Attachment in mail shrinks

Hello,
When I go to place an attachment in Mail, a image or jpg, it "shrinks" the size of the file. I have a jpg which is 2048 x 1536 pixels and approx 1MB in file size but when I place it in an email using apple Mail, the file size shrinks down to 320 x 240 pixels and 156KB. There must be a setting or preference or something that is doing this? I've tried to find it but can/t...any help is much appreciated!
Thanks much!
Mike

Michael,
Part of what you are seeing is deceptive and part may be the settings.
After dragging the image to the email message, highlight the image and look down in the lower right of the message frame. You should see a little drop-down menu labeled "Image Size". If it says anything other than "Actual size" then it *+is being reduced.+*
But if it says "Actual Size" then what is sent will be full size, even though it does not appear that way within the message. When the recipient downloads the image it will be delivered full size. You can test this by sending yourself the image set to "Actual Size". Alternatively, you can CTRL-Click the image and select "Quick Look Attachment" then click the opposing arrows to expand it full screen. You will see that the image is intact and not pixilated. If the image was being reduced, a full screen Quick Look would show it pixilated.
Hope this helps. Cheers!

Similar Messages

  • Fetch data from table and generate attachment than mail it.

    Hello Experts,
    From couple of day I am searching on Google for a better database procedure that will help me to get data from tables and generate attachment and mail it but i fail.
    My Scenario is:
    I have a query that will fetch almost 5000 records from database tables. Each record has almost 75 characters
    select a.location_code,
                   a.item_code,
                   b.description item_desc,
                   to_char(a.manufact_date,'ddMonyy')mfg,
                   to_char((a.manufact_date + nvl(b.expiry_period,0)),'ddMonyy')expr,
                   to_char((a.manufact_date + nvl(b.qurantine_period,0)),'ddMonyy')qrtn,
                   round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) days_elapsed,
                   a.closing_balance_posted quantity
              from wms_stock_current_balance_v a, wms_item_setup_mast b
             where a.closing_balance > 0
               and a.item_code = b.item_code
               and a.loc_type in ('RACKING','PICKING','QUICKA','BUNDLED')
               and nvl(b.qurantine_period,0) > 0
               and round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) <= 0
          order by a.item_code, a.location_code;
    Sample data of above query is
    LOCATION_CODE
    ITEM_CODE
    ITEM_DESC
    MFG
    Expiry
    Quarantine
    Days Elapse
    Quantity
    13DL2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    14DL0
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    23-Feb-10
    3-Apr-14
    7-Jun-13
    -119
    134
    14DL2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    23-Feb-10
    3-Apr-14
    7-Jun-13
    -119
    160
    14DR2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    23-Feb-10
    3-Apr-14
    7-Jun-13
    -119
    20
    14LL2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    17ER2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    17GL2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    17SL0
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    17-Feb-10
    28-Mar-14
    1-Jun-13
    -125
    64
    18QL0
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    23-Feb-10
    3-Apr-14
    7-Jun-13
    -119
    160
    19AR5
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    17-Feb-10
    28-Mar-14
    1-Jun-13
    -125
    160
    19DL1
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    19JR0
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    17-Feb-10
    28-Mar-14
    1-Jun-13
    -125
    60
    19TL1
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    160
    20GR2
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    20-Feb-10
    31-Mar-14
    4-Jun-13
    -122
    40
    36FL3
    000000000000000F0487
    CLEAR COOL BLACK 05ML
    18-Feb-10
    29-Mar-14
    2-Jun-13
    -124
    65
    19UR0
    000000000000000F0591
    COMFORT WHITE 24ML*300
    28-Oct-09
    28-Oct-11
    1-May-11
    -887
    1
    12SL1
    000000000000000F0593
    COMFORT PINK 24ML*300
    28-Oct-09
    28-Oct-11
    1-May-11
    -887
    42
    12SR1
    000000000000000F0593
    COMFORT PINK 24ML*300
    28-Oct-09
    28-Oct-11
    1-May-11
    -887
    42
    14OR1
    000000000000000F0593
    COMFORT PINK 24ML*300
    28-Oct-09
    28-Oct-11
    1-May-11
    -887
    8
    36EL4
    000000000000000F0594
    CLEAR HF DECRASE 5M*360
    14-Feb-10
    14-Feb-11
    12-Oct-10
    -1088
    14
    13VL1
    000000000000000F0595
    CLEAR COM SFT CRE 5*360
    8-Feb-10
    8-Feb-11
    6-Oct-10
    -1094
    160
    14ER0
    000000000000000F0595
    CLEAR COM SFT CRE 5*360
    8-Feb-10
    8-Feb-11
    6-Oct-10
    -1094
    105
    Database Info
    Oracle 10g
    Version 10.2.0.1.0

    Look at the sample code for generating a CSV file that I've just posted in response to a similar question:
    Re: How to execute a proc and spool files in a database job
    And the use the search button in this forum to find sample code for sending a CLOB as a plain/text e-mail attachment using UTL_SMTP.

  • Smart Forms - Attaching HTML file as an attachment in Mail

    Hai,
    I have following requirements. I have to send the Payment Advice document output as a HTML format to the vendors.
    I am able to get the smartforms output as html file. The output of smartforms i am capturing
       call function '/1BCDWB/SF00000170'
          exporting
            control_parameters = w_control_parameters
            output_options     = w_output_options
            user_settings      = 'X'
            w_t001             = w_t001
            w_reguh            = w_reguh
            w_regud            = w_regud
            w_e1idrs1          = w_e1idrs1
          importing
            job_output_info    = w_job_output_info
          tables
            t_item             = t_item
          exceptions
            formatting_error   = 1
            internal_error     = 2
            send_error         = 3
            user_canceled      = 4
            others             = 5.
        w_xmloutput = w_job_output_info-xmloutput.
    *-SAP Smart Forms: Result of XSF Transformation
        w_htmldata  = w_xmloutput-trfresult-content[].
    Currently the w_htmldata informations are stored in the form of RAW 1024 characters.
    Using the below mentioned FM the attachment information i am passing through
           contents_txt               = it_message
    parameters.  The contents_txt support only 255 characters. But the smartforms returns RAW 1024 characters. When the HTML attachment is not showning the content properly and the data displays is misaligned. Kindly give me the suggestion how to overcome this issue !
      call function 'SO_DOCUMENT_SEND_API1'
          exporting
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ''
            sender_address_type        = ''
            commit_work                = 'X'
          importing
            sent_to_all                = w_sent_all
          tables
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
          exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.

    Have you upgraded to Yosemite?  Then you could send the attachment using Mail Drop.
    You can use Mail Drop to send files that exceed the maximum size allowed by the provider of your email account. Mail Drop uploads the large attachments to iCloud, where they’re encrypted and stored for up to 30 days.
    If you have an iCloud account and you’re signed in to iCloud when you click Send, Mail automatically sends the attachments using Mail Drop. Mail Drop attachments don’t count against your iCloud storage.
    If you don’t have an iCloud account, or if you’re not signed in, Mail asks you whether to use Mail Drop (select “Don’t ask again for this account” to always use Mail Drop).
    If a recipient uses Mail in OS X Yosemite, the attachments are automatically downloaded and included in your message just like any other attachment. For other recipients, your message includes links for downloading the attachments and their expiration date.
    You can turn Mail Drop on or off for an account. Choose Mail > Preferences, click Accounts, select your account, click Advanced, then select or deselect “Send large attachments with Mail Drop.”

  • How do I send a large (23mb ) PDF file as an attachment in mail?

    How do I send a PDF mail attachment in mail that is greater than the crazy limit of 23MB?  Thanks for your help!

    Have you upgraded to Yosemite?  Then you could send the attachment using Mail Drop.
    You can use Mail Drop to send files that exceed the maximum size allowed by the provider of your email account. Mail Drop uploads the large attachments to iCloud, where they’re encrypted and stored for up to 30 days.
    If you have an iCloud account and you’re signed in to iCloud when you click Send, Mail automatically sends the attachments using Mail Drop. Mail Drop attachments don’t count against your iCloud storage.
    If you don’t have an iCloud account, or if you’re not signed in, Mail asks you whether to use Mail Drop (select “Don’t ask again for this account” to always use Mail Drop).
    If a recipient uses Mail in OS X Yosemite, the attachments are automatically downloaded and included in your message just like any other attachment. For other recipients, your message includes links for downloading the attachments and their expiration date.
    You can turn Mail Drop on or off for an account. Choose Mail > Preferences, click Accounts, select your account, click Advanced, then select or deselect “Send large attachments with Mail Drop.”

  • Problem in Sending  .txt as an attachment to mail

    Dear Experts,
         I am working on a file to mail scenario. I have searched a lot in sdn, but could not locate the exact answer for the same.
    I am using file adapter to pick up a txt file from a location and supposed to send this as an attachment to mail(in box).
    My scenario is ready, have configured the IR and ID. there are only 5 fields at the sender side, have done one to one mapping at the receiver side.
    question is
    1)  Do I have to use content conversion at the sender side in order to read the file in XI or....
    2)  Can i send the payload of the message as an attachment? Do i have to configure anything else for the same for eg
    3) where i have to configure my sender and receiver, has to be in mail adapter or in xml payload?
    Kindly provide your valuable suggestions or  idea to proceed , as i am confused how to proceed wz the same.
    Thanks
    Virendra

    Hi,
    1) Do I have to use content conversion at the sender side in order to read the file in XI or....
    Since ur source is a .txt file... to convert it to a xml format u need to use the FCC in file adapter.
    2) Can i send the payload of the message as an attachment? Do i have to configure anything else for the same for eg
    You can send the payload of a message as a attachment.
    I hope u dont want to send the XML structure as a attachment... In receiver...first u have to convert the XML to a .txt file and then
    u need to send this .txt as a attachment..
    If this is ur requirement u can do it by using the inbuilt EJB's and  a Mail adapter in receiver.
    The inbuilt bean is MessageTransformationBean... which can convert a XML structure a Text file.
    and then u have to pass it to Mail adapter... Please keep in mind the sequence of processing.
    If clarification needed u can put a post again
    3) where i have to configure my sender and receiver, has to be in mail adapter or in xml payload?
    U need to configure both sender and receiver. Sender is a file adapter and receiver is a Mail adapter.
    Decide first u want to use mail package or not..
    For ur scenario u can do both ways using Payload or XIALL..
    Babu

  • Is it possible to send xls attach in mail in background ?

    is it possible to send xls attach in mail in background ?
    i build/copy program to send attach file in xls format  ,
    its work fine in foreground but do nothing in background  ,
    What can be the reason?
    the section of the sending  :
      DATA: LD_ERROR    TYPE SY-SUBRC,
            LD_RECIEVER TYPE SY-SUBRC,
            LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
            LD_EMAIL LIKE  SOMLRECI1-RECEIVER,
            LD_FORMAT TYPE  SO_OBJ_TP ,
            LD_ATTDESCRIPTION TYPE  SO_OBJ_NAM ,
            LD_ATTFILENAME TYPE  SO_OBJ_DES ,
            LD_SENDER_ADDRESS LIKE  SOEXTRECI1-RECEIVER,
            LD_SENDER_ADDRESS_TYPE LIKE  SOEXTRECI1-ADR_TYP,
            LD_RECEIVER LIKE  SY-SUBRC.
      LD_EMAIL   = P_EMAIL.
      LD_MTITLE = P_MTITLE.
      LD_FORMAT              = P_FORMAT.
      LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
      LD_ATTFILENAME         = P_FILENAME.
      LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
      LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
    Fill the document data.
      W_DOC_DATA-DOC_SIZE = 1.
    Populate the subject/generic message attributes
      W_DOC_DATA-OBJ_LANGU = SY-LANGU.
      W_DOC_DATA-OBJ_NAME  = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
      W_DOC_DATA-SENSITIVTY = 'F'.
    Fill the document data and get size of attachment
      CLEAR W_DOC_DATA.
      READ TABLE IT_ATTACH INDEX W_CNT.
      W_DOC_DATA-DOC_SIZE =
         ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
      W_DOC_DATA-OBJ_LANGU  = SY-LANGU.
      W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR  = LD_MTITLE.
      W_DOC_DATA-SENSITIVTY = 'F'.
      CLEAR T_ATTACHMENT.
      REFRESH T_ATTACHMENT.
      T_ATTACHMENT[] = PIT_ATTACH[].
    Describe the body of the message
      CLEAR T_PACKING_LIST.
      REFRESH T_PACKING_LIST.
      T_PACKING_LIST-TRANSF_BIN = SPACE.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM = 0.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE = 'RAW'.
      APPEND T_PACKING_LIST.
    Create attachment notification
      T_PACKING_LIST-TRANSF_BIN = 'X'.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM   = 1.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE   =  LD_FORMAT.
      T_PACKING_LIST-OBJ_DESCR  =  LD_ATTDESCRIPTION.
      T_PACKING_LIST-OBJ_NAME   =  LD_ATTFILENAME.
      T_PACKING_LIST-DOC_SIZE   =  T_PACKING_LIST-BODY_NUM * 255.
      APPEND T_PACKING_LIST.
    Add the recipients email address
      CLEAR T_RECEIVERS.
      REFRESH T_RECEIVERS.
      T_RECEIVERS-RECEIVER = LD_EMAIL.
      T_RECEIVERS-REC_TYPE = 'U'.
      T_RECEIVERS-COM_TYPE = 'INT'.
    T_RECEIVERS-NOTIF_DEL = 'X'.
    T_RECEIVERS-NOTIF_NDEL = 'X'.
      APPEND T_RECEIVERS.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          DOCUMENT_DATA              = W_DOC_DATA
          PUT_IN_OUTBOX              = 'X'
          SENDER_ADDRESS             = LD_SENDER_ADDRESS
          SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
          COMMIT_WORK                = 'X'
        IMPORTING
          SENT_TO_ALL                = W_SENT_ALL
        TABLES
          PACKING_LIST               = T_PACKING_LIST
          CONTENTS_BIN               = T_ATTACHMENT
          CONTENTS_TXT               = IT_MESSAGE
          RECEIVERS                  = T_RECEIVERS
        EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.
    Populate zerror return code
      LD_ERROR = SY-SUBRC.
    Populate zreceiver return code
      LOOP AT T_RECEIVERS.
        LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
      ENDLOOP.

    Try this example, not sure where I got this, but it works.
    report zmail_excel.
    parameters: p_email   type somlreci1-receiver
                                   default '[email protected]'.
    data: begin of it001 occurs 0,
          bukrs type t001-bukrs,
          butxt type t001-butxt,
          end of it001.
    data:   imessage type standard table of solisti1 with header line,
            iattach type standard table of solisti1 with header line,
            ipacking_list like sopcklsti1 occurs 0 with header line,
            ireceivers like somlreci1 occurs 0 with header line,
            iattachment like solisti1 occurs 0 with header line.
    start-of-selection.
      select bukrs butxt into table it001 from t001.
    *   Populate table with detaisl to be entered into .xls file
      perform build_xls_data .
    * Populate message body text
      clear imessage.   refresh imessage.
      imessage = 'Please find attached excel file'.
      append imessage.
    * Send file by email as .xls speadsheet
      perform send_email_with_xls tables imessage
                                          iattach
                                    using p_email
                                          'Example Excel Attachment'
                                          'XLS'
                                          'TestFileName'
                                          'CompanyCodes'.
    *      Form  BUILD_XLS_DATA
    form build_xls_data .
      constants: con_cret type x value '0D',  "OK for non Unicode
                 con_tab type x value '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
    *constants:
    *    con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    *    con_cret type c value cl_abap_char_utilities=>CR_LF.
      concatenate 'BUKRS' 'BUTXT'
             into iattach separated by con_tab.
      concatenate con_cret iattach into iattach.
      append  iattach.
      loop at it001.
        concatenate it001-bukrs it001-butxt
               into iattach separated by con_tab.
        concatenate con_cret iattach  into iattach.
        append  iattach.
      endloop.
    endform.
    *      Form  SEND_EMAIL_WITH_XLS
    form send_email_with_xls tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription.
      data: xdocdata like sodocchgi1,
            xcnt type i.
    * Fill the document data.
      xdocdata-doc_size = 1.
    * Populate the subject/generic message attributes
      xdocdata-obj_langu = sy-langu.
      xdocdata-obj_name  = 'SAPRPT'.
      xdocdata-obj_descr = p_mtitle .
    * Fill the document data and get size of attachment
      clear xdocdata.
      read table iattach index xcnt.
      xdocdata-doc_size =
         ( xcnt - 1 ) * 255 + strlen( iattach ).
      xdocdata-obj_langu  = sy-langu.
      xdocdata-obj_name   = 'SAPRPT'.
      xdocdata-obj_descr  = p_mtitle.
      clear iattachment.  refresh iattachment.
      iattachment[] = pit_attach[].
    * Describe the body of the message
      clear ipacking_list.  refresh ipacking_list.
      ipacking_list-transf_bin = space.
      ipacking_list-head_start = 1.
      ipacking_list-head_num = 0.
      ipacking_list-body_start = 1.
      describe table imessage lines ipacking_list-body_num.
      ipacking_list-doc_type = 'RAW'.
      append ipacking_list.
    * Create attachment notification
      ipacking_list-transf_bin = 'X'.
      ipacking_list-head_start = 1.
      ipacking_list-head_num   = 1.
      ipacking_list-body_start = 1.
      describe table iattachment lines ipacking_list-body_num.
      ipacking_list-doc_type   =  p_format.
      ipacking_list-obj_descr  =  p_attdescription.
      ipacking_list-obj_name   =  p_filename.
      ipacking_list-doc_size   =  ipacking_list-body_num * 255.
      append ipacking_list.
    * Add the recipients email address
      clear ireceivers.  refresh ireceivers.
      ireceivers-receiver = p_email.
      ireceivers-rec_type = 'U'.
      ireceivers-com_type = 'INT'.
      ireceivers-notif_del = 'X'.
      ireceivers-notif_ndel = 'X'.
      append ireceivers.
      call function 'SO_DOCUMENT_SEND_API1'
           exporting
                document_data              = xdocdata
                put_in_outbox              = 'X'
                commit_work                = 'X'
           tables
                packing_list               = ipacking_list
                contents_bin               = iattachment
                contents_txt               = imessage
                receivers                  = ireceivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    endform.
    Regards,
    Rich Heilman

  • When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?

    When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?

    gonsa47 wrote:
    When I open it in pages or word the correct company logo appears.
    Does the mail app display whatever is in the document without the ability to differentiate between hidden or non hidden images?
    The mail app will not display fillable form fields in PDF files that can be seen in real PDF apps. I say real PDF apps because the form fields in PDF apps will not appear in the iBooks app either. IMO, iBooks is not a real PDF app.
    So, I would say that the mail app cannot differentiate between hidden and non hidden items

  • File attachement in mail adapter

    Hi ,
    I need to send users an error report which I have captured in the form of a file. Is it possible to attach this file as an attachement via mail adapter. I have been reading that the payload can be sent as attachment by specifying the interface namespace and interface name. But my requirement is to trigger the mail once the file has been completely written and not for every message. The reason being I could have 3000 records in the file and I dont want to send 3000 MAILS out but just 1 mail for the entire 3000 records...
    Thanks,
    Teresa

    Hi Teresa,
    I hope, I understand you right.
    When you use the file-adapter for sending the file, you can without mapping send this file out to a mail receiver as attachment, there is nothing special to do.
    Regards
    Stefan

  • Need to sent alv output as html or as pdf attachment in mail

    +Hello
    I want to send an ALV output as attachement in html or as pdf format. how to do that? line size is greater than 600(nearly 40 fields).
    +please help me in this query.
    Regards
    Guruvayurappan
    Moderator Message: Please search before posting your question. Thread locked.
    Edited by: Suhas Saha on Dec 29, 2011 4:57 PM

    Hi,
    For sending the ALV output as PDF attachment, you can create a spool (proper page size in print parameters) and convert the spool to PDF using the FM CONVERT_ABAPSPOOLJOB_2_PDF and then send the same as attachment in mail.
    For send the data as HTML attachment, try the below FMs
    WWW_ITAB_TO_HTML_HEADERS & WWW_ITAB_TO_HTML_LAYOUT to create the HTML layout
    WWW_ITAB_TO_HTML to create the HTML for the actual data.
    Hope this helps you.
    Regards,
    Sachinkumar Mehta

  • File attachment in mail missing

    I am using iphone to read my corporate emails. I received an email with attachment 8MB and was asked to download full message. Once I downloaded the full message, the attachment was missing and a text message (See attached file: filename.zip) was replaced. If I forward the email, the recipient did not received the attachment, even if I chose Include attachment option. Where did the attachment goes? How do I solved this problem?

    Hi Jagesh,
                 The content  type of the Pdf has to be identified, in order to conver the pdf successfully, You need to perform the conversion usign the PayloadSwapBean the  Module tab. You use this when you want to receive attachment using Mail adapter. You need to configure few steps in Module Configuration
    There you need to mention your MIME header paramenters Content-Type, Content-Description.
    How this can be configured and how process with PayloadSwapBean check the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
    Module Processor
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/content.htm
    Regading  MessageTransformBean, Migrating Dispatcher Classes
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
    Regards,
    Prasanna

  • Sending a excel sheet as attachment in mail

    Hi,
    I have requirement where I need to send excel sheet as attachment in mail. I could do it by using FM SO_NEW_DOCUMENT_ATT_SEND_API1. But, I am not able to format the excel sheet before sending.
    I need to make heading bold, fix column width and wrap text in some cells, and send the mail.
    Pls help me with your suggestions.
    Thanks,
    Siva.

    this link will show you how to do formatting in Excel using the OLE method, then use that EXCEL to send the MAIL using your program \
    [OLE-format excel |http://www.sap-img.com/abap/download-to-excel-with-format-border-color-cell-etc.htm]
    Hope That Helps
    Anirban M.

  • How do I send an attachment as an attachment in Mail?

    How do I send an attachment as an attachment in Mail?  What should my mail settings be?  When I click attachment, it displays the whole attachment in the email.

    Have you upgraded to Yosemite?  Then you could send the attachment using Mail Drop.
    You can use Mail Drop to send files that exceed the maximum size allowed by the provider of your email account. Mail Drop uploads the large attachments to iCloud, where they’re encrypted and stored for up to 30 days.
    If you have an iCloud account and you’re signed in to iCloud when you click Send, Mail automatically sends the attachments using Mail Drop. Mail Drop attachments don’t count against your iCloud storage.
    If you don’t have an iCloud account, or if you’re not signed in, Mail asks you whether to use Mail Drop (select “Don’t ask again for this account” to always use Mail Drop).
    If a recipient uses Mail in OS X Yosemite, the attachments are automatically downloaded and included in your message just like any other attachment. For other recipients, your message includes links for downloading the attachments and their expiration date.
    You can turn Mail Drop on or off for an account. Choose Mail > Preferences, click Accounts, select your account, click Advanced, then select or deselect “Send large attachments with Mail Drop.”

  • Powerpoint attachment in mail crashing in IOS 4.1 on 3GS

    I upgraded to IOS 4.1 yesterday on my 3GS. When I try to open a powerpoint attachment in mail it starts to open and then mail just shuts down and I can't get the attachment to open. Some Powerpoints open correctly, and some crash. I think the ones that crash have more slides in them.
    This was not an issue with IOS 4.0.

    Exact same issue here on an iPhone 4
    No problems on iOS 4.02. Crashing on some PPT mail attachments in 4.1
    My colleague has the same issue as well

  • Require PDF File attachment in Mail

    Hi Experts,
    I am doing the Proxy-XI-Mail scenario. I am sending the Mail related data like Content, Content_Type from R/3 to XI and configured the Mail receiver adapter.
    R/3 coding:-
    G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_TYPE = 'application/pdf;name="filename.pdf"'
    G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT = G_CONTENT
    G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-FROM = From_Mail.
    G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-TO = To_Mail.
    and then calling the client proxy
    ID Mail Receiver configu:-
      Selected Use Mail Package option
      Content encoding  base64
      Keep attachment option is also selected.
    I am geeting the Filename.pdf in mail as attachment.
    Problem is:- I am not able to open the attached PDF File and error is:- 'Adobe Reader could not open filename,pdf because it is either not a supported file type ot because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded'
    I think some conversions may be required to convert the XML Payload data into PDF file format for the Mail receiver adapter.
    Please suggest
    Thanks & Regards
    Jagesh

    Hi Jagesh,
                 The content  type of the Pdf has to be identified, in order to conver the pdf successfully, You need to perform the conversion usign the PayloadSwapBean the  Module tab. You use this when you want to receive attachment using Mail adapter. You need to configure few steps in Module Configuration
    There you need to mention your MIME header paramenters Content-Type, Content-Description.
    How this can be configured and how process with PayloadSwapBean check the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
    Module Processor
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/content.htm
    Regading  MessageTransformBean, Migrating Dispatcher Classes
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
    Regards,
    Prasanna

  • I am unable to open my PDF attachment in mail.

    I cannot open my PDF attachment in mail. I am able to on all of my other apple products but not my air. Is there a setting that i might have wrong?

    If it is your own pdf and you are unsure of your password, you are out of luck. You will need to create a new file from the original documents. I suggest using password managers, if you need to create many different documents with different passwords.

Maybe you are looking for

  • DVD drive no longer works

    HP Pavillion dv9812us VistaService pack 2 32bit. DVD no longer works. It isn't listed in device manager to enable driver reload or update. E:/ letter also is no longer there when using windows explorer.

  • Horizontal Line & Non-Horizontal line...

    I tried to fix the Horizontal Line and Non-Horizontal line because it is not work. I put the public void paint(graphic g) then I already put the rectangle -> g.drawrect(100,100,300,250) 2) Horizontal Line: y-coordinate is 300 --> g.drawline(0,0,0,300

  • Hebrew problem when saving reports

    Hi, There are two users in the same department who have the ability to save reports. The reports are saved in Plus and are in Hebrew. One of them has no problem while the other has the problem whereby the Hebrew in the parameters and titles are all u

  • Multipart message from Mac with particolat structure

    My application try to parse a mail but throws an exception like: "Missing start boundary" on a message with a internal structure very strange. My message is a multipart/mixed message sended from Microsoft-Outlook-Express-Macintosh-Edition/5.0.3 Conte

  • GUI status in OOPS in ALV

    Hi Gurus,   Am developing the ALV report in OOPS. In that report am displaying 2 grids one after the other. My problem here is am getting the tool bar separately for the 2 grids. So i disabled the tool bar for two grids in layout. And i copied the st