Attaching operations to Production Order or Routing

Hi All ,
We have a scenario where the user is We're in need of setting up "Shop Floor transactions" for all production .
This request is in order for production control and material management to have better control on Production Order moving in to "Staging" and production They need shop floor rouing operations like: OP10 Release, OP20 Staging, and OP30 Production, OP35 Completed.
Kindly advise me as to how do I proceed with the ticket . What is the his requirement and what should be the procedure for the course of action. Thanking You
Kind Regards
Ayaz

Hi
Master data
1. You need to have Routing - in which you need to have the Operation created with Workcenters.
2. Also in the routing you need to have the Component allocation done properly.
3. material master workscheduling has to be done for hte header material.
configuration
1. Create a order type
2. Order type dependent parameters
3. Order confirmatoin parameters.
4. Order scheduling.
Transactions
1. Create prodn order / release / Save
2. Do operation wise production confirmation.
This will address your querry.
Reg
Dsk

Similar Messages

Operation on production order - what is the object (BOR) to manage it ?

Hello,
I have to call a workflow when an operation on production order is confirmed, or partially confirmed, or deleted.
What is the business object to use to manage it ??
Tks,
Roberto.

Hello Uma,
yes, right...
yesterday, I was not able to see the trace when I deleting a production order becuase the object BUS2005 was not
active on customizing:
after I found it
No business object triggered for production order creation
end now is showed...
SO, we have to use BSVW ... and so the consequences is : How to know what is the object BOR to activate !??!?!
tks

Goods Issue To Each Operation Of Production Order?

As we know, in SAP ,when we create and realse the production order,we could posts good issue to the production order ,using MB1A. And in SAP , the components can be assigned to the operations of the finished product.
But in our company, the production order will take long time,and during production,different materials will be used in different phase of the production order,that means different components will be used for different operations.
And for some reason,we don't want our material to be backflushed during production.
So I want to ask can we post goods issue to each operation of the production order,not to the whole production order? Can SAP support Post Goods Issue To Each Operation Of Production Order?
What shall we do if we want do this?By ABAP development ? Or there is third party software
can do this with SAP?
Thanks for any reply!
Edited by: Fei Liu on Mar 14, 2009 4:56 PM

Hi Fei,
As explained above, i think the concept of releasing the individual operations instead of releasing the order at header level would work fine for your requirement.
Steps:
1. Go to operation page in co02.
2. Select the first operation, at the bottom of the screen you would find a Green Flag, click on the same.
3. You will now find that the status of the first operation has changed to REL, while the others are still not.
4. At header level you will find a status PREL, indicating partial release.
5. After completion of the first operation, confirm the same & select the second operation & click release, & the process follows in this manner
6. Please do not click the green flag at the header level as this will release the entire order.
Pre-requisite:
1. You have assigned components to the respective operations.
You might also want to consider the usage of trigger points. This you can assign to each operation, where-in if the status changes to CNF, you trigger the release of the following operation. But before opting for this flow, first do it manually to ensure it meets your need.
Also if the components assigned to the same operation, needs to be issued at different date, then you can use the lead time offset in BOM. In cs02, go to item details, here you can specify the same. Eg: If your operation stats on 15th March & you want this component to be issue only on 17th March, then specify the offset as 2. But if you want the components to be issued 2 days in advance of 15th march, then specify as 2-.
Hope the above helps.
Regards,
Vivek

Regarding Costing in External processing operation in production Order

Hi Everybody,
We are trying to do sub contracting through external processing operation in production order. In brief, we are creating a production order which contains just one operation and when the prod.order gets released, it creates a purchase req through external processing operation. Pur.Req is being converted to Pur.Order with all the Raw's which we are going to send to Sub Contractor..
The costing issues we are facing are
1. First we receive GR against Pur.Order, once its done, the Raw's which we sent to Sub.Contractor will be backflushed.. but we dont receive the Finihsed part until we confirm the production order.... there is a Gap between this two processes.. so how can we make sure that there wont be any differences in terms of FI..
2. Second issue is, some times even if we ordered 10 pcs, subcontractor can only send 5pcs and 5 pcs afterwards.. but every month end FI dept tries to close the books, so how can we deal with this issue if i receive 5 pcs in this month and remaining 5 in the next month...
If any body dealth with this kind of situation.. your hints will be really valuable,
Adavnce thanks
srikanth

Dear Srikanth,
Please note the following:
1. First we receive GR against Pur.Order, once its done, the Raw's which we sent to Sub.Contractor will be backflushed.. but we dont receive the Finihsed part until we confirm the production order.... there is a Gap between this two processes.. so how can we make sure that there wont be any differences in terms of FI..
- a) Issue your raw materials through T.Code. - MB1B, Mvt. Type - 541. This will transfer materials from your stock to vendor stock (provided you have initiated vendor material provision and activated 541 mvt. type for PP)
b) After you receive the material back from vendor, run the T.Code MB01, which will cause Mvt. Types 543 and 101. Now the material has come back to your Production order, but not in Storage location stock.
c) Then carry on normal CO11N and MB31 for your production order.
Hope this will solve your problem.
Revert back if you still have any question.
Regards,
Angshuman Kar

New operation for production order - change operation quantity not possible

Hello all,
we want to create a new operation for a production order.
So we go to CO02 and to the operation order overview screen.
But when we add a new operation, the system will not let us determine the operation quantity for the new operation, the system will just take the quantity from the operation before.
How can I determine the qty by myself?
Thanks
Anne

You can do another way also. You change your routing with new operation quantity and save it in CA02. NOw you go to CO02 and read master data in funtions, then the new operation quantity will definetly come in to the production order.
KrishnamurtyDSS

Production Orders without routing

Hello,
I would like to know If it is posible to create a production order for a material without a routing and have the posibility of introducing the operations directly in the production order.
Regards
Laura

Dear,
Yes possible go to OPL8 select your order type and plant then in do setting as Routing Selection :- 0
Also you can create the reference operation set in CA11 so if you don't have routing then system will ask you for the ref. operion set.
Hope it will solve your problem.
Regards,
R.Brahmankar

Change not done in the user fields of operation for production order save

Hi Experts
I need to change the user fields of the operation like (SLWID and USR00 )for a production order at the time of save.
So am using the exit PPCO0001 and using the OPERATION_TABLE internal table in the exit to chang the details.
I have done coding in the exit to change SLWID and USR00 in OPERATION_TABLE internal table, but its not updated in the database and the screen also. I dont understand why.
Please let me know, why the update are not happening.
Thanks in advance.
Regards
Rajaram

Why Update is not happening in PPCO0001.
Please let me know your views.
Thanks in advance.

Issue with printing newly added operations in Production Order through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi,
1) Go to Tcode "OPK8"
2)Select LG02 "Op Control Ticket"
3) Double click on :List Control for Transactions" in the left hand menu tree
4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
Try this.

Setting deletion indicator/Flag for an operation in production order

Dear All, Hi
How to set deletion indicator/flag for an operation in a production order. I don't want to delete the operation as such. Please help & suggest.
Ragards,
Shaiz

Hi Shaiz,
I hope the requirement is just like you posted earlier as in case of component deletion.
Here in this case also the behaviour of the order remains the same.
So you can go for release the order as soon as the order gets created, your both the requirements can be fullfilled.
Also you havn't provided the exact feedback on the solutions offered by all of us, on your last query.
Request you to give detailed input on the same.
Hope thish helps you.
SmanS

Create Rework Operation in Production Order

Hi,
I am looking for a function module that will create/insert an operation in a Production Order when a rework is done.
Do you know any? Please help. Thanks.
Regards
Ryan

Hello Frank,
Please inform us the follwing details:
Whether you are getting the Status: PRT after Shop papers printing?
Immediately after the operation insertion (Because of Trigger Points) what is the Print Status?
Please refer the OSS Note for fuether details: 755992, 568883
Regards,
Siva

Changing Order Operations of Production Order

Hi Experts,
In Production order->operations->Maximum Wait time.I need to change this.can anybody help how to achive this.

Hi,
Follw this
1: CO02, (change production enter) enter
2: Operation Overview (F5)
3: You see list of operations, double click on operation number. Or selection operaion and click on operation details.
4: Select tab page Interop. times
5: You will see the field Max Wait time. and maintain.
6: Come back to header screen click on schedule (ctrl+F8) to reschedule the order with changes.
Pavan

Confirmation for Split operation in Production order

Hi Experts,
I have one production order say order no. is "100000000000" and its order qty is 100pcs and in operation no. "20", i have splitted the operation into two individual capacities and allocated 50pcs to each individual capacity. Now can any one explain me or tell me the steps required for confirming the operation quantity by individual capcity.
Regards,
Satya.

Hi,
Thanks for your response on my post.
As you mentioned I am using T-code CO11N for Production confirmation, but in this screen if I select operation no. 20, by default, system is read work center from production order "operation overview" screen. Now I want to capture the confirmation quantity against "induvidual capacity" and want to see some reports based on "induvidual capacity" level of the same work center.
Could you pl. advise on this.
Regards,
Satya.

Assigning mic in operations of production order for newly inserted oprt

Hi, Please advise how to assign mic to the newly inserted operation of the prod order?i mean say 3 operations copied form master data. we added a 4th operation manully. i want to assign new inspection characterstics to the 4th opration. plese advse.

Dear Raju
1) Go to CA02
2) go to header
3) Maintain inspection Point as 150
4) Maintain partial Lot Assign as partial lot assignment according to plant default
5) At Operation level maintain a QM work center ( testing ) with Control key QM04 ( as per your requirement)
6) double click on the control key and go to Quality Management : Inspection points
7) Maintain Inspection point completion : Quantity , Valuation and confirmation ( as per your need , you can select other options also) press F1 and see the impact of each
8) choose time related and keep Tfac 1 and Unit as HR ( As needed)
9) You can select quantity - related also and then maintain the quantity.
10) Select the QM operation and maintain in the MIC
Regards
Gajesh

Barcode for each operation of production order

Hi, We want to use barcode for each operation of the manufacturing order so that by scanning it, it will display the data related with order automatically on screen. pls guide how to implement the same

it is done by myself.

Open Multiple PDF files from Production order/Routing

Hi Everyone
We are in ECC 6.0 environment. We have a scenario where multiple documents were attached to single operation and also at multiple operations. But when I was trying to open these PDF documents, only the last file was getting opened and closing the previous file. How can I open multiple PDF files at one time from Production order or Routing?
Any help is appreciated.
Regards
Prasad

Hi Prasad,
from DMS standard I regret but such a functionality is not available. In the standard originals can be opened only one after another.
I think for realising this functionality an individual modificatoin is necessary.
Best regards,
Christoph

Attaching operations to Production Order or Routing

Similar Messages

Maybe you are looking for