Attaching document in the Asset master data
Hi All,
If want to attach the supporting document in asset master data, i.e in AS02, AS03 what are the steps that we need to follow to implement this in SAP?
Also while doing asset transfer, how can we transfer the attached documents?
Please provide inputs.
Regards,
Jayasudha
Hi ,
Below is the configuration steps
Have defined a content repository (IMG activity Maintain Content Repositories, transaction OAC0)
· Have maintained document types with the status "active" (IMG activity Maintain document types, transaction OAC2).
· Have defined Relationships for your object type with the status "active" (IMG activity Maintain relationships transaction OAC3)
Procedure
Then if you check the service object in AS02 it will be in active status.
Regards,
Jayasudha
Similar Messages
-
Displaying Evaluation groups field in the asset master data
Dears,
The Evaluation group fields in the allocation tab in the asset master data was not displayed in the layout, is there is any harm of displaying it in the production system after 3 years from Go-live.
i think it should not make any harm, i just want to confirm.
Regards,
Ahmed SamirSalam Ahmed
There is no harm.. These fields are used for reportng. They dont impact the process in any way
Br, Ajay M -
How to activate fields under origin tab in the asset master data
Hello Gururs,
While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new. 2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
regds
RamachandraHello Markus ,
Thanks for your reply. I checked through Group box info then system is showing the following message .
status - DISPLAY
Reason - Authorization for asset view used
In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
regds
ramachandra -
How to update the New Depreciation Area in Asset Master Data
Hi,
Please guide me
How to update the New Depreciation Area in the Asset Master Data.
Regards
SrinivasHi,
a) The procedure is as follows:
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program
RAFABNEW :
3.1 Indicator: Leave values initial = not ticked.
Do not set this indicator if you want the system
to copy the values from depreciation area 01.
3.2 Indicator: Leave values initial = ticked.
Set this indicator if you want to open the newly created
depreciation area without any values i.e. blank.
4. Recalculate depreciation via AFAR and program RAAFAR00.
b) Helpful notes:
430618 (Procedure for setting up new depreciation area)
301113 (Restrictions of RAFABNEW)
421549 (RAFABNEW: Error with closed fiscal years)
c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
regards Bernhard -
Getting Segment in the Asset Master ( Using SEGMENT Badi and not Prt Ctrs)
Hi,
We need the field Segment to be populated in the Asset Master to get the correct P&L Statements ( The depreciation run, retirements etc to post to the Segments) . We are using the segment Badi: FAGL_DERIVE_SEGMENT to derive Segments and NOT the Profit Centers
However, the field Segment missing in Asset Master (Class). The field segment is missing the Time Dependent view while creating the Asset Master Data. This is so because in the Configuration of Asset Accounting --> Integration with GL --> Additional Account
Assignment Objects is not showing the Segment field.
According to SAP help, I CAN DO THIS as mentioned
http://help.sap.com/erp2005_ehp_05/helpdata/en/94/f13167dbae436a85a4a1d3ad75f274/frameset.htm
But, as mentioned in the SAP help link above, I am not able to find " Activate segment reporting in
Customizing for Asset Accounting under Integration with General
Ledger --> Accounting Segment Reporting --> Activate Segment Reporting"
Also, from another SAP Help link
http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/fb/84a48d665e4fa9a2dc7b60adeb7c7d/frameset.htm
I found that activation of Business Function FIN_GL_REORG_1
or FIN_REP_SIMPL_3 could also get us the Segment Field in the Asset
Master Data's Time Dependent Field
However, when I goto Transaction SFW5 - Change Business Function Statuswe are not able to find these Business Functions (FIN_GL_REORG_1
or FIN_REP_SIMPL_3 )
Regards
KSHi, Activate segment reporting is available only in EHP5.
If you'renot using EHP5, then you can't to update segment as well as profit center in asset master data.
The only way is to put co objects in asset master data, and derive PC,segment based on this co objects -
How to add new fields in asset master data
Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
PedroHi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur -
Man/Assessed val.ind in the net worth tax tab of the Asset Master.
Hi Friends,
Checkbox Indicator:Manl net worth tax val. field in the Net worth tax tab is optional in the screen layout rules for an Asset class. But the Check box is not appearing before the manual networth value field in the Asset master data. Could you please through some light on this why it is not appearing in the Asset Master even it is optional in the screen layout rules.
Thanks and Regards
Koteswararao PadartiHi Bernhard,
First of all thanks for your response. The maintenance level in the screen layout is at Main Asset number. Just for understanding, Even if the maintenance level is at Asset class level only the default values should flow to the master and it should be modifible at Asset Master level.
In My case the maintenance level is at Asset Main number level, but still it is not appearing. Please let me know is there any thing else can effect this field status?
Thanks and Regards
Koteswararao Padarti -
Depreciation area set in Asset Class does not appear in asset master data
Depreciation area does not appear in the asset master data however it is set in the Asset class. If other asset is created in the same Asset class that depreciation area is automatically set in the asset master (it proofs that it is not a problem with Asset class).
I tried to set that deprecition area directly in the asset master data but all the fields are blocked for changing (is it possible to change that?).
What should I do as I need to post on that area ?
Thank you,
JeanOk Zaid! thanks,
But what treatment should I give to that asset? Because now it is not being evaluated in that area but we need to do it.
The asset was created in the prior exercise (year).
Regards,
Jean -
Quantity purchased via PO is not updating the master data of the newly created fixed assets.
When created and inserted into any number, the amount is updated with the purchase.
What do you make the purchase of newly created assets are properly updated in the asset master data?
GLippmannThe SAP Notes instrctions solved the problem.
Thank you mvery much.
Best Regards...
GLippmann -
PA30, attaching documents through the employee personal master dat
Dear freinds,
We are attaching documents through the employee personal master data
PA30, Our client wants to know where exactly these attachments are
getting saved; Our SAP environment is ECC6.0 on AIX 5.3. so i exactly would like to know what is the exact path where these documents are getting saved on AIX machine.
I would appreciate if you can tell us where exactly these documents are
getting saved at OS level, any particular file system you think,
because I probed in but couldnu2019t find where exactly there are on the
OS..
Regards
ayushhello,
SAP generally recommends that you store employee documents with a bar code. You can find the documentation to 'Storage Within Personnel Administration' using the following path:
=> Help => SAP Library => Human Resources => Personnel Management (PA)=> Personnel Administration (PA-PA) => Storage Within Personnel Administration (PA-PA)
In the SAP Standard it is not possible to tie original documents to specific personnel numbers in the PA30 transaction. The only exceptions are two specific scenarios where you can tie original documents in the PA30 transaction:
1. late storing with bar code
2. late storing without bar code
During both scenarios you start out in the Trx PA30. If the bar code entry is deactivated the actual key data will have to be transferred to the document in any case, otherwise you will be asked to enter a barcode again. Therefore the document would be transferred to the scanning location and then assigned to a specific business object.
Unfortunately it is NOT possible to upload a document directly into archive in the PA30 any other way.
Let me emphasize once more that PA30 can not be used for storing infotype specific documents. Via the special scenarios mentioned already by my colleague you are able to assign documents to the specific infotypes but the storing has to be completed outside of PA30.
Using the option Extras -> Assign facsimile in PA30 will be interpreted by the system as start for late scanning with barcode thus the error message.
Hope this help
Sarah -
Using DTW to update the Item Master Data attachment tab
Hi Experts,
Has anyone tried using DTW to update the Attachments Tab on the Item Master Data please? I tried a few things (similar to importing an attachment to an activity) and couldn't get it to work.
I couldn't see that anything to do with the Attachments Tab was exposed in DTW when looking at the mapping fields and also when looking through the options available in the Items Object under Customize Templates - but then I might not be seeing it correctly!
Any ideas or solutions would be great.
Many thanks,
CarolineHi Caroline,
AtcEntry is correct for the document, this relates to the AbsEntry in OATC, which then in turn links to AbsEntry in ATC1.
There are a few fields that need to be populated in ATC1:
AbsEntry
Line - To be used if more than 1 Attachment
SrcPath - for the file path
Filename - for the file name
FileExt - for file type - i.e. .pdf
You may be able to configure DTW to import these as a manually created DTW but I suspect that OATC and ATC1 are not open to the Di which will stop it. Coincidently I have been looking at Task Centre to update these but have encountered the same problem
Regards
Sean Martin -
Upgrade the DB from 2007A to 8.8 PL 10- Error in Fixed Assets Master Data
Dear Expert,
we r using smoothly Fixed Assets Add-on in 2007A environment, Now we are upgrade to SAP B1 8.8 SP00 PL10. When i view the Fixed Assets Master Data by choosing from List Its shows all of my master data list, but when i select any of them system shown nothing in FA Master Data form , please guide
TahirHi,
I think the addon is corrupted. have you reinstall B1 addon ? if you have reinstalled but it is still as same, I suggest to upgrade the B1 version and the addon to the latest i.e. SAp B1 8.8 SP00 PL16. You can also log a message to SAP support but test this case first in the SAP B1 8.8 SP00 PL16 environment.
JimM -
hi sap gurus,
i have a problem regarding saving of asset master data.
while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
you cannot save the asset(correct depreciation error)
Diagnosis: you have choosen the function save.the system found an
internal problem when calculating depreciation for a check document.
sys responce:The asset cannot be created
procedure:1 check the error from depreciation calculation by
performing the function "Test doc.'again.
2 if you cannot correct the error ,contact your sys specialist.you
must then cancel your current processing.
please help me regarding the problem......hi
check your depreciation area settings for the asset class -
User Exit - Create Asset Master Data from MIGO
Hi Experts,
I want to create an asset master data from Good Receipt Purchase Order, when the user saves the document, but I didn't find none user exit, BADI or BAPI that I can use.
Cuold you help me?
Thank a lot.
Kind Regards
GiampaoloHi,
Why you want to create the Asset master at the time of MIGO.
Posting MIGO is end user activities and Creation of Asset is of Super User, he have to assign cost center plant etc in master which will not be known by the end user and can create lot of problem in later stage.
If we create Asset it MIGO or PO level how user know that he have to post to new asset or to existing asset. This decision is of Finance person.
If it is that important in your business process then give the authorization of Asset Master data creation to User.
I personally feel this requirement is not feasible.
Regards,
Shayam -
Reference a document in the material master
I'm wondering if anyone can suggest a way that we can do the following....
We basically want to have a field/location in the Material Master that will reference a document stored somewhere on a network server and in turn, display and print on the PO (the document name prints, not the contents). Any suggestions of where to start?
So in the MM for Material # 123456
MyField = "MyInspectionDoc.pdf" (MyInspectionDoc.pdx resides on \\mynetworkserver\MyInspectionDoc.pdf)
Or
Is there a way to have an attachment in the MM that will automatically be pulled into the PO when the PO is created (with the material item as a line item in the PO of course)I think you are mixing DMS (document management) with GOS (generic object services)
GOS content is created as shown in your screen shots.
You cannot even see from any transaction which materials have a GOS attachment. The GOS attachment can only be accessed from the object (material master) where it was created.
DMS is a central component in SAP and embedded to the material master like it is done with classification too.
You can create the documents in CV01N transaction and link to the material or directly from material master. you can use CV04N to search for documents
In the material master you will find the link to the document in alternative data tab where you have as well your alternative units.
This screen looks like this one:
Those material master attachments/documents do not print automatically in a PO, for this you have to do some ABAP development
Maybe you are looking for
-
Vi works in LabVIEW, but not when executed by TestStand.
Hi everybody. I'm using LabVIEW 8 with the Sound and Vibration Toolkit, and TestStand2. I am planning on using TestStand to execute a series of performance tests on an audio processing board. When run independently, the vi (which I have attached h
-
Regarding Receiver Communication Channel (Concurrency problem)
Hi Masters , In Receiver Communication Channel which is connected to oracle data base ..while updating records Status from N to C . i am getting following errors : **Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Cha
-
Is it possible to load and send variables to php at the same time?
Hello, with this line: request.method = URLRequestMethod.GET; you can receive variables from php. and with request.method = URLRequestMethod.POST you can send variables. But is it possible to do this simultaniously ?
-
I have been prompted to update my payment info on iCloud but can't see where to do it!
When I go into settings > account info - I follow the payment info prompt but am led to a screen that gives info on account verification but nowhere to actually do that. I cant see where I am supposed to a) update payment info or b) do the verificati
-
Fundamental spatial coordinate systems. WGS84 vs RA/DEC
Hi, I have some sort of fundamental question about the Oracle Spatial feature and its coordinate model. As far as I am aware of, Oracle use WGS84 coordinate reference but I am pretty much interested on RA/DEC. RA/DEC are used for astronomy as a refer