Attaching Network switch to Airport Express

Hi,
I have set up my network using a Linksys router and connected my Airport express using WDS............ It works. I am wondering if it would be possible to connect a Network switch To the ethernet port of the airport express so that I can connect multiple peripherals namely a NAS and another computer.
thanks

Hello natsan. Welcome to the Apple Discussions!
If you have a working WDS between your Linksys router and the AirPort Express Base Station (AX), the AX's Ethernet port should now be enabled ... and you should be able to connect an Ethernet switch to it.

Similar Messages

When adding WRE54G to wireless network incompatible with Airport Express

I added a Linksys WRE54G to expand my network to a Powerbook G4 laptop with a weak signal. When I connect the wireless expander, I no longer see the Airport express in the airport utility. I cannot access the printer or itunes speakers attached to the airport express. When I power off the expander and have a weaker signal, the airport express is available again. I don't know how to configure the wireless expander to work with airport express, and if I try to create a WDS network with the airport express (currently unsuccessful), then I believe I will lose itunes support (and maybe the printer?).
Does anyone know how to configure the WRE54G so that I can still see the airport express on my network?
Thanks,
Brigitte

I was having the same problems. Try this link, someone seems to have solved it.
http://discussions.apple.com/thread.jspa?threadID=1271648

I am unable to join my existing wireless network with new AirPort Express

I am unable to join my existing wireless network with new AirPort Express.
I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
Any suggestions? Thanks in advance.

Welcome to the discussion area!
It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
Power down the AX
Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
Release the reset button after 10 seconds
When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
Do you know the exact security type that your D-Link router is using? That is the key element in the process.
Open AirPort utility, click Manual Setup
Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
Click the Wireless tab
Wireless Mode....Join a wireless network
Wireless Network Name...must exactly match your D-Link wireless network name
Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
Wireless Password...must match the D-Link network
Click the Music icon to enable AirTunes
Click Update to save settings
Any luck?

The network on my airport express works, have wifi on the ipods,etc. But when I open airport utility on my mac and on the iphone nothing exists. Why?

The network on my airport express works, have wifi on the ipods,etc. But when I open airport utility on my mac and on the iphone nothing exists. Why?

Reboot the modem. Just pull the power for a few seconds. No settings are lost. The laptop getting through to the internet is not relevent.

Unable to create a wireless network with my airport express. Please help!

I am trying to setup a wireless network with an airport express, and connect to it with my Macbook. I just bought both of these and haven't been able to get wireless to work.
I initially plugged the ethernet cable from my cable modem into the airport express and plugged it into the wall. The macbook detected it when I opened airport utility, but the express had a flashing amber light and I was unable to connect. I then unplugged the express and re-started the cable modem. This time, the airport express showed a solid green light -which should mean that it is working correctly. However, the macbook did not find the airport express device when i searched for it using airport utility. I am able to connect the macbook directly to the cable modem, after re-starting the modem, and access the internet so at least some of the systems are go.
Any ideas? Thanks in advance for your help.
Tom

Is the issue that you cannot access the 802.11n AirPort Express Base Station (AXn) with the AirPort Utility that is running on your Win7 PC? ... or that once you have configured the AXn, the PC is unable either to find the new wireless network or can find it but cannot connect to it?

Trying to extend my airport extreme network with an airport express

I´m trying to extent my network with an airport express 802.11g.
I´ve been fallowing the guide:
http://support.apple.com/kb/HT4259
however, when I´m trying to configure the extended wifi base station ( point 8.) it won´t let me choose "extend a wireless network".
The only options I have is "create network", "join network" and "participate in a wds network".
I´ve been trying to find a solution all day.
Is there anyone out there who has hade the same problem or knows what it could be?
I´ve made sure that my base station connected to the internet through ethernet has checked the "allow this network to be extended"

however, when I´m trying to configure the extended wifi base station ( point 8.) it won´t let me choose "extend a wireless network"
Unfortunately, the older AirPort Express 802.11"g" model does not have a setting to "extend a wireless network", so it cannot be used the way that you want.
The article that you reference should be clear about this:
This article explains how to set up an 802.11"n" extended wireless network.
You need to use one of the newer AirPort Express 802.11"n" models to gain the ability to "extend a wireless network".

Networking with Multiple Airport Express'

I am using a new Airport Extreme 802.11n as a router in a home network that is in an extremely large house. I also have 3 new Airport Express' connected to the network. My question is should the settings in the Airport Utility be "Join an existing network" or 'Extend an existing network' for each Airport Express' or some combination of either based on which express is first in closest proximity to the Airport Extreme.
Thanks, JB

I've only got the two running now, and the signal at the far end is dramatically better than without.
I don't think it decreases bandwidth for each device. Each machine's bandwidth decreases a little for the overhead, but it is not cumulative.
On a side note, when I added the New Airport Express, I had an absolutely horrible time getting it all to work correctly and I think I had similar symptoms as you are describing. I was able to differentiate which base station I had connected with because the new Airport Extreme was n-band and the main stations is an old g-band. So, by holding down the option key when selecting the airport menu, I could easily see the bandwidth going above 54. I hope you're laughing as I later realized that the MAC address of the base station you are connected to shows up in the menu with option held down, also.
Everything seemed to be connected right, but it just wasn't working. I ended up resetting both devices and started from scratch. Just about when I was going to give up and just extend the network, my WDS connections worked and I haven't had any problems.
Before I realized that the network wasn't configured correctly, I thought my old Airport Extreme was going bad. It was freezing up and I had to restart it to get an internet connection. Ever since I fixed the WDS network, I don't have any problems with it. I think the two base stations were jamming each other.

Is it possible to expand networking capability with Airport Express?

I have 754S Sierra Mobile Hotspot, is it possible to expand networking capability with Airport Express?
Thanks,
Napat

No. The iPad can connect to only one WiFi system at a time.

Boost network signal using AirPort Express without using WDS?

I want to boost the signal on my network using my airport express without setting up a WDS network, is this possible?
I had previously set up my Time Capsule as a WDS main and my airport express as a WDS remote, but this slowed the network down dramatically.

If you have an AirPort Express 802.11n, you can configure it to "extend a wireless network" and maintain "n" speeds on the network with a minimum of bandwidth loss.
Check the model number of your Express is you are not sure which version you have. Look on the side of the device for the Model Number. Model No. A 1264 is the "n" version.
Post back if you have this version and need more info on the "extend" setup.

Can I extend my network by connecting one of my airport express devices to my airport extreme via an ethernet cable? I have CAT5 cable throughout my house but have a wireless network w/ 3 airport expresses

Can I extend my wireless network by connecting one of my airport express devices to my airport extreme via an ethernet cable? I have a wireless network with 3 airport expresses and 1 airport extreme functioning as the base station. I have CAT5 throughout my house.

Welcome to the discussions, mib88!
Can I extend the network a second time with another Airport Express...
The short answer would be no. If you want more details, please continue to the next paragraph.
Apple's "extend a wireless network" works just like the hub and spokes of a wheel. Your main hub is either the Time Capsule or the AirPort Extreme and the AirPort Express is at the end of a spoke. You can add more devices at the ends of other spokes, but these devices will communicate directly to the hub, not to another device at the end of a spoke.
Apple does offer an option which is is known as a "static WDS", which can consist of a "main", "relay" and "remote" device. The problem here is that this type of setup has two huge drawbacks:
1) All of your faster "n" devices will drop down to much slower "g" speeds
2) The bandwidth or speed capability on the network will drop down to only 25% of the original bandwidth with a "main", "relay" and "remote" on the network.
Don't think you want this on your network. Your best option is to connect the new AirPort Express to the "hub" using an ethernet connection. If you can't run the ethernet cable, take a look at a pair of ethernet powerline adapters to accomplish the same task by sending the ethernet signal over the AC powerline in your home.

HT4259 I have a Netgear wndr3400 and I can "join a wireless network" but can not "extend a wireless network" on my Airport express. Does anyone know why?

I have a Netgear wndr3400 and I can "join a wireless network" but can not "extend a wireless network" on my Airport express. Does anyone know why?

Sorry, but "Extend a wireless network" is a proprietary Apple setting that will only work if you have another Apple router.
It is not compatible with devices from other manufacturers.

Extending My network with three Airport Express or buy an Airport Extreme?

I live in a large three story house and currently have it wirelessly networked using two Airport Express' but my signal is very weak on the third floor and in other spots throughout the house.
Would it be possible to buy a third AE and extend the network that way or would I be better off buying a AEBS?
Any thoughts or suggestions would be greatly appreciated.
Thanks

It will really depend on the construction materials used in your house or any other forms of Wi-Fi interference that could prevent a clear wireless signal. Both routes, you suggested, will have it advantages and disadvantages.
Extending the existing network wirelessly using a WDS, effectively, cuts the throughput in half for each base station in the chain...so, in this case the second AirPort Express Base Station (AX) (acting as a WDS relay base station) would only get half that of the first AX (acting as the WDS main base station). In turn, the third AX (acting as the WDS remote base station) would receive half of the second's throughput. The good news is that you should have a strong signal across each of the AXs, just lower throughput the farther along in the chain.
The 802.11n AirPort Extreme Base Station (AEBSn) has a greater range than either the older 802.11g version or the AXs. You may find that it will provide enough to cover you entire house. In the off-chance that it doesn't, you can still use it to create a WDS between AEBSn and your current AXs.

Trouble extending my WiFi network with older Airport Express

Hi,
As the question states, I have an older Airport Express which I have dug out to try and extend my WiFi network in a new house.
I am on Virgin Media (fibre optic) in the UK and get a good WiFi service but one room in the house (which I have just turned into a cinema/media suite) has no reception.
I have successfully managed to 'create a new network' via the Airport Express and the signal strength is 100% but for some reason if I try to reconfigure the device to extend the existing network I get no improvement at all from the (zero) signal I was receiving before.
Am I doing something wrong? Or is there an additional step I am missing?
I could live with having a secondary network but what I would really like to achieve is Home Sharing from my main computer, so that I can access my photos, movies and music etc. from iTunes on the big screen. If the computer exists on another network my iPad, iPhone and AppleTV can't see/use the media from that room.
Many thanks in advance,
Colin

Are these the steps you used?
To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
Start with the device that will be configured as the primary Wi-Fi base station. Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
Configuring the primary Wi-Fi base station
Power on all 802.11n Wi-Fi base stations and allow them time to appear in the AirPort Menu Extra.
Open AirPort Utility (On a Mac, choose Go > Applications from your desktop, click the Utilities folder, then open AirPort Utility. In Microsoft Windows, choose Start > All Programs > AirPort to start AirPort Utility).
Select the primary Wi-Fi base station in the Base Station Chooser, then click Continue. Note: If you see a message appear that indicates that the Wi-Fi base station has been reset, click Cancel to continue.
Click Manual Setup. Enter the base station password if necessary.
Click AirPort in the toolbar.
Click Wireless.
Choose “Create a wireless network” from the Wireless Mode menu.
Select the “Allow this network to be extended” checkbox.
Enter a Wireless Network Name.
Optional: By default, Wireless Security is set to None so that no password will be required to join the network. We recommend you click on the Wireless Security menu, select WPA2 Personal, and create a password between 8 and 63 characters long.
From the Radio Channel Selection menu, select Automatic.
Click Update.
The next window may indicate that there are some problems. Resolve the problems, then click Update.
You are now ready to add extended Wi-Fi base stations to your network.
Configuring an extended Wi-Fi base station
Place any extended Wi-Fi base stations within range of the primary Wi-Fi base station
Ensure that all 802.11n Wi-Fi base stations are powered on and allow them time to appear in the AirPort Menu Extra
Open AirPort Utility (On a Mac, choose Go > Applications from your desktop, click the Utilities folder, then open AirPort Utility. In Microsoft Windows, choose Start > All Programs > AirPort to start AirPort Utility).
Select the Extended Wi-Fi base station in the Base Station Chooser, then click Continue. Note: If you see a message appear that indicates that the Wi-Fi base station has been reset, click Cancel to continue.
Click Manual Setup. Enter the base station password if necessary.
Click AirPort in the toolbar.
Click Wireless.
Choose “Extend a wireless network” from the Wireless Mode menu.
Choose the network you want to extend from the Network Name menu.
Enter the network and device password if necessary, then click Update.
The next window may indicate that there are some problems. Resolve the problems, then click Update.

Want DELL PC to network with Mac Airport Express

I installed Airport Express in my PowerBook - works fine for me - but my husband's Dell gets kicked off really often. And I can print wirelessly, but can't get his Dell to print. Anyone understand the compatibility issues?

I installed Airport Express in my PowerBook - works
fine for me - but my husband's Dell gets kicked off
really often.
Ensure that the Enable IEEE 802.1x authentication for this network check box is not checked.
Problems connecting an XP PC to an Airport Base Station
http://tech.ifelix.net/2002.html
And I can print wirelessly, but can't
get his Dell to print.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://tech.ifelix.net/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://tech.ifelix.net/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://tech.ifelix.net/1012.html

How do I extend the range of my existing Belkin WiFi network with an Airport Express Gen 2?

It is my understanding that the second generation of the Airport Express can be used to extend an existing non-Apple WiFi network. From all I read, it was very difficult to do with the Gen 1 Airport Express, but I don't find anyone referencing the Gen 2. My router is a Belkin Share F7D3302 V1 (updated to current firmware as of yesterday). I am able to attach to the Belkin network and stream music to my home theater, but would also like to extend my WiFi. Any help is appreciated.

It is my understanding that the second generation of the Airport Express can be used to extend an existing non-Apple WiFi network.
Not sure where this information has come from....and it would be extremely surprising if this were true. Do you have a link to an official announcement from Apple that would confirm this?
As far as we know, Apple's "extend" setting remains a proprietary feature that is designed to work only with other Apple routers. The "new" Express appears to carry on that tradition.
As such, it would be very unlikely that any of the Apple routers would be compatible with a Belkin product....or any other manufacturer's product for that matter.....if you are thinking of extending using wireless only.
If you figure out how to do this.....it will be a breakthrough of major proportions. Please let us know if you are successful.

Attaching Network switch to Airport Express

Similar Messages

Maybe you are looking for