Attachment deleted log not captured in ECC why?

Hello All
i could manually attach any document to the purchase order but no tracking happen in ECC if any one deleted that attachment why?
should i do any settings to capture this log?
me23n -create -> create attachment
and later i delete this attachemnt.
muthu

Hi Jurgen
it was very useful.
i wanted to track who deleted a attachment ?
when i subscribe
"you have been entered a subscriber"
when i cancelled
"the subscription has beed cancelled"
i did not undrstand extacly.
for eg. my buyer attached a supporting document but another one can delete the attachment.
i wnated to know who deleted this attachment?
sap log shows who attached docuemnt but not who deleted an attachmnent.
br
Muthu

Similar Messages

Deletion change pointers are not going to ECC after C5

Hi,
My issue is that I am running C5 after Planning run.But deletion change pointers are not going to ECC.Because of this we have duplicate of orders in ECC.We are running CCR to bring back the "Planned orders with deletion change pointers and deleting again using RRP4.Why deletion change pointers are not going along with creation change pointer?Help will be highly appreciated.
Thanks&Regards
Venkadesh

Hi,
Check whether you have enabled the " delete events" check box. This check box will be valid if you are publishing the planning results thru background job.
If you set this indicator, the system deletes all selected change pointers without sending them first.
Thanks,
nandha

Why am I getting redirected to the MSN homepage (when logging out of hotmail) with third party cookies not enabled? And why are exceptions to cookies being cleared in private browsing mode?

I have the latest version of Firefox, I use Private browsing with Allow cookies but not third party cookies. Recently I have begun to be redirected to the MSN homepage after logging out of hotmail and whenever I add MSN cookies to the exceptions in cookies the list gets deleted. Can anyone tell me why, when blocking third party cookies should prevent that?

Two initial thoughts:
(1) If you look at the cookie names and content in the View Cookies dialog, are they the ordinary scramble of different names and values, or do they look like "opt-out" cookies? Some security software or add-ons may restore opt-out cookies after you clear them.
(2) If you have any extensions that make requests to those sites, it's possible they are bypassing private browsing mode, although I would hope not. Hmmm.
Unfortunately, unlike history where you can see the time that an entry was added, it is difficult to figure out when a cookie was set. But there are many cookie add-ons that might provide insight.
Alternately, you could go directly to the cookies.sqlite database using the SQLite Manager extension. This is on the nerdy side, but manageable.
(1) Install SQLite Manager from: https://addons.mozilla.org/firefox/addon/sqlite-manager/
(2) The extension adds an item to the Tools menu. If you do not normally use the classic menu bar, tap the Alt key to display it temporarily or press Alt+t to pull down the Tools menu.
SQLite Manager may suggest a particular database, particularly on your second and later uses. You can skip that and it will open a new window.
(3) On the toolbar (first screen shot), choose the cookies.sqlite database and click Go. This should display the database entries for all your cookies (second screen shot).
(4) Select the following SQL query text:
SELECT host AS Site, datetime(creationTime/1000000,'unixepoch') AS Created, datetime(expiry,'unixepoch') AS Expires
FROM moz_cookies
ORDER BY creationTime, host
(5) Click the Execute SQL tab, paste the query, then click Run SQL. You should get a list of sites in order by the date their cookies were set (third screen shot).
Are the dates all fresh? If they are older, something may be rolling back your cookie clearing.

FCE4 will not log and capture long clips.

FCE4 will not capture clips 3 min. or longer from a Canon HF100. It just gives an error mark at the end of the process with no explanation. The capture process freezes on long clips with the Canon HV 30. I can capture short clips with both but nothing over 3 min. Help is greatly appreciated. Thanks

Yes, I use the log and transfer for the HF100 AVCHD. I have transfered and edited several 1-2 min. clips but I am trying to transfer a 9 min. clip and at the end of the transfer process FCE4 displays a error mark next to the clip with no explanation as to why there was an error in the transfer. I use the capture mode for the HV30 and I have also captured and edited 1-2 min. clips but the 9 min. clip freezes after a few minutes of capturing. I am using a Western Digital external drive with USB connection for the scratch disc. I have no problems with short clips just the 9 min. one. Any ideas. Thanks

I want to email a Pages document as a Word doc. I used to be able to do this by clicking on share then send via mail then on Word and an email would appear with my word doc attached. Now the email does not come up. Why?

I want to email a Pages document as a Word doc. I used to be able to do this by clicking on 'share' then 'send via mail' then on 'Word' and an email would appear with my word doc attached. Now the email does not come up. Why?

It's difficult to do more than guess when you don't say what version of OS X or Pages you're running, but if you're on the latest, have you tried the Share menu -> Send via Mail command?
If that doesn't help, you may have better luck if you ask in the Pages forum:
Pages
When you repost, be sure to include full details about your versions so that people know what it is you're working with.
Regards.

New entries in table TSTC not capturing in scu3 change logs

Hi ,
We have TSTC table log enabled.
New Entries which comes through transport in the table TSTC are not capturing in change logs.
We have created a new Z T-code and transported it to Quality and then to Production.
But in the change logs of the tbale TSTC it is not captured both in quality and Production.
In the table TSTC t-code is present.
But the change log for the table doesnot show any new entry created.
In development change log of TSTC, the change is present but in Quality and Production it is not present.
Development client : 400
Quality Client : 600
Production Client : 600
Can any one spill some beans on it...
Thanks & Regards
Kiran

You need to add "recclient = ALL" (or same client value as "rec/client" profile parameter in RZ10) to the transport profile as well in the STMS.
Search SAP notes and the forum here for "recclient" (without "/")
Cheers,
Julius

GOS - Attachment - Link is not deleting from SRGBTBREL

I have created custom transaction and this have option to attach desktop files (ie Word, Xls, PPT, PDF) etc into this transaction. For this i am using class CL_GOS_MANAGER.
After the attachment sometimes users will delete the attachments from attachment list.
My problem is some attachment links are not deleted completely from SRGBTBREL (Link Table) . Because of this next time users displaying the attachment list still the deleted entries are showing in the list.
If users double clock it is giving a error message "Document does not exist" ( message class SO and message Number 006) .
Any body come across this kind of scenario?
Given below is the code for deleting the attachments
* Object creation of GOS View
    create object gos_view
      exporting
        ip_mode = 'D'.                     " Display Mode
* Start GOS Service for attachement view
    i_viewobj-objtype = 'YATT_ATTA'.
    i_viewobj-objkey = yatthdr-docno.
    call method gos_view->start_service_direct
      exporting
        ip_service = 'VIEW_ATTA'
        is_object = i_viewobj.
a®s.
Edited by: a®s on Feb 18, 2008 3:20 PM

Mylene,
Thanks for your info. I already saw this note. Please share if you any info how we can delete the SRGBTBREL links completely using class CL_GOS_MANAGER?
I already run the program RSGOSRE01 (suggested in the note 569123) But nothing is shown. But the document showing in the SRGBTBREL links it have attachment
For example , the following are the links from SRGBTBREL
BRELGUID                         RELTYPE      INSTID_B
475E7A046A581C0EE1000000A3F331A3 ATTA         FOL27000000000004EXT32000000033688
475E828FD2561C0DE1000000A3F331A3 ATTA         FOL27000000000004EXT32000000033775
476515A0A02A0E78E1000000A3F331A3 ATTA         FOL27000000000004EXT32000000034502
47651683A02A0E78E1000000A3F331A3 ATTA         FOL27000000000004EXT32000000034503
Here the last link still showing in the table , but i find there is not attachment
47651683A02A0E78E1000000A3F331A3 ATTA         FOL27000000000004EXT32000000034503
Any more Info?
Edited by: a®s on Feb 19, 2008 8:58 AM

When occurs crash recovery,why use active online redo log not archived log?

If current redo log had archived, but it's still 'ACTIVE'. As we all know, archived log is just an archived copy of the current redo log which is still 'ACTIVE', they have the same data. But why use active online redo log not archived log for crash recovery?(I think, if crash recovery can use archived log, then whether the online redo log is 'ACTIVE' or not, it can be overwritten)
Quote:
Re: v$log : How redo log file can have a status ACTIVE and be already archived?
Hemant K Chitale
If your instance crashes, Oracle attempts Instance Recovery -- reading from the Online Redo Logs. It doesn't need ArchiveLogs for Instance Recovery.
TanelPoder
Whether the log is already archived or not doesn't matter here, when the instance crashes, Oracle needs some blocks from that redolog. Archivelog is just an archived copy of the redolog, so you could use either the online or achive log for the recovery, it's the same data in there (Oracle reads the log/archivelog file header when it tries to use it for recovery and validates whether it contains the changes (RBA range) in it what it needs).

Aman.... wrote:
John,
Are you sure that the instance recovery (not the media recovery) would be using the archived redo logs? Since the only thing that would be lost is the isntance, there wouldn't be any archived redo log generated from the Current redo log and the previous archived redo logs, would be already checkpointed to the data file, IMHO archived redo logs won't participate in the instance recovery process. Yep, shall watch the video but tomorrow .
Regards
Aman....
That's what I said. Or meant to say. If Oracle used archivelogs for instance recovery, it would not be possible to recover in noarchive log mode. So recovery relies exclusively on the online log.
Sorry I wasted your time, I'll try to be less ambiguous in future

RMAN-08120: WARNING: archived log not deleted, not yet applied by standby

i get RMAN-08120: WARNING: archived log not deleted, not yet applied by standby on primary
but when i run below query i get the same result from primary and standby
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
44051
SQL>
standby is one log switch behind only!

i get RMAN-08120: WARNING: archived log not deleted, not yet applied by standby on primary You already have answer by post of Mseberg.
but when i run below query i get the same result from primary and standby
SQL> select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
44051
SQL>
standby is one log switch behind only!this is wrong query used on primary & standby. even if any one of archive gap available lets suppose sequence *44020* , this archive not transported to standby due to some network problem and so on. later if archives from *44021* all the archives transported on standby upto *44051* , then it shows the maximum sequence transferred to standby, It wont shows applied sequence.
Check the below queries.
Primary:-
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
Standby:-
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
HTH.

Why only videos on iphone can be deleted but not the music or sync photos?

Why only videos on iphone can be deleted but not the music or sync photos?

Because that is the design of the iphone.
Music and photos are added/deleted via the sync process.

CAN NOT log and capture final cut pro

I have written 3 weeks ago... I NEED HELP...
I have Mac G5, Mac os X, 10.4.11 dual 2 ghz power 2 gb ddr sdram
I have external lacies plugged in, have NEVER had a problem log and capturing
until the most recent update with quick time...
Im very upset and need this resolved asap... please help...
I have repaired disks, gone to library / receipts, re downloaded quicktime 7 still nothing
when I try to log and capture, I see my dv playing as soon as I click on capture now
it stops and says... FILE ERROR: UNKNOWN FILE..
PLEASE PLEASE HELP.. too many jobs are due
thanks
Cindy Lambrakis

Rebuilding your startup disk involves erasing it and then reinstalling your software from scratch. If you've not done this in a while, I'd suggest you do it. Back it up first, then go for it.
In the mean time, you might try resetting your PMU button on your mac's motherboard. It's underneath the fan you can remove to install RAM. Unplug your Mac from power completely, then open it, remove the fan, and press the little round button there labled PMU. I've seen this fix up firewire problems.
Jerry

Source DB on RAC, Archived Log Downstream Capture:Logs could not be shipped

I don't have much experience in Oracle RAC.
We are implementing Oracle Streams using Archived-Log Downstream capture. Source and Target DBs are 11gR2.
The source DB is in RAC (uses scan listeners).
To prevents, users from accessing the source DB, the DBA of the source DB shutdown the listener on port 1521 (changed the port number to 0000 in some file). There was one more listener on port 1523 that was up and running. We used port 1523 to create DB link between the 2 databases.
But, because the listener on Port 1521 was down, the archived logs from the source DB could not be shipped to the shared rive. As per the source DB DBA, the two instances in RAC use this listener/port to communicate with each other.
As such, when we ran DBMS_CAPTURE_ADM.CREATE_CAPTURE procedure from the target DB, the Logminer Data Dictionary that was extracted from the source DB to the Redo Logs was not avaialble to the target DB and the streams implementation failed.
It seems that for the archived logs to ship from the source DB to the shared drive, we need the listener on the port 1521 up and running. (Correct me if I am wrong ).
My question is:
Is there a way to shutdown a listener to prevent users from accessing the DB and have another listsener up so that the archived logs can be shipped to the shared drive ? If so, can you please give the details/example ?
We asked the same question to the DBA of the source DB and we were told that it could not be done.
Thanks in advance.

Make sure that the dblink "using" clause is referencing a service name that uses a listener that is up and operational. There is no requirement that the listener be on port 1521 for Streams or for shipping logs.
Chapter 4 of the 2Day+ Data Replication and Integration manual has instructions for configuring downstream capture in Tutorial: Configuring Two-Database Replication with a Downstream Capture Process
http://docs.oracle.com/cd/E11882_01/server.112/e17516/tdpii_repcont.htm#BABIJCDG

Why is my time audio out of sync when I log and capture?

When I log and Capture from my server, it copies everything. But when I play it, that audio doesn't match the video, but when I pause it, it stops on the place it is supposed to be? Anyone have this happen to them before? Please let me know. Thank You!

I don't understand. You log and capture FROM tape. You could log and capture TO your scratch disk which could possibly be over a network. If this is the case, try capturing locally and see if that works. If so. the problem is with your network, not fcp.

Video & Audio Files Logged & Captured Independently. Why?

Hello All,
I've been working with a Panasonic DVX 100B for some time now. I've had nothing but success in shooting footage, and transferring it to my computer using the Log & Capture function. On my latest attempt something has happened that I can't figure out. The video and audio are captured, but they are not linked. In other words, I can find the video file in my Capture Scratch / Project Folder, but when I import it into my project, there is no audio accompanying it. I can however find the audio file in the Audio Capture Scratch, and import that. When placed at the same playhead location on the timeline, they are perfectly in sync. This is nice, but it makes editing an unnecessary struggle.
I tried logging and capturing twice, to see if it was just a glitch. The same thing occurred.
Did I bump something inadvertently? What's happening? Finally, is there a way to permanently connect the audio and video now, or do I need to log and capture again (3rd time being a charm)?
Thanks.
DG

You changed the capture scratch disk setting.
• Uncheck "capture audio and video to separate files".
To link the audio and video
• Once the audio and video are in the timeline and aligned, select them then: Modify>Link (⌘+L)
x

Audio Not Matching Up after Log and Capture

After I log and capture my film on my computer a message puts up and says something like your audio is not aligned with your film you may want to fix the audio. The audio is way off from what I was filming. I tried 3 different Mini DVs and all had the same results. The good thing was I was just trying to make a sort of pump up video for a friend for colleges to look at so it wasn't that vital for most of the film. But when I needed the part where she was speaking about her stats and everything I had to relign the audio to match the movement of her mouth. Did I accidentally change a setting when importing film onto my computer?

hello
You might have captured the media with a different audio sample rate to how it was recorded in the camera. The default, standard audio rate in FCP is 48kHz, so the tape might have been recorded at 32kHz, or alternatively, it might have been recorded at 48kHz but you might have you project set up at 32kHz...
Your capture/project settings should match the media.
You can check the audio rates by looking in the browser window... scroll accross to the column that reads Aud Rate... what does it say?
Then check your sequence by clicking on the timeline and pressing command(apple)+0... this will bring up the sequence settings window... look at the Audio Settings... wgat does it say there?
J.

Attachment deleted log not captured in ECC why?

Similar Messages

Maybe you are looking for