Attaching Search Help to Standard Field

Hi,
In QAPP table, i want to attach customized Search Help to USERN2 field. So i take access key for that data element but still it's not modifiable mode.
so can you please tell me how to attach search help to that field.
Regards,
Pushkar.

Hi,
Goto to the table QAPP, goto the entry help/check tab and in that keep the cursor on the field USERN2 and press the search help button below the tab and you can insert the search help only if you have the access key to changes.
Reward if useful.
Thanks,
Muthu.

Similar Messages

Attach search help to standard table field

Hi,
I need to attach search help to standard table field VBKD-EMPST.
I have create a z search help and taken acess key from SAP.
But unable to attach this to standard table field.
Kindly help.
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Oct 27, 2010 6:11 PM

Hi,
just go throw this link
Re: Attaching Search Help to a field
I hope this will help u
Thanks
Regards
Akhilesh Singh

Hi how to attach search help to a field

hi all,
how to attach search help to a field.

hi
Attaching a search help to a field
A search help can influence the behavior of a field when the input help is called. The search help must be assigned to the field in order to do this. You have the following options for this assignment:
Attach search help to a data element / table or structure field / screen field / check table.
Conventionally search helps are attached to table fields or data elements. We shall see the same.
Attaching a search help to a table field
Choose the field name, click on search help tab and
provide the name of the search help.
A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
Attach the search help to the table field
The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
Attaching a search help to a data element
Provide the search help name and the parameter name
under the further characteristics tab of the data element.
If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
Also note that the input F4 help would be available wherever the data element is used.
Attaching a search help to a screen element
A search help can be directly assigned to a screen field in two ways.
The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
However, input help is only available for this particular screen.
In this case, the search help is only available for this screen.
IF YOU WANT TO ATTCH A SERACH HELP TO THE SCREEN FILED THIS IS THE CODE
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
************SELECTION SCREEN DESIGN************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
***********END OF SELECTION SCREEN DESIGN******************
**********VALIDATION FOR SCREEN FIELDS*********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
* IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
* SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
* DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
* PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
VALUE_ORG = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* MARK_TAB =
* IMPORTING
* USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
* FIELD_TAB =
* RETURN_TAB = RETURN_TAB
* DYNPFLD_MAPPING =
* EXCEPTIONS
* PARAMETER_ERROR = 1
* NO_VALUES_FOUND = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
REWARD IF USEFULL

Attach search help to standard screen

Hi Gurus,
I have to populate order quantity KWMENG in screen subscreen 4900 of VA01 ( Create Sales Order) from a ztable based on customer and date.
I have tried customer-exits ..There exists none satisfying this req. Could anyone pls tell how I can go about this now?
I believe , one way is to create a search help attaching to the screen-field . Can anyone help what is the process ? Has anyone done this earlier -attaching search help to standard screen
Rewards for helpful answers are sure!!
Regards,
Shweta

Hi Shweta,
Check this matter.
There are 3 ways:
1)In the PAI of the screen, add a module Process on value request.For example:
PROCESS AFTER INPUT.
MODULE USER_COMMAND_100.
PROCESS ON VALUE-REQUEST.
FIELD field_name MODULE value_request_for_field_name.
*field_name is the field for which you require search help.
In the Module value_request_for_field_name call this function 'F4IF_INT_TABLE_VALUE_REQUEST'.
2)The above procedure can be used if the field you have defined doesnt have an existing search help.If it already has search help and the field in the screen is taken from the dictionary,then in the attributes,u can check from from dictionary under the dictionary tab.
3)A manual search help can also be created in the se11 transaction by clicking on the search help radio button and giving the table and field name for which search help is required.
Hope this resolves your query.
Reward all the helpful answers.
Regards

How to change search help for standard field in me51n.

hi frnds,
I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
best regards,
sudip biswas

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

Attaching search help to a field in table control

Hi,
Please suggest a way to attach search help functionality to a field in table control.
My requirement os based on matnr the f4 help for the next field shud come.
I gave the func mod dunp_values_read, but the internal table i pass does not return with the fieldvalue of matnr field.
is there any func mod to read values of screen fields in table control so that based on that I can go to func mod f4_init_....
Will be rewarded.

Check the FM: HELP_VALUES_GET_WITH_TABLE_EXT
Check the documentation for example code.
regards,
Ravi

Search help for standard field BASEG-ZUONR

Hi Guys,
I am working on the standard transaction FB60 for vendor invoice posting.In this transaction item level we have the field Assignment Number BSEG-ZUONR.
I need to provide the search help for this field.In SAP we don't have search help for this field.
Please suggest me the best way to provide the search help for this.
Is it possible to provide the search help through the transaction variant.
Regards,
Ramesh

Hi,
May be you can refer to the following link
[Search help enhancement in VA01;
Regards,
Mahesh

Attach Search Help to INCO2 field in VA01 transaction

Hi Gurus,
in Va01 transaction , I need to attach a F4 help to INCO2 field .
Please let me know how and where should I call the search help.
Regards
Avi

hi
can you say how did you add search help for that field ?
thanks

Attaching Search Help to a field

HI All,
Can anybody please tell me how to attach search help to a particular field??
Thanks.

hi
good
Attaching to a Table Field or Structure Field
The search help can be used by all screen fields that refer to the table field or structure field. The search help parameters and the fields of the table or structure must be assigned to one other in this type of attachment.
If an export parameter of the search help is assigned to a table field, the contents of this parameter are returned to the corresponding screen field as soon as the user has selected a line of the hit list in the input help. If an import parameter of the search help is assigned to a table field, the field contents are used for the value selection (see Value Transport for the Input Help).
Normally some parameters of the search help cannot be assigned to a table field. The assignment is thus left open for some search help parameters. A constant or any other field that is searched for in the module pool when the input help is called can also be assigned to a search help parameter.
http://help.sap.com/saphelp_nw2004s/helpdata/en/63/1b70bfc32111d1950600a0c929b3c3/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/63/1b70c2c32111d1950600a0c929b3c3/content.htm
thanks
mrutyun^

Adding a search help to standard field

hi
My requiremnt is to add a search help to the field Corporate Group(KONZS) in XD01(customer Master data) table KNA1
Can anyone suggest how to go about
Thanks in Advance.

Hi
Sorry, but I think that you must see the SAP Note 512840 - Search customer master record with search term 1/2
Regards
Eduardo

Attaching Search Help for screen field in standard transaction

Dear All,
I want to attach my own custom search help for field 'Requiremenr Tracking Number (BEDNR) in PO (ME21n).
How can i do this?
Pls gv the stps.
Thanks a lot.
Kind Regards.

Prasad, you know, when I search forum for answers, I'm really disappointed when I see people have found a solution but don't share, and as the thread was maybe one year old or later, I don't feel to ask because the guy probably don't remember what he did. So giving a little explanation immediately is always a very good idea.

Attaching search help to SCREEN FIELDS AND TABLE FIELDS

Hello experts,
Himanshu here.
Could you please explain how we can assign search Help to a screen field AND TABLE FIELDS in ABAP?
Please reply at the earliest,as we have some deliverables to be met
Thanks

Hi,
In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
A dialog box appears in which you must select the type of search help.
Select Collective search help and choose .
The maintenance screen for collective search helps is displayed.
Enter an explanatory text in the field Short text.
You can for example find the search help at a later time using this short text.
In the Definition tab page enter the parameters of the collective search help.
Select the Imp flag if it is an import parameter. Select the Exp flag if it is an export parameter.
Define the types for the parameters of a collective search help by assigning a data element. Enter the name of the data element that describes the contents of the search help parameter in the Data element field.
You can assign the parameter a default value in the Default value field.
In exceptions it could be necessary to change the standard process defined by the search help. You can implement the deviation from the standard using a search help exit.
In this case enter the name of the search help exit in the corresponding field.
On the Included search helps tab page, define the search helps that you want to include in the collective search help.
You can include elementary search helps and collective search helps.
Use the Hide flag to control whether an included search help should appear in the dialog box for selecting the elementary search help. If the flag is set, the search help is not offered.
It makes sense to hide search help inclusions if one or more search paths in the standard system should not be used in a concrete R/3 System. Similarly, search help inclusions can also be already hidden in the standard system because they only can be used meaningfully in a few R/3 Systems. You have to cancel the flag in this case.
Position the cursor one after the other on each allocated search help and choose Parameter assignment.
In the next screen, enter the parameter names of the elementary search helps to which the corresponding parameters of the collective search help should be assigned in the field Reference parameter.
You can select the parameters contained in the included search help using the input help. Create a proposal for the assignment with Proposal.
Save your entries.
A dialog box appears in which you have to assign a development class to the search help.
Choose .
Result
The collective search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred when the collective search help was activated, the activation log is automatically displayed.
Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
regards,
veeresh.

Add search help to standard field in shopping cart

Hi Experts,
We are on a SRM 5.0 implementation for classic scenario.
In the item basic details we have a field tracking number. (BE_TRACKING_NO). We have a requirement to add a search help (drop down with fixed values) to this field. Is this possible to do on a standard way? The fixed values we will need to get from the attributes the user has assigned.
Regards,
Tom

it needs to be done from backend
you can customise the field to appear from the backend in the portal, and then add a code like a normal field has to build
a help
check ptarQ>customising > additional fields

Search Help for standard field

I need to enhance the existing collective search help provided for a certain standard field(ex.Field XXX).
However while providing this additional search help, I need to show XXX data along with YYY( this is maintained in some other table but linked to XXX) .Is it possible.

Hi,
You can create view and join both tables. Then use this view in search help.
Krzys

Attaching Search Help to Standard Field

Similar Messages

Maybe you are looking for