Attachment displaying turn off in email

Ok this is just killing me and I can't figure out how to change the setting or if it is possible.
I work with clients all day long who send me pdf documents via email for projects, i will get upwords of 20-30 a day over 2 megs,
My ipad keeps locking up due to the large file sizes waiting to load to the display in each email.
how do i turn off the feature so that it does not auto display attachments?
or am I missing something
Thank you

Steve Killingback wrote:
That works but it does not allow me to see a preview of the message which would enable me to know if I should read it now or leave it unread until later. Is there a way to do this?
no, there isn't.

Similar Messages

  • TS3700 My ipod stills pauses when the display turns off, even though, my headphones are correctly attached (or flushed)

    My ipod stills pauses when the display turns off, even though, my headphones are correctly attached (or flushed)

    Does this happen still when you use another set of headphones? Have you check to make sure the headphone jack is clean and clear of debris?  If so, the jack may be faulty or damaged meaning you'll need to take or send your iPod in for service/repair.
    B-rock

  • Yoga display turns off after 1 minute

    I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

    This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

  • IPhone keep turning off my email notification

    iPhone keep on automatically turn off my email notification. I've about 10 mailbox configured and iPhone are turning some banners alert, lock screen, etc for the notification off for random mailbox at random time. I turn them on and it happens over and over again. It might be iOS to fight annoying email notification but I've got important email comings in.

    Hi ManiPictures,
    If your iPhone shuts down unexpectedly during use, I would suggest that you troubleshoot using the steps in this article - 
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    As your iPhone's operating system is already up to date with iOS 8.1.1, follow the last instruction - 
    If you still see this issue after updating, contact Apple Support.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • T42 Display turns off after moving

    Hello everybody!
    I´ve got a problem with my Thinkpad T42 (2373fwg), XP prof. with the latest updates running. After installing the latest drivers for display (ati) and for "ThinkVantage Active Protection System " the display turns off immediately after moving the Thinkpad. I can turn the display on again only by reboot. The error appears even in a second after reboot, so it doesn´t concern to windows. The system doesn´t crash, it´s only the display. The problem might concern to the shock sensor, but I don´t know how to solve it.
    Does anyone of you has an idea?
    Thank you and kind regards
    Bill
    Message Edited by billyflinn on 01-26-2009 09:29 AM

    I have a similar problem: T42 (2373-5wg) Screen blanks. At first screen blanking was rare and seemed to happen when moving the pc, but now the screen blanks within 1-3 minutes after turning on the laptop, even if the computer is left untouched after being turned on.
    It is not OS related as the blanking appears even when in BIOS setup or booted on a liveOS CD.
    I can't tell for sure if the system crashes or not as the display goes blank (doh!), however, I have seen no reports of registered crashes in the visible part of the boot process.
    The screen blanking appears quicker (or even instantly) if the computer is warm (e.g. turned off just before being turned on).
    Blanking appears simultaneously on the LCD and on any attached external monitor, so I believe this rules out a defective LCD, backlight or inverter board.
    I'm thinking it's a failing graphics adapter or system board, or maybe a loose connection that causes a component to overheat and fail. But I don't know which or how to fix it.
    It IS out of warranty, of course. Any ideas?
    Thanks in advance,
    Niels
    EDIT: It seems this could be yet another case of badly soldered BGA chips that seems to be troubling the T4x series:
    http://forum.thinkpads.com/viewtopic.php?f=2&t=33952&sid=99545e4d13d9a94ce7496a5022690ed8&start=30
    http://www.technotaste.com/blog/thinkpad-t42-ati-radeon-9600-driver-and-the-blue-screen-of-death-bso...
    Message Edited by NielsCN on 01-26-2009 12:11 PM
    Message Edited by NielsCN on 01-26-2009 02:25 PM

  • In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display

    In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • W520 - now changes to "projector only" whenever display turns off in power save mode

    I have my W520 in a dock with an external monitor. The display is configured to Extend - the external monitor is primary, and the desktop extends onto the W520 screen. I don't have a screen saver. I turn off the display after 30 minutes of inactivity. Until recently both the laptop and monitor screens would turn off after 30 minutes, and then both resume when I moved the mouse or pressed a key.
    Recently, the system has started changing to "Projector Only" when the display turns off. After resuming from power save mode, only the external monitor activates, and the W520 screen is disabled. I have to use Fn-F6 to switch back to "Extend" to re-activate the laptop screen.
    I have rebooted and re-saved the power plan.
    Why has this happened, and how do I fix it?

    Hi, timg11
    I have a few questions so that I may gain a better grasp of this issue:
    1) What is your machine type and model? You can find this information on the bottom of your machine. It should be in format XXXX-XXX.
    2) What is your operating system?
    3) Does this issue occur is the computer is not in the docking station? (Please try if you haven't already).
    Thanks in advance,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Did the most recent update and now my TB Display turns off randomly on both my air and mini. I running  TB Firmware Version:     23.6

    did the most recent update and now my TB Display turns off randomly on both my air and mini. I running  TB Firmware Version:
    23.6

    When did you get this firmware version?  My TBD is at 22.2 and the TBD bus is at 23.4.  I thought I had the latest firmware.

  • White Stripes/Display Turning Off

    Last night I noticed a bunch of white stripes flicker for about a quarter of a second on my display. This happened multiple times. I shut it down with no problems.
    Today I had no problems until everything froze. I could move the mouse, but it would not change from a text cursor. I manually shut it down.
    I turned it back on, after a few minutes I had the same issue.
    I turned it off manually, unplugged the power for about a minute, plugged it back in and turned it on. After a few minutes the white stripes flickered. I decided to back up everything. After about 10 minutes, during the backup process, the screen went black. I could feel that the computer was still on, but the display was black. I manually turned it off.
    I have now been on for about 30 minutes with no problems. The computer was very hot when the display went black. Is it possible that this is an overheating problem?
    Any suggestions?

    The iBook has a seperate display dimming (display turns off) and sleep mode timers. Go into the system preferences>energy saver to set these preferences. When your display turns off you should be able to reawaken it by pressing a key on the keyboard. Turning it off is not the best solution. If the problem happens while you are still using it or it doesn't awaken when you hit a key then you may need to post here again.

  • L305D-S5935 Unresponsive After Display Turns Off

    I have a L305D-S5935 running Windows Vista and it becomes unresponsive after the display turns off as set to do so in the power settings.  I cannot push any key or button or move around on the mouse pad to get it to turn back on.  This is very frustrating and the only way to get it to come back on is to to a hard restart.

    Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections.
    Then reinstall TVAP.
    Toshiba Value Added Package for Windows Vista/7 (32)(v1.2.33; 11-09-2009; 43.67M)
    - Peter

  • Turning off forum email notifications

    Hello,
    Has anyone worked out how to turn off the email notifications from the forums.
    Please help!!!

    Here is where it's done:
    Then:
    Good luck,
    Hunt

  • Could you please tell me how to turn off the email sign-in and password function when I open Itunes on my computer - I don not wish to sign in every time

    could someone please tell me how to turn off the email sign-in and password function when I open Itunes on my computer - I don not wish to sign in every time

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Windows 8.1 Screen Locking at Display Turn Off (instead of only at Sleep)

    Hi All,
    I am having this issue with clients running Windows 8.1 Enterprise, which we are planning to deploy later on this summer.
    We currently have a GPO setup for managing the power settings on our staff computers:
    This GPO sets computers to sleep after 1 hour, but turn off the monitor after 5 minutes of inactivity
    On our Windows 7 systems, the policy applies correctly and if our staff uses their computer before 60 minutes of inactvity (before they go to sleep),
    the screens will just turn back on without prompting for login.
    I have noticed however on our Windows 8.1 test computers, in the same OU, which receive this policy, that after 5 minutes when the screen goes off, if a staff member attempts to use their computer they will be prompted for a password even though the
    unit was not in sleep mode.
    Further more, I've noticed that on the Windows 8.1 Systems, I am able to override the "Require a Password on Wakeup" setting using the metro interface, as pictured below (the setting does change in power options as seen below), and does stay in
    the No setting even if I run gupdate and reboot.
    Any idea how to keep the Require Password for waking up, but not just for computer with the screen powered down?
    (I should also not screen savers are not being used)

    Hi,
    You can tried also set the item Sleep: After 60 min to see what's going on.
    On my laptop, once I configure this, the display turns off without lock the computer.
    Kate Li
    TechNet Community Support

  • I asked a discussion question and now I'm receiving 100 emails a day with discussion questions.  How do I turn off the email notifications?

    I asked a discussion question because of a software problem with my Mac Pro and now I've getting about 100 discussions email notifications a day to my personal email account.  Can anyone tell me how to turn off the email notifications?
    v/r,
    Mario

    Hi Mario,
    Go here...
    https://discussions.apple.com/people/mguerrier63
    Choose Manage eMail notifications, then again under Edit Preferences>Email Notification tab.

  • How do you turn off the email notifications but not the phone

    When I go to bed I want the email "notifications: off, but not the phone.I figured out how to turn off the email notifications at night. But, I want the phone to be able to "ring?"
    Thanks

    Settings, general, sounds, scroll down to new mail, tap, then alerts, none.

Maybe you are looking for

  • How to keep files in the cloud until I actually want to copy them to my hard disk?

    I have an iCloud Drive 1TB tier and have approx. 500gb of data at present that I would like in the cloud however I cant seem to get the data to stop showing on my local drive. How do I get the data to be in the cloud until I want it - OS X Yosemite

  • Vendor consignment reports

    Hi, Are there any standard reports that would display the items set up for payment but not yet paid and the items paid for vendor consignment materials. I think FBL1N would work but i need to see the invoice number and the material number on the repo

  • Service Order Component User Status

    Hello All - Has anyone successfully tied a user status profile to the component item on the service order?  I've added the object type from BS12 and BS02, but I can't find a configuration assignment at the component level.  Any help is greatly apprec

  • CO Activities for New Plant

    Dear Experts, I am an FI consultant and involving CO module also working for a Roll out Project. We already created a Co. Code, one Plant for New production (EOU) unit.    Now we are planning one more plant with Direct Sales activity. I want to prepa

  • ZEN mozaic 8GB forgot the security password

    Hi! I need some help about my zen mozaic. i've been working for so long to solve on how to reset my password on my mozaic. is their any possible way to reset it's or should i trow it away?