Attachments allowed on all boards

We have just enabled attachments so you can now attach a file to your post. For example, you can add screen captures or log files to your post to describe your problem.
The max file size is about 5mb and the possible file types currently include
jpg,gif,png,pdf,log,txt
Naturally our general guidelines also apply to all attachments.
edit: we have added .png but removed .bat-files. These have been requested but as they pose a possible security risk, we suggest that you to first rename any .bat file to a .txt file.
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

Nokia Support Discussions is a user-to-user forum, you simply post your question in the relevant board of the forum and our users will respond to you. Three of our boards are dedicated to different phone models:
(1) "N-series and S60 smartphones" for all S60 phones except E-series.
(2) "E-series and communicators" for E-series and 9000-series
(3) "Phones" for s30 and s40 models.
If you wish to discuss directly with Nokia personnel, you need to follow the 'Contact us' link above for details of telephone and e-mail contacts for Nokia Care in your country or region.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Similar Messages

  • How to Set-CasMailbox -ActiveSyncAllowedDeviceIDs (To Allow for all user devices, where I don't know what devices the user has)

    I need to change this for all of our users and have created this script so far.  Does anyone know how to Allow for all devices?  
    $mailboxes = Get-casMailbox -Filter {hasactivesyncdevicepartnership -eq $true -and -not displayname -like "CAS_{*"} | Get-Mailbox 
    foreach ($mailbox in $mailboxes)
        #write-output $mailbox.UserPrincipalName
        $devices = Get-MobileDevice -Mailbox $mailbox.UserPrincipalName
        foreach ($device in $devices){
            #write-output $device.deviceid
              Set-CASMailbox -identity $mailbox.UserPrincipalName -ActiveSyncAllowedDeviceIDs @{Add=$device}
              write-output $mailbox.UserPrincipalName
              write-output $device.deviceid

    For Exchange issues post in Exchange.  You should also just try searching.
    http://social.technet.microsoft.com/Forums/exchange/en-US/1ddc526d-f147-444c-a7bb-39d14415f9bc/clear-activesyncalloweddeviceids
    This was first on list.
    ¯\_(ツ)_/¯

  • Attachments visible in all steps of GP

    Hello SDN Community,
    I have got a question concerning Attachments in GP:
    At the customer we implemented, that A user is able to add an attachment in the step, which has been assigned to him. In the next step another user should be able to have a look at the attachment, yet this attachment is only shown in the Runtime view called "Additional Resources" an not next to the attachment sign in the step itself (here I mean the little paper clip which is shown in the upper right corner of the step iview).
    This means if  user1 has added an attachment in step1, user2 is not aware of the fact, that user1 has added an attachment, because in step2 the number 0 is shown next to the paper clip sign. If user2 wants to have a look at the attachment he has to open the Additional Ressources view.
    For me it is clear, that the number 0 is shown in step2, because the number of attachments is combined with the actual step and not with the whole process. If the user wants to see all attachments he has to use the additional resouces view. Yet for the customer it's not logical.
    Now the question is: Is it possible to configure somehow, that the number of attachments (for the whole process) is shown near the paper clip sign in every step?
    Kind regards
    Lissi

    Hi Lissi,
    This is not a custom <b>iView</b> but a custom <b>Runtime View</b>, Check this out for more information: <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/45/01754e5ba20c4be10000000a11466f/frameset.htm">Custom Runtime Views API in GP</a>
    Hope this helps!
    Best regards,
    David

  • Can't open attachments in mail, all I can do is save files.

    Before I updated to ios5, I was able to open mail attachments by choosing an app. Now all I can do is save the file. If I use gmail directly, I can use an app to view an avi file so it's not the app as I had previously thought. Any suggestions?

    annhadz wrote:
    I'm trying to open avi files with either goodplayer or oplayer. I can open them with oplayer if I get my email on the web instead of in mail which makes me think the issue is with mail.
    That would be a good guess, and it will probably be addressed in an upcoming update, but it sounds like you are getting along OK for now

  • Mic problems with all boards thread! What do we do to fix this or do we need a new boa

    I have come the conclusion that this is not just a mic problem but a uni'versal line in problem since several devices can be connected thru my SoundBlaster Li've! 24-bit line in port. I'm assuming its a software problem and it seems to be a common problem. The second possibilty is that part of the board is either defected or assembled incorrectly. Either way everyone seems to have made sure that:
    A. there drivers are up to date.
    B. they have dissabled any other audio device in windows or in BIOS.
    C. there mic won't work no matter what port they attempt.
    D. creative software changes of audio devices and mixer still don't change anything.
    I came on here for answers yet all i find is questions.
    And all seem to be pretty similar. There are many other posts pertaining individual audio cards, yet they all have the same problem. If your having the same problem post here and keep this thread ali've, if you have an answer to your own problems you'd like to share post it here. Hoping for a Creative response to either my post or one of the many other posts on the same subject.Message Edited by syferus on 09-23-2005 0:30 AM

    If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
    If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible.

  • How do I get firefox to stop asking me to allow personas and just let it allow them all?

    I'm installing many personas but i'm tired of it asking me to allow the site all the time. Is there a way to get that to stop?

    Make sure that the getpersonas.com site is listed as an install exception:
    Tools > Options > Security : "Warn me when sites try to install add-ons": Exceptions
    Make sure that you do not use [[Clear Recent History]] to clear the 'Site Preferences'.

  • Add server ip as allowed to all computers firewalls

    I need to allow a server to bypass all clients (win7) firewalls
    I would need to create a gpo under the computer configuration >
    Policies> windows Settings>
    Security Settings>Windows Firewall with Advanced Security > global Settings >
    Inbound Rules.
    under the Remote scope I would add the server's ip address. 1.1.1.1
    ==============
    this there a better/different way to do this? do I need to enable loopback ?
    thank you

    Hi Total,
    You do not need to enable loopback processing. Additionally, firewall rules defined in group policy are by default treated as additive to the local firewall policy configuration so long as the rule GUIDs are different.
    If you choose a predefined rule then the GUIDs will match in which case the configuration defined in domain-based group policy will win over local group policy or rules defined within the Windows Firewall mmc.
    In short, what you're proposing is fine and if the computers are all domain joined the best way of natively doing this (i.e. deliberately excluding SCCM).
    Cheers,
    Lain

  • Attachments as Icons all the time

    How do I get my attachments to be viewed as icons all the time? I don't like the preview.

    There is a shareware plug-in called Mail Attachments Iconizer that can do that for you.
    G4 933 mhz Quicksilver   Mac OS X (10.4.8)   Wacom Intuos 2 tablet; Epson 2400 Photo; HP Deskjet 6840; LaCie 80gb D2 FWDV

  • Why iPhone only allows sync ALL contacts, not selected groups?

    THE OBJECTIVE: To back up the names and phone numbers I've manually input into my iPhone.
    THE MONKEY WRENCH: When I plug my iPhone 3g into my Powerbook, under the Info tab is a Contacts section. The Sync Address Book contacts box is checked, and below that box are two choices: All contacts or Selected groups. Computer will not allow me to choose Selected groups, nor can I check off "Put new contacts created on this iPhone into this group", which sounds like, if working properly, would all me to back up my iPhones names and numbers. Please help!
    If you're feeling motivated, you can check out my still unsolved post about trouble I've been having with synching TV shows and let me know if there's one solution to address both issues. Thanks a gazillion.

    Step 1: Configure your iPhone for iCloud, go to Settings > iCloud and toggle the Contacts to Off. It will ask if you want to Keep your contacts that are present in your iPhone or Delete them. Delete only if you have a backup in your Mac or PC. We will be syncing your contacts again from your Mac or PC and upload it to iCloud.
    Step 2: Now, sync contacts with iPhone using your Mac or PC.
    Step 3: Next, go to Settings > iCloud and toggle the Contacts to On. This will Turn on the contacts again. You will get the following screen once you turn on the contacts under iCloud.
    Step 4: You can click on Merge. This will upload your contacts to your iCloud account in a while.
    Step 5: Go to the contacts app to verify if you have only all the contacts synced to your iCloud account.

  • DAP ACL filters - why only 'all allow' or 'all deny'

    Hi folks.
    I'm doing DAP (dynamic Access policies) on an ASA 8.0 for SSL VPN via the AnyConnect client.
    Could someone explain the requirement that ACLs used for Network or Web filters must consist of either all permit or all deny statements (i.e. no mixing permit/denys)
    Also, I'm trying to wrap my head around Downloadable ACLs in general. Do people actually use these (either local to the ASA or downloaded from an ACS, for example)?

    Hi, Troubleshooting is like trying to find a needle in a haystack, right? LOL  I'm always amazed computers work at all:-)
    Hats off to the Microsofts, the Apples, the Adobes and all of the others that do all they do, so I don't mind a glitch here and there.
    You are probably correct about the allow/deny selection for Zone Alarm. I used it at one time and I had a hard time with it due to not understanding what an allow or deny would do:-) Glad you were able to see that.
    The FF vs 3.6.9 from what I have read was all about Security. I was over there late last night reading. Link here:
    http://www.mozilla.org/security/known-vulnerabilities/firefox36.html#firefox3.6.9
    Also, here is some additional info and it covers the DLL preloading attack that is going on:
    http://www.informationweek.com/news/smb/security/showArticle.jhtml?articleID=227400031&cid =nl_IW_SMB_2010-09-09_h
    Microsoft came out on 8/23 on the latter link.
    Thanks for the appreciation:-)  There are many other volunteers on the other Adobe Forums as well and I'm sure they are all appreciated. Many have been on the other Forums for a very long time. I'm always amazed at the number of posts they have accumulated over the years! Very Hi-Tech people over there!
    Regards,
    eidnolb

  • Force Mail (Yosemite) to display all attachments as icons all the time?

    In Yosemite, I need to get rid of Mail's previews of attachments that appear in outgoing email as the previews seem to cause problems for some of my mail recipients. How can I force Mail to display all attachments as icons? Currently the only way is to right click each attachment every time - it's a waste of time to do this all day long.

    Mail only previews single-page documents. They should be simply an attachment to the recipient. If they are problematic, then be sure you select the Edit menu, Attachments > Always send Windows friendly .... If there is still a problem then compress the attachment before sending it - CTRL- or RIGHT-click and select Compress from the context menu.

  • 870A-G54 V3.1 instant FF on POST, all board LEDs and fans on.

    Trying to get  a 870A-G54 V3.1 working. I get instant FF on a PCI POST card, all the blue LEDs and fans are on, so is the red LED on the overclock button. I have 16 gig of new Patriot DDR3 plugged in and an AMD Phenom 2 X2 555 CPU I know is good because I pulled it off an AM2+ box it's been running in for a while.
    The board is a used freebie, condition unknown due to the giver not having an AM3 CPU to test it.
    I have no other AM3 CPU or any other DDR3 RAM to try. Is there any way to make it load the latest BIOS off a USB stick? Or am I going to have to dig up some old single core Sempron just to flash the latest BIOS? I've run into this problem many times over the years, pretty much since the first PC boards with flash BIOS.
    Or could it be that a 330W supply just isn't enough, even with a piddly little low profile nVidia GT520?
    Would be nice to know if the board's just defekt or if it's something fixable. In some searching on this, I've found this same instant FF issue with this exact model MSI board quite a lot.
    Right now this board is shoved to the back burner, I ordered a surplus/new OEM board from a different manufacturer, and will also get a nice 80% efficient 500W supply. I've a system to get built and fiddling with a problem board isn't getting it done.

    Quote from: badboy2k on 13-March-14, 22:55:48
    1: what is the boards serial number (leave off the last 3 digits)? (should be on the rear of the board so I can give you an idea of what BIOS version it has)
    Only number is by the CPU socket, B316023***
    Quote
    2: what 330W PSU? (if its a split +12v Rail unit then that could very well be the problem as it will be anaemic to say the least and barely passable)
    Ultra ULT-350P label says (+5V 25A +3.3V 18A 150W), (+12V 18A 216W), (-5V 0.6A 7.2W), (-12V 0.6A 7.2W), (+5VSB 2A 10W)
    Quote
    3: also was the 8pin EPS CPU power Header plugged in?
    4 pin plus the other 4 pins connected to two separate drive power wire bundles with a dual molex adapter.
    Quote
    4: what sticks are those DDR3 units eg: 4x4GB??? and what speed are they rated at?
    Patriot PS000562 4GB PC3-10600 1333Mhz. Hmmm, the label lies! Fine print says (2X2GB)Kit. 8 gig will be enough. Got them in an online auction lot from a computer tech school that closed. They're from 2 different batches, T-0009264 and T-0009267. Solder mask is a slightly different shade of green and the PCB material is different color too. Trace layout and chips are the same.
    I have an Antec "earthpower" 500W supply ordered. It has an 8 pin connector.

  • Suggestion to Apple: Allow "delete all" messages on iPhone mail

    Having switched from a Treo, one of the most frustrating shortcomings is the inability to select all emails and delete them. Limiting to deleting one by one is very tedious and time comsuming.
    Apple, please fix this with a software update!

    Hola johnharbo,
    You would be better off submitting this here:
    http://www.apple.com/feedback/iphone.html

  • Newer bios all boards for the nvidia utility

    K7N2 Delta-L bios version 5.6 and K7N2 Delta-ILSR bios version 7.6 can be downloaded here:- http://www.msi.com.tw/program/suppo...?UID=436&kind=1
    K7N2G-ILSR bios version 1.8 is here:- http://www.msi.com.tw/program/suppo...?UID=398&kind=1
    K7N2-L and K7N2G-L bios version 3.9 is here:- http://www.msi.com.tw/program/suppo...?UID=393&kind=1
    works to some degree here

    http://www.msi.com.tw/program/suppo...?UID=398&kind=1
    Not there,and the other one is not there.
    DNS error,page not found.

  • Email attachments: whenever someone sends me a file the Ipad labels it winmail.dat and wont allow me to open it...these are Word, Exce or jpgs.  Does anyone know why this is and how to fix it?  Also, how can you save attachments to a file on the IPad2

    whenever someone sends me a file the Ipad labels it winmail.dat and wont allow me to open it...these are Word, Exce or jpgs.  Does anyone know why this is and how to fix it?  Also, how can you save attachments to a file on the IPad2

    Is this a particular sender, or all of your attchments?  Google winmail.dat and you will see a number of returns that can explain this, but in short, this is the way some e mail providers deal with attachments.  If all of your e mail is coming that way, you need to change a setting on your isp set up.  Perhaps stary here...
    http://www.nytimes.com/2010/11/25/technology/personaltech/25askk.html

Maybe you are looking for