch
Roi.

Hi roibs,
> It disturbs me a lot because my computer is making sounds while I am in classes (from apps running\web sites etc.). I almost got kicked out of class several times because of it.
Maybe you should leave your computer at home and not play with it in your class ;)
Anyway, I would recommend disabling all Windows sounds in control panel. That means no sounds will be played while you navigate through the Internet or use the Explorer.
Check this!!!

People with creative sound card post here.

There had been some report's people with creative sound card has problems on nvidia chipsets or neo motherboards. I just want to know how many has problems and how many don't.
So, people who has problems type 1 at beginning of your post and type 2 if don't have problems then post your spec's
Cpu
Operating System
Motherboard/bios and cell menu settings
Ram/timing
Soundcard/drivers
Videocard/drivers
Powersupply/Amps +3.3v,+5v,12v
========================================================
Amd64 3000+ 9nm
WindowsXP sp1
Neo2 platinum/1.4/htt x4,nvidia/ati speed up disable,cool n quite enable
Ocz 3200 platinum rev2 (2x512)/ 2.2.2.5
Soundblaster Audigy2/ 1.84.50
Tyan 9700pro/4.12
Enermax EG465-ve 431w/+3.3v-38a,+5v-44a,12v-20a

I thought I'd share my most recent visitation of the digital poltergeist that is the Audigy 2 SB024x.
I was looking around my WinXP system panel and noticed that some program had changed the PERFORMANCE->ADVANCED->MEMORY USAGE from PROGRAMS (default) to SYSTEM CACHE.
Keep in mind as I detail this to you that this build is only a week old, and I've installed very few programs on it, drivers and test utilities mostly...
Anyway, I change the setting back to the default value (PROGRAMS) and hit OKAY. That very instant, the machine reported detecting new hardware, an Audigy! Given that I already had an A2 installed and mostly functional, this came as quite a revelation.
I checked the Device Manager, and sure enough, there it was. An Audigy was indicated as having been installed in the place of the newer model.
I reboot the computer, and when I revisit the Device Manager, the Audigy2 is back, BUT there is a problem (ROLMAO), the card's firewire adapter is all of the sudden marked as broken, so I uninstall it and reboot.
The machine goes through its startup, and I check the firewire and its okay, NOW, in Device Manager. Good, me thinks.
Then I go back and run 3DMark03, looking for my error message: FMOD error in FSOUND_SetPaused: Not enough memory
The benchmark completes without incident three times and the problem is solved. No more messing with my memory timings or sound accelartion. Hurrah!
In closing, I want to apologize to anyone whose patience that I may have tested with this mini-testament.
I have no idea why this series of cards http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=290217 is so difficult to configure for the K8N, but its really kind of a nightmare, IMO, and MSI really needs to take a look at it.
Please guys, there is a problem here, so would you please check it out for us.
Thanks,
Moe

How do I find out what's wrong with my sound card?

I just tried to watch/listen to a video on Youtube and no sound was produced. I tried multiple other vidoes and the same thing happened. Then I opened Spotify to see if that would work, and it didn't, but it said that something was wrong with my sound card. I'm not sure exactly what that means, so if someone could potentially help me that would be great! My pro is about 8 months old so it should be having all these malfunctions (there have been others...)
On a side note, iTunes wouldn't even open due to "an unknown error".

Try these:
for some of your issues, open disk utility and verify your disk permissions - repair if needed. might take an hour or less depending on how much errors needs to be repaired....once done, restart your macbook....
for your sound issue - do a PRAM/NVRAM reset....
good luck....hope you get it sorted out....

Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

ok thankx! but i must to know the output impendatie of my audio card= intel high definition audio? can somebody help me
this is my mac book
http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.0-alumi num-13-late-2008-unibody-specs.html

Problem with the sound card

Hello everyone,
So here for 2-3 days, the sound of my Macbook starts beuguer (buy in October 2014). So when starting the mac when I listen to music all goes well, I can adjust the sound using the keys on my keyboard, and when I ca defois support appears to me that the sound is cut off, I think it 'is a problem with the sound card. But as soon as I plug in headphones, not set I have to go through the system preferences. By unplugging the problem remains the same on his fate, but impossible to resolve through the keyboard. I tried to put the volume icon on the top bar but even by setting it does not work here. The problem resolves itself after 30 minutes-1 hour. It's very annoying. Thank you in advance for your answers.

Hi, Dolve
This could be either hardware or software, so let's start with trying to get all drivers and software up to date. This page has updates for all your system. I would recommend getting at least your latest audio driver and BIOS downloaded. Following the installation, try using your sound again and see if the issue still persists.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

PROBLEM WITH MY SOUND CARD .......H.P IS REALLY NOT GOOD.....!

I PURCHASE HP PAVILION DM4 2000 SX ONLY 2 WEEK AGO AND I HAVE PROBLEM WITH MY SOUND CARD WHEN I REMOVE HAND FREE THIS MACHINE QUITE AND AGAIN PLAY VIDEO SONG ETC THAN COME SOUND ....!
ANY 1 HAVE IDEA WHAT PROB WITH THIS....!

Did you download and install the latest Realtek Audio drivers from the Realtek site?
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Accept the agreement. Download and install the first or second driver on the list depending on whether you installed W7 32 or 64 bit.
If that doesn't work, I don't have any other suggestions for you to try.
Paul

Insipre 4.1 speakers system with an audigy sound card

I have a sound blaster audigy card with insipre 4.1 speakers. My speakers just stopped working. I have downloaded the latest versions of all the creative drivers, run the diagnostics, and checked all sound settings. Everything is correct as far as my settings go.
I plugged my headphones directly into the sound card and they are working just fine.
Any help would be appreciated greatly.

Ershoff,
You really got me spinning. You mention in the first post that you had used a headphone to test the sound card and there is sound output but now you mention the another speaker you used on the card had no sound output. Are you using a digital speaker set?
Try testing the Inspire speaker first as I believe the problem may lies on the speaker and not the sound card.
Jason

Latest Update Causes Problem with Creative Sound Card?

I installed the latest Quicktime update (7.3.1) and Windows Media Player would no longer work, giving me a message that my sound card (Creative Sound Blaster Audigy) was broken. I ran the sound card diagnostics and indeed it failed several of the the test (particularly wav files). I also tried streaming music via my XM radio subscription and that also did not work.
I reverted my system to its previous state (before the Quicktime update) with Norton GoBack, and now everything works again.
Anyone have a similar problem? Is this a bug or perhaps was there a glitch in the installation that caused this?
Thanks,
wasaguru

I'm not having that problem, but I am having a problem of my computer being locked up once it goes into sleep mode.

Question about Audigy sound card

Hi everyone, right now i have a very outdated sound card, a creative li've 6 bit. It sucks i'm not going to lie. But anyways, i have my home theatre system hooked up into it through a Y splitter cable so that i can hook the rca cables into the /8 slot in the sound card.
If i turn up the speakers really loud, i hear a static noise, a hum and fuzz if you will. The music usually drowns it out but then if the music stops i'm left with an awful hum. I am for sure upgrading to the Audigy Extreme, and i'm wondering if that would have any affect? I know the sound of the actual movie or song will be way better, but how about that hum?
Hopefully you all can help!
thanks so much!

sprint_9,
Yes, you're right. The Digital I/O module isn't compatible with the Audigy 2 ZS soundcard.
You should be able to find a 3.5mm mono to RCA cable easily from your local audio/electronic stores if not, you can also get a 3.5mm stereo to dual RCA cable for the same purpose. Take note, only one end of the RCA cable has the audio signal(Sorry, can't remember whether it's the white or the red end).
You can also find such cable from online stores like this.
http://www.ramelectronics.net/html/RCA-mini-spdif.html
Jason

No Sound Issue with PHASE88 sound card

K8T Neo series motherboard, socket 754 - NO SOUND ISSUE
I'm using a AMD athlon64 processor
I am having problems with my PHASE88 sound card. Windows XP regonises it and says the "driver is enabled but has not been started." I can't fix this problem in the device manager anywhere and so I was thinking it may be a conflict with the onboard Audio. I can't find in the BIOS where to disable the on board audio - can someone help?

Hi
Page 3-20 of manual
Integrated peripherals - onboardPCI controller - AC97 sound -disable it.
You may have to install device with New Hardware Wizard in Control panel.
cheers
Jocko

LED setup on DTT3500 with Audigy Player card

First off. I've connected my Audigy Player card to the control box of the DTT3500 speakers with a digital jack to DIN cable. I have the 9th light iluminated and the third. Is it okay to cycle through the different LED's, like when i want to play games and want to listen to music? Will i loose my digital output?
Second, i have lost my Audigy driver CD, so I don't have Audio HQ etc. installed on my PC. Is there anywhere i can download them?
Third, when i try to play DVD's in PowerDVD and set the sound output to Use SPDIF my input DIN light on the decoder starts flashing and i loose my sound. I can use it with 6 speakers/Dolby. What could be the problem here?
Oh - and if i can't get Audio HQ how should i setup CTpanel?
Message Edited by DildePer on 01-06-2005 12:38 PM
Message Edited by DildePer on 01-06-2005 12:39 PM
Message Edited by DildePer on 01-06-2005 04:23 PM

I had the audigy zs platinum pro & DTT3500 set (connected via digital din) LED's set to....
fourpoint/5.1 din & dolby digital DIN
with just those the center speaker didnt really work, but it was the best setup i found for music/games/dvd's etc - so pretty much I was only using them as 4.1's but found it fine.

Front audio with PCI sound card?

Well, the front audio on my Antec P160W worked perfectly with the integrated sound, but I changed to my SoundBlaster Audigy Player because of the HORRIBLE audio quality. Now the front audio ports don't work. What do I need to do to make it work again? I'm not going back to the integrated.
At first I thought that I had to put the connectors for the front audio on the sound card, but the manual of it doesn't show any of those features.

I was wondering that myself. The only thing I think you could possibly do is have both the onboard and the pci sound card enabled and use the onboard sound just for the headphones. I have no tried this yet as I do have the cables connected to the mobo but I have the onboard sound disabled.

Attached mixing board with audigy sound card probl

Similar Messages

Maybe you are looking for