Attached Movie Problem

I have a ComboBox in a MovieClip that was attached on stage
with attachMovie. I can't make it send out events (like "change"),
when I change the selection, or click on it etc. If it wasn't
attached, but had been placed on stage in the designer, adding a
listener to the comboBox works. Can anybody help please?

Events don't get propagated to the children, you have to do
this manually. This article shows some ways:
http://www.senocular.com/flash/tutorials/buttoncapturing/.
hth,
blemmo

Similar Messages

Attaching .MOV to email

When I attach a .MOV to my email it's coming up in duplicate and very small. This hasn't always been the case. I've sent many .MOV through email with no problem till now. Any help would be appreciated.

I believe you posted in the wrong forum. The iPhone can not attach MOV files to emails.

Attach movie - broken buttons - targeting

Let's say i have a simple movie clip called "navBar" and in
that movie clip I have nested another movie clip called
"green_btn". I have assigned linkage to both clips the first as
"navBar" and the second "green_btn". It is removed from the stage
and saved in the library with proper linkage.
Now let's say I return to the stage and create a "holder" for
my attached movie. I leave it blank, I call it "myHolder_mc" and
assign it linkageand give it a instance name of "myHolder_mc" and
move the cross hairs to the upper right hand corner.
Then I create a red button movie clip on the stage of a red
circle called "red_btn", and give it a instance name of "red_btn".
I will use red_btn.onRelease to load up the attachedMovie. When I
press the red_btn, the "navBar" movie attaches fine.
OK, thanks for sticking with me this far - HERE IS THE
PROBLEM - I want to be able to target the "green_btn" that is
located in the original navBar and assign it a onRelease function.
I can't seem to be able to target it, and have tried to find the
right target path, but can't seem to do it correctly.
So here is the code so far that isn't working
red_btn.onRelease = function(){
myHolder_mc.attachMovie("navBar","navBar", 0)
// the green_btn is nested inside of the navBar movieClip
myHolder_mc.navBar.green_btn.onRelease = function(){
trace("hello")
What should I do?

If you are importing the swf into the library it will lose all its actionscript. You need to either copy that file from its original fla and create it as a movieclip in your other file (copy its timeline into a movieclip) or load that swf dynamically when the file is running using actionscript.

FlashLite 3.0 attach movie is not working properly.

Hi friends,
I have bulit the Flash lite 3.0 application i.e. video player .
i have crated the dyanmic menu using attach movie application.
this menu is working good on Flash CS3 emulator but when i create the CAB file this menu is not working proper.
Can you please suggest solution for this.
This Problem will occur only on Windows mobile 5.0.
Regards,
Manoj

attachMovie doesn't work ?
Then put your component in the scene instead of linking it from the library.

Can't attach movie correctly

Something has changed my ability to attach a viewable movie to an email message. Up until recently, movies like .wmv would attach as a little icon in the message that, when clicked would open Windows Media player for viewing. However, .mpg movies would run right in the message window. This worked well.
The new development is that .mpg's that I now attach to a message do appear in the message window, but they run in a tiny little icon, where they used to appear as the original approx. 340 X 280 format. The icon-sized thing is not worth sending, but I can't figure how to restore normal behavior. Sometimes I get multiple copies of the same little movie icon in the message window.
The upgrade to 10.4.11 that I did yesterday is suspect. When I boot from my other drive that is running 10.4.10, the attached movies appear as expect, as 340 x 280 in the message window. What happened, and how do I change it back in 10.4.11?
iMac 17" 1 GHz, 768M RAM.

The symptom went away during troubleshooting. I have another bootable drive with 10.4.10, and when I booted from it, the symptom went away. Booted from 10.4.11, and I still had the problem.
I reverted the 10.4.11 drive to 10.4.10 using SuperDuper, and everything was then fine when booting from either drive. I first suspected Quicktime, so I upgraded Quicktime 7.2 to QT 7.3. No problem. I then re-upgraded OS X from 10.4.10 to 10.4.11, but the symptom has not reappeared. So for the time being, it ain't broke anymore.

My macbook air will not attach mov files to gmail

Not able to attach mov files to gmail. I have a macbook air. this situation has occured over the last couple of weeks and this is not a large file.

Twyla2 wrote:
My Macbook Air will not connect to wifi. I have tried updating the software and still nothing. Any idea how to fix?
Care to share which software you were unsucessful in updating? Which OS version you are using?
===========
Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT4628 Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.

Attaching movies and removing them

Hello!
Im having ome issues with my attach movies and deleting them.
I can do it once, but then, if i use the function again they
pop up but cant make them delete again.
POP > DELETE > POP > DELETE(not deleting)

The problem is that people will do that create and remove
many times, and i can do it once, but then i cant delete it again,
it will not go away more than 1 time

Attach movie (not using a button)

I'm trying to attach movie on frame 1 on timeline. I'm using
the following script and nothing happens:
myMovieClip.attachMovie("graphic", "g", 1);
g._x = 260;
g._y = 250;
When I use this script attached to a button it's working:
on (press) {
attachMovie("graphic", "g", 1);
g._x = 260;
g._y = 250;
any idea what can be wrong?

>>myMovieClip.attachMovie("graphic", "g", 1);
This code assumes there is a movieclip with instance name
'myMovieClip' on level0.
>>do i have to give the movie clip an instant name
No.
>>i gave the name -graphic- in the linkage under
identifier
That's correct.

Attach movie clips to scrollPane using attachMovie

Hi
I tried to attach movie clips to scrollPane using attachMovie
but could not do it
I tried the following code:
sp.contentPath="emptyMovieClip"
sp.content.attachMovie("boxesRow","boxesRow1",1)
trace(sp.content.boxesRow1)
Im able to trace the sp.content.boxesRow1 , but not seen in
the scrollPane
Can any one suggest me , how can I do this
Pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Thank you very much

hi,
The code is correct....
But, what i want to know is, are using the Identifier name of
the moviclips ???
"emptyMovieClip" should be an Ideintifier name for an empty
clip in the library.
and "boxesRow" should refer an identifier name of another
movie clip in the library...(its should also contain some object
for the visibility check)...

Attach Movie Clip to ScrollPane

Hi
I tried to attach movie clips to scrollPane using attachMovie
but could not do it
I tried the following code:
sp.contentPath="emptyMovieClip"
sp.content.attachMovie("boxesRow","boxesRow1",1)
trace(sp.content.boxesRow1)
Im able to trace the sp.content.boxesRow1 , but not seen in
the scrollPane
Can any one suggest me , how can I do this
Thank you very much

hi,
The code is correct....
But, what i want to know is, are using the Identifier name of
the moviclips ???
"emptyMovieClip" should be an Ideintifier name for an empty
clip in the library.
and "boxesRow" should refer an identifier name of another
movie clip in the library...(its should also contain some object
for the visibility check)...

Attach movie confuison

Hi,
I need a help. I created a movieclip called ball and added
linkage as 'ball' and also checked the option 'export in first
frame' it is working fine,
BUT if i do like that then exports the movie clip in first
frame and it take big time to show preloader since the movie clip
is soo big,
I WANT TO ATTACH MOVIE WITHOUT MAKING IT TO 'EXPORT IN
FIRSTFRAME' is there any posibilites
Thank you in advance.

hi,
The code is correct....
But, what i want to know is, are using the Identifier name of
the moviclips ???
"emptyMovieClip" should be an Ideintifier name for an empty
clip in the library.
and "boxesRow" should refer an identifier name of another
movie clip in the library...(its should also contain some object
for the visibility check)...

Buttons in an attached movie from library

I used the tutorial posted at
http://www.layersmagazine.com/flash-attaching-movieclips-actionscript.html
Now I have a button on my stage that attaches a movie from the
library.
on (release) {
this.holder.attachMovie(“contents”,”contentslinks”,1);
It works fine but I also have buttons inside the attached
movie clip that need to control a movie that is already on the
stage.
contentslinks.contents_link_1.onRelease = function() {
content_mc._visible = false; book_mc.directGotoPage(4);
If I just place the attached movie on the stage the buttons
work but I when I proceed to use attachMovie, they do not work. How
do I get the buttons in the attached movie to address the movie
that is already on the stage?

you can use the enabled property of movieclips to
enable/disable them.

Attaching movie clips to other movie clips

I have mc1 nested like this
_root.mc3.mc2.mc1;
If i want to attach the mc1 from within mc2 timeline to the
_root timeline how can I do this?... I don't want to reattach it
from the library it must be the nested mc1 that is attached to the
root timeline.
Is there a way to attach movie clips to other m.c's in this
way?
regards J

I've spent nearly a year creating this site... I just taken a
glance at AS3. And sizeable isnt wrong... mamouth is closer. Other
than having to learn AS3 it would take me months to rewrite
everything. Is AS3 actually that much better than AS2? Either way
im gonna finish the site in AS2 and try and find a work around for
my attaching mc's to other mc's. Maybe one day I will convert it,
but it just looks like an unnecissary headache.
Thanks for your help. J

Buttons within attached movie

I'm trying to do very simple, i'm attaching a map using
attachMovie, then I have two buttons one to print it and one to
close the movie. The code is contained within the timeline of the
attached movie not the root timeline.
attachMovie("mcmap", "map_mc", 200, {_x:100, _y:100});
close_btn.onRelease = function ()
{unloadMovie (map_mc)};
I hope I've set the linkage elements correctly and my movie
sits on the main stage and is not exported in the first frame.
Attaching the movie is fine, I just can't close or print the
map - I'm incorrectly targeting somehow but I just can't work out
why?
Can anyone help?

I worked it out - every post I make is because I still forget
about using paths properly - I know it's something to do with this,
but I always forget - sorry!
_parent.map_mc.unloadMovie ()};
was the correct choice!!!!!!!!!!!!

Resize attached movie clip

Hi,
I have a movie clip to which I attach several others always
at the same depth so one replaces the other. I was trying to change
the size of the attached movies by setting the ._width and ._height
properties and also by using the xscale without any luck. I finally
experimented with a tutorial example and got it to work and saw
that the only difference between the code in the example and my own
was the depth which I had set to 1 and the tutorial had set to 0. I
changed my depth to 0 and it worked.
I didn't see anything specifying that the depth had to be 0
and believe I am still missing something. If anyone cna help me
figure out what's going on I would appreciate it.
Thanks
Chris

From the location of the code, the relative path to newSlide
is
full_mc.newSlide as newSlide is in full_mc.
Thus you want:
function updateStage() {
full_mc.attachMovie(mySlide, "newSlide", 0);
full_mc.newSlide._width = 561;
full_mc.newSlide._height = 421;
full_mc.newSlide._x = 0;
full_mc.newSlide._y = 0;
Also note that you can do:
full_mc.attachMovie(mySlide, "newSlide",
0,{_x:0,_y:0,_width:561,_height:421});
Look up attachMovie for the optional initObect
parameter.

Attached Movie Problem

Similar Messages

Maybe you are looking for