Attaching line to a rectangle & repeating lines

Hi,
In the attached image, how would you attached the two orange lines to the orange rectangle? Using Pathfinder/Unite doesn't work not does try to add a point from the corner.
Also, what is the tool and how do you use it to create the repeating blue lines and have them all line up?
Thanks!

bf,
If you wish to keep them as stroked paths, you may consider whether simply Grouping them will do what you need, or making a Compound Path (this will give them an invisible fill).
And what imagecollection said.

Similar Messages

Intersection point of rectangle and line

So I have a point somewhere on the scene and from that point a line is drawn to the center of the rectangle. Is there a way I can find the point of intersection between the rectangle and the line? Thanks!

PhiLho wrote:
abedi_ali wrote:
For that model I would need to know if the point is on top line of the rectangle, left line ,right, or bottom.Yes. Makes sense.
However it would be much simpler if there is a way to find that intersection point.The way is the one you just described. Unless you mean a way built-in in JavaFX? The Shape classes have intersects() methods, but they just return a boolean...Yes thats what I figured. I guess my only option is to section it off. Thanks!

When browsing a new library that I created, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle the image appears. How do I get images to appear in the browser rectangles?

When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?

You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
Then check, if you now are able to read the library properly on your iMac.
Regards
Léonie

Changing Thickness of Lines Created with Rectangle Tool in CS2?

I am trying to change the thickness of the lines for a rectangle drawn using the Rectangle Tool in Photoshop CS2.
I can not figure out how to change the thickness of the lines of the four sides of the rectangle before I draw the rectangle using the Rectangle Tool or after the Rectangle has been drawn. The same problem seems to occur when using the Polygon Tool, Ellispse Tool, etc.
I can transform the rectangle to make it bigger or smaller, etc. but it seems like I should be able to vary the thickness of the lines for a rectangle.
Is this task possible in Photoshop? It's simple in Illustrator - this seems like it should be a pretty simple task in P-shop. I have looked on Google and in Help for P-shop CS2 for an answer but can not locate a solution. Am I not seeing something really obvious?
Any help is greatly appeciated.
Thanks!

Hi,
Thanks for your reply.
I am making a path. That said, in Photoshop CS2 I don't see where I can select a brush size once I have selected the Rectangle Tool to increase the desired thickness or weight of the path for that rectangle. Since I am creating a path why would I use/select a brush size? I have attached a screen shot which shows what I am seeing when I select the Rectangle Tool and attempt to change the thickness of the path. The attached image aslo shows what I am trying to accomplish. I don't see where I can select the weight or thickness - even when I right-click with the mouse, etc. Even if I try to change the Style from the Option bar it seems overly complex for such a simple task.
When using the Line Tool in Photoshop CS2 you do have an option to change the line thickness or weight but when I click on the Rectangle Tool that option for changing the the line thickness or weight disappears.
I realize P-shop CS2 isn't specically designed for drawing, like Illustrator, but what I am trying seems simple.
Any other suggestions would be greatly appreciated.
Thanks for your time!

Last Line Item in Report Repeating on Next Page

The last line of data of every page is also the first line on the next page. I have not encountered this before and I cannot see how it is happening or how to correct it.
The report has three groups and the 3rd group has 3 details lines. It is the 2nd detail line that repeats. The repeating line has not encountered a group change, nor has the 3rd detail line been triggered. It is a simple report that lists a line of data and prints it onto the report.
The SQL is grouped by the same grouping of the report. Yes, data does repeat in the SQL, which would be expected for the grouping. However, the data does not repeat in a group of the data returned by the SQL statement, so there is no reason for this data repetition.
It is not restricted to any one piece of data in the report. The line that repeats is the last line on a page. Clicking on the next page of the report shows the last line of the previous page is the first line of the new page. This is true whether the report is viewed or printed.
Does anybody have any suggestions?
Thank you.

I was able to resolve this. The detail section did not have the Keep Together checked. Once this was checked, the repeating line issue was resolved.

Specifying the exact size of a rectangle or line - Adobe Acrobat Professional 8

I am making a few modifications to an existing document of a scale drawing (1mm to 300mm).
When using the Line Tool or Rectangle Tool Is it possible to draw a line or rectangle to be an exact size on the drawing. Is there a way to specify the exact dimension's you'd like something to be? For example, is there a way for me to draw a box with the exact dimensions 300mm by 500mm?

Hello Michal,
I tried your solution 1. I un-installed both Reader 7.0.8 and Professional 8.0.
Then I re-installed Reader 7.0.8.
Then I re-installed Professional 8.0, but no where during installtion process did it ask me if Professional 8.0 should be default to open PDF files. By default it set it to open PDF files. Now I'm back to original problem.
Solution 2 still works (i.e. open Reader 7.0.8) before opening the URL in web browser (then it opens in Reader 7.0.8).
But we want a permanent solution.
Please help.
Thanks,
Vimukta

Line in a Rectangle

All,
I have a line and a rectangle.
Now I want to find whether this line passes through the Rectangle and if "yes" where does it intersect with the rectangle.
Please note that "Performance" matters me the most. So for example I just can't go and check every point in the line is within a rectangle or not.
Thanks,
Jana

http://forum.java.sun.com/thread.jsp?forum=57&thread=413517
found with
http://search.java.sun.com/search/java/index.jsp?qp=&nh=10&qt=%2Bline+%2Bintersects+%2Brectangle&col=javaforums

How to make one rectangle box line curved

Hello:
have started using Illustrator and love it but am unsure of how to do something. What I have done is create a basic business card that has a white background. I would like the bottom half of the card to be a different colour so I added a block of blue using the rectangle tool. That looks great but I would like the top line of the rectangle, which is in the middle of the card, to be in a wave like shape.
How does one do that please ? Thank you.

Effect >> Distort And Transform >> Zig Zag
Make a rectangle shape for your mask
Select the rectangle and the wave. Command 7 (Ctrl 7 on windows)to make a mask

Repeat Line item prints on every new page of smart form of Service PO

Dear Sir,
I am facing following Problem & need abaper help.
example:-
PO type is Service
Line item 10. Transportation 1 AU
under this activities
          01. Transportaion by Tree wheeler 3 Rs/ KM
          02. Transportaion by Four wheeler 8 Rs/ KM
          03. Transportaion by Heavy vehical 10 Rs/ KM
Line item 20      Errection     1 AU
Sub services are,
        01. Errection of Boiler   200 RS/Hr
Like this way
Now I am seeing Print Preeview
Suppose line item 20 come in second page , in this case system copies sub services of firs line item
example : - system shows line item 20 in second page as shown below which is wrong.
Line item 20      Errection     1 AU
           01. Transportaion by Tree wheeler 3 Rs/ KM
          02. Transportaion by Four wheeler 8 Rs/ KM
          03. Transportaion by Heavy vehical 10 Rs/ KM
Pls, suggest where I need to change.
Regards,
Ravi

hi ,
i think you are not clearing the Barcode variable once it has printed.
try declaring the variable like this in smartform,
BARCODE     TYPE     CHAR24
when one loop excecutes .and end of loop in command line clear this variable.
thanks & regards,
kat.

Error in .oci.GetQuery(conn, statement, ...) :    ORA-29400: data cartridge error ORA-24323: ????? ORA-06512: at "RQSYS.RQTABLEEVALIMPL", line 24 ORA-06512: at line 4

Hi,everyone,
            I had installed R Enterprise in my Oracle 11.2.0.1 base on win7,using the R 2.13.2, ORE 1.1, 　Ｉ can using the part function: like
library(ORE)
options(STERM='iESS', str.dendrogram.last="'", editor='emacsclient.exe', show.error.locations=TRUE)
> ore.connect(user = "RQUSER",password = "RQUSERpsw",conn_string = "", all = TRUE)
> ore.is.connected()
[1] TRUE
> ore.ls()
[1] "IRIS_TABLE"
> demo(package = "ORE")
Demos in package 'ORE':
aggregate               Aggregation
analysis                Basic analysis & data processing operations
basic                   Basic connectivity to database
binning                 Binning logic
columnfns               Column functions
cor                     Correlation matrix
crosstab                Frequency cross tabulations
derived                 Handling of derived columns
distributions           Distribution, density, and quantile functions
do_eval                 Embedded R processing
freqanalysis            Frequency cross tabulations
graphics                Demonstrates visual analysis
group_apply             Embedded R processing by group
hypothesis              Hyphothesis testing functions
matrix                  Matrix related operations
nulls                   Handling of NULL in SQL vs. NA in R
push_pull               RDBMS <-> R data transfer
rank                    Attributed-based ranking of observations
reg                     Ordinary least squares linear regression
row_apply               Embedded R processing by row chunks
sql_like                Mapping of R to SQL commands
stepwise                Stepwise OLS linear regression
summary                 Summary functionality
table_apply             Embedded R processing of entire table
> demo("aggregate",package = "ORE")
demo(aggregate)
---- ~~~~~~~~~
Type <Return> to start : Return
> #
> #     O R A C L E R E N T E R P R I S E S A M P L E   L I B R A R Y
> #
> #     Name: aggregate.R
> #     Description: Demonstrates aggregations
> #     See also summary.R
> #
> #
> #
>
> ## Set page width
> options(width = 80)
> # List all accessible tables and views in the Oracle database
> ore.ls()
[1] "IRIS_TABLE"
> # Create a new table called IRIS_TABLE in the Oracle database
> # using the built-in iris data.frame
>
> # First remove previously created IRIS_TABLE objects from the
> # global environment and the database
> if (exists("IRIS_TABLE", globalenv(), inherits = FALSE))
+     rm("IRIS_TABLE", envir = globalenv())
> ore.drop(table = "IRIS_TABLE")
> # Create the table
> ore.create(iris, table = "IRIS_TABLE")
> # Show the updated list of accessible table and views
> ore.ls()
[1] "IRIS_TABLE"
> # Display the class of IRIS_TABLE and where it can be found in
> # the search path
> class(IRIS_TABLE)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> search()
[1] ".GlobalEnv"          "ore:RQUSER"          "ESSR"
[4] "package:ORE"         "package:ORExml"      "package:OREeda"
[7] "package:OREgraphics" "package:OREstats"    "package:MASS"
[10] "package:OREbase"     "package:ROracle"     "package:DBI"
[13] "package:stats"       "package:graphics"    "package:grDevices"
[16] "package:utils"       "package:datasets"    "package:methods"
[19] "Autoloads"           "package:base"
> find("IRIS_TABLE")
[1] "ore:RQUSER"
> # Select count(Petal.Length) group by species
> x = aggregate(IRIS_TABLE$Petal.Length,
+               by = list(species = IRIS_TABLE$Species),
+               FUN = length)
> class(x)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> x
     species x
1     setosa 50
2 versicolor 50
3 virginica 50
> # Repeat FUN = summary, mean, min, max, sd, median, IQR
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = summary)
     species Min. 1st Qu. Median Mean 3rd Qu. Max. NA's
1     setosa 1.0     1.4   1.50 1.462   1.575 1.9    0
2 versicolor 3.0     4.0   4.35 4.260   4.600 5.1    0
3 virginica 4.5     5.1   5.55 5.552   5.875 6.9    0
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = mean)
     species     x
1     setosa 1.462
2 versicolor 4.260
3 virginica 5.552
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = min)
     species   x
1     setosa 1.0
2 versicolor 3.0
3 virginica 4.5
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = max)
     species   x
1     setosa 1.9
2 versicolor 5.1
3 virginica 6.9
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = sd)
     species         x
1     setosa 0.1736640
2 versicolor 0.4699110
3 virginica 0.5518947
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = median)
     species    x
1     setosa 1.50
2 versicolor 4.35
3 virginica 5.55
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+           FUN = IQR)
     species     x
1     setosa 0.175
2 versicolor 0.600
3 virginica 0.775
> # More than one grouping column
> x = aggregate(IRIS_TABLE$Petal.Length,
+               by = list(species = IRIS_TABLE$Species,
+                         width = IRIS_TABLE$Petal.Width),
+               FUN = length)
> x
      species width x
1      setosa   0.1 5
2      setosa   0.2 29
3      setosa   0.3 7
4      setosa   0.4 7
5      setosa   0.5 1
6      setosa   0.6 1
7 versicolor   1.0 7
8 versicolor   1.1 3
9 versicolor   1.2 5
10 versicolor   1.3 13
11 versicolor   1.4 7
12 virginica   1.4 1
13 versicolor   1.5 10
14 virginica   1.5 2
15 versicolor   1.6 3
16 virginica   1.6 1
17 versicolor   1.7 1
18 virginica   1.7 1
19 versicolor   1.8 1
20 virginica   1.8 11
21 virginica   1.9 5
22 virginica   2.0 6
23 virginica   2.1 6
24 virginica   2.2 3
25 virginica   2.3 8
26 virginica   2.4 3
27 virginica   2.5 3
> # Sort the result by ascending value of count
> ore.sort(data = x, by = "x")
      species width x
1   virginica   1.4 1
2   virginica   1.7 1
3 versicolor   1.7 1
4   virginica   1.6 1
5      setosa   0.5 1
6      setosa   0.6 1
7 versicolor   1.8 1
8   virginica   1.5 2
9 versicolor   1.1 3
10 virginica   2.4 3
11 virginica   2.5 3
12 virginica   2.2 3
13 versicolor   1.6 3
14     setosa   0.1 5
15 virginica   1.9 5
16 versicolor   1.2 5
17 virginica   2.0 6
18 virginica   2.1 6
19     setosa   0.3 7
20 versicolor   1.4 7
21     setosa   0.4 7
22 versicolor   1.0 7
23 virginica   2.3 8
24 versicolor   1.5 10
25 virginica   1.8 11
26 versicolor   1.3 13
27     setosa   0.2 29
> # by descending value
> ore.sort(data = x, by = "x", reverse = TRUE)
      species width x
1      setosa   0.2 29
2 versicolor   1.3 13
3   virginica   1.8 11
4 versicolor   1.5 10
5   virginica   2.3 8
6      setosa   0.4 7
7      setosa   0.3 7
8 versicolor   1.0 7
9 versicolor   1.4 7
10 virginica   2.1 6
11 virginica   2.0 6
12 virginica   1.9 5
13 versicolor   1.2 5
14     setosa   0.1 5
15 versicolor   1.6 3
16 versicolor   1.1 3
17 virginica   2.4 3
18 virginica   2.5 3
19 virginica   2.2 3
20 virginica   1.5 2
21 virginica   1.6 1
22 virginica   1.4 1
23     setosa   0.6 1
24     setosa   0.5 1
25 versicolor   1.8 1
26 virginica   1.7 1
27 versicolor   1.7 1
> # Preserve just 1 row for duplicate x's
> ore.sort(data = x, by = "x", unique.keys = TRUE)
      species width x
1      setosa   0.5 1
2   virginica   1.5 2
3 versicolor   1.1 3
4      setosa   0.1 5
5   virginica   2.0 6
6      setosa   0.3 7
7   virginica   2.3 8
8 versicolor   1.5 10
9   virginica   1.8 11
10 versicolor   1.3 13
11     setosa   0.2 29
> ore.sort(data = x, by = "x", unique.keys = TRUE, unique.data = TRUE)
      species width x
1      setosa   0.5 1
2   virginica   1.5 2
3 versicolor   1.1 3
4      setosa   0.1 5
5   virginica   2.0 6
6      setosa   0.3 7
7   virginica   2.3 8
8 versicolor   1.5 10
9   virginica   1.8 11
10 versicolor   1.3 13
11     setosa   0.2 29
but    when I use the following The ore.doEval command get the errors,
> ore.doEval(function() { 123 })
Error in .oci.GetQuery(conn, statement, ...) :
ORA-29400: data cartridge error
ORA-24323: ?????
ORA-06512: at "RQSYS.RQEVALIMPL", line 23
ORA-06512: at line 4
and I try to run the        demo("row_apply", package="ORE") get the same errors:
demo("row_apply",package = "ORE")
demo(row_apply)
---- ~~~~~~~~~
Type <Return> to start : Return
> #
> #     O R A C L E R E N T E R P R I S E S A M P L E   L I B R A R Y
> #
> #     Name: row_apply.R
> #     Description: Execute R code on each row
> #
> #
>
> ## Set page width
> options(width = 80)
> # List all accessible tables and views in the Oracle database
> ore.ls()
[1] "IRIS_TABLE"
> # Create a new table called IRIS_TABLE in the Oracle database
> # using the built-in iris data.frame
>
> # First remove previously created IRIS_TABLE objects from the
> # global environment and the database
> if (exists("IRIS_TABLE", globalenv(), inherits = FALSE))
+     rm("IRIS_TABLE", envir = globalenv())
> ore.drop(table = "IRIS_TABLE")
> # Create the table
> ore.create(iris, table = "IRIS_TABLE")
> # Show the updated list of accessible table and views
> ore.ls()
[1] "IRIS_TABLE"
> # Display the class of IRIS_TABLE and where it can be found in
> # the search path
> class(IRIS_TABLE)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> search()
[1] ".GlobalEnv"          "ore:RQUSER"          "ESSR"
[4] "package:ORE"         "package:ORExml"      "package:OREeda"
[7] "package:OREgraphics" "package:OREstats"    "package:MASS"
[10] "package:OREbase"     "package:ROracle"     "package:DBI"
[13] "package:stats"       "package:graphics"    "package:grDevices"
[16] "package:utils"       "package:datasets"    "package:methods"
[19] "Autoloads"           "package:base"
> find("IRIS_TABLE")
[1] "ore:RQUSER"
> # The table should now appear in your R environment automatically
> # since you have access to the table now
> ore.ls()
[1] "IRIS_TABLE"
> # This is a database resident table with just metadata on the R side.
> # You will see this below
> class(IRIS_TABLE)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> # Apply given R function to each row
> ore.rowApply(IRIS_TABLE,
+              function(dat) {
+                  # Any R code goes here. Operates on one row of IRIS_TABLE at
+                  # a time
+                  cbind(dat, dat$Petal.Length)
+              })
Error in .oci.GetQuery(conn, statement, ...) :
ORA-29400: data cartridge error
ORA-24323: ?????
ORA-06512: at "RQSYS.RQROWEVALIMPL", line 26
ORA-06512: at line 4
>
whether my oracle's version 11.2.0.1 has no the RDBMS bug fix, and other problems? Thanks

Oracle R Enterprise 1.1. requires Oracle Database 11.2.0.3, 11.2.0.4. On Linux and Windows. Oracle R Enterprise can also work with an 11.2.0.1 or 11.2.0.2 database if it is properly patched.
Embedded R execution will not work without a patched database. Follow this procedure to patch the database:
1. Go to My Oracle Support:http://support.oracle.com
2. Log in and supply your Customer Support ID (CSI).
3. Choose the Patches & Updates tab.
4. In the Patch Search box, type 11678127
and click Search
5. Select the patch for your version of Oracle Database, 11.2.0.1.
6. Click Download to download the patch.
7. Install the patch using OPatch. Ensure that you are using the latest version of OPatch.
Sherry

Please help :- Line Feed at end of line

Hi,
When i uses this class :- CLASS cl_abap_char_utilities DEFINITION LOAD. and this constant :- CONSTANTS: c_cr_lf TYPE c VALUE cl_abap_char_utilities=>cr_lf. it will give me a line feed when i open my report in excel file but not in text file.
The reason i uses the above is becoz i dont want the line to be truncated if its space at the end of the line. If i download my report into a txt file, i wont see the line feed but when i save the file as txt file and then open with excel, it will show me the line feed. How can i solve this where i can keep the space at the end of each line and not showing the line feed when i open with excel ? Anyone can help ??

HI,
sort gt_itab01 by MATKL.
LOOP AT GT_ITAB01 INTO GS_ITAB01.
AT END OF MATKL.
SUM.
MOVE-CORRESPONDING GS_ITAB01 TO GS_ITAB02.
MOVE GS_ITAB01-MENGE TO GS_ITAB02-MENGE1.
APPEND GS_ITAB02 TO GT_ITAB02.
ENDAT.
CLEAR GS_ITAB01.
ENDLOOP.
rgds,
bharat.

Is there a way to create a line consisting in two different lines?

Like the lines that appears in maps: some are single lines (black stroke) but there are others that are f.e. a yellow line with other red thinner line inside. Can someone tell me how to do that? i'm drawing a map and it would be so much better if I could that way. Thanks...

Yes,
Add the write effect to your clip, set keyframes and colour it the outer colour.
Copy clip and paste it in track 2 on top of original.
Change colour of 2nd clip and make the brush size smaller and change Paint Style to On Transparant and add some brush spacing if you like.

How to add new line in transact move order line

Hi,
i am able to update locaotr in Transact move order.
But i want to add two locators for the same line.
I tried to insert one more record in data base, but getting error unique index error.
so how can we add new line in transact move order line .
please help to slove this isse.
Thanks In Advance
Venu.

Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks

How to read line by line in GUI_UPLOAD for long line?

Hi,
when i read a file use GUI_UPLOAD line by line, i can't get a whole line maybe for the restrained line size in the function. can i set the max line size by myself ? so i can read a whole line.
if not, i just image maybe i can set the read mode to a ' stream file', and then i read N(line size ) characters each time, but how shoulld i do ?
thanks!

Hi,
In abap output length is 255 charcters only
so you can see 255 char only in your internal table but internal table contains all the data.
so if you want to see or print remaining data better to use wa_itab+255(255) to print other data .
i hope this is helpful to u..
reward if needful

Delivery block on the line item and on schedule line

why are there two delivery block on the line item and on schedule line respectively in the sales order? which one is exactly used for blocking delivery order from creating ? thank you very much!

Hi
The reason being, each line item can have more than one schedule line. If the line item has only one schedule line, the block at item level or SchLine level gives the same result. If the line item has two schedule lines, and if you want to block only specific delivery(one among the two schedule lines) the block at item level blocks both the deliveries and if you use delivery block at schedule line level, you can block only the required scheduled delivery.
Thanks,
Ravi

Attaching line to a rectangle & repeating lines

Similar Messages

Maybe you are looking for