Attaching a URL which does not start with HTTP / HTTPS in SAP TM
Dear Experts,
I am trying to insert a new URL to a Attachments table in FWO / FRB application.
My URL neither start with HTTP nor HTTPS (Ex: Z3://searchsmartstart...). while I am trying to insert such URL, I am getting an error message 'URL not valid.Check if the URL contains the protocol (HTTP/HTTPS). Message ID - /SCMTMS/UI_MESSAGES and message number 088.
After some analysis, I have understood that WebDynpro ABAP framework does not accept such URL.
Could you please guide, is there any other way of doing it? The URL which I am trying to access is of SMART CLIENT.
Thanks in advance for your reply.
Thanks,
Bharath.K
Hi Bharath,
Yes, you can achieve the same via URL redirection. Please follow the below steps.
1.Create a service in SICF e.g. sap/bc/redirect_z3 in your SAP TM system and follow following steps.
2. Create a class with interface IF_HTTP_EXTENSION e.g. ZCL_REDIRECT_URL
3. Maintain class created in step 2 into the Handler List of the service created in step 1.
4. In class ZCL_REDIRECT_URL Method IF_HTTP_EXTENSION~HANDLE_REQUEST write below code
Data: lv_target type string.
lv_target = 'Z3://searchsmartstart.......'
server->response->redirect( url = lv_target ).
5. You can also read the parameter from the source URL with below program code
CALL METHOD server->request->get_form_data
EXPORTING
name = 'PAR1'
CHANGING
data = lv_par1.
6. Now attach the URL of your service created in step 1(Which will be http/https URL) to Attachments table in FWO / FRB application with parameter you want.
Now once you click this URL , Mehtod IF_HTTP_EXTENSION~HANDLE_REQUEST in Handler list class will execute here you can read the parameter as mentioned above and form a target URL and redirect to you intended target .
Thanks, Pravin
Similar Messages
-
I have a URL I need to access "http://vb.bytware/forums/index/php" but fire fox keeps adding WWW to he beginning of the URL returning "http://www.vb.bytware/forums/index.php" whis is worng and therefore returns a Site not Found error.
== This happened ==
Every time Firefox opened
== today - the first time I entered the URLLooked at a cached copy and this was the original text:
"Stop FireFox from adding www. or .com
Ever wish FireFox would stop trying to fix "broken" URLs by prepending www. (or appending .com) to the server name? If, like me, you find that more irritating than helpful, you can disable it globally:
more ...
1. In FireFox, go to http://about:config (this is a special manual configuration page all Mozilla-based browsers have; be careful, as you can really much things up!)
2. In the Filter box, type in fixup and hit Enter (this will hide all the config elements except those that match this term)
3. Click on the browser.fixup.alternate.enabled element; you'll see it change from Default to User Set, and from True to False.
4. Done!
To re-enable this, just repeat -- it'll toggle the other way. Changes are saved automatically. "
Update #1:
I've tried this but it doesn't solve the issue (v 3.6.13).
Update #2 :
There's two additional config entries:
# browser.fixup.alternate.prefix - (www.)
# browser.fixup.alternate.suffix - (.com)
Changing these / removing the entries makes no difference either. Even after a reboot. Looks like a bug.
Update #3 :
Even when copying the correct url - verified to work in IE. It still insists on rewriting the url by removing the port number and adding www. and .com.
e.g. "http://localhost:8080/issues" becomes "http://www.localhost.com/issues". Really lame. -
Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
TerrenceHey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M. -
Error: response does not start with HTTP
hi,
i am using a MIDP class to send a string to a java servlet which then returns a .gif image. the string is being successfully to the servlet, but an exception is being thrown when the image is being sent back.
java.io.IOException: response does not start with HTTP it starts with: GIF89aï4
at com.sun.midp.io.j2me.http.Protocol.readResponseMessage(Protocol.java:2166)
at com.sun.midp.io.j2me.http.Protocol.finishRequestGetResponseHeader(Protocol.java:1934)
at com.sun.midp.io.j2me.http.Protocol.sendRequest(Protocol.java:1598)
at com.sun.midp.io.j2me.http.Protocol.sendRequest(Protocol.java:1517)
at com.sun.midp.io.j2me.http.Protocol.openInputStream(Protocol.java:484)
my code is as follows in the midp class :
HttpConnection c = null;
InputStream is = null;
StringBuffer sb = new StringBuffer();
String url="http://localhost:8090/ProjectServer/createMap";
url=url+"?Source="+src+"&Destination="+dest;
try {
c = (HttpConnection)Connector.open(url,Connector.READ_WRITE, true);
c.setRequestMethod(HttpConnection.GET); //default
//is = c.openDataInputStream();
is = new DataInputStream(c.openInputStream()); //openInputStream(); // transition to connected!
Image im=null;
try
ByteArrayOutputStream bStrm = new ByteArrayOutputStream();
int ch;
while ((ch = is.read()) != -1)
bStrm.write(ch);
// Place into image array
byte imageData[] = bStrm.toByteArray();
// Create the image from the byte array
im = Image.createImage(imageData, 0, imageData.length);
finally
// Clean up
if (is != null)
is.close();
the code in the servlet is as follows :_
ServletContext sc = getServletContext();
// Get the MIME type of the image
String mimeType = sc.getMimeType("route.gif");
if (mimeType == null) {
sc.log("Could not get MIME type ");
response.setStatus(HttpServletResponse.SC_INTERNAL_SERVER_ERROR);
return;
// Set content type
response.setContentType(mimeType);
// Set content size
response.setContentLength((int)file.length());
// Open the file and output streams
FileInputStream in = new FileInputStream(file);
OutputStream outstream = response.getOutputStream();
// Copy the contents of the file to the output stream
byte[] buf = new byte[1024];
int count = 0;
while ((count = in.read(buf)) >= 0) {
outstream.write(buf, 0, count);
in.close();
outstream.close();
il be immensely grateful if some1 cud tell me whre i am gng wrong.
thnx,
nevHi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
============================================
HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
Then I tried to open a socket connection as bellow:
======================================
SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
String get = "GET /stream/1074 HTTP/1.1";
DataOutputStream os = conn.openDataOutputStream();
os.writeUTF(get);
InputStream is = conn.openInputStream();
But then I got the following error:
=========================
java.lang.SecurityException: Target port denied to untrusted applications
Could someone help me to find out what is going on?
Thanks a lot! -
I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
It does the same thing when using msi with the command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
Here is my setup.ini file
[Startup]
RequireOS=Windows XP
RequireMSI=3.1
RequireIE=7.0.0000.0
Require64BitVC10RT=1
CmdLine=/spb /rs /sl"1036"
[Product]
msi=AcroPro.msi
vcrtMsi=vc_red.msi
vcrtDir=VC10RT_x64
Languages=1033;1036
2052=Chinese Simplified
1028=Chinese Traditional
1029=Czech
1030=Danish
1043=Dutch (Netherlands)
1033=English (United States)
1035=Finnish
1036=French (France)
1031=German (Germany)
1038=Hungarian
1040=Italian (Italy)
1041=Japanese
1042=Korean
1044=Norwegian (Bokmal)
1045=Polish
1046=Portuguese (Brazil)
1049=Russian
1051=Slovak
1060=Slovenian
1034=Spanish (Traditional Sort)
1053=Swedish
1055=Turkish
1058=Ukrainian
1025=English with Arabic support
1037=English with Hebrew support
6156=French (Morocco)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=3
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
Does it means that the serial number provided was invalid for deploying ?
NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that. For now it's only not working at the command line.
Another important point is that the install works great without customization ! If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
So what goes wrong ?Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
I retried installing the initial package in French on a Windows 7 English and the software installed properly in French.
As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
That gave me the cue I needed to know. I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
I ran again the same command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
And everything works fine.
NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first. Otherwise the installation failed without any error message.
Thanks again to you for your good hint,
Bob -
"Layer 1 does not start with a new cell" replicator error
Hi All,
I recently sent a dual layer +R DVD off to our replication house and their system is returning a message that says: "Layer 1 of DVD-Video does not start with a new cell".
I know from reading that the dual-layer breakpoint must be set to the end of a cell, but what does the word "cell" translate into for DVDSP4?
I had the DVD DL+R set to Automatic and Non-Seamless for output for the break point. Should I just try setting the break point manually at the beginning or ending of a track that would be dubbed as just a little more than half the size of the content? (I know in OTP, the Layer 0 has to be bigger than Layer 1)
Please Help!
Cheers,
DustyThanks both of you for your replies.
Eric, I am currently exporting DDPs to send in to the replicator. I also emailed them asking if they accept this format for delivery. (Which I would hope they would, as it is, an answer to DLT of sorts) Thanks for bringing this up, DDP is new to me, as this is our first DL project for replication.
Drew, to answer your reply, yes I have two viable markers (chapter markers) that show up in black, not grayed out, in the tab you mentioned under formatting. I chose manual break point selection for this last disc I burned and chose chapter 4 of that track. (chapter 4 and chapter 5 of track 6 are only options) I have to assume that the "automatic" setting was selecting chapter 5, as it had to see that as the last viable marker available to select, as described in the DVDSP4 manual.
DVDSP4 says that all markers are considered cells- Or actually that tracks are cells and that the markers within them make up more cells. So my question, outside of DDP option, would be, "what truly constitutes a cell boundary in DVDSP4?" Is it the markers within the tracks or the beginning or ends of the tracks themselves?
As a side note, I burned the disc that received the error, "Layer 1 doesn't start with a new cell" from an IMG i created from DVDSP4 through Disk Utility. Word is that IMG's somehow don't include breakpoint information.
So at this point I don't know if it is the IMG or the fact that DVDSP4 wants the break at one of two possible chapter markers in track 6.
(Some more background- this is a TV show season DVD, with thirteen tracks of video, each with 12-14 chapter markers a piece.)
Any more thoughts to help clear the air on what constitutes a true new cell boundary?
Thanks sooo much Eric and Drew, I know this a long read.
Cheers,
Dusty -
I have always been able to sync by plugging into my computer Mac OS 10.6.8 which does not interface with icloud. Now my iphone only wants to sync calander and contacts via icloud and will not sync when plugged in. Does any one else have this issue and or ideas?
Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes -
ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.
No on the book title, no problem there.
The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
Thanks for getting back to me. -
I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
I am trying to install Acrobat XI Std silently by SCCM.
I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
Is there a way to check the language specified for ym serial number?
BryndonUpdate on a couple of details:
@Sabian,
Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
@Sebastian
I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors. -
Path login does not start with a "/" character
I get a "java.lang.RuntimeException: Path login does not start with a "/" character" in my WebApplication.
- Http Status 500
- The server encountered an internal error () that prevented it from fulfilling this request.
Instead I excepted the site for a Re-Login (timout after 10 min), What's wrong?
The server I use is: Sun Java System Application Server Platform Edition 8.0 (build b57-fcs)
Here is the full StackTrace:
[#|2004-05-26T14:50:50.609+0200|SCHWERWIEGEND|sun-appserver-pe8.0|javax.enterprise.system.container.web|_ThreadID=17;|Standard
WrapperValve[OwaFolderTree]: Servlet.service() for servlet OwaFolderTree threw exception
java.lang.RuntimeException: Path login does not start with a "/" character
at org.apache.catalina.core.ApplicationContextFacade.doPrivileged(ApplicationContextFacade.java:451)
at org.apache.catalina.core.ApplicationContextFacade.getRequestDispatcher(ApplicationContextFacade.java:255)
at com.space2go.icafe.S2GHttpServlet.service(S2GHttpServlet.java:3260)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
at sun.reflect.GeneratedMethodAccessor114.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:102)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:192)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:261)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:215)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:200)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:180)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:582)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:272)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:161)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:979)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:692)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:647)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:691)
at java.lang.Thread.run(Thread.java:534)It looks like you are getting this error when trying to use the RequestDispatcher. There are two different flavors of the RequestDispatcher :ServletRequest.getRequestDispatcher that will take a relative path and ServletContext.getRequestDispatcher that will only take absolute paths (ie start with a '/').
If yoy are trying the use the second version of RequestDispatcher you'll need to adjust the path to an absolute path.
http://java.sun.com/products/servlet/2.3/javadoc/javax/servlet/ServletContext.html -
I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks
I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise. -
help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete
According to Roaring Apps, there is a version of Protools compatible with Lion. But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS. It looks like you need to get up-to-date with your OS and the apps too.
http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3 -
I have aperture 3.4.4, which does not work with Yosemite. Is there a way to upgrade my Aperture version, or do I have to buy Aperture again?
If you own any version of Aperture 3, you are entitled to a free update. Only it can be tricky, if your version is not associated with your AppleID, because you bought it with a serial number.
Have you checked, if you can see an update at the App Store Updates page? Or an "Accept" button on the Purchases tab of the app Store?
Contact the AppStore Support and request a redeem code, to be able to buy the update for free. You will need to provide a proof op purchase of Aperture.
Use this link: http://www.apple.com/support/mac/app-store/contact/
Apple sent redeem codes for Aperture 3.6 to several users who had bought the version on disks, if they could provide a serial number. See for example this discussion: (The post marked as the solution)
Re: Aperture update not possible after update to Yosemite
It is really unfortunate you missed the window of opportunity with Mavericks MacOS X 10.9.5, when the update was easy. -
ABAP WebDynpro - ArchiveLink - PDF Error: "File does not start with..."
Hey community,
I have a WebDynpro application in which I want to show a Archive document.
I'm using FM 'ARCHIV_GET_TABLE' and then FM 'SCMS_BINARY_TO_XSTRING'.
But I only get the error message: (see also attached)
File does not open with "%PDF-".
Local\EWH...
Attachment two shows, how the data is stored in TOA03.
Document type is FAX .
I tried several FM and nothing worked.
Does anyone have an idea?
Thank you very much in advance.
FlorianHi Florian,
I don't think you need to use FM SCMS_BINARY_TO_XSTRING.
Just try to make of your binary output table from ARCHIV_GET_TABLE an xstring by concatenating all lines into one xstring.
Regards,
Julien -
How to map a url that does not match with the context root ?
does weblogic support url that does not match the context root ?
ex. the context root is AAA. the welcome page can be
retrieved using http://localhost:7001/AAA
Can it be configured to use http://localhost:7001/BBB to bring up the index.html in context root AAA ? if so, how ?I agree with Imp68.
It still amazes me that in 2014 so many web sites are still not standards-compliant and instead insist on sniffing for the user-agent. And, in the majority of cases, I've found that the websites work fine with any modern browser.
phardell,
To be clear, Safari is not the problem, the website is! The developer of this website is still living in the 1990s and needs to move forward with the times. Imp68's suggestion will cause Safari to "pretend" to be whatever browser you wish. Try choosing "Safari 7" if that worked for you in the past and the website will likely go back to working. If that does not work then try choosing "Internet Explorer 10" from the menu and see if that works.
No matter what the result, you should look at the bottom of the page for a link to report problems with the website. Submit a comment that tells them that they need to "modernize your website to support all modern web browsers".
Good luck.
Maybe you are looking for
-
Using iMovie to save project files to external hard drive?
I have a MacBook Pro with very limited space on the internal hard disk drive. I also have a few FireWire external hard drives. A friend recently gave me his Hitachi DZ-HS300A mini-DVD camcorder so I could copy footage off of it, load it into my machi
-
How can I change the font size on the post of WordPress?
I have found three websites which address WordPress style sheets: Playing With Fonts: http://codex.wordpress.org/Playing_With_… Font Size and Color: http://en.support.wordpress.com/editors/… How to Change Font Size In Wordpress: http://www.ehow.com/h
-
How do i remove my iCloud from my work laptop?
I have a mini mac at home, an ipad and iphone. they are all synced up and backed up to icloud. I also have it all running through my work laptop and i need to remove it all. I've been in system preferences to mail, contacts calendars and unchecked 'e
-
Logical name reset after system copy
Hello I´have a question regarding logical system set after performing a database copy from Production to Quality . In Quality the former logical system name before the copy was INT10 . After the refresh I want to runs the BDLS with conversion from th
-
My movie swf file in another swf
I cant get the movie I have loaded in ( a quiz ) to display the statistics about how many I have got wrong/right. is it possible to get it to show the data because it is the main part of the movie after the user has completed it. PM me and I will e-m