Attachements hidden if send from work in process

Hi Froum,
GW Server 2014.0.0
GW Client 8.0.3 (latest FTF)
one customer often uses the "work in process" folder to save mails for later editing and sending.
Many of them have an attachement.
If any mail (with attachement) from that folder is edited and then send it gets deleted and moved to the trash while another copy is created in the send folder.
Difference between these two mails is:
* In the send folder the attachements are not visible (customer in fact receives mail WITH attachements)
* trash folder shows mail with attachements
Has anyone an idea what could cause this behaviour or is it just a setting?
Anyway I will upgrade the client to GW 2014.0.1 an test it again. Just curious what goes wrong here...
Thanks,
Pascal

Hi
     Results analysis version:
                 Check RA Versions T.code:OKG2-Multiple valuation field
If you are operating in different countries or want to carry out results analysis for different business purposes, you can define multiple results analysis versions. You can then carry out results analysis using the different versions.
The results analysis data is updated to the objects by version and can be analyzed in the information system.
Create different RA Version for profit center valuation and Group valuation.
Regards
Edited by: Dublin on Oct 22, 2009 12:20 PM

Similar Messages

  • SEND FROM works randomly

    Hi there!
    Exchange 2010 sp3
    Outlook 2010
    Two domains in different sites.
    A domain user in SITE1 and DOMAIN1 has an mailbox on SITE2 DOMAIN2.
    He is chosing to send from distribution group on SITE1 and DOMAIN1. Sending mail randomly works. Sometimes it goes thru other times the user needs to resend the message over and over again until it passes.
    Error messages are sth like:
    You can't send a message on
    behalf of this user unless you have permission to do so. Please make sure
    you're sending on behalf of the correct sender, or request the necessary
    permission. If the problem continues, please contact your helpdesk.
    Do you maybe know where should we look for the root of the problem?
    bostjanc

    Yup.  You do not need two separate OABs. You need to add extra locations where the *same* OAB can be downloaded.  In 2010 the OAB is generated on a specific MBX server then the file replication service copies it out to the distribution endpoints
    - CAS. And this list of CAS are the ones allocated to serve out the OAB. Details in here:
    http://blogs.technet.com/b/rmilne/archive/tags/oab/
    I do want to ask how you decommissioned 2003 - something is not right with this. What steps did you follow?
    I see a note about "manually removing" 2003.  Not surprised that you are hitting this as there is NO check to see what replicas and links were to those servers that get whacked out of AD.  That is not something that should be done. 
    Williard, I think we are going to see a large uptick in these types of cases......
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Jpeg attachment probles when sending from Mail to windows mail applications

    hi guys. I hope someone can help me as I have been going round in circles for months with this problem.
    The task is to send a jpeg attachment - simple isn't it!
    No problems attaching it, whether is embeded or viewed as an icon, that's ok. i have selected the option "always send windows friendly attachments" too.
    The problem is on the other end. Pretty much every time I get an email back saying that the images are embeded on the email and cannot be saved (right click, save as...) nor they appear listed as attachments. Not only that, but most times they also appear deformed with weird dimensions and loss of quality.
    Can someone help me out here, as you can all imagine sending images is pretty common these days, and whether we like it or not, most people use PCs still

    I'm afraid that you don't really have the same problem. You may have the same symptoms but you are not using the same email program, the same server (unless you are also using Gmail), and you are encoding your emails in a Mac specific format.
    http://kb.iu.edu/data/abzn.html
    I did find a tech blurb that said: "On the Macintosh, the default encoding method for attachments has been changed from BinHex to AppleDouble. This default works across platforms with all MIME-compliant email programs, including Eudora and Microsoft's Outlook Express and Outlook 98."
    I quit using Eudora when OS 10.2 came out, so I don't know much more about changing your method of encoding. I checked and the last version of Eudora came out in 2006. Qualcomm has discontinued development for Eudora and none of my clients are using it since it has become a dead end. The last version of Eudora is reported to work with Leopard if you make some changes in the sound files. There is still access to the support forums here:
    http://eudorabb.qualcomm.com/forumdisplay.php?s=0936570a42fd9c7b0631c91819e3d099 &f=10
    I guess that Thunderbird is the recommended program for Eudora users to migrate to if you don't want to use Apple Mail.
    You should probably start your own thread with the words "Eudora Attachments" in the title so that people who are using Eudora will see the name of the program and respond with up to date information.

  • Receiver From Field of Send Step of Integration Process

    Could somebody please explain how this works? I cannot get receiver determination to work for a synchronous send of an Integration Process, and I think this is the problem.
    Documentation states the following:
    Calling a Receiver Determination Defined in the Integration Directory
           1.      In the Receiver From field of the properties area of the send step, select Send Context.
           2.      In the Send Context field, specify a character string for the send context.
    You can choose the character string yourself. You must specify the send context to be able to send messages from the same message interfaces to different receivers in different send steps.
           3.      Query the send context in a corresponding condition in the receiver determination in the Integration Directory.
    I just don't get this; if I choose the character string myself, how do I use it in step 3? I cannot see any way to query the send context in a condition. Is the Send Context the name of the receiver?
    If somebody can walk me through this step I would be very greatful!
    Kind Regards,
    Tony.

    Tony,
    An example
    Integration Repository
    I have a synchronous send step with the Send Context set to ABCDE
    Integration Directory
    In the Receiver Determination, Configured Receivers, enter the Condition Editor
    Select Left Operand and enter the Expression Editor
    Select the radio button for Context Object
    Use the dropdown to select ProcessStep
    Select OK
    Select Right Operand and enter your value, eg ABCDE
    Runtime
    When I run my scenario an entry can be seen in SXMB_MONI corresponding to my send step.  In my case it is displayed in the top Window
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
      <Trace level="2" type="T">......old attachment XI_Context found</Trace>
      <Trace level="3" type="T">Append context with name =ProcessStep and value =ABCDE</Trace>
    You can see here that the ProcessStep has the value ABCDE
    Hope this helps

  • HT4528 how do I attach a photo to an email I want to send from my IPhone 4s

    How do I attach a photo to an email I'm sending from my Iphone

    timothy.a.clifton wrote:
    There is not a function in the iOS mail app to add attachments, has to be done from the app you want to share the content from.
    That's not entirely correct, and certainly not for photo or video. To attach a picture or video to an existing e-mail, what cheonweb states above works (tap and hold in an empty part of the e-mail, then tap the right arrow in the pop-up to get the "Insert Photo or Video" option).  You can also copy a picture from the web to the clipboard and paste it into the body of the e-mail.
    For other types of files, you're correct in that you have to start from whatever app can open the file type you want to send via e-mail.

  • Sending (imap) email draft with attachment created on computer from iphone

    Here's one situation:
    I type up an email and attach an excel file to it, then save it as a draft (in my @me.com drafts).
    The draft email is now visible in the drafts folder on all of my devices: apple mail on my computer that I originally used, my iphone mail drafts, and also by signing on to www.me.com and opening my mail drafts.
    one problem is when you open up an email draft on me.com that was created on a computer mail.app, only to see the message body text lose all of its formatting and appear to be jumbled html.
    My main concern / question is:
    The email draft with attachment appears to be in tact on me.com and on the original computer, but NOT on the iphone. On the iphone, the attachment seems to disappear. Well, not disappear, because it gets replaced by a small rectangle with a blue question mark in it. Basically you cannot view the attachment on the iphone. When you try to send this draft from the iphone, it works, but with jumbled text & no attachment.
    Does anyone have similar problems???

    You are correct about the iDisk app as I have started to use that a little bit more for the sharing purposes.
    However my concern wasn't over the simple task of getting excel files onto the iPhone. It's the fact that email attachments that are either in drafts, OR ALSO if you move a message (with an attachment) into an IMAP email folder, are completely lost when it comes to viewing or sending them from the iPhone. It's stupid - the attachments are still there on my computer (and I think they are still there on the me.com mail viewer as well).
    Sometimes I move certain important work emails (that have attachments) into an IMAP email folder so they can be accessed from anywhere. The fact that the iPhone shows the paperclip and placeholder bit not the actual file is maddening. At least If the attachment was actually SENT from the iPhone, I wouldn't even care about not being able to view it (or even view the File name that is also lost).

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • How can I fake my FROM email address to look like I'm sending it from work?

    I want to not have to log into my work webmail everyday and I want to just use MobileMe. I have all my work mail forwarded to MobileMe. The problem is that I don't want to ever have to log into work mail to send a message. How can I fake my from email address to look like I'm sending it from work?

    You can't do that with MobileMe. MobileMe's mail servers will only accept senders from their own domains (@mac.com and @me.com). No other senders, not even from configured personal domains, will be accepted.
    You will either have to use your companies SMTP server or, if not public available, your companies webmail.

  • When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open.  How can I change this?

    When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open.  How can I change this?

    It should be an attachment.  Your Mac just displays a preview of certain attachments (such as .pdfs) in the body of the message.  A PC, for example, will see it as an attached file rather than a preview.
    You can save the attachment on your Mac by Control-clicking on it and selecting Save Attachment.

  • I would like to play music from my iPhone 5 on the speakers attached to my computer at work. I don't have the authority to download itunes onto the computer. Can I play the music from the phone without having itunes on the computer?

    I would like to play music from my iPhone 5 on the speakers attached to my computer at work. I don't have the authority to download itunes onto the computer. Can I play the music from the phone without having itunes on the computer?

    KiltedTim wrote:
    The cable would be much cheaper than the Scotch!
    But much less fun or satisfying.
    Signed,
    An IT guy 

  • Override default send from email id and attachment name in email delivery

    How to override the default send from email ID and attachment name to send an outbound document using Email Transport protocol in Oracle Integration B2B ?. I've seen that "[email protected]" and subject of the email message were used as send from email ID and attachment name respectively

    Ramesh,
    I set the send from email ID as Generic Identifier for host and send to email ID as Generic Identifier for trading partner and used it in the agreement. How ever still the email message is generated with "[email protected]" as send from email ID.
    However I noticed that the "FROM" field in the wire message is updated with the correct send from email ID which I used as the Generic Identifier for host.
    Please advise.

  • How to send JMS Message from a BPM Process

    Hi All
    I have small query regarding sending JMS Message from a bpm process. Is it possible to send JMS message from one bpm process to another bpm process.
    I have a scenario in which I need to send a JMS message to a queue where another process is listening on that queue and as soon as the message is received on the queue the process instance is created.
    I know how to listen for the JMS message on the queue, but I don't how to send a JMS message from a process.
    Also Can I create process by sending the Notification to the process instead of a JMS message. But the process to be created is not a subprocess i.e. Can notification be send accross different processes.
    Any information or example in this regard would be helpful.
    Thanks in advance
    Edited by: user9945154 on Apr 22, 2009 7:46 PM

    Hi,
    Here's one approach to sending JMS messages from an Oracle BPM process. If you're doing this just to send a message into another process, do not take this approach. It's far easier and quicker if you do this using the OOTB "send notification" logic.
    These steps describe how to do this using WebLogic. The steps would be different if you're using another ap server / JMS provider.
    1. Guessing you've already done this, but first expose the two required WebLogic jar files for JMS messaging as Java components in the External Resources. The two files for WebLogic are weblogic.jar and wljmsclient.jar” (located in the < WebLogic home directory > /weblogic/server/lib” directory).
    AquaLogic BPM JMS Queue Listener for WebLogic 8.1
    2. You've probably already done this, but add an External Resource to represent the J2EE container:
    • Name: “weblogicJ2EE” - this is important and will be used in the next step
    • Supported Type: “GENERIC_J2EE”
    • Initial Context Factory: “weblogic.jndi.WLInitialContextFactory”
    • URL: “t3://localhost:7001”
    • Principal: and Credentials: whatever userid and password you defined to access theWebLogic administrative console.
    3. Create the External Resource that represents the send queue configuration. In this example, I'm calling it “WebLogic Send Queue”. This is important - remember what you named it because you will use this name in the logic that sends the JMS message. This new External Resource is configured as:
    • J2EE: “weblogicJ2EE” (same name as the second External Resource you created)
    • Destination Type: “QUEUE”
    • Lookup Name: “weblogic.examples.jms.exampleQueue”
    • Connection Factory Lookup Name: “weblogic.examples.jms.QueueConnectionFactory”
    4. Here's the logic to send a Message to the Queue
    <pre class="jive-pre"><p />msg as String = "Hello World"
    jmsMsg as Fuego.Msg.JmsMessage
    msg = "<?xml version=\"1.0\"?><Msg>" + msg + "</Msg></xml>"
    jmsMsg = JmsMessage(type : JmsMessageType.TEXT)
    jmsMsg.textValue = msg
    sendMessage DynamicJMS
    using configuration = "WebLogic Send Queue",
    message = jmsMsg</pre>
    Note that the “sendMessage” method uses the configuration parameter “WebLogic Send Queue”. You previously created a JMS messaging service External Resource with this name in the third step.
    Again, please don't go this route if you're just using it to send notifications between processes,
    Dan

  • Had problem with my hotmail account and had to change my password. Ever since then, my default e-mail account set up to hotmail doesn't work...it sends from gmail. How can I correct that?

    Had problem with my hotmail account and had to change my password. Ever since then, my default e-mail account set up to hotmail doesn't work...it sends from gmail. How can I correct that?

    On your iPhone you need to change your password in 2 places:
    - Incoming Mail Server and
    - Outgoing Mail Server
    To get to the password entry for the Outgoing Mail Server you have to tap on cell smtp.live.com and again on the second view.

  • How to send an attachment of a file from a procedure

    Hi
    How to send an email with an attachment of a file from a procedure

    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm#sthref14875
    http://asktom.oracle.com/pls/asktom/f?p=100:11:1400170679814652::::P11_QUESTION_ID:1739411218448
    http://www.akadia.com/services/java_mail_plsql.html

  • Can i send mail to yahoo from work flow

    can i send mail to yahoo from work flow  if it is possible how do i do that ? is this program enough if yes how do i do that ? do i need to write or change any coding

    Hi Neo ,
    You can use Function module  'SO_OBJECT_SEND' from your BO Method.
      For this Function module to work Email configuration should be done for 
      external  addresses..Please check with your Basis team for necessary config.
    Thank you
    Srinivas

Maybe you are looking for