Attaching docs in master data

Hi, is it possible to attach documents of ms office to material master, bom,work center,routing, prts etc in ecc 6.0. pls advise how to do that?

Dear Yadav,
You can create documents using CV01N and attach MS office files and attach the same in the material master or BOM or PRT.
In one of my project we have used the same,but limited only in the material master and BOM.Again there will be storage limitation for
this,where your Basis consultant can guide you more on this storage limitation or if you have DMS implemented,then its possible.
Check this link to explore more,Re: Attach a document to my BOM
Regards
Mangalraj.s

Similar Messages

PDF attachment to Customer Master Data

Hello!
I have a requirement to create a attachment to the customer master data (TCODE FD02 for example) in background. In online mode, there is a icon on the top left that allows you to attach files.
I want to a attach a pdf file. Is this possible in background mode, like a batch input or a function module?
Thanks

I did not take action in this instance. Moderator action is usually quite clear - we leave a message explaining what we've done. I can guess what has happened here, but I can't say for sure. You posted a question, it was answered with a one liner "Search the forum with "SHD0". " This indicates that you could have answered the question yourself with a little research, or it was a basic question. .
(If it had been moderating it - in my area of expertise - I would have locked the thread entirely, or rejected it).
However, as further discussion shows, there was more meat on the question than at first appeared
But you are quite wrong with regards to moderator action regarding points. If a question is a FAQ for example, then awarded points will be removed. If an answer violates the rules of the forum, points will be removed. If a user has violated the rules to an extent that they may be about to deleted, as final sanction points may be removed. If members try to cheat the point system, they'll have points remvoed.
Moderators do considerably more than monitor forums for silliness and abuse.
If you have a complaint about moderator action, please raise it in the suggestions and comment forum. We don't always get it right, and we are open to discussion.
matt
Edited by: Matt on Jul 30, 2011 7:03 AM

Create attachment in equipment master data

Helio expert,
The sub menu of the 'service of object' - create is gray, (Tcode IE02) which means that it is impossibe to create attachment, create note etc.
What can I do for make those actions active ?
Thanks,
Eli
Edited by: eli dom on May 17, 2010 8:03 PM

Hi
Go to the t code SGOS there enter the object 'CREATE_ATTA' and make it active and check whether create is getting activated. hope this helps. Check this object also 'PCATTA_CREA', revert with your comment. For more details check the SAP help
http://help.sap.com/saphelp_47x200/helpdata/en/1f/370b374e4e7c64e10000009b38f839/frameset.htm
Generic Object Services
reagrds
ramakant
Edited by: ramakant shekapure on May 18, 2010 8:39 AM

Read document attached to master data value

Hello.
I'm using FM RSOD_DOC_MAST_CHANGE to attach files to master data values. But I don't know how to read attached document(( Does anybody know?

Hi.
Take a look at [following thread|Document read functionality;.
Regards.

Attaching document in the Asset master data

Hi All,
If want to attach the supporting document in asset master data, i.e in AS02, AS03 what are the steps that we need to follow to implement this in SAP?
Also while doing asset transfer, how can we transfer the attached documents?
Please provide inputs.
Regards,
Jayasudha

Hi ,
Below is the configuration steps
Have defined a content repository (IMG activity Maintain Content Repositories, transaction OAC0)
Â· Have maintained document types with the status "active" (IMG activity Maintain document types, transaction OAC2).
Â· Have defined Relationships for your object type with the status "active" (IMG activity Maintain relationships transaction OAC3)
Procedure
Then if you check the service object in AS02 it will be in active status.
Regards,
Jayasudha

PA30, attaching documents through the employee personal master data

Hi,
We want to add documents to a pernr in PA30 via Extra -> assign original. We configured the archive link but it asks for "Bar Code Entry" when we want to add an document. In http://help.sap.com/saphelp_erp60_sp/helpdata/en/d7/e2270b408e11d1896b0000e8322d00/content.htm they say However, it is also technically possible to store without a bar code (that is, you can use the "assign then store" scenario). But I don't find the information to do it. Please can somebody assist?
Br
Steven

Check with below url ...you have different options..
[http://help.sap.com/saphelp_47x200/helpdata/en/48/35d4ad4abf11d18a0f0000e816ae6e/frameset.htm]
You can also try in PA30....Click on Services for Object besides Maintain HR Master Data name.....Create...Create Attachment.
Mohan

PA30, attaching documents through the employee personal master dat

Dear freinds,
We are attaching documents through the employee personal master data
PA30, Our client wants to know where exactly these attachments are
getting saved; Our SAP environment is ECC6.0 on AIX 5.3. so i exactly would like to know what is the exact path where these documents are getting saved on AIX machine.
I would appreciate if you can tell us where exactly these documents are
getting saved at OS level, any particular file system you think,
because I probed in but couldnu2019t find where exactly there are on the
OS..
Regards
ayush

hello,
SAP generally recommends that you store employee documents with a bar code. You can find the documentation to 'Storage Within Personnel Administration' using the following path:
=> Help => SAP Library => Human Resources => Personnel Management (PA)=> Personnel Administration (PA-PA) => Storage Within Personnel Administration (PA-PA)
In the SAP Standard it is not possible to tie original documents to specific personnel numbers in the PA30 transaction. The only exceptions are two specific scenarios where you can tie original documents in the PA30 transaction:
1. late storing with bar code
2. late storing without bar code
During both scenarios you start out in the Trx PA30. If the bar code entry is deactivated the actual key data will have to be transferred to the document in any case, otherwise you will be asked to enter a barcode again. Therefore the document would be transferred to the scanning location and then assigned to a specific business object.
Unfortunately it is NOT possible to upload a document directly into archive in the PA30 any other way.
Let me emphasize once more that PA30 can not be used for storing infotype specific documents. Via the special scenarios mentioned already by my colleague you are able to assign documents to the specific infotypes but the storing has to be completed outside of PA30.
Using the option Extras -> Assign facsimile in PA30 will be interpreted by the system as start for late scanning with barcode thus the error message.
Hope this help
Sarah

Urgent: Doc's Related to Master DATA

Hi,
Can any send me doc's or links related to FINANCE MASTER DATA.
To Send doc's pls email to [email protected]
Thanks In Advance,
Vinay MK

Hello
What doc's are required?
there are GL master data, vendor master data, customer master data, asset master data, bank master data.
Each can be created with various options.
From legacy to SAP it is advised to upload mass master data.
The transaction data can be uploaded seperately after the master data is created.
reg
*assign points if useful

Problem while attaching master data source to generic datasource

Hi All,
I have created a generic datasource using three tables in crm systems. the tables are CMSD_CB, CMAD_LO_PRICE AND CMSD_LO_QUANT.
i have loaded data to bw system and want to attach 0ORGUNIT master datasource to the generic datasource. so that i can get 0ORGUNIT hierarchy and sales grp/office details.
could some one help how to solve this problem.
Thanks in advance.
Thanks,
Mahantesh

You don't have to attach the master data datasource to your generic datasource.
Master data is loaded separately from transaction data, so you will see your hierarchy from the moment you loaded it with the 0ORGUNIT hierarchy datasource into your infoobject 0ORGUNIT.

Using DTW to update the Item Master Data attachment tab

Hi Experts,
Has anyone tried using DTW to update the Attachments Tab on the Item Master Data please? I tried a few things (similar to importing an attachment to an activity) and couldn't get it to work.
I couldn't see that anything to do with the Attachments Tab was exposed in DTW when looking at the mapping fields and also when looking through the options available in the Items Object under Customize Templates - but then I might not be seeing it correctly!
Any ideas or solutions would be great.
Many thanks,
Caroline

Hi Caroline,
AtcEntry is correct for the document, this relates to the AbsEntry in OATC, which then in turn links to AbsEntry in ATC1.
There are a few fields that need to be populated in ATC1:
AbsEntry
Line - To be used if more than 1 Attachment
SrcPath - for the file path
Filename - for the file name
FileExt - for file type - i.e. .pdf
You may be able to configure DTW to import these as a manually created DTW but I suspect that OATC and ATC1 are not open to the Di which will stop it. Coincidently I have been looking at Task Centre to update these but have encountered the same problem
Regards
Sean Martin

MM: MIR7: How to display vendor master data "bank code" in the invoice doc.

Hi all,
I would like to display the bank code of the vendor in the header screen of the invoice. At the moment only the name of the bank is visible. Is there a possibility in the customizing to modify the screen of transaction code MIR7? I do not want to make a modification to the SAP Standard.
Many thanks in advance.
Regards,
Max

Hi,
You can use custom validation program (Z*) by copying standard validation (RGGBR000) program.
Modify the validation program to check table vendor master data.
After that, you need to assign this custom validation program to GBLR application area in GCX2.
Thanks

Master data to SD docs

Hi friends,
where are the controls and how do we know, what all data will be copied from master data to sales documents.

Hi Samatha,
               These are all the Master data avail in the SD
1.Customer Material Info record.
2.Customer Master record.
3.Material master record.
4.Condition master data
Other than these master data we will get the some data into sales document through.
     1.Cofiguration data.
     2.Preceding documents.
     3.System giving data, all together will come while creating sales orders.
When you want to create a sales order
1.you need to enter the order type that will come through configuration.
2.You need to enter the sales area that will come based on the configuration.
3.you need to enter Customer that will come from Customer master.
           Data from customer master:- Address of the customer,Ship-to-party,Tax,Payment terms,Inco terms,shipping conditions,delivery priority,Currency, partner functions etc.....
4.You need to enter Material that will come from the Material master.
         Data from Material master :- Net wight,gross weight,Tax,material group,Loading group,sales Unit Of Measure,Material cost price etc.........
5.When you enter Customer and Material,the Customer material name will come in the order from the Customer material info record if you have Customer material info
6.After entering the material in the order price will be determined based on the pricing configuration and condition records.
7.The completion of the document will be again based in the Incompletion procedure configuration.
Mainly the master data will be controled in SD by the Sales area (Sales organisationDivisiondistribution channel)
You can maintain different master data based on the sales area
I hope it will help you
Thanks,
Murali.

Which Master data Source is available for the field VBUK-GBSTK (Doc Status)

Hi
Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
Please help me.
Thanks
Mannev.

Hi
Thanks for your reply.
That is Transaction data source. I want master data source.
Thanks,
Mannev.

End User Doc. Create / Change Customer Master Data

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi Experts,
I would appreciate, if anyone of you could forward me the end user documents for creating & changing customer master data.
sonicasmailbox at rediff
Points will be assigned.
Regards
Sonica

Hi
Refer to help.sap.com for creating customer master data.
Copy this to word document and it will be become user manual.
http://help.sap.com/saphelp_ides/helpdata/en/47/ef8c64124811d2806f0000e8a495b3/content.htm
Additionally refer to this weblink
http://web.mit.edu/cao/www/AR/ar1/ar_FD01.htm - This if for FICO only.
Changing customer master record.
Use T.Code XD02.
Enter Customer No,Company code,Sales Org, Distribution channel and division and press Enter or
Enter Customer no,company code and click on customer's sales area, you will see Sales Org, Distribution channel and division,select the Sales org,Sales Org, Distribution channel and division and press enter.
You can make necessary changes to customer master
Please let me know if you need more information.
Asssign points if useful.
Regards
Sridhar M

GR Doc & GR Slip Printing for materials without master data

We need to print the GR document, GR Slip for materials which doesn't have the master data ( Ex: Materials with long text, material group maintained).
Kindly let me know the requirements for executing this task.

For printing GR slips we need to maintain a few fields in the master data for the material. In case of materials without master data, these fields will not be maintained. So, in this case, how to print the GR Slips is the clarification whcih I would like to have.

Attaching docs in master data

Similar Messages

Maybe you are looking for