Attachment id has bad format

I get error message 'attachment has bad format id' when I'm try to sent a attachment in hotmail.com started when I upgraded to mac os x version 10.7

Try removing spaces from the filename - that worked fine for me. Seems like one of the penalties of using Hotmail...

Similar Messages

Hotmail help says to optimize Firefox to correct Attachment ID has bad format problem when there is not attachment - how do I optimized Firefox 3.6.12?

Several day ago my Hotmail acct seemed to be hacked as the following email
''I think this is a nice website,I like it very much.If you have time please browse it.Maybe you can find some products that are suitable for you.Their priciple is :100% original and brand new,100% satisfied! Their address http://dpzc.net/#512.com/img/26_qtr.jpg/
Email：[email protected]
Msn: [email protected]''
was sent to my entire address book, and now when I try to sent a hotmail I get an error message saying Attachment Id Has Bad Format, even though there is no attachment. (This problem does not happen in IE8)
I did Hotmail help and their response was ''''I advise you to optimize your browser. If you have a browser that’s not Internet Explorer, you can visit its Help section.''''
How do I optimize Firefox 3.6.12?
or what other suggestions do you have

Delete any traces of Silverlight from your HD, you will be able to send attachments normally thereafter.

Hotmail "Attachment ID has bad format"?

I cannot send attachments or forward them on Hotmail due to error message "Attachment ID has bad format"? Any suggestions?

Douglas188 wrote:
I cannot send attachments or forward them on Hotmail due to error message "Attachment ID has bad format"? Any suggestions?
Hotmail are having a few hiccups at the moment. It may pay to go to their site and check their troubleshooting tips.
Pete

Why does it say Attachment Id has bad format when I try to reply or forward e-mail from my hotmail site??

I receive an e-mail from a friend lets say....I then send it to some friends....they reply back to me saying... Ha Ha Ha Ha....I then want to reply back but it won't send...saying...Attachment Id has bad format...yet I've sent it once already? I don't get it.

Delete any traces of Silverlight from your HD, you will be able to send attachments normally thereafter.

After installing lion I get"Attachment Id has bad format" when trying to send an attachment in Hotmail. Any ideas

After installing the new lion, I can no longer send attachments in my hotmail account, I get "attachment Id has bad format". Any ideas?

THANK YOU !!! THANK YOU !!!
I took the time to actually set up and sign in to be able to say thankyou for the info - my Apple techs up hear in the North had NO clue on how to solve my problem - sending attatchments is my business and I was out of it since Oct. 14th
THANK YOU AGAIN - IT WORKED PERFECTLY JUST HOW YOU SAID

ID attachment has bad format?

Hi there,
I have deleted silverlight from mac and still can't send any attachment from hotmail account
please help me out from this issue
have a good time
cya:)

Have you upgraded to the new MS Outlook web-based messaging system? I've never used Hotmail, so don't know a thing about it, but I've read some good reports about the new Outlook. Don't know if it has IMAP access (which Hotmail was missing) but I may be willing to give it a try... maybe you should upgrade?
Clinton

Illustrator File Will Not Open - Error message "Object label badly formatted"

I have been working on a large image file for one of my classes; it has many layers and custom swatches, no text. I work on Creative Cloud at home, CS6 at school, and I think I had my .ai file saved under legacy file format CS4 trying to be safe (because I was not sure of my school's version and I have had a lot of problems accessing my files at school because of the version differences). I have been working on it back and forth between computers for quite a while, and today--while I had the image on my computer recently--it says "Acrobat PDF File Format is having difficulties: Object label badly formatted" if I try to open it.
I have tried: updating Adobe Illustrator; creating a new AI document and "placing" the file into it; opening the file in Acrobat (the file opened, which was a step...but it only showed a tiny portion of the artwork and left the rest blank. Under the tools, however, it still showed the image had 15 layers (under the layer menu)--and it had them marked them as "visible"--but there wasn't anything I could do to actually view them; I tried copy/pasting into illustrator from Acrobat; opening in Acrobat and "saving as" a PDF (it said "The document could not be saved. There was a problem reading the document (111)"; and I just did a system restore hoping that could exorcise the demons--but no such luck so far.
Do you have any ideas? I would greatly appreciate any words of wisdom and support you might have...and chocolate.
Thanks for reading this.

We now understand the problem, and are testing a solution. Here's my current understanding of all the elements of this issue.
CAUSE: The problem occurs in an interaction between Illustrator CS4, Suitcase Fusion 2 v13.2, and having an Illustrator document with one or more text boxes, containing text, which is *completely* off the artboard—not even the bounding box is touching the artboard. *Additionally*, there must also be at least one text box, with text in it, which is *on* the artboard (even so much as having the bounding box partly on the artboard is sufficient, again). When these conditions are met, saving the document *may* (but does not always) cause the problem.
PROBLEM: Attempting to open an affected document in Illustrator CS4 fails, with an "object label badly formatted" error. The problem can occur with older illustrator documents opened in CS4, as well as native CS4 documents.
UNAFFECTED: Despite any speculation in this thread, this problem does not affect Photoshop, nor has it occurred with any version of Extensis Suitcase older than Suitcase Fusion 2 v13.2, which shipped about eight days ago.
SOLUTION: The problem should be resolved by a 13.2.1 dot release. Although things could be delayed if we find something unexpected in testing, we currently expect to have the fix available this week, probably tomorrow (Thursday).
DOCUMENT RECOVERY: Extensis can fix any Illustrator CS4 document which exhibits this problem. For now, contact Extensis tech support if you need help with recovering any such Illustrator document. Be prepared to send tech support the affected Illustrator file(s). You can use the online contact form at http://www.extensis.com/en/support/contact_prod_support.jsp, or call tech support at 1-503-274-7030.
Special thanks to the users whose suffering and detailed reports helped us figure this out!
Regards,
T
Thomas Phinney
Sr Product Manager, Font Solutions
Extensis, a division of Celartem, Inc.

Why can I not open a attachment that has the suffix .mpe?

A friend and I both received an email with an attachment that has the suffix .mpe. When I try to open it I get a message that Quicktime can not open the file- that it is in a format that Quicktime doesn't understand. I wrote both the friend and the sender and they say their machines open the attachment. If I drag the attachment to my desktop and change the suffix to .mpeg I can open the file.
I don't know if it is relevant, but they are both using mountain lion and I am using snow leopard.
Is there a logical explanation for my inability to open the .mpe attachment?
Thanks
Dave

I am hesitant to believe that the reason they can open the file and I can't is because they are running mountain lion and I am not. It would seem to me that Quicktime is Quicktime no matter which operating system one is using, or...?
Incorrect. It's not so much the system itself, but rather the QT structure embedded in the OS together with the different player apps. They are probably running QT X v10.2 (603.6) while you are likely using QT X v10.0 (131) and there have been some major changes between the two during the interim. E.g., try playing "muxed" MPEG-2/AC3 content to see the difference in audio support between OS v10.6.8/QT X v10.0 and OS v10.8.2/QT X v10.2. Another major change was the disabling of legacy codecs—they're probably still enabled on your system but disabled by default on their systems unless they re-enabled them. To say the least, QT is constantly changing and that is why so many people are here trying to find out why something works or doesn't work in one instance but is totally backwards following a certain OS upgrade or app/security update.

Recovered files "object label badly formatted" .ai files

I just had a mishap where all of my graphic files were deleted due to operator error. I bought a file recovery software which said it supported .ai files, and they show up like a normal .ai file but when I try to open them in illustrator I get the following error:
Acrobat PDF File Format is having difficulties. Object label badly formatted.
If anyone has a possible idea on how to access these files again, please let me know, I lost a ton of illustrator work that can not easily be re-drawn.
Thanks

I keep finding posts about CS4 and .pdf files having this issue, but none that seems to parallel my issue. I am working in CS3 (primitive I know, I just haven't had the funds to upgrade). Thanks for posting, but I am not on a MAC but will have access to one tomorrow at work. I will try your suggestion on my lunch hour and hope that works.

Illustrator CS4 error: Object label badly formatted?

has anyone received an error in illustrator CS4: Acrobat PDF File Format is having difficulties. Object label badly formatted? I am ON a mac and cannot open files after this error, help?

We now understand the problem, and are testing a solution. Here's my current understanding of all the elements of this issue.
CAUSE: The problem occurs in an interaction between Illustrator CS4, Suitcase Fusion 2 v13.2, and having an Illustrator document with one or more text boxes, containing text, which is *completely* off the artboard—not even the bounding box is touching the artboard. *Additionally*, there must also be at least one text box, with text in it, which is *on* the artboard (even so much as having the bounding box partly on the artboard is sufficient, again). When these conditions are met, saving the document *may* (but does not always) cause the problem.
PROBLEM: Attempting to open an affected document in Illustrator CS4 fails, with an "object label badly formatted" error. The problem can occur with older illustrator documents opened in CS4, as well as native CS4 documents.
UNAFFECTED: Despite any speculation in this thread, this problem does not affect Photoshop, nor has it occurred with any version of Extensis Suitcase older than Suitcase Fusion 2 v13.2, which shipped about eight days ago.
SOLUTION: The problem should be resolved by a 13.2.1 dot release. Although things could be delayed if we find something unexpected in testing, we currently expect to have the fix available this week, probably tomorrow (Thursday).
DOCUMENT RECOVERY: Extensis can fix any Illustrator CS4 document which exhibits this problem. For now, contact Extensis tech support if you need help with recovering any such Illustrator document. Be prepared to send tech support the affected Illustrator file(s). You can use the online contact form at http://www.extensis.com/en/support/contact_prod_support.jsp, or call tech support at 1-503-274-7030.
Special thanks to the users whose suffering and detailed reports helped us figure this out!
Regards,
T
Thomas Phinney
Sr Product Manager, Font Solutions
Extensis, a division of Celartem, Inc.

HTMLDocument ending with SUB TAG=bad formatting

Hi, I have a problem when tring to format text in JTextPane in HTMLDocument. When the text ends with and I call document..setCharacterAttributes(0, doc.getLength(), attrs, false) text formatting goes wrong!!
Why? Is it not possible to end text in document with "textsub text"?
I prepared some sample code below, which should clarify what I want. Click one of 4 buttons to setText, then click repeatedly Format button to change its format.
I want to know what am I doing wrong and how to do it right. Problem lies in calling method setCharacterAttributes. When changing its parameters I get different formattings, and not the one I expect :-( .
When the formatting goes wrong all characters are put inside SUB tag. HTML code then looks like this:
<html>
<head>
 //<--This SUB tag is is added too
 </head>
<body>
 text that had many sub tags and now has none and is inside this sub tag, when this tag shouldnt exist
</body>
</html>Please HELP!!!
Sample code below
import javax.swing.text.*;
import java.awt.*;
import javax.swing.text.html.*;
import javax.swing.text.html.HTML.*;
import java.awt.event.*;
import javax.swing.*;
public class Example extends JFrame {
JScrollPane sp;
JTextPane textPane = new JTextPane();
HTMLEditorKit htmlKit;
JButton text1Button = new JButton("short SUB text");
JButton text2Button = new JButton("long SUB text");
JButton text3Button = new JButton("long SUB text ending with text");
JButton text4Button = new JButton("long normal text");
JButton formatButton = new JButton("Format");
StringBuffer text1,text2,text3,text4;
Font font = new Font("Arial",Font.ITALIC,14);
public Example() {
 this.setTitle("SUB TAG bad formatting Example");
 this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 this.setSize(700, 400);
 htmlKit = new HTMLEditorKit();
 HTMLDocument doc = (HTMLDocument)htmlKit.createDefaultDocument();
 textPane.setContentType("text/html");
 textPane.setEditorKit(htmlKit);
 textPane.setDocument(doc);
 sp = new JScrollPane(textPane,
 JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,
 JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
 JPanel menuPanel = new JPanel();
 menuPanel.add(text1Button);
 menuPanel.add(text2Button);
 menuPanel.add(text3Button);
 menuPanel.add(text4Button);
 menuPanel.add(formatButton);
 text1Button.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 textPane.setText(text1.toString());
 text2Button.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 textPane.setText(text2.toString());
 text3Button.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 textPane.setText(text3.toString());
 text4Button.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 textPane.setText(text4.toString());
 formatButton.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 setJTextPaneFont(textPane,font,new Color((float)Math.random(),(float)Math.random(),(float)Math.random()));
 text1 = new StringBuffer();
 for (int i=1;i<10;i++) {
 text1.append("a"+i+" ");
 //text1.append(" ");//<--Add this line to get it working, however moving cursor behind any number and pressing Format, results same format error
 text2 = new StringBuffer();
 for (int i=1;i<1000;i++) {
 text2.append("a"+i+" ");
 //text2.append(" ");//<--Add this line to get it working, however moving cursor behind any number and pressing Format, results same format error
 text3 = new StringBuffer();
 text3.append(text2+"END");//moving cursor behind any number in sub tag and pressing Format, results same format error
 text4 = new StringBuffer();
 for (int i=1;i<2000;i++) {
 text4.append("a_"+i+" ");
 JPanel mainPanel = new JPanel();
 mainPanel.setLayout(new BorderLayout());
 mainPanel.add(menuPanel,BorderLayout.NORTH);
 mainPanel.add(sp,BorderLayout.CENTER);
 this.getContentPane().setLayout(new BorderLayout());
 this.getContentPane().add(mainPanel,BorderLayout.CENTER);
public static void setJTextPaneFont(JTextPane jtp, Font font, Color c) {
 MutableAttributeSet attrs = jtp.getInputAttributes();
 StyleConstants.setFontFamily(attrs, font.getFamily());
 StyleConstants.setFontSize(attrs, font.getSize());
 StyleConstants.setItalic(attrs, (font.getStyle() & Font.ITALIC) != 0);
 StyleConstants.setBold(attrs, (font.getStyle() & Font.BOLD) != 0);
 StyleConstants.setForeground(attrs, c);
 StyledDocument doc = jtp.getStyledDocument();
 doc.setCharacterAttributes(0, doc.getLength(), attrs, false);
public static void main(String[] args) {
 Example frame = new Example();
 //Center the window
 Dimension frameSize = frame.getSize();
 Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
 if (frameSize.height > screenSize.height) {
 frameSize.height = screenSize.height;
 if (frameSize.width > screenSize.width) {
 frameSize.width = screenSize.width;
 frame.setLocation((screenSize.width - frameSize.width) / 2, (screenSize.height - frameSize.height) / 2);
 frame.setVisible(true);
}

Thanks for the dukes.
Actually I have very little knowledge about html handling in java. On you particular problem, I just went and browsed through the source code in search for the sub tag (which I didn't know before by the way) to see what effect it had on the StyledDocument.
As far as your performance problem in loading html pages, my best advice would be to conduct experiments and try to see where the bottleneck is. I know that there is a way to make setPage synchronous. It has to do with setting some variable in the Document (I guess searching the forum might help on this). This can make it easier to actually measure how long it takes. Moreover, you might want to try and load a small page first and then your heavy one : that way you'll know if it has to do with loading the classes of the HTMLEditorKit. Another advice would be to make sure you feed your JEditorPane with pure HMTL 3.2. I have no idea about this but maybe parsing unknown tags slows down the loading (pure guess). One last advice would be to make multiple versions of your file with slight modifications in each case (like remove the tables, for instance). That might help determine if it has anything to do with the actual content you're trying to load.

UTL_MAIL: ORA-29279..... 501 badly formatted MAIL FROM user - no " "

Hi guys,
I’m trying to redesign a current process that requires a large amount of manual intervention. As such I’d like to utilise UTL_MAIL to send notifications of system events but have been unable to get it to execute on my dev database (installed on my local PC).
O/S ver:
Windows XP SP3
Oracle ver:
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
I’ve configured the smtp_out_server parameter:
SQL> sho parameter smtp_out_server;
NAME TYPE VALUE
smtp_out_server string XXX.XXX.XXX.80:25
And installed the required Oracle built in packages:
SQL> @C:\oracle_builtins\utlmail.sql
Package created.
Synonym created.
SQL> @C:\oracle_builtins\prvtmail.plb
Package body created.
No errors.
I’ve compiled a simple test version of the code:
CREATE OR REPLACE PROCEDURE test_email IS
BEGIN
UTL_MAIL.send(sender => '[email protected]',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
+/+
SQL> @C:\procs\email_proc.sql
Procedure created.
However when I execute it I get the attached error(s):
SQL> execute test_email ;
BEGIN test_email ; END;
*+
ERROR at line 1:
ORA-29279: SMTP permanent error: 501 badly formatted MAIL FROM user - no <
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 222
ORA-06512: at "SYS.UTL_MAIL", line 397
ORA-06512: at "SYS.UTL_MAIL", line 608
ORA-06512: at "SYS.TEST_EMAIL", line 3
ORA-06512: at line 1
I’ve also confirmed with our mail team that the sender is included in our firewall config and should not be being blocked……
Any ideas? Does the package produce any log files / alerts that I could check or is it possible to execute in a verbose mode so I can debug?
Thanks,
Chris

Welcome to the forum.
That error comes from your SMTP server, and it indicates there's something wrong with the email address.
You could try the following and see if that works:
CREATE OR REPLACE PROCEDURE test_email
IS
BEGIN
UTL_MAIL.send(sender => 'test <[email protected]>',
 recipients => '[email protected]',
 subject => 'UTL_MAIL test subject',
 message => 'UTL_MAIL test body'
END;
/Some more inputs can be read here: Reg.SMTP Error while using UTL_MAIL in Oracle 10g
Also, when you want post formatted examples, just use the {noformat}{noformat} tag before and after your examples.
So, when you type:
{noformat}select *
from dual;{noformat}
it will appear as:select *
from dual;when you post it.

How do I reformat an IPod Touch for Windows that has been formatted for a Mac? All instructions I have been able to find use ITunes or Device Manager to reformat. My IPod is not being recognized by ITunes or in Device Manager.

I have an IPod Touch that has been formatted for a Mac. All instructions I have been able to find use ITunes or Device Manager to reformat the device for Windows. This cannot be done if Windows doesn't recognize the device. Is there another way to set the device back to the factory settings directly on the device without using ITunes?

Ipod touch is not formatted one way or the other at all.
Just sync it to the new computer using itunes.
iPod touch User Guide (For iOS 5.1 Software)

Can I backup to an external hard drive that has been formatted with windows?

Hi, I am fairly new to mac. I was wondering if I can backup my mac book pro using time machine to an external hard drive that has been formatted with windows. Time machine is saying it must erase to the hard drive in order to do a backup? Please help.

No it has to be formatted for OS X. Mac Extended (Journaled).

Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

Can you post an ipconfig /all from the server and the DC?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Attachment id has bad format

Similar Messages

Maybe you are looking for