Attachment is uploaded the filed in OPTY has to be updated automatically

Hi everyone,
I have requirement whenever the attachment has been added there is the filed in OPTY that has to automatically updated to "YES"
Can u please help out
Regards
Laksh

the billing plan needs to be regenerated - in standard this would be done manually - not sure if that BADI will help
create an ABAP to run nightly to check for changes to milestones billing % and then update those contracts - regenerate billing plan dates - delete old lines and then click on create dates button for the contract line item

Similar Messages

  • The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    Hey there Luba_kalstad,
    It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section down toward the bottom if needed:
    Unable to locate a Wi-Fi network
    Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
    Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
    If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
    Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I've just updated itunes and it has disappeared from my PC- the previous shortcut won't work and it can't locate on my file search- this is the second time this has happened when updating itunes- APPLE you're going donw the tubes slowly but surely..

    I've just updated itunes and it has disappeared from my PC- the previous shortcut won't work and it can't locate on my file search- this is the second time this has happened when updating itunes- APPLE you seem to be going down the tubes slowly but surely..

    its not apple going "down the tubes" its that you have windows junk.  These opinion best left at apple.com/feedback
    you need to completely uninstall itunes and all components
    see these for help
    http://support.apple.com/kb/HT1925
    http://support.apple.com/kb/HT1923
    Peace, Clyde

  • HT4623 i have the first ipad which has never been updated. How can i do this

    my ipad is version 3.2.2 (7B500) , model MB293LL but has never been updated and i want to know how this can be done?

    See Here  >  http://support.apple.com/kb/HT4972
    Note:
    The iPad 1 can only update as far as iOS 5.1.1

  • The tab bar in Safari does not update automatically

    Hello,
    I have a strange problem with Safari full screen mode and the tab bar always displayed, it does "not update" alone. In fact when I, for example, two tabs and I created a third (by clicking a link) it does not appear immediately. I have to either click on the tab bar and pretend to move one, either click the "Naviagtion tabs" for bar tabs emtte update.
    A little heavy, huh?
    All my software are up to date and even reinstalled recently, but the problem is still present.
    OS X Lion Mountain / / Safari 6.0.2
    Regards

    I solved the problem by uninstalling Glims.

  • Is there a way to tell if a received email contains an attachment to tell the sender if it has been opened?

    I received an email with no attachment (and no indication in the text that there should be an attachment) but it also has the paper clip icon. This makes me wonder if the sender is checking to see if I've opened the email. Is there any way to find out (apart from asking directly)?

    Thank you for such a prompt reply. It was just a regular, personal type email, which is what made me wonder about the attachment icon. Anyway, you've answered my question in that there's no way to find out so I'll stop worrying about it. Thanks again.

  • HT2513 The date on my dock does not update automatically ? - Ps anybody.

    I use MACCBOOK PRO with OS X ver 10.6.8.
    I  Cal Version 4.0.4 (1395.7)
    Sometimes the current date does not update on my ical icon in the dock. After clicking on it the date becomes OK.
    I would appreciate if someone has a solution.

    I solved the problem by uninstalling Glims.

  • The descriptions for materials are not being updated automatically inside of APO

    Hi All,
    We did some changes in material master descriptions in ECC. After the weekly run of integration models also these changes are not updating in APO.
    Please let me know do we need to changes in integration models or CIF settings.
    Advance Thanks.
    Prasad

    Hello Giri
    I am giving some general guidelines on Master Data transfer using CIF. This will likely resolve your issue.
    By running below programs in their order, you will be able to achieve Periodic Data Transfers through Batch Jobs.
    Generate integration model - RIMODGEN  (Same as CFM1)  and
    Activate integration model - RIMODAC2 (Same as CFM3)
    And transaction CFP1 or program RCPTRAN4 can be used for Processing change pointers
    This approach will transfer the differential data w.r.t Master data. It will also help minimize data transfer related to master data.
    Transaction CFC9 :
    For master data it is commonly used - Option#1 of "ALE Change Transfer, Periodic" from CFC9. Changes to master data objects in ECC are recorded and then transfer of the changes is done periodically.
    However if required, it can be transferred Immediately using Option#2 of "BTE Transfer, Immediately" from CFC9.
    If Option#1 selected then,
    1.CIF Message types must be activated for change recording. Transaction BD50
    2.Activate Change Pointers. Transaction BD61.
    3.The fields relevant to a message type to be selected. Transaction BD52
    4.Table BDCPV can be used to view Change pointers.
    Please check:  SAP Note 533755 - Description of the delta logic or the program RIMODINI. This note has some key recommendations on use of RIMODINI/CIF Delta Logic
    Hope this will help.
    Thank you
    Satish Waghmare

  • How to upload the exported report without data to BO ?

    Hi all,
    The version is BO XI3
    As captioned, there is data in the exported report. while upload the report to BO in java program, even  setKeepSavedData(false) , but the uploaded report still has data.
    IReport boReport = (IReport) reports.get(0);
    IFiles boReportFiles = boReport.getFiles();
    IRemoteFile boReportFile = (IRemoteFile) boReportFiles.get(0);
    boReportFile.overwrite(localFileName);
    boReportFile.commit();
    boReport.setKeepSavedData(false);
    boReport.refreshProperties();
    infoStore.commit(reports);
    How to upload the exported report ( which has data) without data to BO in java program ?
    Thanks
    Forest

    Exported report will always have data. Simply copy ther eport from the FRS server to where ever. Un-clear why you would want to do this.

  • Errors while uploading the attachment.

    Hi ,
    I am getting the following error when I upload the document using Attachment Feature of ApplCore:
    Event generated by user 'weblogic' at host 'CIS'. Content item 'aaroraidcidcor000208' was not successfully checked in. The content type 'ADENG' is not defined in the system. [ Details ]
    An error has occurred. The stack trace below shows more information.
    +!csUserEventMessage,weblogic,CIS!$!csUnableToCheckIn,aaroraidcidcor000208!csCheckinFieldErrorMsg,csCheckinFieldError_type,ADENG+
    intradoc.common.ServiceException: !csUnableToCheckIn,aaroraidcidcor000208!csCheckinFieldErrorMsg,csCheckinFieldError_type,ADENG
    at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2071)
    at intradoc.server.Service.buildServiceException(Service.java:2207)
    at intradoc.server.Service.createServiceExceptionEx(Service.java:2201)
    at intradoc.server.Service.createServiceException(Service.java:2196)
    at intradoc.server.DocServiceHandler.validateMetaData(DocServiceHandler.java:1680)
    at intradoc.server.DocServiceHandler.validateCheckinData(DocServiceHandler.java:1541)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    Please tell me where can I create "ADENG" content type in UCM or do I need to pass it from Attachment functionality.
    Regards
    Aradhana

    Which version of UCM are you using? UCM 10g had different default content types and came with ADENG, ADHR, ADMFG etc. already created . 11g has a different set of content types which does not include ADENG. These content types are really just examples to get the system started an operational and would not ever be used in production (I hope).
    You can add the ADENG content type Administration > Admin Applets > Configuration Manager > Options > Content Types...
    A better solution would be to see where ADENG is being set in the code you should be able to change the dDocType setting to something supported in UCM 11g like 'document'
    Tim
    Edited by: Tim Snell on 23-Aug-2010 01:38
    Edited by: Tim Snell on 23-Aug-2010 01:38

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • How can I start anew with Photos and clear the (minimal) stuff it has uploaded

    I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
    more than I have-and of course it got stuck there, like it has for the last week.
    I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So  i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    <Re-Titled By Host>

    How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    It is hard to say from your post, why the migration did not succeed in your case.
    by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang?  Or did already the upgrade to the Photo Library fail?
    If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
    Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
    To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions.  (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
    If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
    Can you launch Photos at all?  If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

  • Error while uploading the attachement in IW32.

    Hi,
    Getting the error message "Include file in PC application Try again?" in the message box "Read Error during PC Upload"
    while uploading the attachement in IW32.

    hello
    The issue is no application issue but BC one. are you using Office 2007 or 2003 or 2010?
    please first check the information from OSS note 1237688, and see if entries exist for the Office release document classes (for exmple docx, xlsx etc.) in OAD2.
    i hope can be any of help.
    Regards,
    Jane

  • I am facing a problem while deploying an Entity bean in iPlanet(sp3).I have attached the exception thrown.Why has this exception occured?

    [04/Dec/2001 10:54:00:2] error: EBFP-marshal_internal: internal exception caught in kcp skeleton, ex
    ception = java.lang.NullPointerException
    [04/Dec/2001 10:54:00:2] error: Exception Stack Trace:
    java.lang.NullPointerException
    at java.util.Hashtable.get(Hashtable.java:321)
    at com.netscape.server.ejb.SQLPersistenceManager.<init>(Unknown Source)
    at com.netscape.server.ejb.SQLPersistenceManagerFactory.newInstance(Unknown Source)
    at com.netscape.server.ejb.EntityDelegateManagerImpl.getPersistenceManager(Unknown Source)
    at com.netscape.server.ejb.EntityDelegateManagerImpl.doPersistentFind(Unknown Source)
    at com.netscape.server.ejb.EntityDelegateManagerImpl.find(Unknown Source)
    at com.kivasoft.eb.EBHomeBase.findSingleByParms(Unknown Source)
    at samples.test.ejb.Entity.ejb_home_samples_test_ejb_Entity_TestEntityBean.findByPrimaryKey(
    ejb_home_samples_test_ejb_Entity_TestEntityBean.java:126)
    at samples.test.ejb.Entity.ejb_kcp_skel_TestEntityHome.findByPrimaryKey__samples_test_ejb_En
    tity_TestEntity__int(ejb_kcp_skel_TestEntityHome.java:266)
    at com.kivasoft.ebfp.FPRequest.invokenative(Native Method)
    at com.kivasoft.ebfp.FPRequest.invoke(Unknown Source)
    at samples.test.ejb.Entity.ejb_kcp_stub_TestEntityHome.findByPrimaryKey(ejb_kcp_stub_TestEnt
    ityHome.java:338)
    at samples.test.ejb.Entity.ejb_stub_TestEntityHome.findByPrimaryKey(ejb_stub_TestEntityHome.
    java:85)
    at samples.test.ejb.TestEJB.getGreeting(TestEJB.java:51)

    Hi,
    I think you are trying to test the Hello world EJB example shipped with the product. As a first
    step I would recomend you to go through every line of the document on deploying this application,
    since, I too have experienced many errors while trying to deploy the sample applications, but on
    following the documentation, I subsequently overcame all the errors and have been working with the
    applications. So please follow the steps in documentation and let me know, if you still encounter any
    issues.
    Regards
    Raj
    Sandhya S wrote:
    I am facing a problem while deploying an Entity bean in iPlanet(sp3).I
    have attached the exception thrown.Why has this exception occured?
    [04/Dec/2001 10:54:00:2] error: EBFP-marshal_internal: internal
    exception caught in kcp skeleton, ex
    ception = java.lang.NullPointerException
    [04/Dec/2001 10:54:00:2] error: Exception Stack Trace:
    java.lang.NullPointerException
    at java.util.Hashtable.get(Hashtable.java:321)
    at
    com.netscape.server.ejb.SQLPersistenceManager.<init>(Unknown Source)
    at
    com.netscape.server.ejb.SQLPersistenceManagerFactory.newInstance(Unknown
    Source)
    at
    com.netscape.server.ejb.EntityDelegateManagerImpl.getPersistenceManager(Unknown
    Source)
    at
    com.netscape.server.ejb.EntityDelegateManagerImpl.doPersistentFind(Unknown
    Source)
    at
    com.netscape.server.ejb.EntityDelegateManagerImpl.find(Unknown Source)
    at com.kivasoft.eb.EBHomeBase.findSingleByParms(Unknown
    Source)
    at
    samples.test.ejb.Entity.ejb_home_samples_test_ejb_Entity_TestEntityBean.findByPrimaryKey(
    ejb_home_samples_test_ejb_Entity_TestEntityBean.java:126)
    at
    samples.test.ejb.Entity.ejb_kcp_skel_TestEntityHome.findByPrimaryKey__samples_test_ejb_En
    tity_TestEntity__int(ejb_kcp_skel_TestEntityHome.java:266)
    at com.kivasoft.ebfp.FPRequest.invokenative(Native Method)
    at com.kivasoft.ebfp.FPRequest.invoke(Unknown Source)
    at
    samples.test.ejb.Entity.ejb_kcp_stub_TestEntityHome.findByPrimaryKey(ejb_kcp_stub_TestEnt
    ityHome.java:338)
    at
    samples.test.ejb.Entity.ejb_stub_TestEntityHome.findByPrimaryKey(ejb_stub_TestEntityHome.
    java:85)
    at samples.test.ejb.TestEJB.getGreeting(TestEJB.java:51)
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Hi, my trial version of Lightroom 5 has recently expired and I have now fully bought it. I have uploaded the CD onto my Mac, but when I open the Lightroom application again, it still says the trial has expired. Does anybody know how I can update it so I c

    Hi, my trial version of Lightroom 5 has recently expired and I have now fully bought it. I have uploaded the CD onto my Mac, but when I open the Lightroom application again, it still says the trial has expired. Does anybody know how I can update it so I can finally use it again? I really appreciate any help!! Thank you!

    Joanne please remove your current installation of Photoshop Lightroom using the uninstallers located in the Applications/Utilities/Adobe Installers.
    You will then want to download Adobe Photoshop Lightroom 5.7.1 from Adobe - Lightroom : For Macintosh.  The update contains the entire application.  Photoshop Lightroom can not be installed through the Adobe Creative Cloud Desktop application and still be licensed with a serial number.

Maybe you are looking for