Attachment from SUS to ERP

Hello All,
We have SUS-MM integration implemented. We would like to know if anyone has implemented attachment from SUS to MM.
Thanks,
Ajay

Hi Ajay,
For this please refer to note number 780923. You need to implement Badi BBP_SAPXML1_IN_BADI. Though this is for sending attachments from MM to SUS. You can take some cues from it.
Rgds,
RRK.
Do Reward points for useful hints
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 8:54 AM

Similar Messages

Sending PO with attachment from SRM to ERP

Hi Experts,
My requirement is to Send PO with attachment from SRM to ERP.
I can get the attachment in the payload as mentioned in https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3509. [original link is broken] [original link is broken] [original link is broken]
But how to post this attachment into the target ERP system so that it gets saved as an attachment in the Purchase Order.
Thanks & Regards,
Shobhit

Hi Shobhit,
I asume, the PO is send as an IDOC to ERP?
In this case, you have no chance to attach the attachment.
A wortkaoud would be to extract the needed date from the attachment and map the values into correcponding fields of the PO-Idoc.
Regards Mario

PO/ASN Attachements in SUS to ERP

Hello All,
Is there any SAP notes or how to guide available to send attachments with confirmation (SUS) and po request (from buyer - ERP).
Please refer.
Regards
Palaniappan

Hi - this question has been marked as "Answered" - but can somebody post how they achieved this?
Many thanks

POR not transfering from SRM to ERP

Hi Experts,
We are working with extended classic scenario on SRM 7.0 & ERP EHP4.
We are creating POR manually in SRM and also recieving POR from SUS system.
When we accept the POR it is not updating the ERP.
We have enabled the PI scenario for transfering POR from SRM to ERP by using the Proxy and IDOC(ORDRSP) but the XML is not generated when the POR is accepted.
Can any one help me how to transfer the POR created in SRM to ERP.
Is there any way we can generate XML message of POR with status Accepted.
Regards,
B.N.Karthikeyan

Hi,
I have tried this define event option.
Still XML not generated for POR.
Regards,
B.N.Karthikeyan

Deactivate integration between SUS and ERP-MM

Dear Expert,
I have one requirement from user that all supplier invoices created in SUS must be block/park status in ERP-MM. I notice that there is ABAP effort here in order to facilitate the requirement. Prior to do that the automation invoice verification in ERP-MM must be disconnected from SUS, I believe somebody has experience before. Appreciate if you can share how to deactivate that setting.
Best regards,
Mahnansa

HI, Mahnansa
you can check the NOTE:501524.mybe helpful
Bestregards
Alex

Accesssing the web from SuSe using firefox

I just loaded SuSe and it came with firefox. I can only access a limited very limited number of web pages. Is there some parameter change I need to make in order for firefox to be able to access other things on the web from SuSe?

I do not know anything about Firefox on SuSe. I use the standard Mozilla or the Ubuntu versions myself, but I doubt there is some hidden parameter to change.
*Are you using a special Firefox version from the SuSe distro ?
*What are the error messages, are you able to paste them into your reply or attach a screenshot ?
*is this your computer and did you install SuSe yourself
*What security or filtering software are you using?

How do i open an e-mail attachment from WINDOWS

heres my question
Someone approached me in church today,they know i have a Macbook
They recieved an e-mail with an attachment from someone else
they went to open the attachment,Right away Microsoft Office opened and told them their TRIAL had expired.
I recommmended they look in Spotlight and also under system preferences in the blue apple
What he needs in something In the Macbook Already that will open the attachment so he can read it.
Will the trial version of I-Work do it?
he is looking or something quick that will work
thanks

CoffeehouseSchmuck,
The attachment is evidently a Word file, and the person in question evidently just clicked on the attachment in the email message. When you do this, Mail will attempt to have the associated application open the attachment.
The first problem is that only a trial version of Word is present, and the second is that the person in question is simply clicking on the attachment. First, get the attachment to the Desktop by dragging it there (or using the "Save Attachment.." button in Mail).
Once the attachment is on the Desktop, select it, then press Apple-I to open a Getinfo window for it. Use the "Open With.." pull-down to change the default application to open this type of document, then click the "Change All" button.
Text Edit will open Word documents, but the formatting might be funky. However, this should be sufficient for simply reading attachments. An iWork trial version of Pages will be able to handle it with all formatting in place, but this will only work until the trial expires.
Ideally, the person in question should acquire either MS Office or the free NeoOffice.
Scott

Unable to open URL attachment from SBWP in CRM WEB UI

Hello Gurus,
Need your help please. I'm having some problem opening the URL attachment from SBWP via CRM 7 WEB UI (I used a Transaction Launcher for SBWP). The attachment is a Webdynpro application. I am able to open the attachment in SAP GUI, but not in CRM WEBUI. This problem occured when we update the SP level of CRM 7.
Here's the scenario,
- whenever I click the attachment, it open a new window, which also happen even before SP level update, with the following information:
Execute an Application on FrontEnd
Please wait. You will be forwarded automatically.
This page is included for technical reason.
Execute program.
Status: Displaying Office Document ..........
After a couple of seconds, it will return to the Workflow Workplace screen.
I have checked the workflow log and found no inconsistency on the attached URL.
Immediate response would be highly appreciated. Thanks in advance.
Regards,
Edwin

Thanks for the reply WD ABAP.
Yes, I did try to use the functionality of Worklist and the URL attachment successfully opened. However, there are some limitation in its functionality as indicated in the link below that opted us to use the SBWP in CRM WEB UI via transaction launcher.
http://wiki.sdn.sap.com/wiki/display/CRM/CRMWorklist-AdvancewithDialognotSupported
We don't want to adjust the logic of our existing workflow at this point as described in the above link as it will entails end-to-end testing again. We just encountered this issue when we update the SP level of CRM 7.
Hope there is an alternative solution without shifting us to Worklist.
Regards,
Edwin

Open attachment from AOL mail

when i download a attachment from AOL mail I get a message "Adobe Reader could not open (name of file) it is not a supported etc

What is your operating system? Reader version?
If you download the attachment to your local disk first, then open it from there, does it open?

Read a file sent as an attachment from CPSC

I have a requirement where in CPO has to read a text file sent as an attachment from portal (cisco prime service catalog), Is there a way to query RCdatabase to fetch Document ID and retrive the file and read the file. If this approach is not feasible, is there an alternate way to host the text file in an external location and pulled from there?

Hi,
is the next part of the code correct.
What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
You can also try below link..
Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
Hope this helps.
Regards,
-Sandeep

Transfer of data from APO to ERP via IDOC

Hi,
I know we can transfer the of transactional data(Planned orders) from APO to R/3 is done via CIF.
Suppose if I need to transfer the same via IDOC instead of CIF how can I do it?
Let me know the steps to follow and way to find out how the data got transferred by IDOC?
For e.g. When I have transfer a planned order from APO to ERP, the data should be populated in the IDOC LOIPRO01 on the ERP side.
Cheers,
Simha.

Hi,
For a thouht If you want to use that IDOC data to be transfer to an other system from R/3 then let the data flow through CIF and in INBOUND exit wright code to create IDOC.
But Iam not sure whether it works.
Please eloborate requirement.
Regards,
Kishore Reddy.

Reading an PDF Attachment From Sender Mail Adapter

Hi All,
               i am able to get a mail from my Mail Server, But my aim is need to Read an PDF attachment from the mail, in SXMB Moni i am getting the Payload with attachment, I have a created a module to convert that PDF to XML(Module is working fine in file to file sceneraio) .
In adapter should i need to use Payload Swap Bean Module also , because in sap help said that i need Select Keep Attachments. I want to know how that how to Push the PDF attachment to My Custom Module which is used to convert the PDF To XML.
If Payload Swap Bean Module needs to be Used , please tell me the Key Names and Key Values to be used.(swap.keyName,swap.keyValues)
Thanks and Regards,
Kamal
Note: Points will be awarded

Kamal...
See if this helps
[Module Name]
AF_Modules/PayloadSwapBean
[Module Parameters]
The following parameters are used for this module
swap.keyName          the name of a supported attribute.
swap.keyValue         the value of a partial string that is required
                        to appear.
The supported attributes (swap.keyName) include the payload attributes
such as payload-name, payload-description and any content attributes
such as content-type, content-disposition, content-description, etc.
Regards
Ravi Raman

When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?

When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?

gonsa47 wrote:
When I open it in pages or word the correct company logo appears.
Does the mail app display whatever is in the document without the ability to differentiate between hidden or non hidden images?
The mail app will not display fillable form fields in PDF files that can be seen in real PDF apps. I say real PDF apps because the form fields in PDF apps will not appear in the iBooks app either. IMO, iBooks is not a real PDF app.
So, I would say that the mail app cannot differentiate between hidden and non hidden items

I can't use thunderbird 31.2.0 to send attachement from a pdf file with Acrobat PRO XI

I can't use thunderbird 31.2.0 (Mozilla) to send attachement from a pdf file with Acrobat PRO XI. Each time, Acrobat replies (in french) : "il n'y a pas de client pour la messagerie par défaut". Thunderbird is indicated as "by default" in the list of programs of Windows.
Even if I type my e-mail address, etc. in the account of Acrobat, it doesn't change. Each time, I have to record a PDF file in a folder and return to Thunderbird to send it as attached. It is a too long process, compared with Windows XP with Acrobat Reader or Acrobat 5, I had before.
Would you please help me to explain the process. My OS is Windows 8.1.
Thank you

Thank you for your answer.
What i want to do : to send PDF files as attached documents in a message
generated by thunderbird by my e-mail address [email protected] or
another one I have.
When I introduce my e-mail address under Edit-Preferences-Email
Accounts, Acrobat ask the e-mail account, the password, the IMAP for
ingoing message (and I use POP) and SMTP for outgoing messages. Even I
introduce all the datas, it doesn't change, Acrobat is unable to send
the message. And the process is not convenient, because I need all my
outgoing messages be documented inside Thunderbird.
So, I repeat my request : how can I use thenderbird as program by
default from Acrobat or any other software ?
Thank you for your next message.
Jean-Luc Rongé
Le 21-10-14 14:24, ANAND8502 a écrit :
>
I can't use thunderbird 31.2.0 to send attachement from a pdf
file with Acrobat PRO XI
created by ANAND8502 <https://forums.adobe.com/people/ANAND8502> in
/Acrobat Installation & Update Issues/ - View the full discussion
<https://forums.adobe.com/message/6850947#6850947>

How to download PDF attachment from gmail on iphone 5S

Hi,
How to download PDF attachment from gmail on iphone 5S
Regards
Ram

Hello Ram2910
You should be able to view them natively within iOS. If you can view them in safari and want to save them, then download iBooks or search for other apps that can view and save them.
iBooks
https://itunes.apple.com/us/app/ibooks/id364709193?mt=8
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch
http://support.apple.com/kb/ht4227
Regards,
-Norm G.

Attachment from SUS to ERP

Similar Messages

Maybe you are looking for